PO Active/Close indicator

Dear All,
I am using ME2L T-code in order to view POs by vendors and analyse Quantities to be Invoiced and delivered.
The report has many columns in the layout and one of them is Deletion indicator column, showing whether the PO is deleted, not deleted, or blocked.
Is there in the report column showing the PO Active/Close status? or if not, is there other T-code which displays POs with possibility to see Active/Close indicator.
Thanks in advance.

Active means PO is still in use, in other words there are some GRs still to be made until PO is automatically closed and moved to Closed Status. in this case when All GRs are made it is easy to identify whether PO is closed or Active by comparing total GR amounts with PO amount.
But sometimes PO is closed manually, is there any indicator, or PO is not closed manually?

Similar Messages

  • Active Link Indicator in TOC

    Here is an interesting problem that perhaps someone else has
    seen and figured out.
    When I launch my published WebHelp and select a link in the
    table of contents, it sometimes happens that the active link
    indicator (the dotted outline around the selected topic in the TOC)
    is displaced from the actual selected topic and appears above it by
    about one or two topics. Thus, the dotted outline, that has the
    same shape as the actual selected topic, appears to be randomly
    situated in the TOC; it does not outline any particular topic
    listed in the TOC.
    If I re-size the browser, the displaced active link indicator
    "snaps back" onto the currently selected topic and all is well.
    My other projects do not seem to be doing this. This project
    does have some javascript running on the content pages but I don't
    see how it is related and, otherwise, I cannot ascertain anything
    that is unique about this project's TOC.
    Weird.

    You say: "This project does have some javascript running on
    the content pages but I don't see how it is related ..."
    I don't believe I've ever run into this type of problem on
    the forum, so I'd tend to say that your particular environment is
    at the heart of your problem.
    If you remove this Javascript, does the problem go away?
    Are you working the project on a network (Note: shared drive
    = network)?
    Do some topics appear multiple times in the TOC? That always
    creates sync problems for RH.
    Good luck,
    Leon

  • Select statement for Active Kit Indicator

    Hi All ,
    I am using C_AKIn AS CHECKBOX as a check box for Active Kit indicator . If i won't chose then it will not check the condition but if the Active Kit indicator is selected, then Program shall check for the live Kits from the range of Material No. entered. The live Kit is the Material which is having Unrestricted Stock at Plant level (Table: MARD Field LABST) or Forecast at Plant level (Table PBIM Field BDZEI  Table PBED Field PLNMG) or both.
    Forecast shall be considered for four periods (Current + 3 Months) in future, means if the Material having the forecast in current month + 3 months is to be considered as Active Material (Table PBED Field PDATU)
    Validation :-
    1.MRP Type (Table MARC – Field DISMM) shall not be equal to ‘CS’ or ‘PE’
    2.Current corrected forecast or any of the 3 future corrected forecasts not equal to zero.

    Hi,
    Try using IN stmt.
    SELECT MBLNR
    MJAHR
    BUDAT
    XBLNR
    FROM MKPF INTO CORRESPONDING FIELDS OF TABLE ITMKPF
    WHERE BUDAT <b>IN</b> S_BUDAT.
    reward if helpful
    Regards
    Azad.

  • OEBH is stuck at activity Close Blanket - Eligible

    Hi Experts!
    I am facing issue when Terminating a Blanket sales agreement, the sales agreement is terminated from the front end but when I check the workflow for OEBH, the worklow is waiting at activity 'Close Blanket - Eligible' with the status of activity as NOTIFIED. Can anyone please guide me on how to handle this so that the workflow donot get stuck on this activity and proceeds further.
    Best regards
    Himanshu

    Hello,
    Look at Extend The Expiration Date For Closed Non-Active Expired BSA Blanket Sales Agreement [ID 1394888.1], maybe workflow want notified user which is not active.
    Regards,
    Luko

  • Table EKPO - PO Active/Closed Indicator field exist ?

    Hi,
    I am not an MM guy. But, i am writing a report based on MM.
    I would like to know, whether any indicator field exist in EKPO table, that will give the status of an PO for a given material ? If exist, what is the name of the field and what value does it contain that indicates, whether the PO is active/closed ?
    If not in EKPO table, then which table/field contains the above required info, which will also have matnr and werks fields within it ?
    Thanks,
    Gaurav.

    Hi,
    please check EKPO-STAPO which is a statistical indicator.
    If a purchase order item is deleted, the item is marked as 'statistical'       
    (field EKPO-STAPO = X) .                                                                    
    However, if for the item the final invoice indicator (EKPO-EREKZ) or the       
    inward delivery completed indicator (EKPO-ELIKZ) is set, the item is not       
    marked as 'statistical' (EKPO-STAPO is not set).
    Just in case it is needed, note 358293 contains report zkstapo to correct ekpo-stapo where the      
    field is set but no deletion indicator is set.
    Regards,
    Edit

  • Result recording configuration with automatic close indicator

    Hi Guys,
    I was testing this automatic result configuration in my system.
    I selected the u201C1u201D (i.e. Automatic Close) Recording Configuration indicator on the plant level in SPRO > QM > Basic Settings > Maintain Settings at Plant Level> plant > Result recording tab > Recording configuration > maintain Automatic Close.
    Next, I entered the three user parameter ID QAE, QAN, and QAS in the user parameter SU3. However, I leave the parameter value for these three ID blank as I donu2019t know what to put in.
    During result recording, I tested this MIC characteristic on both reject and accept scenarios (i.e. fall under lower/upper limit, and fall outside lower/upper limit). To my surprise, nothing happens. In another word, there is no automatic close incurs on the inspection characteristics (i.e. both the accepted and rejected checkbox still remain unchecked even I navigate around, and hit the u201Ccontinueu201D, u201Cbacku201D, or u201Csaveu201D button).
    Further, I have fulfilled the following prerequisite as specified in the SAP help portal on this topic:
    1 - The inspection scope is fixed scope of this MIC.
    2 - I entered the target sample size (i.e. both the value in the u201CInspectu201D and u201CInspectedu201D field is similar).
    3 - I think I should have the authorization because I have entered the three parameter IDs on the SU3.
    May I know what is wrong?
    Can it be the parameter values for the three parameter ID are blank in my SU3? If so, what value I should enter for these three param ID? If not whatu2019s going wrong?
    Thanks
    YY

    Hi Gajesh,
    For some reason, it doesnu2019t work.
    I think I will tell my guys to perform manually pressing the Lock icon button to force it to valuate and also become status 5, since this the two valuation checkboxes, i.e. accept and reject checkbox is either ticked correctly according to the sampling plan setup in the sampling schema.
    Further, I donu2019t see why this extra manual step is so difficult for my worker.
    Thanks for your help
    YY

  • PDS active /inactive  indicator

    Hi,
    Is there any indicator to know the PDS is active / inactive .
    Thanks,
    Sami

    When you display the PDS you can check the 'Valid From' to 'Valid To' dates to check whether it is active or inactive. There is also an 'Obselete Status' indicator in the last column, though I'm not sure how this works.
    As per, SAP documentation, only current status PDS are displayed and if you have any obselete PDS you can display them by pressing the 'log' icon. I could not find the 'log' icon & assume it appears only if you have obselete PDS.
    Hope this helps.
    Srinidhi

  • What happened to the file activity window indicator?

    In Dreamweaver CS5 and earlier versions when I would upload my files to my web server the file activity window would show the progress as the bits uploaded.  Now in CS6 the bits aren't showing... only the overall progress.  This is a drag when I'm uploading a large file and can't monitor the progress.  The progress bar doesn't really show you as a large file is uploading.  Is this a new change or can it be restored to how it use to be somehow?
    Thanks,
    BC

    I found the answer to this problem at this link:
    http://blogs.adobe.com/dreamweaver/2012/06/ftp-improvement-in-dreamweaver-cs6.html
    Seems the activity window has in fact changed in CS6.  To see the progress you hold your cursor over the file you are transferring.
    Not sold on DW CS6 so far to be honest...

  • PO Close Indicator at header Level

    Hi,
      Is there any way of determining that the PO is closed at the Header Level instead at Line Item Level.
    We are implementing 4.6C and in 4.6C there is no field which will determine that the PO is closed, in the sense that Goods Receipt is done for all Line Items.
    I am not sure if there is any indicator at PO header level in the higher versions other than 4.6c
    Please let me know if there is any indicator available in the higher versions.
    Thanks,
    Vani.

    Hi ,
    1. open PO ---> you have not recieved the /GR complete qty of PO.
    2. Open for GR -
    > complete invoicing for recieved material qty has not taken place.
    3. Open for Invoicing -
    > Account posting has not taken place for invoice which you have created.
    hoppe it helps....
    manoj singh

  • Identification of activity 'Close' in transaction CJ02

    Hi,
    I want to implement a check to be perfomed uisng BADi 'WORKBREAKDOWN_UPDATE (BUS2054)' when a WBS Element is being closed (Menu path: Transaction code -CJ02, Specify WBS Element no. & enter the screen, Now select a WBS Element & branch to menu path : Edit -Status- Close).
    I need a clue /method to identify this event/ command 'Close' in transaction CJ02.
    Looking forward to quick help.
    Thanks,
    Rajesh G. Kothari

    I'm not an ABAPer but below are some inputs:
    To check/identify if the status is set, goto table JEST, field STAT against the WBS OBJNR will be I0046 (Closed). Also field Status Inactive INACT which will be blank.
    Also check FM-STATUS_CHECK
    We have used below this sequence for changing the WBS status, thought it will be useful for you.
    BAPI_PS_INITIALIZATION
    BAPI_BUS2054_SET_STATUS  (Here we pass the status)
    BAPI_PS_PRECOMMIT
    BAPI_TRANSACTION_COMMIT
    Regards
    Sreenivas

  • Pr close indicator

    Hi ,
       actuall when we creat a PO with respect to closed  pr it allowing me to creat po for that pr, but could not giving me any error or warning message. where can i configure these error messages.

    Hi
    Try this and revert...go to SPRO-MM-Purchasing-Environement--Define attributes of system messages.
    There try to make message no. 290 as E message and tell us if still u r able to raise a PO against a closed PR.
    regards
    Yogesh

  • How to identify activity/ command 'CLOSE' in transaction code CJ02

    Hi,
    I need to implement a check in transaction code - CJ02 when
    command 'CLOSE' is performed to close a WBS Element. This check is being planned to be implemented using BADi - WORKBREAKDOWN_UPDATE using 'AT_SAVE' method.
    However I am unable to capture the command as 'sy-ucomm' is always 'BU' at the time of executing this method.
    Request you to render necessary assistance in this regard. Even I can use any other USEREXITS that is getting called only during closing of WBS Element.
    Steps for simulating/ understanding the problem are as below:
    1. Use Transaction code - CJ02
    2. Specify WBS Element no. - (as available in your system)
    3. Press enter on selction screen & select a WBS Element & branch to
    menu path : Edit -Status- Close
    4. Pres 'Save'
    At this stage in BADi - WORKBREAKDOWN_UPDATE (Business Add-In WBS Elements (BUS2054)) we need to identify this cooand 'CLOSE'.
    It is unclear what ABAP code to be written to capture this
    activity 'CLOSE'.
    Looking forward to hear from you experts.
    Best regards,
    Rajesh G. Kothari

    I'm not an ABAPer but below are some inputs:
    To check/identify if the status is set, goto table JEST, field STAT against the WBS OBJNR will be I0046 (Closed). Also field Status Inactive INACT which will be blank.
    Also check FM-STATUS_CHECK
    We have used below this sequence for changing the WBS status, thought it will be useful for you.
    BAPI_PS_INITIALIZATION
    BAPI_BUS2054_SET_STATUS  (Here we pass the status)
    BAPI_PS_PRECOMMIT
    BAPI_TRANSACTION_COMMIT
    Regards
    Sreenivas

  • Close PR automatically once Converted into PO

    Dear ALl,
    Please let me know asnsy setting will be available to get tick automatically once the PR is converted into PO with Full qty.
    Is thr any settings will be available in IMG, so that once the PR is converted fully to PO system should automatically tick the Close indicator.
    This will help in MRP run.
    Pls do the needful.
    Regards,
    Nagaraj S

    Hi Nagaraj S,
    The function of Closed Indicator in the PR is, No Further pruchase orders are to be created for this Purchase REquisition
    Suppose u created a pR but later on you dont want to create PO for this PR or you want to block Pr for further activity, in that case YOu will use Closed Indicator
    By system message you can control when PR is converted in to PO with full Qty. Again If you try to create the PO for same PR in that case system will generate Error message. it will not allow you to create PO.
    Settings are : SPRO > Materail Management > Purchasing > Environment > Define Attributes of System Messages >
    here  076Materials of requisition & item & alr. ordered in full Indicate as E*
    Try ..
    Reards,
    Vraj

  • MAKING UNLIMITED INDICATOR AS GREY MODE IN SERVICE TAB OF SERVICE P.O

    Dear cons
    In service purchase order we want to make unlimited delivery indicator in a grey mode in service tab. I tried in screen layout of purchase order. In purchase order there are two field of unlimited indicator. One is available in delivery tab of p.o in item details screen. Another is also available in service tab of p.o in item details screen. When I made setting in screen layout at document level I saw the unlimited indicator became grey in DELIVERY TAB of the P.O. But my requirement is to make the setting in a grey mode in service tab of the p.o. how can I do it.Because we have created a ser. p.o of  service of 10piece. but the user has activated unlimited indicator in service item . we want to make setting so that the system will not allow to activate the un limited indicator.pl. solve it.
    nrk

    Hi
    Try this in external service management:
    MM-> external service management -> define screen layout -> choose ME21-> copy it as ME21n (tcode) -> under quantity tab -> make Overfulfillment tolerance % & Overfulfillment tol. unlimited as hidden/ display.
    So if you ME21n tcode then these fields will be hidden/ display.
    Thanks

  • Accounting indicator in billing document

    Hi,
    I have activated accounting indicator as a characteristics in DIP profile and it appears in RRB debit memo request . However , it does not appear in billing document created from debit memo request , though it appears in VBRP table. How can the field accounting indicator (BEMOT) be made visible in billing document.
    With regards,
    Mrinal

    Hello,
    I done the following activities as per your guidence however system is not changing billing type in LIKP & VKDFS tables-
    -> New Billing types are assigned to sales document type in configuration
    -> Copy controls are maintained for new billing types
    -> Billing Index program RVV05IVB has executed with Billing Index flag
    Please advice
    Best Regards,
    Goutham

Maybe you are looking for