PO error in SUS-MM Scenario

We are implementing SUS-MM scenario. A purchase order is created in R/3 and sent over to SUS. When it comes to SUS it errors out with the following error. The Business partner it is looking for is company code. Which is there in the system.
any ideas how to resolve this?
An error occured within an XI interface: Exception occurredA:BBP_PD:004 -Partner 000000xxxx not found E:BBP_PD:147 -Enter a country for partner 000000xxxx with type 'Sold-to Party' W:BBP_PD:649 -Delvery date is in the past; check the entry Programm: CX_BBP_BD_ERROR===============CP; Include: CX_BBP_BD_ERROR===============CM002; Line: 57
Message was edited by:
jai bh

Hi
<u>Which SUS version are you using ?</u>
<b>Please refer to the SAP OSS Note below -></b>
Note 982822 - PO Inbound in SUS with error BBP_PD 147
<u>Prerequisites to SAP OSS Note - 982822</u>
Note 733294 SUS local service agent in PO Response does not work
Note 739359 SRM 4.0 dump when processing contact person from XML
Note 751143 SUS: PO with service agent cannot be sent to SUS
Note 761879 SUS-MM: PO with teleph. number/e-mail does not arrive in SUS 
Note 784386 SRM-SUS: Error E:BBP_PD:537. Order is not created.
Note 786566 SUS-MM: Address cannot be printed in the SUS 
<b>Other related SAP OSS Notes -></b>
Note 987569 SRM 5.0: ASN and SUSPO mapping corrections
Note 804317 - SRM40/SUS/PO: PO inbound with error BBP_PD 147
Do let me know.
Regards
- Atul

Similar Messages

  • Error while invoking a scenario from another scenario through ODIStartScen

    hi,
    my requirement is to call a scenario from another scenario. the main scenario contains an interface to get data from jms que and put that in DB and then invoke the inner scenario through ODIStartScen and am executing the scenario through an agent which is on another machine. when am trying to execute the main scenario then i get following error while invoking inner scenario in ODIStartScen step ....
    ERROR:::::
    oracle.odi.runtime.agent.invocation.InvocationException: HTTP/1.1 500 Internal Server Error
         at oracle.odi.runtime.agent.invocation.RemoteRuntimeAgentInvoker.invoke(RemoteRuntimeAgentInvoker.java:271)
         at oracle.odi.runtime.agent.invocation.support.InternalRemoteRuntimeAgentInvoker.invokeStartScenario(InternalRemoteRuntimeAgentInvoker.java:149)
         at com.sunopsis.dwg.tools.StartScen.actionExecute(StartScen.java:266)
         at com.sunopsis.dwg.function.SnpsFunctionBaseRepositoryConnected.execute(SnpsFunctionBaseRepositoryConnected.java:155)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execIntegratedFunction(SnpSessTaskSql.java:3185)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execIntegratedFunction(SnpSessTaskSql.java:1414)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java:2785)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2515)
         at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:534)
         at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:449)
         at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1954)
         at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1818)
         at oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$2.doAction(StartScenRequestProcessor.java:559)
         at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:224)
         at oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor.doProcessStartScenTask(StartScenRequestProcessor.java:481)
         at oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$StartScenTask.doExecute(StartScenRequestProcessor.java:1040)
         at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:114)
         at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
         at java.lang.Thread.run(Thread.java:662)
    the error that is in ODI server log is:
    Root cause of ServletException.
    org.springframework.jdbc.CannotGetJdbcConnectionException: Create DwgConnectConnection to master repository failed; nested exception is java.sql.SQLException: Pool connect failed : java.lang.SecurityException: [Security:090398]Invalid Subject: principals=[weblogic, Administrators, IntegrationAdministrators, AdminChannelUsers]
         at oracle.odi.core.persistence.dwgobject.DwgRepositoryConnectConnectionUtils.doGetMasterDwgConnectConnection(DwgRepositoryConnectConnectionUtils.java:93)
         at oracle.odi.core.persistence.dwgobject.DwgRepositoryConnectConnectionUtils.doGetMasterDwgConnectConnection(DwgRepositoryConnectConnectionUtils.java:49)
         at oracle.odi.core.persistence.dwgobject.DwgRepositoryConnectConnectionUtils.doGetMasterDwgConnectConnection(DwgRepositoryConnectConnectionUtils.java:58)
         at oracle.odi.core.security.SecurityManager.doODIInternalAuthentication(SecurityManager.java:348)
         at oracle.odi.core.security.SecurityManager.createAuthentication(SecurityManager.java:331)
         at oracle.odi.runtime.agent.servlet.AgentServlet.processRequest(AgentServlet.java:494)
         at oracle.odi.runtime.agent.servlet.AgentServlet.doPost(AgentServlet.java:454)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused By: java.sql.SQLException: Pool connect failed : java.lang.SecurityException: [Security:090398]Invalid Subject: principals=[weblogic, Administrators, IntegrationAdministrators, AdminChannelUsers]
         at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter.doGetConnection(LoginTimeoutDatasourceAdapter.java:133)
         at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter.getConnection(LoginTimeoutDatasourceAdapter.java:62)
         at org.springframework.jdbc.datasource.DataSourceUtils.doGetConnection(DataSourceUtils.java:113)
         at com.sunopsis.sql.SnpsConnection.createConnection(SnpsConnection.java:380)
         at com.sunopsis.sql.SnpsConnection.connect(SnpsConnection.java:338)
         at oracle.odi.core.persistence.dwgobject.DwgRepositoryConnectConnectionUtils.doGetMasterDwgConnectConnection(DwgRepositoryConnectConnectionUtils.java:88)
         at oracle.odi.core.persistence.dwgobject.DwgRepositoryConnectConnectionUtils.doGetMasterDwgConnectConnection(DwgRepositoryConnectConnectionUtils.java:49)
         at oracle.odi.core.persistence.dwgobject.DwgRepositoryConnectConnectionUtils.doGetMasterDwgConnectConnection(DwgRepositoryConnectConnectionUtils.java:58)
         at oracle.odi.core.security.SecurityManager.doODIInternalAuthentication(SecurityManager.java:348)
         at oracle.odi.core.security.SecurityManager.createAuthentication(SecurityManager.java:331)
         at oracle.odi.runtime.agent.servlet.AgentServlet.processRequest(AgentServlet.java:494)
         at oracle.odi.runtime.agent.servlet.AgentServlet.doPost(AgentServlet.java:454)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused By: java.sql.SQLException: Pool connect failed : java.lang.SecurityException: [Security:090398]Invalid Subject: principals=[weblogic, Administrators, IntegrationAdministrators, AdminChannelUsers]
         at weblogic.jdbc.common.internal.JDBCUtil.wrapAndThrowResourceException(JDBCUtil.java:258)
         at weblogic.jdbc.pool.Driver.connect(Driver.java:160)
         at weblogic.jdbc.jts.Driver.getNonTxConnection(Driver.java:652)
         at weblogic.jdbc.jts.Driver.connect(Driver.java:127)
         at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:355)
         at org.springframework.jdbc.datasource.UserCredentialsDataSourceAdapter.doGetConnection(UserCredentialsDataSourceAdapter.java:162)
         at org.springframework.jdbc.datasource.UserCredentialsDataSourceAdapter.getConnection(UserCredentialsDataSourceAdapter.java:133)
         at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter$ConnectionProcessor.run(LoginTimeoutDatasourceAdapter.java:217)
         at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
         at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
         at java.util.concurrent.FutureTask.run(FutureTask.java:138)
         at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
         at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
         at java.lang.Thread.run(Thread.java:662)
    Caused By: java.lang.SecurityException: [Security:090398]Invalid Subject: principals=[weblogic, Administrators, IntegrationAdministrators, AdminChannelUsers]
         at weblogic.security.service.SecurityServiceManager.seal(SecurityServiceManager.java:835)
         at weblogic.security.service.IdentityUtility.authenticatedSubjectToIdentity(IdentityUtility.java:30)
         at weblogic.security.service.RoleManager.getRoles(RoleManager.java:183)
         at weblogic.security.service.AuthorizationManager.isAccessAllowed(AuthorizationManager.java:375)
         at weblogic.jdbc.common.internal.JDBCUtil.checkPermission(JDBCUtil.java:231)
         at weblogic.jdbc.common.internal.ConnectionPool.reserve(ConnectionPool.java:357)
         at weblogic.jdbc.common.internal.ConnectionPool.reserve(ConnectionPool.java:317)
         at weblogic.jdbc.common.internal.ConnectionPoolManager.reserve(ConnectionPoolManager.java:93)
         at weblogic.jdbc.common.internal.ConnectionPoolManager.reserve(ConnectionPoolManager.java:106)
         at weblogic.jdbc.pool.Driver.connect(Driver.java:149)
         at weblogic.jdbc.jts.Driver.getNonTxConnection(Driver.java:652)
         at weblogic.jdbc.jts.Driver.connect(Driver.java:127)
         at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:355)
         at org.springframework.jdbc.datasource.UserCredentialsDataSourceAdapter.doGetConnection(UserCredentialsDataSourceAdapter.java:162)
         at org.springframework.jdbc.datasource.UserCredentialsDataSourceAdapter.getConnection(UserCredentialsDataSourceAdapter.java:133)
         at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter$ConnectionProcessor.run(LoginTimeoutDatasourceAdapter.java:217)
         at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
         at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
         at java.util.concurrent.FutureTask.run(FutureTask.java:138)
         at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
         at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
         at java.lang.Thread.run(Thread.java:662)
    kindly help me out.
    thanks in advance.

    In the batch File write this way
    cd E:\OraHome_ODI\oracledi\bin
    E:
    startscen EXT_DATA 002 GLOBAL In case you are providing the values (EXT_DATA 002 GLOBAL) as parameter
    then call the startscen this way
    cd E:\OraHome_ODI\oracledi\bin
    E:
    startscen %1 %2 %3

  • ODI 20088:Error While Generating The Scenario

    Hi,
    Today I have change the name my logical file schema(name is change to lower to upper case).Then select the new schema from File Model (only it is using the File Schema).Then Try to generate the scenario again but getting an error like this:
    ODI 20088:Error While Generating The Scenario
    java.lang.NullPointerException
         at com.sunopsis.dwg.codeinterpretor.SnpGeneratorSQLCIT.treatPopSourceSet(SnpGeneratorSQLCIT.java:7990)
         at com.sunopsis.dwg.codeinterpretor.SnpGeneratorSQLCIT.treatJobPopCollectionBuild(SnpGeneratorSQLCIT.java:7726)
         at com.sunopsis.dwg.codeinterpretor.SnpGeneratorSQLCIT.preComputePop(SnpGeneratorSQLCIT.java:7668)
         at com.sunopsis.dwg.codeinterpretor.SnpGeneratorSQLCIT.treatJobPop(SnpGeneratorSQLCIT.java:7568)
         at com.sunopsis.dwg.codeinterpretor.SnpGeneratorSQLCIT.treatPackageStep(SnpGeneratorSQLCIT.java:10477)
         at com.sunopsis.dwg.codeinterpretor.SnpGeneratorSQLCIT.mainGenPackageScenario(SnpGeneratorSQLCIT.java:2883)
         at com.sunopsis.dwg.codeinterpretor.SnpGeneratorSQLCIT.mainGenPackageScenario(SnpGeneratorSQLCIT.java:2817)
         at com.sunopsis.dwg.codeinterpretor.SnpGeneratorSQLCIT.mainGenScenSourceScenario(SnpGeneratorSQLCIT.java:11481)
         at com.sunopsis.dwg.codeinterpretor.SnpGeneratorSQLCIT.mainGenScenSourceScenario(SnpGeneratorSQLCIT.java:11505)
         at com.sunopsis.graphical.dialog.SnpsDialogScen.generateScen(SnpsDialogScen.java:190)
         at com.sunopsis.graphical.scenario.DwgScenGeneratingWizard.generate(DwgScenGeneratingWizard.java:68)
         at oracle.odi.ui.action.SnpsPopupActionGenerateScenHandler.actionPerformed(SnpsPopupActionGenerateScenHandler.java:103)
         at oracle.odi.ui.SnpsActionControler.handleEvent(SnpsActionControler.java:86)
         at oracle.ide.controller.IdeAction.performAction(IdeAction.java:529)
         at oracle.ide.controller.IdeAction.actionPerformedImpl(IdeAction.java:897)
         at oracle.ide.controller.IdeAction.actionPerformed(IdeAction.java:501)
         at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
         at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
         at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
         at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
         at javax.swing.AbstractButton.doClick(AbstractButton.java:357)
         at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:809)
         at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:850)
         at java.awt.Component.processMouseEvent(Component.java:6297)
         at javax.swing.JComponent.processMouseEvent(JComponent.java:3275)
         at java.awt.Component.processEvent(Component.java:6062)
         at java.awt.Container.processEvent(Container.java:2039)
         at java.awt.Component.dispatchEventImpl(Component.java:4660)
         at java.awt.Container.dispatchEventImpl(Container.java:2097)
         at java.awt.Component.dispatchEvent(Component.java:4488)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4575)
         at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4236)
         at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4166)
         at java.awt.Container.dispatchEventImpl(Container.java:2083)
         at java.awt.Window.dispatchEventImpl(Window.java:2489)
         at java.awt.Component.dispatchEvent(Component.java:4488)
         at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:668)
         at java.awt.EventQueue.access$400(EventQueue.java:81)
         at java.awt.EventQueue$2.run(EventQueue.java:627)
         at java.awt.EventQueue$2.run(EventQueue.java:625)
         at java.security.AccessController.doPrivileged(Native Method)
         at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
         at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:98)
         at java.awt.EventQueue$3.run(EventQueue.java:641)
         at java.awt.EventQueue$3.run(EventQueue.java:639)
         at java.security.AccessController.doPrivileged(Native Method)
         at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:638)
         at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
         at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
    Please Help
    Thanks
    Anindya

    If you have not deleted the old file schema, then it should have been work but it seems to be theissues with the link between interface and model .
    I cannot say this is the actual reason but it might be. Since you have draged the file datastore to interface, interface is probably pointing to old schema and file model is pointing new schema.
    I guess you have to recreate the interface again. Let me know how it is going with you
    Bhabani
    http://dwteam.in

  • Error in file-file scenario: HTTP response contains status code 503

    Hi folks,
    I've encountered the foll error in file-file scenario:
    Testing file-file scenario (followed the blog: https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/flatFILETOFLATFILE&)
    Initially i was hving problems with recvr comm channel, which are now resolved. File is sent successfully but not recvd. I tried to modify the scenario above and change the file type to 'Text' but still got the same error.
    I've checked SICF -->default_host/xi/engine , we dont maintain logon data there. when i test the default_host/xi/engine service, it resolves into an ip addr as follows:
    http://<hostname>.<domain.com>:8001/sap/xi/engine?sap-client=<clientNo>
    (Also, we hv a BW system running on the same server ,which uses a fully qualified domain, while we dont which is why we get the above domain. Im not sure if there are any issues with that.)
    and we get the foll error:
    Error Code 10060: Connection timeout
    If i remove the domain manually, im prompted for userid/pwd and get the foll result:
    - <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
      <SOAP:Header />
    - <SOAP:Body>
    - <SOAP:Fault xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
      <faultcode>SOAP:Client</faultcode>
      <faultstring>Pipeline specified in URL attribute (type) not existing</faultstring>
      <faultactor>http://sap.com/xi/XI/Message/30</faultactor>
    - <detail>
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIProtocol</SAP:Category>
      <SAP:Code area="MESSAGE">URL_PIPELINE_NOT_FOUND</SAP:Code>
      <SAP:P1>/sap/xi/engine?sap-client=<clientNo></SAP:P1>
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Pipeline ID , which is expected as value of attribute &quot;type&quot; in the URL, does not exist in the Integration Engine (URL = /sap/xi/engine?sap-client=811)</SAP:Stack>
      </SAP:Error>
      </detail>
      </SOAP:Fault>
      </SOAP:Body>
      </SOAP:Envelope>
    also, we dont hv any overload issues as this is dev env and not many of us are using the xi server. Would really appreciate if any of you can share your inputs on how to resolve this. Thanks!!
    cheers
    Prachi

    Hi ,
    Look in to this for all errors
    /people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
    The server is currently unable to handle the request due to a temporary overloading or maintenance of the server. The implication is that this is a temporary condition which will be alleviated after some delay. If known, the length of the delay MAY be indicated in a Retry-After header. If no Retry-After is given, the client SHOULD handle the response as it would for a 500 response.
    Note: The existence of the 503 status code does not imply that a server must use it when becoming overloaded. Some servers may wish to simply refuse the connection.
    Possible Tips: Because of J2EE application com.sap.aii.af.ms.app not active
    • Try to (re)start the application using the Visual Administrator Choose Server --> Services --> Deploy --> View on Application or restart the J2EE engine
    • The problem is that not all J2EE services can be started by the J2EE. i.e Start the Visual Administrator and select Server->Services->Deploy in the tree on the left. On the right-hand side, choose the Runtime tab page. You see a tree in the right window with all applications if you select the APPLICATION radio button. Check if they are running, otherwise choose Start. Usually the J2EE engine starts all services automatically.
    • Refer SAP Note 803145,807000,791655
    <b>Award Points if found usefull.</b>

  • ATTRIBUTE_IDOC_RUNTIME error in File-IDOC Scenario

    Hi,
    I got this error in FIle-IDOC scenario.
    ATTRIBUTE_IDOC_RUNTIME</SAP:Code>
      <SAP:P1>Transaction IDX1: Port SAPMMX, client , RFC destination contain errors
    There are many threads on same issue. Almost in all threads, the suggestion given was, we need to check the Channel Definition(Port should be SAP<SYSID> and not SAP<SYSID>_<CLIENT>)
    I have given the proper values for RFC desitnation and port. Even then, I m getting this error.
    Is there any other suggestions?

    Hi aarthi,
    I suggest u chk all d settings dat u hav done..
    Steps for ALE settings:-
    Steps for XI
    Step 1)
         Goto SM59.
         Create new RFC destination of type 3(Abap connection).
         Give a suitable name and description.
         Give the Ip address of the R3 system.
         Give the system number.
         Give the gateway host name and gateway service (3300 + system number).
         Go to the logon security tab.
         Give the lang, client, username and password.
         Test connection and remote logon.
    Step 2)
         Goto IDX1.
         Create a new port.
         Give the port name.
         Give the client number for the R3 system.
         Select the created Rfc Destination.
    Step 3)
         Goto IDX2
         Create a new Meta data.
         Give the Idoc type.
         Select the created port.
    Steps for R3.
    Step 1)
         Goto SM59.
         Create new RFC destination of type 3(Abap connection).
         Give a suitable name and description.
         Give the Ip address of the XI system.
         Give the system number.
         Give the gateway host name and gateway service (3300 + system number).
         Go to the logon security tab.
         Give the lang, client, username and password.
         Test connection and remote logon.
    Step 2)
         Goto WE21.
         Create a port under transactional RFC.(R3->XI)
         Designate the RFC destination created in prev step.
    Step 3)
         Goto SALE.
         Basic settings->Logical Systems->Define logical system.
         Create two logical systems(one for XI and the other for R3)
         Basic settings->Logical Systems->Assign logical system.
         Assign the R3 logical system to respective client.
    Step 4)
         Goto WE20.
         Partner type LS.
         Create two partner profile(one for XI the other for R3).
         Give the outbound or inbound message type based on the direction.
    Step 5)
         Not mandatory.
         Goto BD64.
         Click on Create model view.
         Add message type.
    Step 6)
         Goto WE19
         Give the basic type and execute.
         fill in the required fields.
         Goto IDOC->edit control records.
         Give the following values.(Receiver port,partner no.,part type and sender Partner no. and type)
         Click outbound processing.
    Step 7)
         Go to SM58
         if there are any messages then there is some error in execution.
         Goto WE02.
         Check the status of the IDOC.
         Goto WE47.
         TO decode the status code.
    BD87 to check the status of IDOC.
    In case if not authorized then go to the target system and check in SU53, see for the missing object
    and assign it to the user.
    SAP r3
    sm59(status check)(no message)
    WE02(status check)
    WE05(status check)
    BD87(status check)
    Xi
    IDx5(Idoc check)
    SU53(authorization check)
    reward points if helpful...
    MenoN

  • How to Setup Forward Error Handling in PI Scenarios. Can you help me with the same with screen shots if possible?

    Dear all
    How to Setup Forward Error Handling in PI Scenarios. Can you help me with the same with screen shots if possible?
    Thanks
    Regards
    karan

    Hello
    These are the following errors
    1. Trace level="1" type="T">no interface action for sender or receiver found</Trace>
    2. <Trace level="1" type="System_Error">Application-Error exception return from pipeline processing!
    3.
    <Trace level="1" type="T">Application Error at Receiver... => ROLLBACK WORK</Trace>  
    <Trace level="1" type="T">System Error at Receiver... => ROLLBACK WORK</Trace>  
    <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />  
    <Trace level="1" type="System_Error">Application-Error exception return from pipeline processing!</
    Trace level="3" type="T">No persisting of message after plsrv call, because of config</Trace>Trace level="3" type="T">Error of the prevous version:</TraceTrace level="3" type="T">Error ID APPLICATION_ERROR</Trace>
    tThere are repeating errors also.
    TThanks
    Regards
    kkaran

  • Query doesn't work in APD, Error: column store error: fail to create scenario: [340 2048

    Hi Experts,
    We got a problem here.
    We have a query ran without any problems in RSRT. But when I try to put it as data sources(infoprovider) in APD.
    I got following error:
    column store error: fail to create scenario: [340 2048
    We are in BW731006 & ABAP731006.
    Any advise?
    Thanks in advance!
    Tengran

    Hi,
    Can you check this part in error mentioned by clicking as highlighted in red box. It will give you a correct idea about the issue ::
    Also share the detailed error with us as well.
    Best Regards,
    Arpit

  • SUS - MM Scenario: notification mail not sent to all Supplier Users

    Hi,
    we're in a SUS-MM scenario and we publish Purchasing documents (PO and/or SAR) to SUS portal.
    The notification mail for new published documents are sent only to the e-mail address of the Supplier (imported from SAP to SUS) which is in the SAP Supplier Master data. But if the Admin supplier creates other users for the supplier (F1 / F2 / F3), the notification mail for new published PO/SAR are not sent to the mail address of F1 / F2 / F3 users. Is it the standard behavior or is there some missing customizing setting missing?
    Our customer wants that notification mail are sent to all the mail addresses of the Supplier Users.
    Has someone had this kind of requirement? and, if it is not achievable via standard customizing, which could be the right solution to meet this requirement?
    Thanks in advance

    Hi,
    This is a standard SAP process which SAP has provided,
    The other way is to develop a custom program,
    1) Select the Supplier.
    2) Check the available contact persons of the Supplier.
    3) When a document is created in ECC (Hope you are in MM-SUS), select the list of contact persons for Supplier. (I assume need a RFC FM to develop to SUS)
    4) Send a e-mail to all users linked with this Supplier.
    You can find the linked Contact persons in BP transaction and Table BUT000.
    Please change the Status of the Issue once your problem solved, other will get benefitted. If possible post the soulution.
    Thank you,
    Anil

  • Implementation costs SuS-SRM scenario (service procurement/web-based)

    Hi out there,
    I am currently trying to rough-estimate the implemantation costs for a SuS-SRM scenario (service procurement - supplier enablement/web-based) with all the components it requires:
    software-wise: SRM with SuS and XI would be needed
    Hardware-wise ? (rough estimate)
    Consulting fees ? (rough estimate)
    Current facts: SAP Enterprise 4.7 in use
    Or maybe somebody can refer me to a SAP price list. I have searched high and low with no positive result. A rough estimate would be good enough.
    kr
    Andre

    Dear Emmanuel,
    Yes you will not find the Interface mapping after the scenario generation. These SRM scenarios are Proxy communication scenarios and mainly involved with no change in structures.
    Regarding the Communication channels, yes you have to create the channels first, before the scenario generation.
    The SRM scenarios are mainly used with proxy communication and you have to create channels with adapter type XI.
    In your case - the scenario is - Service_Procurement_SupplierEnablement . you have to create two receiver communication channels. this scenario mainly exchanges data between EBP and SUS. the integration happens with the below interfaces-
    InvoiceConfirmation_Out, InvoiceRequest_Out,  PurchaseOrderRequest_Out, ServiceAcknowledgementConfirmation_Out, SupplierPortalTradingPartner_CreateOrChange_Out ,  InvoiceRequest_Out  etc.
    The Video I have uploaded  to this link-
    http://www.easy-share.com/1913995983/011000358700001939872008E.zip
    Please download the same, you need WebX player as it is a  .arf file.
    Thanks
    Sugata B Majumder

  • Invoice posting error MM-SUS scenario

    Hello
    We are implementing MM SUS scenario, when we send the invoice from SUS to MM, the invoice idoc failed with error "A company code cannot be determined for LS <supplier name>".
    We had done all the required configuration in OBCA, OBCD and OMRY as per the config documnet but still the IDOC is in error status. I understand from one of the forum threads an user exit is required but,  Is the user exit "EXIT_SAPLMRMH_011" really required to implement?
    Also I had already gone through the forum thread "Invoice creation failure but it doesnt help me even though all the configuration is in place.
    Please advice
    Regards
    Kiran

    Hi..
    Any inputs regarding above error?
    Thanks
    Kiran

  • ERROR WHILE RUNNING ODI SCENARIO FROM BAM ALERT

    We are using oracle data integrator 11g and have created an ODI Scenario and able to run the scenario from ODI studio client.
    We have done the configuration for BAM-ODI integration as mentioned in http://docs.oracle.com/cd/E21764_01/integration.1111/e10224/bam_odi.htm#BABEJIGD
    We have started ODI Agent, soa and bam servers. Created a BAM alert -> select action - Run ODI Scenario -> selected the same scenario.
    Alert ran at scheduled time but failed with following error:
    java.io.IOException : truncated data integrator frame received
    Error Message (if any)
    [2012-08-06T11:24:21.046+05:30] [bam_server1] [WARNING] []
    [oracle.bam.eventengine] [tid: bam-pool-Action-thread-1] [userId:
    OracleSystemUser] [ecid:
    3576f9092ef9497a:-743c430a:138fa7450c3:-8000-00000000000000a8,1:23453] [APP:
    oracle-bam#11.1.1] EventEngine: Error occured while running a ODI Scenario.
    [2012-08-06T11:24:21.250+05:30] [bam_server1] [ERROR] []
    [oracle.bam.eventengine] [tid: bam-pool-Action-thread-1] [userId:
    OracleSystemUser] [ecid:
    3576f9092ef9497a:-743c430a:138fa7450c3:-8000-00000000000000a8,1:23453] [APP:
    oracle-bam#11.1.1] EventEngine: Action exception: EEInstEv2 EEInstAct1 Rule
    Id: 2 exception: java.io.IOException: truncated Data Integrator Frame
    received
    [2012-08-06T11:24:21.250+05:30] [bam_server1] [WARNING] []
    [oracle.bam.eventengine] [tid: bam-pool-Action-thread-1] [userId:
    OracleSystemUser] [ecid:
    3576f9092ef9497a:-743c430a:138fa7450c3:-8000-00000000000000a8,1:23453] [APP:
    oracle-bam#11.1.1] EventEngine: Exception stack trace: [[
    at
    oracle.bam.eventengine.engine.event.action.RunScenario.invokeScenario(RunScena
    rio.java:145)
    at
    oracle.bam.eventengine.engine.event.action.ActionProcessor.runScenario(ActionP
    rocessor.java:891)
    at
    oracle.bam.eventengine.engine.event.action.ActionProcessor.actionHandler(Actio
    nProcessor.java:337)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at
    sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at
    sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.j
    ava:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at oracle.bam.system.Delegate$Sink.invoke(Delegate.java:80)
    at oracle.bam.system.Delegate.dynamicInvoke(Delegate.java:186)
    at
    oracle.bam.common.threading.threadpool.ThreadPoolController$PoolQueueItem.proc
    essWorkRequest(ThreadPoolController.java:155)
    at
    oracle.bam.common.threading.threadpool.ThreadPoolController$PoolQueueItem.run(
    ThreadPoolController.java:128)
    at
    java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java
    :886)
    at
    java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908
    at java.lang.Thread.run(Thread.java:619)
    Any help on this is highly appreciated...
    Thanks
    Rajdip Mukherjee

    Hi,
    Forgot to include the ODI classes RunScenario.invokeScenario() is invoking odi scenario using odi sdk api. Please see the below stack trace :-
    java.io.IOException: truncated Data Integrator Frame received
    at
    oracle.odi.sdk.invocation.internal.AgentNetworkCmd.readCmd(AgentNetworkCmd.java:303)
    at
    oracle.odi.sdk.invocation.OdiInvocation.invokeCommand(OdiInvocation.java:176)
    at
    oracle.bam.eventengine.engine.event.action.RunScenario.invokeScenario(RunScenario.java:140)
    at
    oracle.bam.eventengine.engine.event.action.ActionProcessor.runScenario(ActionProcessor.java:891)
    at
    oracle.bam.eventengine.engine.event.action.ActionProcessor.actionHandler(ActionProcessor.java:337)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at
    sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at
    sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    Thanks
    Rajdip Mukherjee

  • Error while executing a scenario from CMD

    I am trying to execute a scenario from CMD using the starctscen command.
    when I use the below command
    E:\OraHome_ODI\oracledi\bin\startscen EXT_DATA 002 GLOBAL
    it is executing correctly
    but I tried to create a sceduler for the execution where i used the below command
    C:\Documents and Settings\Desktop>"E:\OraHome_ODI\oracledi\bin\startscen.bat" EXT_DATA 002 GLOBAL
    and it is giving me the following error
    The system cannot find the path specified.
    OracleDI: Starting scenario EXT_DATA 002 in context GLOBAL ...
    'oracle.odi.Agent' is not recognized as an internal or external command,
    operable program or batch file.
    can someone help me on this.
    Thanks,
    Sri

    In the batch File write this way
    cd E:\OraHome_ODI\oracledi\bin
    E:
    startscen EXT_DATA 002 GLOBAL In case you are providing the values (EXT_DATA 002 GLOBAL) as parameter
    then call the startscen this way
    cd E:\OraHome_ODI\oracledi\bin
    E:
    startscen %1 %2 %3

  • Mapping related errors in SOAP Adapter scenario

    Hello Friends
    I have done this several times and in this particular case I am getting some errors.
    Here is the scenario
    External  --- (SOAP) ---  XI  -
    (RFC) -
    SAP TABLE.
    Program
    I have created an XSD (External definition) to get the data to XI using SOAP Adapter.
    I have done the mapping and everything looks Ok to me. I even restarted my XI server. All other scenarios are working except for this particular scenario in question.
    When I looked at <SXMB_MONI> I see the xml string coming in correctly with proper tags and data as expected.
    However, it is failing with some mapping errors.
    Here is the error message I got in SXMB_MONI
    Any help will be greatly appreciated.
      <Trace level="1" type="T">Interface Mapping http://cincom.com/config AddConfigDNA</Trace>
      <Trace level="1" type="T">RuntimeException during appliction Java mapping com/sap/xi/tf/_AddConfigDNARequest_</Trace>
      <Trace level="1" type="T">com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns1:ZBAPI_ADD_CONFIG_DNA. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:403) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:141) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:102) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy177.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:219) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:169) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java:156) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java:7701) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java:2376) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java:1700) at com.sap.mw.jco.JCO$Server.listen(JCO.java:8061) at com.sap.mw.jco.JCO$Server.work(JCO.java:8181) at com.sap.mw.jco.JCO$Server.loop(JCO.java:8128) at com.sap.mw.jco.JCO$Server.run(JCO.java:8044) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Root Cause: com.sap.aii.mappingtool.tf3.IllegalInstanceException: Cannot produce target element /ns1:ZBAPI_ADD_CONFIG_DNA. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:283) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:398) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:141) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:102) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy177.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:219) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:169) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java:156) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java:7701) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java:2376) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java:1700) at com.sap.mw.jco.JCO$Server.listen(JCO.java:8061) at com.sap.mw.jco.JCO$Server.work(JCO.java:8181) at com.sap.mw.jco.JCO$Server.loop(JCO.java:8128) at com.sap.mw.jco.JCO$Server.run(JCO.java:8044) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)</Trace>
      <Trace level="1" type="T">Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_AddConfigDNARequest_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; RuntimeException in Message-Mapping transformation: Cannot produce target element /ns1:ZBAPI_ADD_CONFIG_DNA. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd</Trace>
      <Trace level="1" type="T">com.sap.aii.ibrun.server.mapping.MappingRuntimeException: Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_AddConfigDNARequest_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; RuntimeException in Message-Mapping transformation: Cannot produce target element /ns1:ZBAPI_ADD_CONFIG_DNA. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:73) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy177.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:219) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:169) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java:156) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java:7701) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java:2376) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java:1700) at com.sap.mw.jco.JCO$Server.listen(JCO.java:8061) at com.sap.mw.jco.JCO$Server.work(JCO.java:8181) at com.sap.mw.jco.JCO$Server.loop(JCO.java:8128) at com.sap.mw.jco.JCO$Server.run(JCO.java:8044) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Root Cause: com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns1:ZBAPI_ADD_CONFIG_DNA. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:403) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:141) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:102) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy177.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:219) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:169) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java:156) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java:7701) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java:2376) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java:1700) at com.sap.mw.jco.JCO$Server.listen(JCO.java:8061) at com.sap.mw.jco.JCO$Server.work(JCO.java:8181) at com.sap.mw.jco.JCO$Server.loop(JCO.java:8128) at com.sap.mw.jco.JCO$Server.run(JCO.java:8044) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Root Cause: com.sap.aii.mappingtool.tf3.IllegalInstanceException: Cannot produce target element /ns1:ZBAPI_ADD_CONFIG_DNA. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:283) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:398) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:141) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:102) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy177.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:219) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:169) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java:156) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java:7701) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java:2376) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java:1700) at com.sap.mw.jco.JCO$Server.listen(JCO.java:8061) at com.sap.mw.jco.JCO$Server.work(JCO.java:8181) at com.sap.mw.jco.JCO$Server.loop(JCO.java:8128) at com.sap.mw.jco.JCO$Server.run(JCO.java:8044) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)</Trace>
      <Trace level="1" type="E">CL_XMS_PLSRV_MAPPING~ENTER_PLSRV</Trace>
      </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
    - <!--  ************************************
      -->
      </SAP:Trace>
      </SOAP:Header>
    - <SOAP:Body>
    - <SAP:Manifest xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="wsuid-manifest-5CABE13F5C59AB7FE10000000A1551F7">
    - <SAP:Payload xlink:href="cid:[email protected]">
      <SAP:Name>MainDocument</SAP:Name>
      <SAP:Description>Main XML document</SAP:Description>
      <SAP:Type>Application</SAP:Type>
      </SAP:Payload>
      </SAP:Manifest>
      </SOAP:Body>
      </SOAP:Envelope>

    Hi Ram,
    This error is due to error in message mapping.The map rules you have specified for the Node: "ZBAPI_ADD_CONFIG_DNA" is not getting satisfies due to which it is unable to create the Node who occurance is mandatory.Check if map rule specified for this particular Node.
    Thanks,
    Bhargav.
    Note:Award Points if found useful

  • Error in SUS with confirmation for service (MM-SRV)

    Hi everyone,
    We are trying to configure the MM-SRV sceanrio in SRM 7 and ECC 6 Ehp 4.
    We have a problem, when we send a Service PO from ECC to SUS, everything is fine. Then we make the Purchase Orde Responce (POR) and it is OK, but when we try to make the confirmation the system sends the error:
    Action has errors  
    You are not authorized to call this action.
    You can continue with one of the following actions
    -Start Page
    -List of Purchase Orders
    -Display Purchase Order
    We try assigning "SAP_ALL" to the user, but the error continues. Do you know what can be the issue?
    Thanks,
    Ivá

    Hi Ivan,
    This a known SAP bug. Pl  implement below note.
    Note 1263921 - Customizing entries required for SUS confirmation.
    Once you run the program mentioned in the note, it would work.
    Regards,
    Sanjeev

  • Error when running a scenario from Command Prompt

    Hi I edited the parameter file and I am trying to run an interface that joins two tables from HR schema and loads into a table in different schema. I am able to run this in the Designer, but I receive an error message when I try to run it through command prompt.
    Here is the error message I get when I try to run it
    09/09/2009 11:58:42 AM(main): Creating session for scenario:DEMO_INTERFACE - 001
    09/09/2009 11:58:42 AM(main): Session : 88010 is running
    com.sunopsis.core.SnpsInexistantObjectException: There is no connection for this
    logical schema/context pair:HR / GLOBAL
    at com.sunopsis.dwg.dbobj.SnpConnect.getSnpConnectByLSchemaNameAndContex
    t(SnpConnect.java)
    at com.sunopsis.dwg.dbobj.SnpConnect.getSnpConnect(SnpConnect.java)
    at com.sunopsis.dwg.dbobj.SnpSession.getDwgConnectLst(SnpSession.java)
    at com.sunopsis.dwg.dbobj.SnpSession.getConLst(SnpSession.java)
    at com.sunopsis.dwg.cmd.DwgCommandScenario.treatCommand(DwgCommandScenar
    io.java)
    at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
    at com.sunopsis.dwg.cmd.e.i(e.java)
    at com.sunopsis.dwg.cmd.e.y(e.java)
    at com.sunopsis.dwg.DwgJv.treatCmd(DwgJv.java)
    at com.sunopsis.dwg.DwgJv.main(DwgJv.java)
    at oracle.odi.Agent.main(Agent.java)
    09/09/2009 11:58:43 AM(main): Session : 88010 finished with return code : -1
    com.sunopsis.core.SnpsInexistantObjectException: There is no connection for this
    logical schema/context pair:HR / GLOBAL
    at com.sunopsis.dwg.dbobj.SnpConnect.getSnpConnectByLSchemaNameAndContexur
    t(SnpConnect.java)
    at com.sunopsis.dwg.dbobj.SnpConnect.getSnpConnect(SnpConnect.java)
    at com.sunopsis.dwg.dbobj.SnpSession.getDwgConnectLst(SnpSession.java)
    at com.sunopsis.dwg.dbobj.SnpSession.getConLst(SnpSession.java)
    at com.sunopsis.dwg.cmd.DwgCommandScenario.treatCommand(DwgCommandScenar
    io.java)
    at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
    at com.sunopsis.dwg.cmd.e.i(e.java)
    at com.sunopsis.dwg.cmd.e.y(e.java)
    at com.sunopsis.dwg.DwgJv.treatCmd(DwgJv.java)
    at com.sunopsis.dwg.DwgJv.main(DwgJv.java)
    at oracle.odi.Agent.main(Agent.java)
    DwgJv.main: Exit. Return code:-1
    Thank you for your help.
    Kranthi

    Hello,
    Try to remove and recreate your package and scenario, I had the same issue and solved doing it.
    It seems for me that the package cannot update its contents, for example, if you change something in your interface, you must recreate your package and scenario to update the changes.
    What ODI version do you use? If you use an old version, try to update to ODI 10.1.3.5
    Regards,
    Wallace Galvão
    São Paulo - Brazil

Maybe you are looking for

  • 'Adobe Reader has stopped working' error message

    I've recently updated from Adobe Reader X to Adobe Reader XI using Adobe Cleaner and installer from the website. Whenever I open a pdf file or start the Reader the following error occurs and closes the program: 'Adobe Reader has stopped working'. Thi

  • Vlc and kernel panic

    i've been using VLC on mac osx since a long time, and never got any issues couple months ago, i upgraded my 2009 macbook pro into mbp retina late 2013 model (15 inch with geforce 750m gfx), vlc always cause kernel panic now and then (causing the syst

  • Task Assignment Adapter Error

    Hi I have developed a task assignment adapter for approval.I am hardcoding the group name and then qurtying database to find the group.Then from the resultset I am getting the value of the group key.and then I m writing two tasks to get the key and t

  • I am trying to get my airport extreme to extend my telstra 4G wi-fi network , and i have turned sharing on, but have no green light on the capsule.

    i don't know what i am doing wrong and have tried to follow instructions on the discussion page , set up extend network and shareing on, but i still don't have a green to go on the base station, and either have to be on my 4G telstra network , or bac

  • 27 monitor not working with windows 8

    I have Windows 8 running with Bootcamp 5 installed on MBP 15" Retina.  Thunderbolt is working for networking and other peripherals - EXCEPT my 27" monitor.  I can't load the Intel drivers because an error message of "not supported" keeps popping up.