Plugin recommendation for seamless/repetitive patterns?

Hi guys,
I have been using the Artlandia Symmetry Works for AI and am very pleased with the ways it can be tweaked and set up. I am now looking for a similar plug-in for Photoshop, that would allow me to create repetitive patterns, seamless textures etc. It should allow a variety of settings, possibilities to repeat/rotate/mirror the original picture in order to create a pattern for eg. fabrics or fashion design.
Any thoughts/recommendations?
Thanks
Pavel

Artlandia also offers Symetry Shop, which is similar to Symetry Works except it's for Photoshop.
A less expensive option would be ImageSkill's Tile Builder.

Similar Messages

Recommends for seamless texture applications or plug-ins

I am on Mac, both Tiger and Leopard and I am in CS3.
I am a professional image editor and 3D designer. I take a lot of high resolution images and then spend hours manipulating them into seamless textures. I understand that there are still going to be many situations where that will be the reality, simply because of the complexity of the surface and its details.
Every once in a while I like to go out and see if there is a better way. In other words, bust my habits.
Does anyone have any suggestions on plug-ins for Photoshop or stand alone applications that offer this ability? My price range is wide, I purchase based on value, from share ware to gold plated ware.
Thanks everyone who answers.

I won my copy in an online art contest and learned it enough to gain some competence. It really isn't all that complex once you get past the shroud of mysticality in which the UI is wrapped.
There is another venerable application (read that as long in the tooth) which still runs just fine on my Mac Pro with Leopard. TextureMagic does have the capacity to create image based textures, has a Photoshop GUI and the manual is comprehensible. There is a demo as well.
http://www.artissoftware.com/texturemagic/tm-osx.shtml

A Quicktime plugin update is recommended for FF 3.6.4 on mac os 10.4 but no new version is available?

A Quicktime plugin update is recommended for FF 3.6.4 but for mac os 10.4 there is no new version? My current Qt-version is 7.6.4 am I missing something?
== When I updateted to FF 3.6.4

Does this only occur with 10.6.8? I just gave this a try on my 10.8.3 system with AIR 3.6 but couldn't reproduce the crash on quit. However, I also was unable to log into the application due to lack of credentials. Could you please open a bug on this over at bugbase.adobe.com? If we need to log in to reproduce the bug, please send any test credentials to [email protected] Once the bug has been entered, please let me know the bug number so I can attach the symbolicated crash log to the bug report.
Thanks,
Chris
Ps. If you haven't already, can you also try out our 3.7 beta build?
3/26/2013 - AIR 3.7.0.1410 Runtime and SDK Beta

Recommendations for best stabilization plugin

hi all,
i wanted to check in with the premiere pro community and see what people recommend for a stabilization plugin. the last post on this question was back in 2012.
thanks,
lawrence

we have the creative cloud but i'd like to use a stabilizer within premiere
pro for the offline portion of the edit. i have large amounts of footage to
stabilize.
On Wed, Jul 9, 2014 at 10:22 AM, EditorPete <[email protected]>

I just purchased MBP and it is my first Apple computer. How concerned should I be about virus software and what do you recommend for security software?

I just purchased MBP and it is my first Apple computer. How concerned should I be about virus software and what do you recommend for security software?

1. This comment applies to malicious software ("malware") that's installed unwittingly by the victim of a network attack. It does not apply to software, such as keystroke loggers, that may be installed deliberately by an intruder who has hands-on access to the victim's computer. That threat is in a different category, and there's no easy way to defend against it. If you have reason to suspect that you're the target of such an attack, you need expert help.
2. All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files, and to block insecure web plugins. This feature is transparent to the user, but internally Apple calls it "XProtect." The malware recognition database is automatically checked for updates once a day; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders.
The following caveats apply to XProtect:
It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets (see below.)
It only applies to software downloaded from the network. Software installed from a CD or other media is not checked.
3. Starting with OS X 10.7.5, there has been another layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications and Installer packages downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Software certified in this way hasn't actually been tested by Apple (unless it comes from the Mac App Store), but you can be reasonably sure that it hasn't been modified by anyone other than the developer. His identity is known to Apple, so he could be held legally responsible if he distributed malware. For most practical purposes, applications recognized by Gatekeeper as signed can be considered safe.
Gatekeeper has, however, the same limitations as XProtect, and in addition the following:
It can easily be disabled or overridden by the user.
A malware attacker could get control of a code-signing certificate under false pretenses, or could find some other way to evade Apple's controls.
For more information about Gatekeeper, see this Apple Support article.
4. Beyond XProtect and Gatekeeper, there’s no benefit, in most cases, from any other automated protection against malware. The first and best line of defense is always your own intelligence. All known malware circulating on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "trojan horses," which can only have an effect if the victim is duped into running them. The threat therefore amounts to a battle of wits between you and the malware attacker. If you're smarter than he thinks you are, you'll win.
That means, in practice, that you never use software that comes from an untrustworthy source. How do you know whether a source is trustworthy?
Any website that prompts you to install a “codec,” “plug-in,” "player," "extractor," or “certificate” that comes from that same site, or an unknown one, is untrustworthy.
A web operator who tells you that you have a “virus,” or that anything else is wrong with your computer, or that you have won a prize in a contest you never entered, is trying to commit a crime with you as the victim. (Some reputable websites did legitimately warn visitors who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.)
Pirated copies or "cracks" of commercial software, no matter where they come from, are unsafe.
Software of any kind downloaded from a BitTorrent or from a Usenet binary newsgroup is unsafe.
Software with a corporate brand, such as Adobe Flash Player, must be downloaded directly from the developer’s website. If it comes from any other source, it's unsafe.
5. Java on the Web (not to be confused with JavaScript, to which it's not related, despite the similarity of the names) is a weak point in the security of any system. Java is, among other things, a platform for running complex applications in a web page, on the client. That was never a good idea, and Java's developers have had a lot of trouble implementing it without also creating a portal for malware to enter. Past Java exploits are the closest thing there has ever been to a Windows-style "virus" affecting OS X. Merely loading a page with malicious Java content could be harmful. Fortunately, Java on the Web is mostly extinct. Only a few outmoded sites still use it. Try to hasten the process of extinction by avoiding those sites, if you have a choice.
Java is not included in OS X 10.7 and later. Discrete Java installers are distributed by Apple and by Oracle (the developer of Java.) Don't use either one unless you need it. Most people don't. If Java is installed, disable it — not JavaScript — in your browsers. In Safari, this is done by unchecking the box marked Enable Java in the Security tab of the preferences dialog.
Regardless of version, experience has shown that Java on the Web can't be trusted. If you must use a Java applet for a specific task, enable Java only when needed for the task and disable it immediately when done. Close all other browser windows and tabs, and don't visit any other sites while Java is active. Never enable Java on a public web page that carries third-party advertising. Use it only on well-known, password-protected, secure websites without ads. In Safari 6 or later, you'll see a lock icon in the address bar with the abbreviation "https" when visiting a secure site.
Follow these guidelines, and you’ll be practically as safe from malware as you can be.
6. Never install any commercial "anti-virus" or "Internet security" products for the Mac, as they all do more harm than good, if they do any good at all. If you need to be able to detect Windows malware in your files, use the free software ClamXav — nothing else.
Why shouldn't you use commercial "anti-virus" products?
Their design is predicated on the nonexistent threat that malware may be injected at any time, anywhere in the file system. Malware is downloaded from the network; it doesn't materialize from nowhere.
In order to meet that nonexistent threat, the software modifies or duplicates low-level functions of the operating system, which is a waste of resources and a common cause of instability, bugs, and poor performance.
By modifying the operating system, the software itself may create weaknesses that could be exploited by malware attackers.
7. ClamXav doesn't have these drawbacks. That doesn't mean it's entirely safe. It may report email messages that have "phishing" links in the body, or Windows malware in attachments, as infected files, and offer to delete or move them. Doing so will corrupt the Mail database. The messages should be deleted from within the Mail application.
ClamXav is not needed, and should not be relied upon, for protection against OS X malware. It's useful only for detecting Windows malware. Windows malware can't harm you directly (unless, of course, you use Windows.) Just don't pass it on to anyone else.
A Windows malware attachment in email is usually easy to recognize. The file name will often be targeted at people who aren't very bright; for example:
♥♥♥♥♥♥♥♥♥♥♥♥♥♥!!!!!!!H0TBABEZ4U!!!!!!!.AVI♥♥♥♥♥♥♥♥♥♥♥♥♥♥.exe
ClamXav may be able to tell you which particular virus or trojan it is, but do you care? In practice, there's seldom a reason to use ClamXav unless a network administrator requires you to run an anti-virus application.
8. The greatest harm done by anti-virus software, in my opinion, is in its effect on human behavior. It does little or nothing to protect people from emerging threats, but they get a false sense of security from it, and then they may behave in ways that expose them to higher risk. Nothing can lessen the need for safe computing practices.
9. It seems to be a common belief that the built-in Application Firewall acts as a barrier to infection, or prevents malware from functioning. It does neither. It blocks inbound connections to certain network services you're running, such as file sharing. It's disabled by default and you should leave it that way if you're behind a router on a private home or office network. Activate it only when you're on an untrusted network, for instance a public Wi-Fi hotspot, where you don't want to provide services. Disable any services you don't use in the Sharing preference pane. All are disabled by default.

Seamless repeating pattern - using embedded images with clipping masks

Hi forum,
We struggle a bit creating a seemless repeating pattern that includes embedded images with clipping masks applied.
Our pattern is a 550x550mm black square with various embedded inserted on top. All of these images have Clipping Masks applied to hide unwanted areas.
These images are placed so they create a seamless repeating pattern and this includes areas that overlap the square.
Once we create a swatch from this pattern the repeatable area becomes too big as it includes the unwanted areas hidden by the clipping masks.
Because the repeatable area is now too big it's actually not repeatable.
We tried various things in order to solve this issue. Pathfinder/crop to delete the unwanted areas in the images etc.
None of them worked good enough.
We though of just livetracing the images, but due to the complexity this is not an option.
Do we really have to do our "cutting" in Photoshop or do you know any fancy tricks for issues like this?
Appreaciate your insight
Kenneth

Kenneth,
You may try the destructive deed, with the Clipping Mask selected:
1) In the Transparency palette/panel dropdown list select anything but Normal (Multiply is fine),
2) Object>Flatten Transparency, just keep the defaults including 100% Vector,
3) Shudder.
This should reduce the size to the Bounding Box of the Clipping Path.

Plugin recommendations

Anybody have some recommendations for plugins? I am using version 5.1.4 of FCP. I am particularly interested in graphics, or 3D modeling. I think our graphics guy has After Effects and I could use it, if that works better for those things.

There are about 8 million [plugins|http://www.toolfarm.com/plugins/index.php/Main_Page] for FCP. What do you want to do exactly?
After Effects is not really graphics software, neither is it for 3D modelling.
Photoshop for graphics. Maya for 3D.

Is there a pitch correction plugin available for garageband?

Is there a pitch correction plugin available for garageband?

For the record, I've been using Melodyne in GB for a couple of years now and couldn't get along without it. Had a singer scheduled for four songs that I needed finished demos for in two days. He came recommended, but I'd never actually heard him. turns out he had a voice like Robert Preston, if Robert Preston couldn't carry a tune or keep time. I was facing total failure. But I went ahead and recorded him, warts and all and hoped Melodyne would be up to the task. I even recorded part of one song in B-flat because he was stronger in that key than in G, which is what my other singer had recorded in.
Melodyne turned four utterly unworkable, unusable tracks into decent representations. I was even able to engineer harmony lines that were never recorded. It gives you more editing ability for singing tracks than you get with midi notes.
It's worth the price.

Recommendations for compact Camcorder / Digital Camera combo?

Now that I'm 2 years into fatherhood, I'm finding that I have specific digital habits for which I'm hoping to get some recommendations for a product. Basically, I use a decent Sony camcorder to shoot DV, which I edit in iMovie into little videos. I also have a few digital cameras (point-and-shoot and SLR) to take a big range of still photographs. But I'm getting tired of carrying them all around with me.
What I'm hoping to get is a new product that's small, has good video capture, and still takes good still photos. And most importantly, I need it to work seamlessly with iMovie and iPhoto. Does anyone have any suggestions? I'm really just looking for something that I can put in my pocket and shoot video or stills of my son when he does something cute!
Thanks!

You might want to check out Sony's latest Cyber-shot Digital Camera, the DSC-W300.
It's a point and shoot with video in HD. If you have a nice HDTV, you'll be able to playback the footage easily. I don't know the size of the file for importing into iMovie but your memories will look great.

Is the MacBook Air recommended for working with RAW photographs using Aperture or Lightroom and perhaps Photoshop?

Is the MacBook Air recommended for working with RAW photographs in Aperture and Photoshop, or do I need a more powerful MacBook ? The relative lack of weight of the AIr is what attracts me to it.

For doing Photography with RAW files in either Aperture or Photoshop, the new MacBook Air is fine, but for Photoshop CS6 some of the filters and plugins really need a better graphics card and plenty of RAM.
You'll also want an external disk if you are going to be doing lots of shooting.
Summary:
Yes, you can use an air but you'll want external storage and at least 8GB of ram.
Or go MacBook Pro with 16GB ram with the 650M card.

What software is recommended for the maintenance of mac?

What software is recommended for the maintenance of mac?

How to maintain a Mac
1. Make redundant backups, keeping at least one off site at all times. One backup is not enough. Don’t back up your backups; all should be made directly from the original data. Don’t rely completely on any single backup method, such as Time Machine. If you get an indication that a backup has failed, don't ignore it.
2. Keep your software up to date. In the App Store or Software Update preference pane (depending on the OS version), you can configure automatic notifications of updates to OS X and other Mac App Store products. Some third-party applications from other sources have a similar feature, if you don’t mind letting them phone home. Otherwise you have to check yourself on a regular basis.
Keeping up to date is especially important for complex software that modifies the operating system, such as device drivers. Before installing any Apple update, you must check that all such modifications that you use are compatible. Incompatibility with third-party software is by far the most common cause of trouble with system updates.
3. Don't install crapware, such as “themes,” "haxies," “add-ons,” “toolbars,” “enhancers," “optimizers,” “accelerators,” "boosters," “extenders,” “cleaners,” "doctors," "tune-ups," “defragmenters,” “firewalls,” "barriers," “guardians,” “defenders,” “protectors,” most “plugins,” commercial "virus scanners,” "disk tools," or "utilities." With very few exceptions, such stuff is useless or worse than useless. Above all, avoid any software that purports to change the look and feel of the user interface.
The more heavily promoted the product, the more likely it is to be garbage. The most extreme example is the “MacKeeper” scam.
As a rule, the only software you should install is that which directly enables you to do the things you use a computer for, and doesn't change the way other software works.
Safari extensions, and perhaps the equivalent for other web browsers, are a partial exception to the above rule. Most are safe, and they're easy to get rid of if they don't work. Some may cause the browser to crash or otherwise malfunction. Some are malicious. Use with caution, and install only well-known extensions from relatively trustworthy sources, such as the Safari Extensions Gallery.
Never install any third-party software unless you know how to uninstall it. Otherwise you may create problems that are very hard to solve.
4. Beware of malware. Malware is malicious software that circulates on the Internet. This kind of attack on OS X used to be so rare that it was hardly a concern, but it's now increasingly common, and increasingly dangerous.
There is some built-in protection against downloading malware, but you can’t rely on it — the attackers are always at least one day ahead of the defense. You can’t rely on third-party protection either. What you can rely on is common-sense awareness — not paranoia, which only makes you more vulnerable.
Never install software from an untrustworthy or unknown source. If in doubt, do some research. Any website that prompts you to install a “codec” or “plugin” that comes from the same site, or an unknown site, is untrustworthy. Software with a corporate brand, such as Adobe Flash Player, must come directly from the developer's website. No intermediary is acceptable, and don’t trust links unless you know how to parse them. Any file that is automatically downloaded from the web, without your having requested it, should go straight into the Trash. A web page that tells you that your computer has a “virus,” or that anything else is wrong with it, is a scam.
In OS X 10.7.5 or later, downloaded applications and Installer packages that have not been digitally signed by a developer registered with Apple are blocked from loading by default. The block can be overridden, but think carefully before you do so.
Because of recurring security issues in Java, it’s best to disable it in your web browsers, if it’s installed. Few websites have Java content nowadays, so you won’t be missing much. This action is mandatory if you’re running any version of OS X older than 10.6.8 with the latest Java update. Note: Java has nothing to do with JavaScript, despite the similar names. Don't install Java unless you're sure you need it. Most people don't.
5. Don't fill up your boot volume. A common mistake is adding more and more large files to your home folder until you start to get warnings that you're out of space, which may be followed in short order by a boot failure. This is more prone to happen on the newer Macs that come with an internal SSD instead of the traditional hard drive. The drive can be very nearly full before you become aware of the problem.
While it's not true that you should or must keep any particular percentage of space free, you should monitor your storage use and make sure you're not in immediate danger of using it up. According to Apple documentation, you need at least 9 GB of free space on the startup volume for normal operation.
If storage space is running low, use a tool such as OmniDiskSweeper to explore the volume and find out what's taking up the most space. Move seldom-used large files to secondary storage.
6. Relax, don’t do it. Besides the above, no routine maintenance is necessary or beneficial for the vast majority of users; specifically not “cleaning caches,” “zapping the PRAM,” "resetting the SMC," “rebuilding the directory,” "defragmenting the drive," “running periodic scripts,” “dumping logs,” "deleting temp files," “scanning for viruses,” "purging memory," "checking for bad blocks," "testing the hardware," or “repairing permissions.” Such measures are either completely pointless or are useful only for solving problems, not for prevention.
Let go of the Windows mentality that every computer needs regular downtime maintenance such as "defragging" and "registry cleaning." Those concepts do not apply to the Mac platform. The machine should not be a focus of your attention. You shouldn't have to think about it at all. It should be a transparent, almost unnoticeable tool by means of which you communicate, work, and play. If you want a computer that depends on you to keep going, use a PC.
The very height of futility is running an expensive third-party application called “Disk Warrior” when nothing is wrong, or even when something is wrong and you have backups, which you must have. Disk Warrior is a data-salvage tool, not a maintenance tool, and you will never need it if your backups are adequate. Don’t waste money on it or anything like it.

Recommendations for a new monitor?

Greetings,
I'm looking for a new monitor for my Powermac G4 450 MHz AGP (sawtooth).
I'm currently using a Formac Gallery 1740 after 6 years it's starting to faded out on me.
I'd really appreciate any suggestion or Recommendations for a new one.
Aisha K.

I'm using a 17" LCD, Acer model AL1706 on my G4 400MHz AGP. Was plug 'n play and has been flawless over the years. I'm sure the current model numbers are different.
 Cheers, Tom
Here's some Acer model LCD monitors.
http://www.amazon.com/Acer-19-inch-Flat-Panel-Monitor/dp/B0002X8TVW
Message was edited by: Texas Mac Man

Need a printer recommendation for a small office

hey folks, hoping someone might be able to suggest a recommendation for our business. We’ve had an OkiData color laser printer that’s lasted over 6 years but it’s been giving us some trouble over the last year and yesterday it stopped printing with an error we can’t resolve. Would have to bring a tech in to fix and we’d basically already decided that once this thing bit the dust we’d move on to something else. It’s time.
We are looking for something in the $200-$400 range, would consider going a little higher if it was clearly worth it. We want something that connects wireless, prints quickly and reliably in Snow Leopard over an Airport Extreme network, decent color print quality is important but doesn’t have to be photo quality (we have an HP Photosmart for that kind of stuff), and it needs to have reasonable printing cost per page. We don’t print a tremendous amount of stuff, but we probably go through 100-200 pages a day and it adds up.
Was looking at the HP OfficeJet Pro 8500 wireless and that looks like a nice unit except half the people who buy one hate it. Looks like HP quality control is lacking and if you get a good unit, great, but the odds are good you’ll get a lousy one.
Also looking at the Brother HL-3070CW, but reviews say it has a high consumable cost.
Basically, the more I look into this the more I head spins and now I've got myself wrapped around the axle and don’t know what to do.
Any suggestions would be GREATLY appreciated.

I would steer clear of the 500 express. Since you seem to be new to cisco products, I would use the opportunity and buy what most of your potential customers already have. Get yourself a pix/asa and a 2900 series switch as first poster suggested. If you are interested in certifications, you will need to learn the command line interface. The 500 express will do you no good as it is all gui. This is only my opinion of course. Oh, and did I see not expensive and cisco in the same sentence. :)

Recommendation for maintaining pricing in CRM when R/3 is also in landscape

Hi,
in out context we have already SAP R/3 in the landscape, all the pricing in done in R/3. lot of custom pricing routines are also written in r/3.
now we in the process of implementing CRM and plan to do Quotations in CRM and replicate in SAP R/3 . what is the recommendation for such a scenario.
do we replicate all pricing conditions/procedures in CRM? do we need to re-do all procedures in IPC?
can we re-determine pricing in R/3 so that we can avoid such work in CRM? we are using configurable products in R/3.
please share your thoughts/best practices and any document will be of help.
thanks
RH

Hi Swaroop,
The Assignment of Buisness Partner classification from CRM to R3 is purely based on Classification
so your initial Entry
I chose B as classification & Z001 as an account group which is a copy of 0001. System takes it.
was taken by the system
now when you tried to make another Entry by the same Classification
chose B again & this time Z002 acc gp (copy of 0002), and system does not allow?
it checks for the Existing Classification and so does not allow the same
Delete the Previous Entry and then Try Entering the New Entry
The System shall Take it
Hope it Answered your Queries...
Revert Back for any Doubts..
Also Chk the Link for details:http://help.sap.com/saphelp_crm50/helpdata/en/04/4d9ac77b2b11d3b52f006094b9114a/content.htm
Thanks and Regards,
RK.

Any recommendations for a recovery software for my lost photos on my external drive?

Would like recommendations for a reputable recovery software for my lost photos from my external drive that I used with my MacBook Pro.

General File Recovery
If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as Data Rescue II, File Salvage or TechTool Pro. Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive. Two free alternatives are Disk Drill and TestDisk. Look for them and demos at MacUpdate or CNET Downloads.
The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
Also visit The XLab FAQs and read the FAQ on Data Recovery.

Plugin recommendation for seamless/repetitive patterns?

Similar Messages

Maybe you are looking for