PO Release error table T16FS

Hi folks!!
I have created a release strategy as below
Release Group 01
Release strategy 10, 11, 12
Classfifcation data is also maintained.
When I run t Code CL20N to assign object to class, after filling out fields release group, release strategy and class type, when i enter, i am getting error "entry 10 does not exist in T16FS...Message no. 00058. While in T16FS release strategy 10 exits.
Please guide me how to resolve this issue.
Best regards,

Hi
Refer SAP note 86900 to transport the release strategies from one client to another.
Characteristics and Classes data are not transportable and must be moved to the target system/client using ALE / idocs.
NOTE: it is very important to move class and characteristics config in the correct sequence.
Step 1: Move Characteristics to the target system/client (ALE). Transaction BD91
Step 2: Move Classes to the target system/client (ALE). Transaction BD92
Step 3: Check config & classification data in target system/client
Hope it helps
Thanks/Karthik

Similar Messages

Release strategy: Tx CL20N Error: Entry 01 does not exist in table T16FS

Dear MM Gurus,
I was designing new release strategy for PR and PO, so I deleted all the previous entries(SPRO) available in SAP. I created my new entries but in the transaction CL20N I got the above mentioned error: "Entry 01 does not exist in table T16FS-Check your entry" . I checked the table T16FS, where the entries were available. It also showed the previous entries I deleted from SPRO.
Refering the SAP note 365604 (version 29, valid from 08.10.2008), I created the deleted entries again so that I could delete them in the required sequence
1. release strategies
2. release indicators
3. release codes
4. release groups
5. class
After deleting the entries in the above mentioned sequence also I am getting the same error in CL20N.
I ran report RCCLZUOB, it shows the entries does not exist.
Please help.
Edited by: Akshay Kurhe on Mar 2, 2009 6:02 AM

hi
check this setting
Distribution Using Object Classes -->Maintain Class Types & Maintain Classes

Release strategy tables

Please tell me the tables used for release strategy of PR, PO, service PR, sercice PO, RFQ, contract, and delivery schedules.
Is there a method of finding out the table by some methodology. It is not possible to remember all the tables.
In case of PR item level release is required. Give some guidelines as to how to activate item level guidlines. it is possible both with and without classification.
Regards

HI,
Release strategy tables
Release strategy without classification
T161I as described above.
T161E Release code and Description
T161S Release indicator
T161G Assignment to release indicator
T161F Prerequisites
Release strategy with classification
T16FG, T16FS as described above.
T16FH description of the release group
T16FT description of the release strategy
T16FC Release code
T16FD Description of the release code
T16FV Prerequisites and actions
T16FK Assignment to release indicator
T16FB (purchasing documents), T161S(Purchase requisitions), T16FL(Service Entry sheet) is the release indicator
T161U(requisition), T16FE(purchasing document), T16FM(service entry sheet) are the descriptions of the release indicator
Other tables are
EKBE History per Purchasing Document
EKBZ History per Purchasing Document: Delivery Costs
EKKN Account Assignment in Purchasing Document
EKPA Partner Roles in Purchasing
EKPB "Material Provided" Item in Purchasing Document
EKPV Shipping Data For Stock Transfer of Purchasing Document Item
EKRS ERS Procedure: Goods (Merchandise) Movements to be Invoiced
EKUB Index for Stock Transport Orders for Material
EBAN table has fields for release status and indicator.
To See the tables
goto Transaction SE11, in the field Table click F4, Click on Information system
In the applciation Compnnets enter the following & execute
MM* Materials Management
MM-CBP* Consumption-Based Planning
MM-PUR* Purchasing
MM-SRV* External Services
MM-IM* Inventory Management
MM-IV* Invoice Verification
MM-IS* Information System
MM-EDI* Electronic Data Inter
MM-FT* Foreign trade
OR
goto SE16 Click F4, You have two options Information system & Sap Applications.
Click on SAP Applications & selec the application you wnat to see, for E.g Purchasing you can click on materials managemnt, Purchasing if you drill down you will see the list of tables....
http://help.sap.com/saphelp_47x200/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm
Check release stratergy with and w/o classification
Thanks & Regards,
Kiran

Local client copy error - Table "BKPF" not edited due to excessive number

Hi,
I am performing a local client copy on our ECC 6.0 system. Client copy took more than 12 hours and its still in progress with 7 tables still to be copied. Logs in SCC3 -
===
2 ETA163 Table "BKPF" not edited due to excessive number of errors
2 ETA057 WARNING: Cancelled several times
2 ETA163 Table "COEP" not edited due to excessive number of errors
3 ETA311 Process "00002" started on server "sfrndevsap15"
(time: "17:20:51")
2 ETA297 Error: Table "ONROV" error in DDIC - Check table with SE14
2 ETA057 WARNING: Cancelled several times
2 ETA163 Table "FAGLFLEXA" not edited due to excessive number of errors
3 ETA311 Process "00003" started on server "sfrndevsap15"
(time: "17:20:52")
4 ETA346 "FAGLFLEXC :"" 0 0 0 DEL.""
0 0 17:20:52"
2 ETA057 WARNING: Cancelled several times
2 ETA163 Table "HRP1001" not edited due to excessive number of errors
3 ETA311 Process "00004" started on server "sfrndevsap15"
(time: "17:20:52")
4 ETA346 "VSAFVU_CN :"" 0 86123 0 DEL.""
0 29 17:21:21"
2 ETA057 WARNING: Cancelled several times
2 ETA163 Table "PCL4" not edited due to excessive number of errors
===
Please help ASAP, as this is effecting our testing team. I have tried to copy individual tables also using a transport request number and SCC1 to copy it to the target client. This is also taking quite a long time.
Thanks in advance,
Abdul

Hi Abdul,
What does your system log say ?
Check this SAP Note
Note 579783 - CC ERROR: Loss of data - table not copied
run the report RSCC_VERIFY to check if the table is consistent within the source client.
SAP will only provide support for RSCC_VERIFY messages if there is a specific problem in an application in the target client that can be assigned immediately to the messages.
RSCC_VERIFY is delivered with SAPKB46B49, SAPKB46C35 and SAPKB46D24. In older releases, you can create the report in the ABAP editor (transaction SE38) in accordance with the attached advance correction. Use the development class or the STRM package for this.
Regards,
Siddhesh

PR release startegy tables.

Dear All,
I am developing PR release print out with the help of abaper .
Now i want to know all the tables which stores PR Release strategy's rel code, rel status and most imp date of which it has been released.
Please help.
Shreya

Hello,
check following tables
CEBAN - Purchase Requisition communication structure
Commonly used fields u2013
BSART     Purchase requisition document type
ESTKZ     Creation indicator (purchase requisition/schedule lines)
EKGRP     Purchasing group
AFNAM     Name of requisitioner/requester
MATNR     Material Number
WERKS     Plant
LGORT     Storage location
BEDNR     Requirement Tracking Number
MATKL     Material group
GSWRT     Total Item Value
The fields from EKKO that are related to PO release strategy
FRGGR
FRGSX
FRGKE
FRGZU
Check the tables for the release codes
T16FG
T16FS
T16FB
Also check EBAN,EBKN
Regards,
Shailesh

Erro "validadation error: Table (IT_NFE_IMP)

Boa noite
Atualizamos o SP do GRC para o 15 e estamos em fase de testes. Não podemos atualizar para o 16, pois o go-live está marcado para domingo 14/11. Ainda não estamos trabalhando na versão 2.0... estamos realizando os testes para a versão 1.0
Ocorre que depois da atualização do SP e aplicação das notas referentes ao SP16 do GRC estamos tendo a mensagem de erro "validadation error: Table (IT_NFE_IMP)". O interessante é que estamosem contato com outros usuários SAP que fizeram o mesmo esquema que o nosso e não tiveram nenhum problema de validação durante os teses. Detalhe: temos uma BADI no GRC também ativada.
Alguém tem uma idéia do que pode ser??
Obs.: se eu tenho um erro de CEP para um fornecedor de importação o erro dá na mesma tabela, mas informa que é o formato do campo.
Desde já agradeço a ajuda.
Grata,
Denise

Bom dia Denise,
Mesmo que ainda não esteja trabalhando com o layout 2.0 recomendo que implemente as notas do SP16 no seu sistema.
Este erro que está enfrentando é corrigido pela SAP Note 1520853.
Veja histórico completo aqui : Problema de validação... Validation error: Table (IT_NFE_IMP) Missing entry
Atenciosamente, Fernando Da Ró

ERROR TABLE INCLUSION

Hi,
I am using error table to capture the records that failed to load into the target table.
I have specified the data rules and the rule action is move to error for all the rules. Its row based generation and while executing the mapping, the error records are not getting into the error table and mapping stops when it reaches the maximum limit.
Where is the problem ? I couldnt figure out. Can anyone help ???
Thanks and Regards
Ela

OWB client version 10.2.0.1.31 and repository 10.2.0.1.0.
DB is Oracle 10g.
I specified the data rules in the object editor for the table and then specified the shadow table name. Then I dropped and recreated the table which resulted in the error table creation.

DML error table intermittently fails to generate error handling in package

Hi!
In OWB 11gR2 (11.2.0.1), we're seeing an issue when setting the DML Error table name on a target table. Sometimes, mostly on older and complex mappings, the error handling logic does not get generated when we deploy the mapping, and nothing is populated in the error tables for error conditions, though the errors display as warnings in the OWB UI.
When I create a new mapping that is very simple - one table loading another - setting the DML Error table name always results in errors being put in the error table. That's great, but that doesn't help us with our more-complex mappings that aren't logging errors.
We can't determine the cause of the issue. I can't see a difference in the configuration of the mappings that work and don't work. Generation Mode is All Operating Modes. Default Operating Mode is Set based fail over to row based. We've generated the error table using DBMS_ERRLOG.CREATE_ERROR_LOG. The target tables do not have primary keys.
I've tried synchronizing the target table operator in the mapping as another forum thread suggested. No change.
Has anyone else seen this issue or know of a workaround?
Thanks,
Jayce

Which logic did you talk about ?
For the version 10, you will find the error table more on the insert statement such as:
INSERT INTO "TSALES"
("PROD_ID",
"SALES"."AMOUNT_SOLD" "AMOUNT_SOLD"
FROM
"SALES" "SALES"
LOG ERRORS INTO TSALES_ERR (get_audit_detail_id) REJECT LIMIT 50;Come from here:
http://blogs.oracle.com/warehousebuilder/2007/08/set_based_errors_dml_error_log.html
Then check the insert SQL generated.
Cheers
Nico

Find error table created using DBMS_ERRLOG

Hello,
I am working on Oracle 10.2.0.5 and have a requirement to log the Error records without allowing the Load process to fail. In order to achieve this, I have decided to use the DBMS_ERRLOG functionality provided.
However, there is a catch. The application has approx. 100+ database tables, which are loaded with data received in flat files, and many of them have length nearning 30 characters.
Now, DBMS_ERRLOG, will automatically create an error table corresponding to database table, but will only consider first 25 characters. And since, many tables have similar names differing only towards the end. Hence, my question is, Is there any data dictionary view which might store the underlying database table name?
I am aware of two options to achieve this:
1. Maintain a document to reference each Error table to its database table. This being a manual approach, I am trying to avoid it.
2. Use the USER_TAB_COMMENTS, which will store the table name in comment. Although I have seen this happening, but do not see this as sure-shot approach, since I do not remember reading this anywhere in documentation.
Can anybody suggest a better approach to manage the situation?

padders answer is a good one. I do not see the problem since you can create the error log tables with names of your choosing in any schema you want. Don't let oracle name the tables. Use SQL to create the PL/SQL for all your tables based on a tag you put in the table comments or based on another table with the table names to be logged.
DBMS_ERRLOG.create_error_log
    dml_table_name      => 'real_schema.my_thirty_character_table_name',
    err_log_table_name => 'my_thirty_character_table_name',
    err_log_table_owner => 'error_schema',
    skip_unsupported    => TRUE
Table_Name
Error_Table_Name
Error_SchemaHeader
my_thirty_character_table_name
my_thirty_character_table_name
error_schema
my_short_name
my_short_name_err_log
support
With so many tables I would write a generator to create all the error log tables and the DML (insert, update or merge statements) with error logging for all the tables based on the above table and maybe put the DML in an API package that can be called from your app.

Usage of Error Table in OWB mapping

WE uses ERROR tables to take care of defective items in a maping. We want the rows in the error-table to remain and acumulate for each loading. That is, we do not want to truncate between running the mapping. We have:
Truncate table error = NO
Roll-up errors = NO
But the table is truncated between each load anyway.
Does anyone have any experience of how to make the table not to truncated?
We are using OWB 11.2.0.1
/John

Hi John
This looks to be fixed in the 11.2.0.2 OWB patch.
The bug is 9661088, otherwise you'd have to move/process the errors before re-run.
Cheers
David

How to use error table in mapping level?

Hi all
Any one please tell me how to use error table in mapping level or how to handle the errors in mapping.
I am creating one error table in oracle but i dont know how to use it in mapping.
Thanks in advance.
Kumar

Hi Kumar,
You need to use Error Table along with the Data Rule .
Error tables are used with Logical error handlers (Data Rules). Detailed description on using data rules is explained in the following document
http://www.oracle.com/technology/products/warehouse/pdf/OWB10gR2_ETLandBusinessRules.pdf
In a nut shell usage of error tables is as follows.
1. Create a data rule associate it with a table (Target table or table in which you load data).
2. Use the table in a mapping as target table.
3. Deploy the table and mapping.
Now in the target schema one more table will be created with the name <target table name>_ERR. When a mapping is executed the data which violates the data rule gets into this error table.
The following has to be done to have error table name of customers choice.
1. Right click on the table and click configure.
2. Give the table name in "shadow table name" section.
3. Deploy the table.
4. Use this table in a mapping. Now in the mapping on this table properties in "Error Table Name" section the name of the table specified in "shadow table name" will be populated.
Thanks,
Sutirtha

How to capture Field validation errors in the Error table in ODI 11g

Hello,
We are using ODI 11g (11.1.1.5) and the scenario is to read the data from a flat file (.txt) and do a bulk insert into MS SQL Server database table.
We need to capture the error records (if the source field size is greater than the target column size) into the error table. However the interface errors out at step "Loading - SrcSet0 - Load data (BULK INSERT)" with error message "SQLServer JDBC Driver][SQLServer]Bulk load data conversion error (truncation) for row 33, column 6" but these errors are not being inserted into the error table.
Is there a way to capture these errors in the error table? Below is the KM details.
LKM: LKM File to MSSQL (BULK)
CKM: CKM SQL
IKM: IKM MSSQL Incremental Update
FLOW_CONTROL is set to true for the IKM.
Thanks,
Krishna

Hello,
I had the same problem with ODI when I was trying BULK INSERT of the txt file into MS SQL. Check the cell(s) in your source file (txt) - it looks like the value in hte cell has hiding symbols: when pressing F2 tryng edit the value in the cell the coursor appared far to the right from the right end of the value. So, try to use backspace to delete the hiding symbols and verify the above. If avasrything is OK, then modify your txt file. Let me know if it works.
BTW , I've created procedure inside the MS SQL 2008R2, which BULK INSERTed records into temporary (#...) table and immediatelly, without any verification all the records were inserted into the final table in the DWH here is the statement:
if object_id('TEMPDB..#<table>','U') is not null drop table #<table>
CREATE TABLE [dbo].[#<table>]
[1] [varchar] (50) NULL,
[2] [varchar] (100) NULL,
[3] [varchar] (100) NULL,
[4] [varchar] (100) NULL,
[5] [varchar] (100) NULL,
[6] [varchar] (100) NULL,
[7] [varchar] (100) NULL,
[8] [varchar] (100) NULL,
[9] [varchar] (100) NULL,
[10] [varchar] (100) NULL,
[11] [varchar] (100) NULL
) ON [PRIMARY]
bulk INSERT #<table> FROM 'N:\<table>.txt'
with
(FIRSTROW=2,KEEPNULLS,CODEPAGE=1252,FIELDTERMINATOR='\t'
INSERT
INTO <table>
SELECT
* FROM #<table>
and it works! Let me also know if you find any other way around.
regards
Anatoli

Does "Target table" and "Error Table" need to be in same DB as OWB's?

We get the following error ORA-00600: internal error code, arguments: [opixrb-3], [1036], ORA-01036: illegal variable name/number at the time of OWB execution
OWB seems to successfully log the errors rows in the error table when a) target table and it’s b) error table are in the same database as OWB’s but throws ORA-01036 error when they are in a remote database from OWB's
Any one has any information about this please...? It will be of great help
Edited by: ghiyer on Jul 20, 2009 8:42 AM

Oracle has come back to us saying that
"DML error logging feature is not supported for distributed DML."
Bug 5698887 has more information about this.

Viewing form in Preview Mode Failed. Error: Table not found [131-183]

Hi,
I have created a user form in screen painter in SBODemo. Created UDT, UDF & Registered UDO through my SDK code.
Everything works fine.
But when i run my addon on any other DB, and open my custom form it gives an error : Table Not Found.
I have checked the UDT's , UDF's & my UDO, all are in place and getting created in the DB.
I tried checking the Form again in screen painter everything is in line. But when i try preview in screen painter it gives an error
Viewing form in Preview Mode Failed. Error: Table not found [131-183].
I can't figure out the issue, i have checked my codes & forms many times.
Regards
John

hi john smith,
Check your screen painter, probably some fields are defined without the "@" character in front.
for fields, check the "U_".
nd.Q

Error Table not found ODBC -2004 [melding 131-183] when opening "Open documents"

Hello, we get an error on opening the screen "Open Documents" in SAP B1 9.00
It says : Error Table ................ not found ODBC -2004 [melding 131-183]
Everytime a different table gets mentioned: OAIB - OWHT - WLS1 - CSHS.
Last time when we created a new userprofile it was gone, but now after twoo weeks this error is back.
Does anyone know how we can create a solid solution ?
Thanks in advance - Jos Dielemans

Hi,
It is an application error. Please check SAP note:
2008925 - You cannot run the Open Item List report for Purchase Requests
Thanks & Regards,
Nagarajan

PO Release error table T16FS

Similar Messages

Maybe you are looking for