PO not dropping off the work list

Hello All,
i have an issue where my user has the PO in his work list,
the PO is approved and the GR is also beeen done,
The user does not want to see the item in his work list.
can any 1 suggest how this can be done,
Thanks in advance.
points rewarded.

what transaction is the user using to see the worklist?
If it is a custom transaction or custom program then may be the logic of program needs to be changed to avoid all POs for which GR has been done.
Standard transactions for POs show all follow on documents existing for a PO. to get the desired result we can filter our results. But in your case I guess its a custom transaction / report.

Similar Messages

  • I have installed the font Broadway on my computer and it works in Microsoft Word but does not appear in the font list in InDesign.  How can I fix this problem?

    I have installed the font Broadway on my computer and it works in Microsoft Word but does not appear in the font list in InDesign.  How can I fix this problem?

    Start by rebooting the computer. If that doesn't work, search for adobefnt*.lst and delete all instances where * becomes a 2-digit number.

  • When I connect my guitar using apogee jam the note drops off after a few seconds. Why???

    When I connect my guitar using apogee jam the note drops off after a few seconds. Why???
    Its the same on most of the preset amps.
    Please help, the apogee cost me £80!

    Is it stopping recording after 8 seconds? Are you using Garage Band?
    If both of these are correct:
    This is actually a feature (i'm not sure why it defaults to this).  Instructions for the iPhone version are below:
    With the amp section open, touch the sproket on the upper right.
    You should be in a "settings" type area with three tabs.  Touch "Sections"
    Select the section and switch it to automatic - it will now record until you stop recording by touching the stop icon.

  • Machines 'dropping off' the render queue

    Hi guys,
         We have Windows 2008 server as our centralized storage.  All the render machines have the shared folders mapped correctly with all the permissions set.  We are using After Effects CS5.  What we are finding is that after a few comps have been rendered in a multi-comp project, some will drop off the render queue.  What happens is that the render window list disappears and the watch window pops up and keeps cycling as if it's 'lost' the project is supposed to render.  Usually, if we reboot or restart the render engine and go back to the watch folder, it "might" pick up the project and carry on rendering.  All the machines are on Windows 7 64-bit.
    Any suggestions?
    Jason

    This is a known state, but not directly AE's fault - one of your machines is not able to access footage items within a specific limit and this effectively also shuts down other machines because they, too, go into this waiting forever state. Ultimately it boils down to too many machines trying to access the same files or directories and clogging up your network. The only way to avoid it is to ramp up your network bandwidth or e.g. instead of working with compound movie clips, work with image sequences.
    Mylenium

  • HP Color LaserJet 1500L - drops off the 802.11n network

    My HP Color LaserJet 1500L drops off the network (it just stops printing). This happens when it is plugged into the usb bus of my new 802.11n base station or directly into the usb bus of a computer. The only way to fix it seems to be to plug it directly into a computer and unplug the usb plug and replug it, or to add the printer again. This problem has occurred in the past, but over time, and after various upgrades to the operating systems and hardware, etc, the situation tends to change. Before I installed the 802.11n base station the printer was staying in contact with my computers, but now it is misbehaving again. I doubt there is a real solution out there now, because it happened before and I never did discover a direct fix, but I thought the problem to be worth posting. This problem does not happen with my Canon PhotoPrinter iP6000S, which sticks to my network like glue whereever I plug it in (airport express, airport extreme, direct to computer, etc.) The HP loses contact with either of my computers in exactly the same way.
    Mac Pro Intel Core 2 Duo, and iMac Intel Core Duo   Mac OS X (10.4.8)   airport express, airport extreme 802.11n, cable modem
    iMac Intel Core Duo   Mac OS X (10.4.8)  

    To use the OS X standard network protocols (Windows/IP printing), you must have either a postscript printer (the driver in that case is just a ppd for the OS X postscript output) OR, a driver designed to work with CUPS (CUPS driver). HP doesn't provide CUPS drivers for OS X (who knows why, since they do for linux).
    You need to install foomatic and ESP ghostscript:
    http://www.linuxprinting.org/macosx/foomatic/
    then, install the foo2oak driver:
    http://www.linuxprinting.org/showprinter.cgi?recnum=HP-Color_LaserJet1500

  • Can't get off the watch list

    I can't seem to get off the watch list for this forum. Can somone at Sun help?
    Thanks,
    Tariq

    Hello,
    Yes, I agree it someimtes annoying.. If I forget to unsubscribe, I'll be reminded when I see next day "Recieving messages 1 of 370..."
    Have you tried going to "My Subscriptions", check-marking "GarageBand" category, and clicking "Delete". You may need to refresh the page to view the change you've made in "My Subscriptions" area.
    Recently, (I'm not sure if this is your issue or not) I'd been having a problem when I click on "Cancel Subscription to Category" inside the iPod category, which I sometimes subscribe to, it says "You are not logged in, you have read-only access".
    My solution to that was:
    Logout.
    Refresh the page.
    Login again.
    Refresh the webpage.
    Click on "Cancel Subscription to category".
    I believe that's what I do when that happens to me (it might be a variant of that, but along those lines).
    It's a laborious method I will say, but it does work.
    I hope this helps,
    -Kylene
    If any post helps or solves your issue, please mark it that way accordingly. Thank you for helping the boards!

  • Officejet 4620 drops off the network after the first operation

    HP 4620 drops off the network soon after one operation is performed. I have to turn it off and on again to bring it on line and then it repeats. The message is " unable to communicate with printer".  I have run all the diognostics and they say your printer is operating normally.  I have down loaded the latest drivers. Running Win 7 (64 bit). My only clue is that I have a new router, Netgear.

    Hi LennieZup
    I understand you can print over the network one time and then you have to turn the printer off and on again to continue to print.
    I will be happy to assist you with this.
    It may not be the printer, it may be your router's inability to wake the printer.
    Disconnect the power cable on the router for 10 seconds, then reconnect the power cable again. You might need to check to see how many devices can be setup on the router at the same time. Depending on each router.
    I would recommend updating the printers firmware. HP Officejet Firmware.
    I have included a document for Printer Does Not Maintain Wireless Connection. Try Step six: Assign your HP product a static IP address.
    If you need more assistance just let me know.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Urgent:SUS PO not appearing in the PO list for vendor's user

    Hi experts,
                       I am working on SUS. SRM5.0 single box scenario. PO is created by the purchaser and is successfully transfered through XI. But this PO is not appearing in the PO list of vendor's user. Please let me know what can be the possible reason.
    following roles are given to the user:-
    SAP_EC_SUS_ADMIN_PURCHASER
    SAP_EC_SUS_ADMIN_VENDOR
    SAP_EC_SUS_BIDDER
    SAP_EC_SUS_DISPATCHER
    SAP_EC_SUS_INVOICER
    SAP_EC_SUS_ORDER_PROCESSOR
    SAP_EC_SUS_SERVICE_AGENT
    SAP_BBP_STAL_BIDDER
    SAP_EC_BBP_BIDDER
    Also checked vendor data. Communication method is selected as XML.
    After creating PO and transfering it - message comes-
    Information  Processing BBP_PO_SEND_XML Is Started  
    Information  Action successfully completed 
    Please help. It is very urgent.
    Thanks and Regards
    Kapil

    Hi Kapil,
    do you have the same result when deleting all roles and only using role SAP_EC_SUS_ORDER_PROCESSOR?
    Are vendors successfully replicated into SRM and a user created via Web
    Txn "Manage Business Partners"?
    Did you maintain table BBP_MARKETP_INFO?
    Did you replicate the company code using Txn BBP_SUS_BP_ADM?
    In any case there is also an inital replication of vendors
    from MM to SUS via BD14 necessary.
    Thanks,
    Claudia

  • Several artists are not showing in the artist list on the Ipod.

    Ok. As the title implies on my Ipod there are several artists that are not showing in the artist list. However, in Itunes an artist is clearly defined. I even changed the artist name and still had no outcome. The album is there....but I have to sort through the artist list in order to listen to the music. Can someone help me figure this one out?

    The "missing" artists probably have their albums tagged as "Part of a Compilation" and you have the Compilation setting turned ON on your iPod. Either turn Compilations off (go to +Settings/Main Menu+ and +Settings/Music Menu+ and disable Compilation on both menus), or edit the tags to remove the Compilation option. Compilations are intended to be used for multi-artist albums, but often you'll get an album from a single artist tagged as a Compilation since the Gracenote database has an error in it.

  • Image dropping off the screen

    I am new to Photoshop (CC).  I have been using some tools successfully, but now when I try to use the Healing, Tool, Patch, Type and some others, the image drops off the screen as soon as I place the tool onto the screen. Then I cannot work on the image.  It just started today. Amy ideas???

    Usually any issue thats have to do with the displaying an image or any part of photoshop for that matter, is due to an out dated video driver. Try updating it and see if that fixes the issue.
    If the image is just too large to display, you can hold the ctrl key and the 0 on the numeric panel to zoom out to the full size of that image.

  • Restore from time machine does not list all my backups.  I know they exist but there dates are not present on the restore list.  Any help appreciated.

    Restore from time machine does not list all my backups.  I know they exist but their dates are not present on the restore list.  Any help appreciated.  If I must use one of these older dates to restore, how do I then get the more current data off time machine?

    Ok, so am i correct in saying that the steps to fix are as follows.
    That's one option, but not what I meant by restoring in the time-travel view. The latter is what you get when you enter Time Machine.
    is the fresh install not going to be able to "see" the time machine backups that I have at the moment.
    It should, but sometimes people report that it fails. I'm not sure why that happens.

  • HT201272 How do I get no longer in use devices off the active list if?

    I have lost an itouch and had a couple of computers go bad. How do I get them off the active list when I have no way to get their ID info? The computer I am using now is the only one I use.

    If you no longer have, or access to, the computer(s) you want to deauthorise,
    Log in to iTunes,  go to "view your account info" on the itunes store,  deauthorise all five, (Please Note: this can only be done Once every 12 months)  and then re-authorize your current Computer(s) one at a time.
    Authorise / Deauthorise About
    http://support.apple.com/kb/HT1420

  • TS3899 I have an iPhone 5 and it shows on the Mail Icon that I have over 3,000 emails to read but the number continues to increase even when I have read the email.  I thought  once you have read an email it drops off the count of "new emails"

    I have an iPhone 5 and it shows on the Mail Icon that I have over 3,000 emails to read but the number continues to increase even when I have read the email.  I thought  once you have read an email it drops off the count of "new emails"

    The received emails should show in two locations:
    1. In the All Inboxes tab of Mail.
    2. The Inbox for each mail account,
    If your emails are not showing in these locations try quitting the mail app and then reset your iPhone.
    Go to the Home screen and double click the Home button. That will reveal the row of recently used apps at the bottom of the screen. Tap and hold on the app in question until it wiggles and displays a minus sign. Tap the minus sign to actually quit the app. Then tap anywhere on the screen above that bottom row to return the screen to normal.
    To reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

  • Bookmark does not show in the bookmark list, but does in a search

    I bookmark a webpage. Then it does not show in the bookmark list. However when I do a search in the upper right corner of the bookmark window (not like google search), the webpage bookmark is found. I am using Safari 5.06 (just updated). same with 5.03.

    Good/fast work Jane, but what was it please?

  • C4780 does not print off the internet

    Since I upgraded to Windows 7 (64 bit HP laptop), the printer will not print off the internet. All other printing jobs work fine. I have uninstalled and reinstalled several times to no avail. I have also downloaded and installed the latest patch for computers that have upgraded to Windows 7. I have spent several hours with HP support both on the phone and online and they have been unable to solve this problem. Does anyone know what to do to fix this?

    Hi,
    are there any error messages displaying on the front panel display or on your PC screen?
    what are you trying to print i.e.. are you printing from your PC or are you trying to print using the ePrint service (print apps direct from the front panel or sending an email to your printers email address)
    If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
    If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
    I am an HP employee.

Maybe you are looking for