PO message output problem

Dear Friends,
In ME9F message output...when i am looking PO output in Display message....
1.The  ECC No. of my company is showing blank  and
2.The contact person name is coming of my company,suppose 'xyz' and i want to change it with partcular person name .
Where i can define and change this configuration, please help me...
Thanks
Vijay Sharma

Thanks  to all for useful information.....my problem has been solved -we can define ECC no. in J1ID - Excise indiactor for plant
and Contact person name would be define when we create Purchasing Group , there we will define this in Description Purc. grp. field  we can directly change this in table T024 also. Dear Friends Ashok and chandu...your information is also correct and useful ...thanks to both
Edited by: VijayJSharma on Apr 20, 2011 7:56 AM

Similar Messages

  • Problem with message output ME9F

    Hi All,
    I am using T-code ME9F - Message Output: Purchase Orders in PRE module to get Purchase Orders in pdf format.
    In the pdf file, the text formatting gets lost, there are breaks in the text, even in the middle of the words.
    e.g.:
    in SAP:
    are applicable
    in the pdf file:
    are ap
    plicable
    Does anyone know, why this happens, and if there is a way to solve it? (Now I have to convert each and every document to word, copy the text again, format it, and convert the document back to pdf)
    Many thanks in advance!
    Virág

    Virag buddy, we on AS Java dont have T-codes I guess your question is in wrong section, must be MM?
    cheers

  • Message output(IDoc) from MIGO creates multiple idocs repeats for each line

    Hi Experts,
    We want to send one idoc message thru MIGO output message control upon posting at HEADER level regardless of how many line items are there on the Purchase Order.
    Using MIGO we are doing a 101 goods receipt on a PO with 3 line items and we are getting 3 idocs created with the same information form the message output control(basically it is at item level).
    I don't know if this is how standard SAP designed the MM message output control.
    From MIGO or MB03 there is no option to display the messages at the header level because you have to go thru the line item details to see the messages
    I have also tried the collective slip option on MIGO and it did not work(help suggests that it will combine everything in one output)
    Can you please let me know if there is a config or development that needs to made on controling the message output at the header level from MIGO.
    Thanks for all your help
    Shraj

    Hi Sri hari Raju.
    Did you solve this problem?
    Can you tell me how?
    Thanks

  • Service Entry: No message Output

    Hi,
    I created some new purchasing groups and it run well until the release strategy of PO.
    But after I created service entry and accepted it, it said that 'no message output', and I can't print the entry sheet through ML83 (it said 'no suitable purchasing document').
    I think it's related with the new purch group, because when I create the same PO, but using the old Purch group, I still can print it on ML83 and when I checked entry sheet->message; I could find that there's an output. But why it doesn't work for the new purchasing group? any idea, friends??
    Thanks a bunch,
    Nasikhin

    Hi Pankaj & Mahesh, thanks for the suggestions.
    @Pankaj:
    I've tried to go to MN13, but i couldn't find any record on the list. So, I just create a record for the new purchasing group, and saved it..
    Then I tried to create PO and SE again, but the problem wasn't resolved.. i still can't print the Entry sheet.
    @Mahesh:
    I couldn't find the path u gave, but I think it should be 'SPRO->MM->Purchasing->Message->assign output device to purchasing group.
    But seems that it's not the solution. because the other purchasing group are not assigned to any printer as well. anyway i tried to assign a printer to the new purchasing group.
    and I tried to create service entry..I accepted it and the problem still exist.. "No message record could be found for output of message."
    Any other suggestion?
    Many thanks,
    Nasikhin

  • Unexpected issue of error message (output 00 001)

    Dear Guru's
    Please help me to come out from this issue , iam getting this massage in VL10b t-code
    Unexpected issue of error message (output 00 001) massage VR555
    Thanks
    Caprin

    Hi Srinath,
    I noticed that you helped with the problem reported above.
    I'm having the same problem and can not find what could be wrong.
    When I try to create a delivery from the transaction VL10B, gives the following message:
    Unexpected issue of error message (output 8B 213)
    Message no. VR555
    Could you help me?
    Tks
    Lucas

  • Premiere Elements 12 output problem

    I am having problems outputting my project. Different errors messages.  One says transcoding error.  Another time it says export error.  Other times it crashes. And then the program won't even open. 
    Any suggestions?
    bwatson9

    Steve,
    First, thank you for your prompt response.  This is the first time I have used Premiere Elements 12.  I don't seem to have a manual for the software.
    The product was bought with my new computer.  I am using windows 8.1 (64-bit) with Intel Core i7-4770 CPU @ 3.40GHz.  I have 12 GB of installed RAM.  I have 1TB hard drive of which this is the first project I done. 
    I have checked to make sure that I am getting all Windows and Microsoft Updates.  I even manually went to Windows Update and installed the optional updates.
    The project is a 20 min. video using mostly photos and 2 small video clips.  The project is saved in its own folder.
    When I go to the timeline in Expert view I do see an orange-yellow line above the timeline.  It runs the whole length of the project.
    I understand from reading the FAQ's that each photo cannot be larger than 1000 x 750 pixels.  I will check that and reduce their size.  Is there anything else that I need to do?
    Where can I find a manual?
    Thanks,
    bwatson9
    Date: Sun, 23 Mar 2014 06:31:03 -0700
    From: [email protected]
    To: [email protected]
    Subject: Premiere Elements 12 output problem
        Re: Premiere Elements 12 output problem
        created by Steve Grisetti in Premiere Elements - View the full discussion
    A lot depends on a lot.
    What operating system are you using? What processor do you have and how much RAM and how much free space is on your hard drive?
    How long is your project? What model of camcorder is your video coming from and what format and resolution is it?
    Have you ensured that your project file is saved to its own folder, with no other project files in this folder?
    When you add your video to your timeline in Expert view, do you see a yellow-orange line above the clips, along the top of the timeline? This indicates a mismatch between project settings and video specs.
    If you are on a Windows computer, have you set up your computer to get both Windows and Microsoft Updates -- and have you manually gone to Windows Update and ensured you have even the optional updates that don't install automatically?
    When did you last run Disk Cleanup and Disk Defragmenter?
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6234402#6234402
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6234402#6234402
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6234402#6234402. In the Actions box on the right, click the Stop Email Notifications link.
               Start a new discussion in Premiere Elements at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • The message "A problem has occurred trying to process your request. Please try again later. We apologise for any inconvenience this may have caused." is displyed when I try to log on to my internet banking. Please can you tell me why?

    Since upgrading to the latest version of Firefox, I'm now getting the message "A problem has occurred trying to process your request. Please try again later. We apologise for any inconvenience this may have caused." when I try to log onto my internet banking site. This occurs after going thru the first two steps of the login process. I don't get this problem when I login to all my other bookmarked sites, or when I use Internet Explorer. I'm using Windows XP. Any suggestions? (Note: I've just reloaded version 6 of Firefox, but it's not made any difference.)

    See here  >  http://support.apple.com/kb/HT1527
    From Here  >  http://support.apple.com/kb/TS1368
    More info here  >  http://www.apple.com/support/itunes/downloading/

  • Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?

    Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?

    Perhaps let's first try updating your Apple Software Update.
    Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
    If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

  • Issue with "timing" in Message output of Change PO

    Dear Experts,
    For change PO, We are facing issue with the Timing in message output of PO.
    i.e, For example when we create a PO - the timing in message output is "1"
    after executing ME9F, the message turns GREEN - and still the timing is 1.
    Change PO : NOW WHEN WE CHANGE A PO, a new entry of Message output appears in "YELLOW"
    Here is the issue - Now when we manually change the timing from "3" to "4", initially it appear's "4",
    but if u refer the below screenshot - once we save the application i turns back to 3.
    any idea - why this is happening.
    Thanks in advance.
    Regards,
    Rohit

    Hi,
    1st  make sure  which Dispatch time you want for your PO layout and restrict changing dispatch time manually in PO.
    Now use t.code:NACE, with application EF for your PO message type, Keep Dispatch time 4 in ‘Default values’ TAB  and select check of “CannotBeChanged” in Basis Data TAB and save.
    Maintain message condition record in t.code:MN04 with PO message type and keep Dispatch time 4.
    Now create PO , try to change Dispatch time  and see how system behave!
    Regards,
    Biju K

  • Problem with HP pavillion dv7 giving message (a problem with the internal fan enter = shutdown

    HP Pavillion DV7 notebook PC
    Windows 7 64
    intel I5
    6 gig memory
    service pack 1
    I am trying to identify a problem with my HP Pavillion dv7 laptop
    Several months ago it started getting hot and showing messages about problems with the internal fan and battery. It would say enter = shutdown and shut off. I suspected a bad battery so I checked it without it just plugging it in with the power cable. It seemed to work better so I assumed that was the problem.
    I ordered a new battery and it worked for a while. The problem came back and is getting worse. I can run it without the battery for a while but it gets got and shows the same message.
    I read on here that flashing and updating the bios worked for some but the latest update gives me an error IHISI not support BIOS then Insyde flash not supported.
    any help would be great this PC has a lot of info on it and I dont think it is a lost cause
    thanks

    Hi duddy, sorry to hear that you are having issues with your computer over heating.  I have found a document that will assist you with Restoring the BIOS.  http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02693833&lc=en&product=5199538&tmp...
    I have also found a document that will assist you with Troubleshooting and Overheating and Auto shutdown issue.    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03904182&lc=en&product=5199538&tmp...
    If you are still having issues, please let me know and I will be happy to offer more assistance..
    Thank you.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Macbook mini DVI to DVI output problems

    hi
    I've been using a samsung syncmaster 22" with my macbook for about a year now with no problems using the mini DVI to DVI connection
    then earlier this week i used a different DVI cable to plug my playstation 3 into the screen, when i plugged the computer DVI cable back into the screen lots of red/pink pixels have taken over the screen and when the desk is nudged red lines flash up
    i thought it might be either the DVI cable or the mini DVI to DVI adapter and replaced both to no avail, i have also tested all the cables on other screens/with other computers, and tested the screen with my playstation. Screen and cables all work fine so i think it must be some kind of output problem, but cant work out what it could be seeing as nothing would have happened to the port on the actual computer whilst changing connections on the samsung screen
    sorry for the long winded post, really wanna know what the problem is here

    Hi cbeth,
    welcome to macbook forum.
    For your friend macbook, try to press F7 back and forth to switch between mirror and expanded mode.
    Try to update your macbook hardware firmware and software using software updater and repair permission after that...application/utilities/disk utility/repair permission.
    Also reset your PRAM and PMU.
    Open your friend system preference / display and try to compare and set yours similar to hers, including resolution, color depth, refresh rate.
    Good Luck.

  • How to configure ME38 and Message Output

    topic:EDI in procurement - delivery forecast  (DELINS)
    ME38 - ERROR:Output LPH1 for partner  cannot be processed 
    How would I configure the same in ME38 and the resultant PrintOuts and EDI messages?
    I've had a look in SPRO, andthis is the standard step by step procedure for Message determination that I done in SPRO:
    SPRO > Material Management-> Purchasing -> Message -> Output Control->MESSAGE TYPE->Maintain
    Message Types for Forecast Delivery Schedule/Expediter ->OK
    109-LP->EL document
    SPRO > Material Management-> Purchasing -> Message -> Output Control-> Maintain Requirements for
    Message Control
    LPH1->109
    SPRO > Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message
    Type-> Define Partner Roles for Scheduling Agreement Release/Exped
    LPH1-6->OA
    WE20
    SPRO > Material Management-> Purchasing -> Message -> Output Control-> EDI->Set Up Partner Profile
    defined Partner LI, message DELINS
    SPRO > Material Management-> Purchasing -> scheduling agreements->set up stock transport sc.ag-> maint.REL.crea.profile for sc.agr.w rel.docu
    MN12
    LPH1-doc.Type-PurchORG-Vendor
    ME32L
    in Additional DATA      -> Scheduling Control (Firm zone=90&TradeOff-Zone=90
                   -> output control -> Plant-Profile
    ME38
    create schedules
    ME84
    run
    but in ME38 don't exist the message iDoc "LPH1"
    if I tried to create manually the system show the following message:ù
    OUTPUT LPH1 for partner cannot be processed
    message n.VN043
    Diagnosis                                                                  
        The proposed output cannot be processed. You can only display details.
    but I am not an MM configuration specialist (we don't have one at our company at present) and am therefore a little lost, any / all help appreciated.
    Best Regards
    Antonio Giovanniello

    Hi
    have you maintained the Partner Profile for the Partner role OA in the Outbound Parameters. Please maintain
    Thanks & Regards
    Kishore

  • Mac mini audio output problems

    This is similar to a problem that appeared before, but with a different twist.
    On 4 July all was well. On 5 July I switched on and there was no "chord" from the Mac. When I collected my mail - no sound from my speakers (which are part of my screen). Logged on to a couple of sites - no sound.
    The System Profiler, under the "Audio (Built In)" category, says: "No Built-in Audio." I know that's wrong because it's always worked before and when I plug my headset in it works fine.
    When I go to the Sound preferences panel in System Preferences, it finds the headset but if I unplug that it finds nothing.
    I tried running the hardware test (by putting in the OS X install disc and holding D during startup.) It couldn't find a problem.
    So, as far as I can see, audio output is fine for the USB headset output but not for the others. Is there a simple fix? The nearest Apple store is about 200 miles away and I don't fancy the idea of posting the Mac off.
    (And I think it's still under warranty for a couple more weeks.)
    Mac mini   Mac OS X (10.4.10)  

    hello mini users with the "no audio output" problem
    it seems that there are faulty output jacks in the macbook and the mac mini
    there are two things you can try:
    i tried everything and began thinking about what new software i had installed. it was "macam" which enables you to use older webcams on OSX. i needed that to use my webcam on skype.
    macam installs a file called "macam.component"
    if you have the same, do this - take that file out of:
    (your hard drive)/library/quicktime - macam.component
    and just put it on your desktop
    restart, then in your sound pref's choose your audio output (if doesn't work restart again)
    the first time i took it out, i had my sound back instantly, another time i had to choose audio output in sound prefs. you kind of have to try different things. after you get your sound back, you can put back "macam.component" to use your webcam.
    it seems macam causes the problem, the two can not work at the same time.
    the second thing: if you dont have "maccam" try plugging and unplugging output jack a few times and restarting until you have sound.
    the problem still could be with the OSX 10.4.10 update / quicktime...or maybe even a hardware problem like others with macbooks were saying (with the red light), not sure.
    people with macbooks and who have the red light on, say to use a paperclip to turn off the switch inside.
    my mini does not have a red light on. i tried using a paperclip but it doesnt work.
    hope this helps, beleive me i feel your pain!!!!
    what good is a computer without sound?
    extremely annoying problem that i hope apple looks into and fixes
    -andrew

  • Shortly after launching into itunes, it freezes and I get the following message: A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. How do I resolve this issue?

    Shortly after launching itunes, the program freezes and gives me the following message:A problem has caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. The program then closes, even if I have not completed what I am doing. How do I resolve this problem?

    That is what I thought. Cannot figure out how to turn it off, though.
    However, when I talked to her over the phone, she is definitely using Firefox. I tried to access her Internet Explorer, but it has been deactivated, I believe by Firefox.
    She primarily uses the Internet to communicate with her kids, grandkids, and great grandkids. Her e-mail account is with Yahoo Mail, and she uses Firefox to access it. Occasionally, she uses the web to look up information, and may have downloaded a virus.
    Do you think there's something in Yahoo Mail that conflicts with Firefox? Is there some remnant of Internet Explorer that needs to be deactivated? Could she have a virus?
    Any information would be gratefully appreciated. I live 7 hours away, and can only help her over the phone. I'm trying to develop a course of action that I can use with her. I know a little bit about Firefox, so need your expertise.

  • ITunes will not open, no message of problems

    iTunes does not show up whenever I click on it, and no message of problems comes onto the screen. Absolutely nothing at all happens. Help?

    See if QuickTime will open. iTunes uses QT codecs to play everything.
    Sometimes QT will give an error message, where iTunes won't.
    Also here is an article with lots more ideas to try:
    http://docs.info.apple.com/article.html?artnum=93976

Maybe you are looking for