PO raised through Internal order for Asset Issue

Hi,
while Raising PO for Asset through Order I am facing the following Issue
G/L account 10700051 cannot be used (please correct)
Message no. ME045
Diagnosis
Comparison of the field selection strings from the G/L account 10700051 and the account assignment category F reveals that there is an incompatible combination of field selections for the field selection group 'Cost center'.
The G/L account field selection is stored in table T004F; that for the account assignment is stored in table T162K.
Procedure
Please enter a correct G/L account.
Solution I already tried
1. OKB9
2. OBYC: GBB-- VBR -- GL account
Waiting for helpful answer
Thanks
SAPUSER5

Hi
Go to OME9 - Account Assgn Catg F
Go to OBC4 and check the Field Status group of this GL account
The Field Cost center should be Optional or supressed in both... If one has Optional/required and one has suppressed - You get this error
br, Ajay M

Similar Messages

Down payment against the Internal Order - for Capital Expenditure

Dear friends
I am getting an error while making down payment against the purchase order.
The order of my entries or steps are as follows:
Created one internal order for Capital WIP with budget and availability control activation.
Created one purchase order against a vendor with reference to the above Internal Order.
When I am making the down payment to the vendor through tcode:F-48, the system throwing an error
"Define Cost Elements for Down Payments".
Can any one please explain why this error is coming. When I checked in Internal orders, there is a TCode: OKEP for Define Default Cost Elements for Down Payments.
System is asking for cost element, but where as what ever the down payment we are making is nothing but advance which is current asset. Why system is asking for cost element?
Can any one give me the guidance how to handle the issue.
Thanks in Advance
Kiran Kumar A

The reason is when you want the down payment for AUC to be capitalised, then you would need to create cost element for Downpayments.
Normally as per design of SAP, down payment being a Balance Sheet Account (Current Asset as you rightly mentioned) doesnot need / accept an Cost object, as a special case since down payments for AUC needs to be capitalised and hence need to be carried to Controlling (Internal Order) by creating Cost Element for Downpayments.
Go ahead and create the cost element. That would resolve your issue.

Internal Order FOR AUC

Hi,
I want to make an internal order to collect cost during the construction of AUC and settle it to the final asset number. However during my first posting of AUC cost, i want the system to create the AUC asset number automatically. How can i do that?

Hi,
you will have to Implement Investment management through Internal orders.
make the relevant order type, settlement profile & asset class relevant for investment management. Enter the investment profile in investment tab of IO which will automaticall create the CWIP asset.
Saurabh

Internal order for AUC with cost center - 'Please Select proper plant code'

Hi All,
User is getting error 'Please Select proper plant code', while inserting 'cost center' in field 'Responsible CCtr' for new Internal order which is for AUC.
In Devlopment server also when we try to create asset through internal order we get same error.
For your information this is new Plant, profit center and cost center for which we are trying to create internal order for AUC.
If we try to post without Cost centre entry is saved. But we want to add cost center.
Please help to resolve.

Hi,
If it is a custom message then please check whether any Validation or USer exit is maintained for the IO master data. If yes, then update the cost centre accordingly.
Regards
Sreekanth

How to block entry through internal order budget in F-02

Hi,
Kindly tell me during Purchase order creation through internal order (Order related PO) whreas budget is maintained against that internal order if the PO amount is exceede than budgeted amount it gives warning / error messge that budget is exceeded. Same internal order or any other internal order which has budget against that internal order if I go to F-02 tcode and pass entry with cost center and internal order(budget is given) both it does not give any warning message if budget value exceeded i.e, F-02 posted amount is greater than budgetd amount. It goes to next screen which should not do. Kindly tell me the reason why it is not being blocked and goes to next screen or if there is any configuration please guide me.
Best Regards,
Samrat
Edited by: Samrat Roy on Nov 2, 2010 11:43 AM

Hi Eli,
Now I have observed during saving the record in F-02 it gives warning message as per tolerance limit set in config area. Actually I want in F-02 screen when you put Document date, posting date, type, period, company code, currency, posting key(debit), GL account, next 2nd screen you mention amount, cost center, internal order(budget is maintained), posting key(credit) and press enter for next 3rd screen to put credit amount. While you go from 2nd screen to 3rd screen then warning / error message should give if amount is exceeded than budgeted amount which I am getting during saving. Is it possible to make any check between two screens ????
Beside I would ask you here tolerance limit is set as 95%, 100% and 102%. During PO creation through internal order it gives error message when amount is exceeded than 102% as budget is exceeded. If the amount is between 95% to 99% it does not give warning message which should do. But from posting in F-02 screen it gives proper messge in all levels since 95 % to 99% and 101% to 102%.
Regards,
Samrat

Default internal order for each vendor

Hi
I am creating employee as a vendor in FK01. Each vendor is created as internal order for doing employeewise budget check. So when i book any expenses for vendor, i want that internal order should automatically flow on the basis of vendor.
So is there any way from where i can default internal order on the basis of vendor.
Edited by: Deepak Agrawal on Jun 9, 2011 5:05 PM

Hi
The only way to do the same is through Substitution rule by using an user exit. You need to create a Z table and maintain the mapping of vendor to IO. There after in GGB1, write a substitution rule for the node, complete document
Check if Vendor Account =X
Substitute using user exit
In the user exit call up the z table.
Regards
Sanil Bhandari

Using internal order for a gl in FBCJ Screen

Hi All,
I would ike to use internal order for GLs/Vendor accounts like employee vendors or MM vendors in the Cash Journal i.e. FBCJ Screen.Hos should I do it.
Simillarly I would like to give the work order /po reference for such advances in the FBCJ Screen.Is it possible to do it?
Thanks in advance for your replies.
Regards,
Manoj mehta

Hi Manoj,
It is possible to use Internal Order for GLs/Vendor accounts like employee vendors or MM vendors in the Cash Journal i.e. FBCJ Screen. The internal order field maybe invisble on the screen.Follow the following steps:
1. Click on the Configuration tab - Blue, Yellow, White Striped Square on the right top corner of FBCJ Screen.
2. It will open the Table Setting Tab, Click on Administrator.
3. It will open Edit System Settings, Check whether the in the cloumn, order is having tick in the Invisible Column. If it is ticked remove the tick & click on Activate.
4. Close the Edit System Settings & Save the Table Settings.
Thank You.

Internal order for DC

Hi,
We want to create an internal order for a project we are going to start in one of the Distribution centers. Since the DC is not associated with a plant, can we create an internal order exclusively for the DC? I created a new order type and in the field selection I hide Plant and set the location field required. However, when I was creating a new Internal order it says location/plant. If internal order can be created only for plant then how can we track the activities of the work done in a DC? Please share your ideas.
Thanks

Hi
The Location field used by you seems to be related to a Location in a Plant and hence the dependency of the Plant.
You can hide this Location field and use some other Text field for Keying in values pertaining to Location ( As per your requirement).
Harsh

Internal Order for prepaid events

While posting internal order for prepaid events, the system is forcing to enter Investment Profile. That should be the case if it is an investment measure ut this internal order is for recording short term events that get prepaid. How to make this field "Investment Profile" under Investment tab optional from required.

Is it at the time of creation of Internal order master data or at the time of posting entries to the Internal Order?
Can you explain in detail?

Purch.Order for Assets - Urgent

Hii all of u
Can any one plss explain me how to do Purchase orders for Assets and the required configuration if any...
Plsss help me it is very urgent to me..
I will assign full points
Thanks & Regards
Ramki

Hai,
while creating purchase order, you should assian Account assainment category (A).
In Line item level , in Account assainment category we have to give Asset no and Gl a/c.
ok
Regards
ram

Specific Internal Orders for general ledger code (expense)

Hi
at the time of data entry, users enters ill logical internal orders , can we restrict them or provide them any list or object so that they can select specific internal orders for that general ledger.
it will force them to use that internal orders only.
is there any standard provision to control this situation ???
regds
sanju

When we got the same requirement, it was implemented via checking a specific internal table in a CO validation rule. (OKC7)
Regards,
Raymond

Internal order for claims

Hi
Can anybody explain like what can be pupose of creating an "internal order for claim" for projects.(The settlement rule is for WBS element.
Help wud be appreciated.

AUSP table holds the value and CABN table holds the field.

Internal Order for AUC Asset not getting created Automatically

As per SAP Standard , when I create an AUC Internal Order (KO01), and save , AUC asset is gets created automatically ted via AS01 and stores the AUC Asset in Internal Order settlement rule.
However when tried with the client Im not able to create, AUC is not getting automatically created and stored in Int Order Settlement rule.
In config I have added investment profile to Ord Type and in OAOA ( AUC Asset class setting , Investment profile is also checked)
Kindly let me have your inputs to fix the issue
Advance Thanks
Sanjai

Hi,
In order to create AUC asset automatically by the system, you need to create an investment profile in OITA.
Then assign this investment profile in the Internal order master data created through KO01 in the Investments tab.
There is no option of assigning the Investment profile in the Order type.
And in OAOA that is Asset class, select the radio button investment measure.
You can default the Asset class of AUC in the investment profile or leave it blank so that same can be filled when system prompts for AUC creation.
You cant see the AUC asset in the settlement rule once Investment order is created, but only after settlement of the balances to the AUC u can see.
Thanks & Regards,
Ravi Kumar

Budgeting through Internal Order - Issues in Purchase Requisition

Hi All,
I have posted the issue in ERP Matyerial Management Forum also, but since this has a lot to do with CO-Internal Order, so posting the same here.
Objective: We want to activate Commitment Update and budgeting for Capital purchases thrugh Internal Order. Budgeting is done for IO.
For the budgeting to get activated in Purchase requisition, Internal Order tagged to the Asset should be present/seen in the PR.
For PR with Account assignment Cat as 'A', I am not able to see the Internal order (mapped to the asset) in PR. The field 'Internal Order' in PR is coming BLANK despite the fact that the Asset used in the PR has been tagged to a valid Internal Order (of the Object Class - Investment, with Commitment update activated).
What other setting is missing?
Pls note the following:
1) Account assignment cat 'A' has been set to DISPLAY CO/PP order ( T code - OME9)
Issue is that this field in the PR is NOT getting populated at all.
2) Commitment management, Availability Control have also been activated in the system
. Internal Order status management has also been checked.
Any help in this respect will be highly appreciated
Thanks
Gayathri

Hi Gayatri,
when you are saying"budgeting for Capital purchases thrugh Internal Order",how do you use account assignment category "A"?
if your requirement is budgeting for capital purchases through IO then you should use account assignment category in respective PR.Automatically it will control budget/commitment wrt those internal orders.
Hope this helps you.
Ashok

Asset under Construction through Internal order- Functional deficit?

Hi Experts,
I have created an internal order and all the expenses incurred for the asst under construction are being booked at this internal order.
While settling the internal order the system always picks up the month end date as the settlement date and hence the balance of internal Order is getting transferred to AUC on month end date (say31.07.2007).
So,
The date of transfer of balance from internal order to AUC is month end date that is 31.07.2007.
But in Actuality the AUC got complited before month end (say 15..07.2007) and the Asset was put to use on 15.07.2007.
Now the system is not allowing to settle the AUC to Main Asset as on 15.07.2007 as the AUC was not existence on that date. <b>Error:</b> Posting not possible (Value date earlier than capitalization date).
I am able to transfer the balance in AUC to Main Assets as on 31.07.2007 but in this case my client is loosing the depreciation element on this asset from 15.07.2007 to 30.07.2007. Is this the functional deficit in SAP? Is there any way through which depreciation can be availed from 15.07.2007?
Thanks & Regards,
Bijay kumar Deo

You can settle the AUC value in one period and posting can be made in another period. in the same you can give the different asset value date in KO88 screen. The only limitation is this possible only if the fiscal year is same.
Give the asset value date as 15.07.2007 in KO88
Hope this will work
Radha

PO raised through Internal order for Asset Issue

Similar Messages

Maybe you are looking for