PO Error in process bcoz of deleted item

Hi,
I have a PO in error in process.
When i check in RZ20 i see that the G/L account has been blocked for the company code.
The PO has been created earlier with 2 items which have different G/L accounts. This has been successfully replicated to backend. Later the first item has been deleted which again has been to backend properly and after that the G/L has been blocked for posting for that company.
Now the user has changed the second item and the PO is in error in process and in RZ20 i see that the G/L account used for the first item has been blocked as a reason.
Ideally it shouldnt consider the deleted item but can you please advice why the PO got into error in process.
Regards
Zubair
Edited by: Zubair.md on Feb 5, 2010 12:59 PM

Hi,
You can check the reason that PO is not being transferred to ECC in debug mode.
In order to do it, you can perform the following action:
- Breakpoint at FM B46B_DPO_TRANSFER;
- SE37 BBP_PD_PO_TRANSFER_EXEC, enter PO header GUID and execute;
- Program will stop at FM where the BP was set;
- Look for statement CALL FUNCTION 'BBP_PO_INBOUND' DESTINATION lv_destination;
- F6 or F5 to debug into ERP (2nd session will start). Here you can check the table lt_bapi_return in order to check if the PO has been created or not in backend.
I hope it helps.
Kind regards,
Ricardo

Similar Messages

Error in Process chain while deleting index and create index

While executing the process chain for delete index the process chain failed with the below error message as "The system has not finished loading request 445315 into data target ZECC_C01". While creating index also it failed with error message as "Lock NOT set for: Generate index, RSSM_PROCESS_INDEX terminated, because InfoCube/DSO object ZECC_C01 could not be locked".
Please help me in solving this issue.
Thanks & Regards,
Bharathi

Hi,
Manage the data target - ZECC_C01 and check the request number 445315. Also check the subsequent data targets if further loading was erroneous. Check whether the request is green / Properly loaded or not.
You can also use RSBKREQUEST table to check the request and its corresponding data target.
This request is either red or yellow caused this failure.
Hope this helps.
Regards,

PO needs to deleted error in process

Shop with Limit (SWL) SC has been created previously with 2 or 3 line
before implementation of the OSS note1058510, the PO has gone
into 'Error in Process' there are almost 5-6 PO with this status.
We have implemented the OSS note 1058510 and now can create multiple
line with limit SC and PO.
Tried to kick-start the previously created PO again by deleting the
line items but Po again has gone error in process.
Needs to delete the PO which has gone ' Error in Process before
implementation the note.

Hi Teja,
Thanks for your reply, yaa i do agree that we can delete the Po item in browser or in GUI but in my case the Po has gone error in process when I delete the Po item and approved the PO it is again going in Error in process and not updating the Backend deletion flag.
Unfortunatly none of the FM provided by you is not sacifies my purpose the item is not deleted.
can you please elaborate whether it will cahnge the status of the Po or put the deletion flag on the items in the PO. also which one should i use because i have tested all of them and is not working
Regards
Rama
Will surely award points for useful answer.
Message was edited by:
rama kumar

SCSM 2012 UR3 - "The Full adapter threw an exception" error when viewing "Deleted Items" view

Has anyone expereinced the "The Full adapter threw an exception" eror in the SCSM 2012 console?
We get the error in both our dev and production environments when trying to view the "Deleted Items" view in the console (even after using powershell to remove all deleted iterms). As just noted, interestingly enough we can view, delete, and restore
deleted items using the corresponding Powershell commands. It should be noted that neither of our two SCSM 2012 environments has a registered data warehouse server. Below is a screen shot of the error as well as the associated error text and event
log errors.
Any help would be greatly apprecaited!
Regards,
JJ
Console Dialog Error Test
============================
Date: 10/17/2012 8:46:50 PM
Application: Service Manager Console
Application Version: 7.5.1561.0
Severity: Error
Message: An error occurred while loading the items.
Microsoft.EnterpriseManagement.UI.ViewFramework.AdvancedListSupportException: The Full adapter threw an exception. See the FullUpdate property to see the exception.
   at Microsoft.EnterpriseManagement.UI.ViewFramework.AdvancedListSupportAdapter.DoAction(DataQueryBase query, IList`1 dataSources, IDictionary`2 parameters, IList`1 inputs, String outputCollectionName)
   at Microsoft.EnterpriseManagement.UI.DataModel.QueryQueue.StartExecuteQuery(Object sender, ConsoleJobEventArgs e)
   at Microsoft.EnterpriseManagement.ServiceManager.UI.Console.ConsoleJobExceptionHandler.ExecuteJob(IComponent component, EventHandler`1 job, Object sender, ConsoleJobEventArgs args)
Associated Event Log Errors
============================
Log Name:      Application
Source:        MSSQLSERVER
Date:          10/17/2012 8:46:49 PM
Event ID:      8623
Task Category: Server
Level:         Error
Keywords:      Classic
User:          SYSTEM
Computer:      jhqsrv08.jhq.net
Description:
The query processor ran out of internal resources and could not produce a query plan. This is a rare event and only expected for extremely complex queries or queries that reference a very large number of tables or partitions. Please simplify the query. If you
believe you have received this message in error, contact Customer Support Services for more information.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="MSSQLSERVER" />
    <EventID Qualifiers="49152">8623</EventID>
    <Level>2</Level>
    <Task>2</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2012-10-18T00:46:49.000000000Z" />
    <EventRecordID>339617</EventRecordID>
    <Channel>Application</Channel>
    <Computer>jhqsrv08.jhq.net</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Binary>AF21000010000000090000004A00480051005300520056003000380000000F00000053006500720076006900630065004D0061006E0061006700650072000000</Binary>
</EventData>
</Event>
Log Name:      Operations Manager
Source:        DataAccessLayer
Date:          10/17/2012 8:46:49 PM
Event ID:      33333
Task Category: None
Level:         Warning
Keywords:      Classic
User:          N/A
Computer:      jhqsrv08.jhq.net
Description:
Data Access Layer rejected retry on SqlError:
Request: MTV_Select_62f0be9f-ecea-e73c-f00d-3dd78a7422fc_Top -- (NonGenericDistinctFilterForAbstract=4cf77750-6688-8672-9470-036e0f4b48d6,26b2dff7-2ce9-59cf-4eb8-a6fb2d095d45,89992420-1297-0b8b-f3ca-1e53aa36f9e0,ed5ec2bf-6745-086...), (ObjectStatus_4AE3E5FE_BC03_1336_0A45_80BF58DEE57B0=47101e64-237f-12c8-e3f5-ec5a665412fb)
Class: 16
Number: 8623
Message: The query processor ran out of internal resources and could not produce a query plan. This is a rare event and only expected for extremely complex queries or queries that reference a very large number of tables or partitions. Please simplify
the query. If you believe you have received this message in error, contact Customer Support Services for more information.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="DataAccessLayer" />
    <EventID Qualifiers="32768">33333</EventID>
    <Level>3</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2012-10-18T00:46:49.000000000Z" />
    <EventRecordID>935685</EventRecordID>
    <Channel>Operations Manager</Channel>
    <Computer>jhqsrv08.jhq.net</Computer>
    <Security />
</System>
<EventData>
    <Data>MTV_Select_62f0be9f-ecea-e73c-f00d-3dd78a7422fc_Top -- (NonGenericDistinctFilterForAbstract=4cf77750-6688-8672-9470-036e0f4b48d6,26b2dff7-2ce9-59cf-4eb8-a6fb2d095d45,89992420-1297-0b8b-f3ca-1e53aa36f9e0,ed5ec2bf-6745-086...),
(ObjectStatus_4AE3E5FE_BC03_1336_0A45_80BF58DEE57B0=47101e64-237f-12c8-e3f5-ec5a665412fb)</Data>
    <Data>16</Data>
    <Data>8623</Data>
    <Data>The query processor ran out of internal resources and could not produce a query plan. This is a rare event and only expected for extremely complex queries or queries that reference a very large number of tables or partitions.
Please simplify the query. If you believe you have received this message in error, contact Customer Support Services for more information.</Data>
</EventData>
</Event>
Log Name:      Operations Manager
Source:        OpsMgr SDK Service
Date:          10/17/2012 8:29:26 PM
Event ID:      26319
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      jhqsrv08.jhq.net
Description:
An exception was thrown while processing GetManagedEntitiesByManagedEntityTypesAndCriteriaWithInstanceQueryOptions for session ID uuid:66ba50da-cdce-4d15-823c-92c41b46fe44;id=2425.
Exception message: The creator of this fault did not specify a Reason.
Full Exception: System.ServiceModel.FaultException`1[Microsoft.EnterpriseManagement.Common.UnknownDatabaseException]: The creator of this fault did not specify a Reason. (Fault Detail is equal to The query processor ran out of internal resources and could
not produce a query plan. This is a rare event and only expected for extremely complex queries or queries that reference a very large number of tables or partitions. Please simplify the query. If you believe you have received this message in error, contact
Customer Support Services for more information.).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="OpsMgr SDK Service" />
    <EventID Qualifiers="49152">26319</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2012-10-18T00:29:26.000000000Z" />
    <EventRecordID>935679</EventRecordID>
    <Channel>Operations Manager</Channel>
    <Computer>jhqsrv08.jhq.net</Computer>
    <Security />
</System>
<EventData>
    <Data>GetManagedEntitiesByManagedEntityTypesAndCriteriaWithInstanceQueryOptions</Data>
    <Data>uuid:66ba50da-cdce-4d15-823c-92c41b46fe44;id=2425</Data>
    <Data>The creator of this fault did not specify a Reason.</Data>
    <Data>System.ServiceModel.FaultException`1[Microsoft.EnterpriseManagement.Common.UnknownDatabaseException]: The creator of this fault did not specify a Reason. (Fault Detail is equal to The query processor ran out of internal resources
and could not produce a query plan. This is a rare event and only expected for extremely complex queries or queries that reference a very large number of tables or partitions. Please simplify the query. If you believe you have received this message in error,
contact Customer Support Services for more information.).</Data>
</EventData>
</Event>

I have the same problem and get following error:
An exception was thrown while processing GetManagedEntitiesByManagedEntityTypesAndCriteriaWithInstanceQueryOptions
I have contacted MS Support, but hey could not help
either.
I really
need to fix it. Any help?

P.O Error in Process after copying the existing item in change mode

Hi All,
We are in SRM 5.0 Server 550 and SP15 and are using Extended Classic Scenario.
We are facing a peculiar issue, when an already created P.O (Free text - goods) is changed and a new line item is added either manually or by copying the existing line item and then ordering it, the P.O is going into Error in Process status.
This is happening only when i am adding a new item (material) to the existing line item (material) but when i am adding a service line item in the change mode to the existing material line item, the P.O is getting ordered without any issue.
I believe this is SAP bug and raised with SAP for OSS.
Meanwhile i would be grateful if you can provide any resolution to this issue and provide any OSS note number (If one already exists).
Regards,
Teja

Hi Teja
it works fine for me.
old po template..
taken describe procureemnt - goods
copy the line item
changed qty and price
POs created for both items in one PO since vendors are same?
what the error message says in the application monitor or rz20 / monitor sc.?
for me i had a contract in my pld pos.(sc).
muthu

Error while processing dimension after add or delete property

Hi Experts,
I use BPC for MS SP6 with SQL Server 2008. I detected a problem while processing dimension after add or delete property.
The error message is: u201CMemory error: Allocation failure : Not enough storage is available to process this command. Error Code = 0x8007000E, External Code = 0x00000000.u201D
I tried to truncate and drop dimension tables and process dimension again, and it doesnu2019t work.
Any idea?
Thanks a lot for your support!
Albert

Hi Sorin,
Yestarday in the afternoon, we added a Property at another Dimension, and we continued having the same problem: we had errors when processing that dimension, but after restarting the server, we can process dimension.
Looking at the Event Viewer, at 'OutlookSoft log' environment, the following error appears:
<<
3/28/2011 6:57:15 PM
ModuleName : Olap9Manager - DeleteDimension
Message : Error Code = 0x8007000E, External Code = 0x00000000:.
Error Code = 0x8007000E, External Code = 0x00000000:.
Error Code = 0x8007000E, External Code = 0x00000000:.
Stack :    at Microsoft.AnalysisServices.AnalysisServicesClient.SendExecuteAndReadResponse(ImpactDetailCollection impacts, Boolean expectEmptyResults, Boolean throwIfError)
   at Microsoft.AnalysisServices.AnalysisServicesClient.Alter(IMajorObject obj, ObjectExpansion expansion, ImpactDetailCollection impact, Boolean allowCreate)
   at Microsoft.AnalysisServices.Server.Update(IMajorObject obj, UpdateOptions options, UpdateMode mode, XmlaWarningCollection warnings, ImpactDetailCollection impactResult)
   at Microsoft.AnalysisServices.Server.SendUpdate(IMajorObject obj, UpdateOptions options, UpdateMode mode, XmlaWarningCollection warnings, ImpactDetailCollection impactResult)
   at Microsoft.AnalysisServices.MajorObject.Update(UpdateOptions options, UpdateMode mode, XmlaWarningCollection warnings)
   at Microsoft.AnalysisServices.MajorObject.Update(UpdateOptions options)
   at Osoft.Services.Platform.YukonAdmin.Olap9Manager.DeleteDimension(String strAppset, String strDimension, String strCube, String dimTablePrefx, Boolean bDeleteFromDB, String& strMsg, Boolean bOnlySharedDim)
>>
Any idea in order to identify the root cause?
Thanks in advance,
Albert

Can not delete file. Error is "Could not find this item".

I get the following error when trying to delete a file: "Item not found". This is a Word 2007 document that would not save properly so I saved it with a different name. Now I can't delete the original file.
The body of the error states "Could not find this item. This is no longer located in... . Verify the item's location and try again.

Hi,
I'm having exact the same problem with a file with a long name, to delete, move, rename, attribute change, etc. I deleted the file, which I receive the confirmation. However, the file is still there, with zero bytes and no extension. When I try
to delet, move or change the file, I get the error "Could not find this item, This is no longer located in xxx. Verify the item's location and try again."
I tryed everything: Using DOS, there's no 8.3 name format; In safe mode; chkdsk and sfc. Nothing worked.
I also tryed the tricks in http://www.sevenforums.com/general-discussion/27924-could-not-find-item-when-deleting-files-3.html
http://forums.techarena.in/vista-help/1038943.htm
Without success.
I took some more time and found this tool on the net "DelinvFile". It works perfectly, after trying EVERYTHING!!!.
I Have Windows 7 professional 64bits and NTFS.
Thank you very much.
Thankyou Thankyou Thankyou Thankyou......... We are almost bald tearing our hair out over this issue and how to fix it. Delin File WORKS...... At the cost of about 28 bucks well worth it.............. Good onya mate............

SBWP - When delete items in Inbox the error is coming - Lock Entries (SM12)

Hi Friends,
Whenever delete workflow items from Inbox (txn : SBWP), I am getting the below error.
Requested object is currently blocked by user <XXXXX>
Diagnosis :
No lock can be granted by calling a function module, as enqueue another SAP transaction keeps blocking concerned.
Technical: C_ENQUEUE routine provides the following return codes:
COLLISION_OBJECT = EMMARAE
COLLISION_UNAME = CEMCONC
System activity
The enqueue function module triggers the exception. If this exception was not intercepted by the application program, the SAP transaction is automatically interrupted.
Procedure
Check the table blocking the user or transaction that maintains the requested block (Tools -> Administration ==> Monitors -> Entries blocking). Contact this user if necessary.
After this error, the item is deleted from the inbox. Then, when I go and check in SM12, there are 3 entries are created : 2 entries with Lock Mode as 'S' and one entry with Lock Mode 'E' in MARA table.
After refresh in RS12/SM12 tcodes, these 3 entries has gone.
Friends, can you kindly clarify why the above error message is coming while delete ? How to avoid this ?
Kind regards,
Jegathees P.

An Z indexes created for the table CDHDR (Followed the note 150925)

Purchase order - error in deleted items

Hi all,
I have the following situation: when changing an existent purchase order, if I have a deleted item with an error, the system doesn't allow me to save the purchase order if I don't correct the error in the deleted item.
I have a requirement for the client to suppress this behaviour.
Any ideas on this?
Thanks in advance.
Best regards,
Sónia Gonçalves

Hi,
First of all, thank you all for your answers.
I got this from SAP:
"As per system design, the PO item must be free of errors before you can save it (even if it is deleted). This is to ensure that no error appears suddenly if the PO item is later undeleted. SAP generally
allows saving only if the entered data is consistent, so that it does not cause unexpected errors later"
I have a requirement to suppress this behaviour, since the client doesn't understand why they have to correct a deleted item.
Any ideas on a user-exit ou badi where I could ignore this validation and how?
Thanks.
Best regards,
Sónia Gonçalves

Error in processing notification , item 0000 in BAPI_ALM_NOTIF_DATA_MO

I got error message when I ran the BAPI BAPI_ALM_NOTIF_DATA_MODIFY
here is the data
Number: 000300121207
Notifitem
REFOBJECTKEY                   QM000300121207
ITEM_KEY                       0001
ITEM_SORT_NO                   0001
DESCRIPT                       TEST
Notifitem_X
ITEM_KEY                       0001
ITEM_SORT_NO                   X
DESCRIPT                       X
I got the return table
TYPE                           E
ID                             IM
NUMBER                         280
MESSAGE                        Error in processing notification , item 000
Do I need to pass anything in this BAPI? Thanks!

This May Help
http://abap.wikiprog.com/wiki/BAPI_ALM_NOTIF_DATA_MODIFY or try searching this BAPI in the SDN forum and you will get a lot of threads.

Error: "The workflow could not delete the list item"

Have set up 2 lists: Events and EventsArchive. They have all the same fields. I have created a workflow in SPD using an impersonation step (I have Full control of the site/site collection). Workflow is essentially this:
    If Curent Item:Expired
equals
Yes
       Copy item in Current Item to
EventsArchive
       then Delete item in
Current Item.
The item is copying over to the EventsArchive list just fine, but the "delete" part is not happening. Instead, I get the following error:
The workflow could not delete the list item. Make sure the list exists and the user has permissions to delete items in the list.
The list obviously exists (or I wouldn't be able to copy an item from it), and I have as much permissions as anyone can have, so I'm not sure where else to turn with this.
Thanks in advance for your help!

Hi,
To test the issue, I create a simple workflow without using Impersonation step:
It works.
Could you please create new lists to avoid custom settings and test the issue again?
Similar thread:
https://social.msdn.microsoft.com/Forums/office/en-US/3fa94026-4487-4e4c-a5b4-12a79d6ee6a2/workflow-delete-item-not-working?forum=sharepointcustomizationprevious
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Deleted items from Ipod Nano to make room for new. Emptied trash. Still getting error message when I try to copy items from ITunes to Ipod. What should I do now?

Deleted items from Ipod Nano to make room for new. Emptied trash. Still getting error message when I try to copy items from ITunes to Ipod. What should I do now?

If you delete songs (and other items) from the main iTunes library, yes, you need to empty the Trash because iTunes puts the song files into the Trash. When deleting items from an iPod, the items are not being deleted from the main iTunes library, so nothing should end up in the Trash.
Hopefully, you are not deleting items from your main iTunes library, just to sync those deletions from the iPod. If you are, there is a better way. You can post back if you want more info...

InfoPath form, rich text fields, "There was a form postback error" InvalidOperationException, There has been an error while processing the form

Using InfoPath 2013 browser enabled form.
I am getting the above error on ALL Infopath Designed Rich Text fields, where the "Cannot be blank" attribute is set.
To reproduce it, I create a custom list and custom list form with InfoPath 2013. I add 2 Rich Text fields and enable "cannot be blank". To raise the error, I put some data in the RT field. Skip to another field (so focus is changed and a postback
occurs), then back to original field to delete the contents (to raise the validation).
I originally thought it was associated with the HTMLCHKR.DLL not being registered (and I have re-registered it just in case), but the exception I get from the ULS logs reads (it is from a list AFTER I have re-registered the DLL):
There was a form postback error. (User: 0#.w|myDomain\jc, Form Name: Template, IP: , Request: h t t p ://MyWebApp/MySite/Lists/rtAfterHtmlCHkrReg/Item/newifs.aspx?List=2212ff41-77b4-445b-931b-d7e538c9da91&Source=h t t p://MyWebApp/MySite/Lists/rtAfterHtmlCHkrReg/AllItems.aspx&RootFolder=&Web=3db49106-bdca-47bb-b4cd-a549d2d86aa7,
Form ID: urn:schemas-microsoft-com:office:infopath:list:-AutoGen-2015-01-16T21:51:48:853Z, Type: InvalidOperationException, Exception Message: No content generated as the result of the operation.) 8cc5e09c-3665-903b-575a-faaac506c40a
I noticed that errors associated with the HTMLCHKR.DLL not being registered would have some sort of COM exception (example: TYPE_E_LIBNOTREGISTERED or REGDB_E_CLASSNOTREG)
I also should mention that this problem started happening about 3 weeks ago. We have extended the web application to handle HTTPS on the intranet zone (we had a reverse proxy project that did not eventuate) - would that cause something? How can I do further
checking?

Hi,
I have done a test in my SharePoint, and I met the same issue with you.
I created a custom list and custom list form with InfoPath 2013. I added 2 Rich Text fields and enabled "cannot be blank". I put some content in the RT field, then delete the contents, I got the error message:"there has been an
error while processing the form."
Here is a similar post said that executing the command: regsvr32 "C:\Program Files\Common Files\Microsoft Shared\
OFFICE14\htmlchkr.dll" will solve the issue.
https://social.msdn.microsoft.com/Forums/en-US/eb2e0f6e-c8e4-4e92-ac5e-a09d72759eda/rich-text-field-error-in-webform?forum=sharepointcustomizationprevious
But I just disabled "cannot be blank", and it solved the issue.
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

Multiple a/c assgt SRM PO - Error in process

Hi all,
SRM 5.0 SP 12 ecs
When I create a purchase order with mutliple a/cassignment in SRM and order it,it gets replicated to ECC with the indicators "Confirmation-Related Invoice Verification" and "Confirm Performance of Service/Goods Receipt " checked as per the vendor master.
However if I change these indicators in this PO,the PO is set to "Error in Process" and then on ECC side,I see the error "Goods receipt posted unvaluated due to multiple account assignment".
How do i process this PO further in SRM ???
Thanks.

Hi ,
I have checked it intially and both are identical.
Initialy the problem was, user had entered 128 times AA line items ( added & deleted ) in the PO while in the SC it was having only 64.... Our system accepts line items till 99 , so i asked him to delete the items above 99 ..
So after that POs error has gone and it went for approval..
But after approval it again went into error in process
Sheetal

No Further Confirmation Expected- PO error in process

Hi All,
SRM 5.0 ,ECS
We are trying to close a PO. When we check' No Further Confirmation expected 'on SRM PO and after approval, PO errors out saying Error in process. I looked up RZ20, Its saying Please specify valid account assignment. Any inputs ??
Krishna

Thanks Ganesh for your response
I have correct information for Account assignment category. We actually implemented a Note regarding this error, and we dont get this error now. But this PO is from the last year and we want to close out PO's so that it would'nt show up in Open PO's for reporting. Does it help in deleting the line item in SRM PO while it closes out PO for any further confirmations on the backend
Let me know
Krishna

PO Error in process bcoz of deleted item

Similar Messages

Maybe you are looking for