PM module report for Order Cost with details of Components

Dear Gurus,
Is there any report in standard SAP to get cost of an Order along with the details of components used with cost.
Thanks.
Shailesh Panchal

Hi,
Service order , you can go to IW33 , extras -> cost report - planned /actual comparison
production order , you can go to co03 , goto->cost -> analysis
Thanks,
sudhakar

Similar Messages

  • Report for failed delivery with reasons

    Hi all,
    Maybe i am blind, but I cant find a way to do an automatic report or email a report for bounced emails with details.
    So I need to get a report with the email address, message number and the reason for the bounce or failure for Example: bounced by destination server. Reason: 5.1.0 – Unknown address error ('554',
    Any where I can do this?
    I see the bounce logs have this information, but short of ftp'ing this daily then writing a script to email this out I cant see how to do this.
    It would be nice to just have a daily email report
    Regards
    Adam

    On box - no easy way that I can think of other than what you've mentioned.  You could however accomplish this (as well as any other custom reports you would want to create) with SawMill (https://www.sawmill.net). 
    This used to be used heavily back when the WSA was first released as on box reporting wasn't up-to-par.  However, it can be used for the ESA as well.

  • Analysis report for standard cost in CK33N

    Hi,
    Analysis report for standard cost
    Using variant Z003 in CK11N.
    Planned cost 3 is the output used for planning and this is adjusted by making changes to the BOM throughout the process
    In CK33 you compare the 2011 cost for the product with the proposed cost for the next year.  For some parts it works and for others it splits the lines,  though the calculation is still correct.
    Regards,
    T.Harish Kumar

    Hi Revital,
    I believe the last option is correct.
    Thanks,
    Gordon

  • Report for Landing cost

    Hi SAP Guru's,
    Do we have any standard report for Landing Cost in the procurements, please suggest.
    Thanks,
    Reddy

    Hi Manish,
              We need to get one report with the total cost of material procurement which includes the excise, transportation and insurance.
    Thanks,
    Reddy.

  • Sales order costing with dependencies

    Hello,
    we have implemented a make-to-order sales order costing with configured materials.
    The routing will be generated automatically based on dependencies.
    Our problem: Costing is not based on the standard values shown in the routing operations but on values coming from dependencies. In some cases these values are different.
    Our sales order costing should based in all cases on the standard values shown in the routing without using dependencies.
    How can we realize this, any idea ?
    Thanks you for your answers
    Nitza

    6.0
    found somewhere in the coding that it's not possible for configured materials, what really surprise me

  • Report for CS15 tcode with multiple material nos. in selection screen.

    I want to develop a report for cs15 but with multiple materials.
    Like in cs15 we enter the material and its plant, then click on multi level check box and get the output. But cs15 works only for a single material. I want to develop a report in which i'll give multiple material nos. and then i should get the output for each material entered just as the output that would appear in cs15 for that material.
    How do i do it.
    I have tried but i'm not able to track back.

    Hi Priti,
          try develop a interactive report which lists all the materials in the first screen and when you double click on each of the material then call transaction CS15 output by skipping the first screen .Use set parameter to pass the material .
    Regards,
    Sirisha

  • Report for time log on detail for each employees in SAP ABAP-HR report

    hi experts,
          please help me .how to create a report for time log on detail for each employees in SAP ABAP-HR report.please help me.
                                                      thank you

    Hi,
    For Time Management Infotypes , If you want to read the data using macro you need to use the Macro called RP_READ_ALL_TIME_ITY
    Example:
    DATA: BEGDA LIKE P2001-BEGDA, ENDDA LIKE P2001-ENDDA.
       INFOTYPES:  0000, 0001, 0002, ...
                         2001 MODE N, 2002 MODE N, ...
         GET PERNR.
       BEGDA = '19900101'. ENDDA = '19900131'.
       RP_READ_ALL_TIME_ITY BEGDA ENDDA.
       IF PNP-SW-AUTH-SKIPPED-RECORD NE '0'.
          WRITE: / 'Authorization for time data missing'.
          WRITE: / 'for personnel number', PERNR-PERNR. REJECT.
       ENDIF.

  • How can i develope a report for getting purchase requisition details

    how can i develope a report for getting purchase requisition details like mrp controller release date unit of measure

    Hi,
      Go to Tcode ME53(Purchase requisition display). Give any preq number and click the item overview button..
    in the next page click select one item and press item details button(or F2 button)..In the next page all your requiresd fields will be there.. put cursor in reqd field and press f1.. in the pop up box press techical details(hammer button) to get the field name as well as the transparent table.. Use those fields and table in ur program..
    hope it helps
    Award points if it helps

  • How can I enter "Flate rates for travel costs" with more than 2 decimals?

    Hi expert,
    I want to enter flat rates for travel costs in table T706F.
    I have a figure with more than 2 decimals (0,066), but I cannot save it, because only 2 decimals are allowed for EUR.
    I don't want to change the decimals for this currency.
    I found OSS note 446116 which is release independent. It is a note of 30.10.2001.
    It suggests to create a new currency e.g. EUR3 and enter translation ratio's and exchange rates.
    This seems pretty drastic.
    Do you know if there is another way to handle this issue?
    Thank you.
    Kind regards,
    Linda Verding

    Hello Christian,
    I have checked it with consultants from SAP Brussels.
    They confirm that OSS note 446116 can be used to create flat rates for travel costs with more than 2 decimals.
    I will create a new currency (EUR3) with the description "for travel expenses only".
    Kind regards,
    Linda Verding

  • Report for Purchasing Documents with Over Delivery or Under Delivery Tolera

    Dear All !
    please suggest me a report for Purchasing Documents with Over Delivery or Under Delivery Tolerance limit.
    thanks n regards
    Naagsekhar

    hi,
    Go to ME2N --> Use dynamic selection, choose for hte Puchase doc item --> here select for the over and under delivery and then execute the report..
    Hope it helps..
    Regards
    Priyanka.P

  • Building Cascading Lists for Query Screens with ADF Business Components.

    I build “Cascading Lists for Query Screens with ADF Business Components”. When I to select master list first working fine, but when I to select master list second returned error : JBO – 25013 : Too many objects match the primary key oracle.jbo.key[CN]. CN dependences with key to detail list (Countries in this case). Please help me.
    Andrew.

    You would have a better chance, that someone answers your question, if you choose the right forum:
    JDeveloper and ADF

  • SAP report to see orders TECO with Details

    Hi All,
    I am looking for a sap report to see all the orders that have been
    TECO'ed by Date (Selection screen - Peroid From - To) & plant.
    I know i can use COOIS & CO26 but i need more details output report
    somthing like who done the TECO, Date and Time
    Any help would be greatly appreciated & duly rewarded
    Regards,
    Sankaran

    Dear,
    Table there is object OBJNR field which you pass to JEST the satatus (I0045 -Tech). For knowing the status details use table  TJ02.
    Or try with Fm READ_STATUS.
    Tables JEST contains the status and TJ02T contains the description of status
    Pass Prod order no to AUFK table and
    Pass the AUFK-OBJNR field to JEST-OBJNR field and take the STAT field which gives status
    for description pass this STAT field and get the description
    or Or See function module PM_ORDER_DATA_READ
    The status maintenace is done by SAPLBSVA
    Hope it will help you.
    Regards,
    R.Brahmankar
    Edited by: R Brahmankar on Nov 19, 2008 12:17 PM

  • Reports for two costing Area With one operating concern

    Hi,
    What are the reports I can get if I am having two different costing area for my comapnies with same operating concern
    Thanks in advance for your input
    CHEERS

    Thanks Sreekanth ,
    I want to what are the reports that will be generated. And what cannot be done if we have two controlling area instead of one.
    CHEERS

  • Purchasing report for orders with GR

    Hi All,
    I need to do reporting on the purchasing values only for PO item with movement type 101,102 and few other related to GR.
    Objective is only PO items where item goods receipt has happened.
    Will the 2LIS_01_ITM do with BWVORG? Or any other extractor needs to be used
    Regards,
    Pal

    You can do it either in data loading level using routine or at Report level.
    I prefer doing it at data load level  ,like manasi said..write routine to filter out unwanted movement types.
    Better keep dso in your model and between dso to cube you write this so that in future you enhance it then you just need to modify the logic between the dso and cube..
    Regards,
    RK

  • Report for Billing doc with payment status and tax details

    Hi All,
    I want the report for payment due billing documents with following fields and after payment is done( F-28 ) that document should not appear in the report for the said period.
    Billing date, Billing doc no, Net value, Tax Amount
    Thanks and regards,

    Dear,
    Check S_ALR_87012172,S_ALR_87012186,S_ALR_87012168, S_ALR_87012197, S_ALR_87012173, S_ALR_87012174.
    Regards,
    Mahesh Wagh

Maybe you are looking for