PO: FINAL_ENTRY indicators gets removed after DEL_IND is set

Hello,
I have the following problem in SRM7.0 (ext.classic scenario):
I have a PO and for item 1 the final entry indicator is set. Now the deletion indicator for this line item will be set too. For some reason the final entry indicator gets removed on the UI. After saving this PO to the database everything is fine.
Why is the final entry indicator removed on the UI when the deletion indicator is set? What would be a good point to start debugging? Those two indicators are placed on different components.
Kind regards,
Thomas

Swetha,
Find some details on Final Entry in OSS note 1140861:
1. When FINAL_ENTRY flag is set automatically?
In case of goods PO the flag will be set automatically if PO quantity is equal to GR quantity and no tolerances were maintained.
In case of service PO it must be set explicitely and manually. Other restriction in case of service final entry is that the flag cannot be set with zero quantity, note: 1076158.
2. When FINAL_ENTRY flag is reset automatically?
It is synchronized to MM PO using scheduled job BBP_GET_STATUS_2.
Note 718138 enabled FINA_ENTRY read, if it was set in the Backend.
It is reset, for example, if PO quantity changed and further GR are expected. Notes: 862506, 980694, 812564.
If FINAL_ENTRY flag is reset unjustified, please apply the enclosed notes.
3. How is FINAL_ENTRY flag converted in the MM PO?
SRM final entry indicator FINAL_ENTRY correpsonds to MM delivery completed indicator ELIKZ.
Since SAP_APPL 470 there was complete delivery indicator EKKO-AUTLF in MM PO header which has no use (also not for GR postings) as of note 31663.
In SRM PO close/finish is additionally set thru PO status (I1180).
FINAL_ENTRY flag of SRM/MM PO should be in synch, note: 906151.
4. Which processes are triggered by FINAL_ENTRY flag?
PO display (BBP_POC): if all PO items have FINAL_ENTRY key set, it should not be displayed anymore using Purchasing Cockpit.
Confirmation creation (BBPCF02,BBPSC03): s.a.
Return delivery (BBPCF02,BBPCF03): after return delivery FINAL_ENTRY flag must be reset to be able to create new confirmations. Notes: 872011, 1031298, 1132666.
Sourcing (BBPSOCO01): s.a.
Regards
Rakesh Palle

Similar Messages

IDE drive automatically gets removed after sometime

Hi,
I got a 40GB Samsung SP0411N HDD that is 5+ years old.
I have a P965 Neo2 M/B with BIOS updated to v3.8
I also have another 250GB WD SATA HDD
OS: Win XP SP3
The Samsung drive when used alone (without the SATA HDD attached) works fine. But when i attach both the HDD then my samsung HDD gets removed from the system after some time.
I also see these msg in event logs:
Event ID 9: The device, \Device\Ide\IdePort0, did not respond within the timeout period.
Event ID 51: An error was detected on device \Device\Harddisk0\D during a paging operation.
I donot think that the drive has any problems because it functions fine when used alone.
Is anyone aware of this scenario. Any ideas on what needs to be done to correct this problem.
Thanks a lot.

These are the HDtune test results:
HD Tune: SAMSUNG SP0411N Benchmark
Transfer Rate Minimum : 29.6 MB/sec
Transfer Rate Maximum : 52.9 MB/sec
Transfer Rate Average : 45.3 MB/sec
Access Time : 14.1 ms
Burst Rate : 70.7 MB/sec
CPU Usage : 1.8%
HD Tune: SAMSUNG SP0411N Information
Firmware version : TW100-11
Serial number : S01JJ50X467321
Capacity : 37.3 GB (~40.1 GB)
Buffer size : 2048 KB
Standard : ATA/ATAPI-7
Supported mode : UDMA Mode 5 (Ultra ATA/100)
Current mode : UDMA Mode 5 (Ultra ATA/100)
S.M.A.R.T : yes
48-bit Address : yes
Read Look-Ahead : yes
Write Cache : yes
Host Protected Area : yes
Device Configuration Overlay : yes
Automatic Acoustic Management: yes
Power Management : yes
Advanced Power Management : no
Power-up in Standby : no
Security Mode : yes
Firmware Upgradable : yes
Partition : 1
Drive letter : L:\
Label : New Volume
Capacity : 18182 MB
Usage : 43.64%
Type : NTFS
Bootable : No
Partition : 2
Drive letter : O:\
Label : New Volume
Capacity : 20010 MB
Usage : 5.65%
Type : NTFS
Bootable : No
HD Tune: SAMSUNG SP0411N Health
ID Current Worst ThresholdData Status
(01) Raw Read Error Rate 100 100 51 3 Ok
(03) Spin Up Time 73 61 0 4928 Ok
(04) Start/Stop Count 93 93 0 7726 Ok
(05) Reallocated Sector Count 253 253 10 0 Ok
(07) Seek Error Rate 253 253 51 0 Ok
(08) Seek Time Performance 253 253 0 0 Ok
(09) Power On Hours Count 100 100 0 557910 Ok
(0A) Spin Retry Count 253 253 49 0 Ok
(0C) Power Cycle Count 97 97 0 4032 Ok
(C2) Temperature 121 109 0 39 Ok
(C3) Hardware ECC Recovered 100 100 0 91800886 Ok
(C4) Reallocated Event Count 253 253 0 0 Ok
(C5) Current Pending Sector 253 253 10 0 Ok
(C6) Offline Uncorrectable 253 253 10 0 Ok
(C7) Ultra DMA CRC Error Count 100 100 51 38 Ok
(C8) Write Error Rate 100 100 51 0 Ok
(C9) TA Counter Detected 100 100 51 3 Ok
Power On Time : 557910
Health Status : Ok
HD Tune: SAMSUNG SP0411N Error Scan
Scanned data : 38189 MB
Damaged Blocks : 0.0 %
Elapsed Time : 14:45
Everything looks good in here.
Also before i ran these test, i connected my HDD with the far end of the IDE cable. Earlier it was connected with the middle end. And the drive is still showing in My Computer.
Will change back to older settings to check if the cable is faulty.
Any suggestions, or any updates that i should apply.
Thanks

Clips get removed after adding to timeline...?

First time with iMovie. I am trying to create a short film. I imported my movie from my camcorder (it put it nicely into clips), but then when i add certain clips to the timeline, they get removed from the main clips library. So if i wanted to use the clip again, or a certain section of the clip, i have to keep going back in my movie and copying the specific clip i need, which takes forever to find. If i've trimmed the clip in the timeline, i can't review the entire clip anymore.
Basically i need the clips to stay in the library. Is this possible?
thanx.
macMini Mac OS X (10.4)

... when i add certain clips to the timeline, they get removed from the main clips library...
this is the concept of this piece of software
if i wanted to use the clip again, ..., i have to keep going back in my movie and copying the specific clip i need
not needed.
select specific clip in timeline (line mode or "slides" mode)
hit Apple-C
drag playhead to new position
hit Apple-V
done
read http://www.apple.com/ilife/tutorials/imovie/
use "Help" in iMovie...

Podcasts sync to iTunes, but then get removed after a period of Time??

Hi,
I was wondering if you could help me out with this
I have 43 episodes up on podbean but I can only download my previous 20 episodes on iTunes?
I would like all of my episodes to stay on iTunes all time like I see with other podcasts.
Thanks for any help you can offer,
RB

Many podcast creation programs or services limit the number of episodes shown in the feed, removing older ones once the limit is reached and new episodes are added. Evidently Podbean is limiting you to 20. There is usually a setting somewhere to increase this limit, so you will need to look in Podbean's settings. iTunes itself does not limit the number until you get to 300.

File association gets removed after shutdown

Hello,
I usually use firefox for browsing and VLC for viewing avi files. I also use QuickTime for playing mp3's (iTunes is used for managing my mp3 library etc.).
By default Safari, QuickTime and iTunes are used to play the formats I described above. By changing the default application (and applying 'Change All'), everything works as planned.
The weird part is that when I reboot / shutdown my MBP, ALL ASSOCIATIONS are reset to their original applications. So everytime I reboot I need to change the application for HTML, MP3 and AVI files.
It seems that the 'change all' doesn't write the changes to disk, but keeps them in RAM (or something).
I have no idea where the associations are kept on disc, so I have no way of checking if these are set correctly.
I already reset the permissions etc. by using the apropriate tools which came with OSX. I'm using FileVault for protecting my userdata. Apart from that everything is pretty standard.
All ideas are welcome

update on the problem:
Logging out and logging in doesn't remove the association. So it only occurs when I reboot or shut the system down.

SMS agent host service is not getting removed from Service.msc even after complete uninstallation

Dear Team,
i am trying to uninstall SCCM agent but still i am seeing "SMS agent host" in services.msc . But this service is getting removed after the client restart . But i want to clear this service without restarting the client.
Please find the below screen . Can some one help me on this
Raja

Hi Jason,
This is happening on random machines ... Even i tried for sc delete servicename .. which is not working but if i try
sc query ccmexec i am getting an output saying that service is stopped (but i am unable to remove)
Would be great if i get some solution ..
Raja

Local administrators groups removed after gpupdate from windows 7 64bit VM

Hi,
I have a windows 7 workstation. And whenever I add any group into the local admins it get removed after running up of gpupdate or restart of the machine.
I have tried to give group from AD to that computer name, into the security tab but that also didn't help me to overcome from this problem.
Also OU of the computer is right where other machines are lying and those machines local admins doesn't remove.
This problem started after I fixed the issue of temp profile creation into the workstation.
Kindly provide some solution that I can implement from AD, workstation or ADSI edit...
AD is on Windows server 2008 R2. Also nothing change on group policy side.

Please run gpresult and check the policy applied and did you use any Group Policy Restricted Groups
http://support.microsoft.com/kb/279301/en-us
Meanwhile, pay attention to the group policy precedence
http://technet.microsoft.com/en-us/library/cc785665(v=ws.10).aspx
It is recommended to ask in this forum
Windows Sever\Group Policy Forum
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverGP
Yolanda Zhu
TechNet Community Support

How InDesign comes to know about any changes on document, but not saved. As it shows * on the name of document when it is opened and any changes. And after saving * symbol is get removed from the name of document. How and where indesign@ handles this?

How InDesign comes to know about any changes on document, but not saved. As it shows * on the name of document when it is opened and any changes.
And after saving * symbol is get removed from the name of document. How and where indesign@ handles this?

Are you just asking because you want to know, or do you have a problem you need to solve? I don't know how to write a program, but I think what your are describing is not an unusual thing for a program to do. The * tells you that changes have been made since the last save, and the program reserves a portion of memory for undo functions. I suppose a coder could tell you how it works, but I don't think it would help an average user to know, but that's just my opinion.

Does all my music stay on my MacBook Pro after I sign up for iTunes Match, or does it get removed from my Mac?

Does all my music stay on my MacBook Pro after I sign up for iTunes Match, or does it get removed from my Mac?

Hi,
It remains on your hard drive. iTunes match scans your library to determine if tracks are matched or uploaded. It does not touch the files on your hard drive. You have the option to upgrade tracks for matched versions but you need to delete tracks and download new versions.
You can camn opt to delete tracks from your library. This will free up space and you will be able to stream your music. In any event, I suggest that you back up your music to an external drive.
jim

I have removed the passcode from my ipad but still it is getting locked after sometime what can be reason for this?

I have removed the passcode from my ipad but still it is getting locked after sometime what can be reason for this?

Can you pls guide that when I am restoring my ipad from itunes do i need to restore as new or from backup?????
Also is this problem realted to using same apple id for two ipad..... Pls help and regarding ur suggesting of messing with my ipad , I will keep a check ..

My iPhone 5s on ios 8.1.2 is stuck at Apple logo or recovery mode.. To fix this issue, i need to update it to ios 8.2 through itunes.. I want to ask that my data i.e. Photos and other personal data would be removed after updating it or not..?

My iPhone 5s on ios 8.1.2 is stuck at Apple logo or recovery mode.. To fix this issue, i need to update it to ios 8.2 through itunes.. I want to ask that my data i.e. Photos and other personal data would be removed after updating it or not..?
if yes then how can i save my data or get out of recovery mode.. Is there any safe mode or something like that on which i could access my data..
P.S. I have not taken any backup of my iPhone on itunes..
Please help me sort out this issue..

Recovery mode doesn't mean that all your data is already lost. You only lose your data if you restore it.
When you plug the phone is into iTunes hold down the home button. iTunes may then give you the option JUST to update the software first. This should not get rid of any data.
However, if iTunes is only giving you the option to RESTORE and update, then you will lose your data I'm afraid.
Hope that helps!

Blocking Indicator not getting removed on milestone confirmation in PS

Dear Experts,
I have a issue in my project.
We have a scenario where Preq and PO getting created from PS activity.
We are using Invoice plan in this scenario. created in the Activity.
When we create Milestone and Invoice plan it will go for release process to get Preq released. after this PO will be created and GR will be done.
Problem: When PS confirms the Activity the blocking sign in PO invoicing plan is not getting removed.
Please explain me:
What configuration settings required to remove the blocking sign indicator in PO automatically.
Tell me Process steps if any.
Appreciate early response.
BR,
Arun

Awaiting kind replies.

8900 Smartphone getting hang after boot

I had problem with the 8900 Smartphone, All Contacts, Call logs used to get erase after i boot up the bb after removing the battery. so I upgraded the bb with 8900jEastAsia_PBr5.0.0_rel1168_PL5.2.0.67_A5.0.0.681_Redington__India__Limited. But after installing this version my bb takes long time to boot and get hang on white screen with BB logo. I'm trying to downgrade the version but not able to do so.. Please advise soon.

In that case, have you try updating the latest BIOS, chipset driver, USB driver(if any) from your mainboard website.
Jason

Where does an abap program get stored after save?

Where does an abap program get stored after save? ...plzz tell
Edited by: Alvaro Tejada Galindo on Feb 18, 2008 11:28 AM

this program download the code to presentation server
Analyse this code.
CHECK IT IN DEBUGGING
REPORT zdownload_source MESSAGE-ID zabap.
TABLES: trdir.
SELECT-OPTIONS: repo FOR trdir-name.
PARAMETERS: path(60) TYPE c DEFAULT 'C:\programs\'.
DATA: BEGIN OF tabsource OCCURS 10,
 source(72) TYPE c,
 END OF tabsource.
DATA: BEGIN OF tabtext OCCURS 50,
 tab LIKE textpool ,
 END OF tabtext.
DATA: BEGIN OF tabrdir OCCURS 100,
 rdir LIKE trdir,
 END OF tabrdir.
DATA: filename LIKE rlgrap-filename,
 mode TYPE c VALUE ' ',
 rdirrows TYPE i,
 sourcerows TYPE i,
 rc TYPE i,
 length TYPE i.
FIELD-SYMBOLS: .
DATA: ok TYPE i VALUE 0,
 fail TYPE i VALUE 1.
AT SELECTION-SCREEN.
DATA: i TYPE i.
DESCRIBE TABLE repo LINES i.
IF i <= 0.
 SET CURSOR FIELD repo.
 MESSAGE i001 WITH 'se message class'.
ENDIF.
START-OF-SELECTION.
CONDENSE path NO-GAPS.
length = strlen( path ).
SUBTRACT 1 FROM length.
ASSIGN path+length(1) TO .
IF <> '\'.
 ADD 1 TO length.
 ASSIGN path+length TO .
 = '\'.
ENDIF.
SELECT * FROM trdir
 INTO TABLE tabrdir
 WHERE name IN repo.
DESCRIBE TABLE tabrdir LINES rdirrows.
CHECK rdirrows > 0.
LOOP AT tabrdir.
 MOVE tabrdir TO trdir.
 PERFORM download_sourse USING rc.
 CHECK rc = ok.
* PERFORM download_textpool USING rc.
ENDLOOP.
write :/ sy-dbcnt , ' number of programs downloaded'.
*& Form download_sourse
* text
* -->P_RC text
FORM download_sourse USING rc.
rc = fail.
CLEAR: tabsource, filename.
REFRESH: tabsource.
READ REPORT trdir-name INTO tabsource.
DESCRIBE TABLE tabsource LINES sourcerows.
CHECK sourcerows > 0.
CALL FUNCTION 'STRING_CONCATENATE_3'
 EXPORTING
 string1 = PATH
 string2 = TRDIR-NAME
 string3 = '.ABA'
 IMPORTING
 string = FILENAME
 EXCEPTIONS
 too_small = 1
* OTHERS = 2
IF sy-subrc <> 0.
WRITE: 'AAAA'.
ENDIF.
CONDENSE filename NO-GAPS.
PERFORM download TABLES tabsource USING filename rc.
ENDFORM. " download_sourse
*& Form download_textpool
* text
* -->P_RC text
FORM download_textpool USING p_rc.
rc = fail.
CLEAR: tabtext, filename.
REFRESH: tabtext.
READ TEXTPOOL trdir-name INTO tabtext LANGUAGE sy-langu.
DESCRIBE TABLE tabtext LINES sourcerows.
CHECK sourcerows > 0.
CALL FUNCTION 'STRING_CONCATENATE_3'
 EXPORTING
 string1 = path
 string2 = trdir-name
 string3 = '.TXT'
 IMPORTING
 string = filename
 EXCEPTIONS
 too_small = 1
* OTHERS = 2
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
PERFORM download TABLES tabtext USING filename rc.
ENDFORM. " download_textpool
*& Form download
* text
* -->P_TABTEXT text
* -->P_FILENAME text
* -->P_RC text
FORM download TABLES tabtext
 USING filename
 rc.
rc = fail.
CALL FUNCTION 'WS_DOWNLOAD'
 EXPORTING
* BIN_FILESIZE = ' '
* CODEPAGE = ' '
 FILENAME = filename
 FILETYPE = 'ASC'
 MODE = 'MODE'
* WK1_N_FORMAT = ' '
* WK1_N_SIZE = ' '
* WK1_T_FORMAT = ' '
* WK1_T_SIZE = ' '
* COL_SELECT = ' '
* COL_SELECTMASK = ' '
* NO_AUTH_CHECK = ' '
* IMPORTING
* FILELENGTH =
 TABLES
 data_tab = TABTEXT
* FIELDNAMES =
* EXCEPTIONS
* FILE_OPEN_ERROR = 1
* FILE_WRITE_ERROR = 2
* INVALID_FILESIZE = 3
* INVALID_TYPE = 4
* NO_BATCH = 5
* UNKNOWN_ERROR = 6
* INVALID_TABLE_WIDTH = 7
* GUI_REFUSE_FILETRANSFER = 8
* CUSTOMER_ERROR = 9
* OTHERS = 10
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF sy-subrc <> 0.
 WRITE: / sy-subrc, ' message declare '.
ENDIF.
rc = sy-subrc.
ENDFORM. " download
regards.
santhosh reddy
<REMOVED BY MODERATOR>
Edited by: Santhosh Reddy on Feb 13, 2008 6:48 PM
Edited by: Alvaro Tejada Galindo on Feb 18, 2008 12:00 PM

App updates are not removed after installing in update screen of iPhone and iPad

Whenever there is an update for an app, the same is displayed in the update screen of the App Store in both iPhone and iPad. After downloading and installing the patch, the app is not removed from the update screen. In earlier iOS versions, the same gets removed and only the pending apps for update remain.
Questions:
Is this a bug?
Will this not increase the update screen list of patch updates over time?
Why are the updated patches not removed from the update screen?

This is not a bug.
The updated apps will start disappearing after about two weeks (on a first in first out basis)

PO: FINAL_ENTRY indicators gets removed after DEL_IND is set

Similar Messages

Maybe you are looking for