Podcast Audio Bug

When playing podcasts the sound cuts out after system notifications and locking and unlocking. It's exactly like the audio bug I experienced on my first gen phone after an OS upgrade. I'm not sure if this is new since upgrading to 4.0.1 It only happens with podcasts, other MP3s don't have the problem. Can anyone else replicate this?

Christian Gloddy wrote:
MP3s and other media files can vary widely in the kind of metadata they carry and Apple certainly accounts for that in their software. The fact that I stumbled on a scenario that AppleTV trips over but all of it's other products do not, I would think it would be something I would think Apple would be interested in fixing, instead of saying that it's not their problem. I would assume Apple would want the same level of quality with AppleTV that it has with iTunes, iPod and the iPhone.
in which case, this is not the place to report "bugs" to apple.. this is a user-to-user support forum (no apple input).
if you want to report your "bug" then you need to do it via the official channel - http://www.apple.com/feedback/appletv.html
ps. i don't need a lesson on metadata. however the metadata is set by the podcast producer.

Similar Messages

  • Re-Conforming and Audio Bug nightmares

    Hi,
    First, let me say that I've searched throughly about those problems before I came in here.
    I own a company and we used to use FCP7 to edit our weekly show.
    I've moved all suites to Premiere CC 7.2.1
    Our workflow is a bit different than before, since PP can handle original files, in our case .mts sony AVCHD FullHD from FS700, NX70 a Handycam and the MP4 from GoPro Hero3.
    Our main problems right now have been:
    Re-Conforming:
    I've searched about this and these are the possibles solutions
    - Turn the creation of XMP off
    - Disable XMP metadata linking
    - Direct the cache and database files to the same external harddisk that our media is in
    - Direct the scratch disk to the same Harddisk as the media.
    - Media been on a Network volume and Computer clock / daylight saving time shifting.
    - Before opening a project in a different machine, make sure to redirect (to find) the cache to the disk your using
    I must say everything above was tested and dealt with but still. We have seen projects re-conforming by it self everytime we open PP. It normaly happens when moving from computer to another one. But sometimes happens on the same machine, between two days apart, with nothing different.
    And the re-conforming takes a lot of time.
    Audio Bugs:
    Sometimes the waveform doesn't show up. Now this has a workaround, just go to clip > audio options > re-render audio. But it's annoying.
    And more serious sometimes we got an audio looping 1sec over and over, even though the original is perfect, trying to re-render doesn't help. re-importing the clip doesn't help. Only deleting ALL the preview files (because you can't know which is which) that works.
    Is there anyone with solutions (definitive) for these problems?
    Regards

    Hi Jim,
    As I said, I'm using external USB 3.0 drives. No Network drives whatsoever.
    All these:
    System
    Projects
    Cache/Scratch
    Media
    Exports
    Are in the USB 3.0 Harddisk.
    If you are refering to the same drive as the OS that's not a solution as in some machines I have 160GB SSD.
    Cheers,

  • Audio bug with WAV files: use mp3, not wav for syncing long audio files

    Just a tip:
    I've noticed another audio bug in Presenter (including 7.05) but there is a workaround. I often export the audio as a single, long clip from pre-recorded lecture videos, and sync it with the powerpoint slides in Presenter. I've found it easiest to import the long audio file into the first slide, then sync using the Edit Audio window. I find that much easier to use than the Sync audio window.
    However, If you use WAV format for the imported audio file, sometimes Presenter will simply refuse to play back anything beyond about 5 minutes into the timeline in the Edit Audio window. Nothing fixes it - restarting, re-importing, etc. However the problem goes away if you save the audio as mp3.
    Ellen
    http://thedesignspace.net

    Why did you post this in the LiveType forum?
    I would recommending posting your question in the Final Cut Pro forum.
    Have you tried trashing your preferences?
    Anyways... here is a thread with a similar problem:
    http://discussions.apple.com/thread.jspa?threadID=656515

  • CS4 PPro Audio Bug???

    This has to be an audio bug, right?
    There is a "main" sequence consisting of 14 nested sequences. Each of the 14 nested sequences are a "target" sequence (Adobe help terminology) made by nesting a multi-camera sequence and going through the cut process.
    When these 14 targets are made, the audio works.
    Now, back into the main sequence, two of the 14 have no audio. Render Work Area and Render Audio do not help.
    I went to the target sequence and its audio was now gone. So I tediously rebuilt the sequence and the target audio was now present. Went to the Main sequence and the audio was present.
    But then I performed a Render Audio on the main, and immediately upon completion, the audio was gone!!!! Just for sequences 1 and 2 (the audio is still functional with the other 12 sequences).
    I repeated the entire tedious experiment, and it happened a second time!!!
    I compared the Sequence Settings of the working sequences and the non-working sequences, they appear to be identical.
    (Vista 64-bit, quad, 12GB, blah, blah, blah).

    What kind of media, what sequence settings?

  • Podcast Playback bug...

    I'm using black iPhone 4s 32 gig.  When I'm listening to a podcast, I typcially will listen at 2x speed.  (I'm wearing the apple earbuds.)  Everything is great until a phone call comes in.  The audio fades down and then I hear the ringer.  I take the call.  When I hang up, the podcast starts up again - but this time at 1X speed.  When I go to the "Now Playing" screen, I see that the 2X speed indicator is still on.  I have to tap through to 1/2, then 1, then back to 2x to get the audio to speed back up.  Seems like a bug in the software.  This is my first iPhone, so I can't say if this is a 4S issue or and IOS5 issue.  Maybe others can try it out and see if the same thing hapens to you.
    Thanks for your help,
    Greg

    I am not familiar with that but here's a link to the support pages, if no users respond here.
    http://www.apple.com/support/contact/

  • Podcast audio not showing up on site or iTunes

    I've been searching for the answer to this for hours now. I can create a podcast via GarageBand, sent it to iWeb, and publish my site, but when I go to the page that has the blog entry for the Podcast, I can't see/hear the audio! I see the picture that I placed there in GarageBand, and the audio plays fine through iWeb, but I can't get ANY audio on the web with ANY browser, only what appears to be a picture and a QuickTime placeholder or something. Also, I subscribed the website to iTunes and that worked, but of course I can't download my first podcast. Help!
    The site is http://www.thatangryblackman.com. As a warning, there is some explicit language on some of the entries there, but it's otherwise clean. But if someone can help with this, I would greatly appreciate it!
    MacBook Mac OS X (10.4.8)
    MacBook   Mac OS X (10.4.8)  

    It doesn't appear that you QT file has been uploaded to your server...
    http://www.thatangryblackman.com/That-Angry-Black-Man/Da-Blog/53F42A4C-C43C-43DA -8749-DE409A6C8CF9_files/TABMPodcast1.m4a
    It may be that the file was kicked out because your server does not handle .m4a files or maybe the FTP upload simply did not upload the file.
    Check to see if you actually uploaded the movie file. Then you might give Tucows a call and ask them about their server compatibility with the .m4a MIME type.

  • Streaming iOS Podcast audio to Apple TV

    When streaming audio from the iOS Podcast app to Apple TV, I lose the ability to adjust the volume of the playback on my (6.0) iPhone 4. This only happens with the Podcast app. I can stream audio from Downcast, Safari, and the Music app to Apple TV and adjust the playback volume on my iPhone.
    I also have an Airport Express. The iOS Podcast app, along with all the other apps mentioned above, work as it should with Airport Express.
    iOS Podcast seems to have a problem with Apple TV.

    I seem to recall reading, somewhere, that video streaming is limited currently to the Videos app; iirc, they're still working through rights and other issues with other potential users.
    Don't have ATV and am currently feeding our tv using component AV cables, so don't pay a lot of attention to these issues.
    Out of curiosity, though, why would you pick this forum instead of the AirPlay one to be looking around and posting in?

  • OSX Yosemite audio bugs?

    Hey, there.
    I use logic pro X and if you've used this for a while you know about the horrible audio pop bug that came with mavericks and took forever to be fixed I was wondering if any such bug exists for Mavericks before I upgrade.
    Thank you

    It's far too early to say........
    So for now, read this tip and be patient....
    Latest OS X & Logic Pro Compatibility Information

  • Aggregate Audio bug in Tiger?

    I tried to create an Aggregate Audio device using Tiger's Audio MIDI Setup under /Utilities
    I wish to use the aggregate device to broadcast iTunes music through my desk speakers and my Griffin RocketFM fm transmitter to my living room stereo speakers.
    I've set up the Aggregate device with multi-channel, Quadraphonic sound. I can even verify that each channel (left speaker living room, right speaker living room, left speaker desk, and right speaker desk) will receive sound by clicking on the speaker icons in the Audio MIDI Setup application.
    But when I select the Default Output device to be this new aggregate, only my desk speakers produce sound.
    What is going on here? Why can't my RocketFM send sound to my living room speakers via the aggregate device, but it can if I send sound to just the RocketFM? Has anyone else had this problem in 10.4.3? I just bought Tiger, more or less for this functionality (everything else was gravy to me) and it doesn't work as I'd hoped. Any help?

    Ok David
    I don't pretend to be an expert here but this is what I've found out from my limited experments.
    1. There is no "10 channel limit" I was able to use the 410 and a USB audio device to get 12 channels of output.
    2. I don't think the system was designed to do what you want.. send the same signal to more than one output at the time.
    3. I think the system was designed to aggregrate interfaces for multi channel use... 3 stereo interfaces for 5.1 surround.
    Whatever decide you added FIRST to your aggregrate device is the one that gets a stereo output. So if you added your RocketFM to aggregrate device FIRST, it would get the signal, but not your 2nd interface.
    If you had a 4 channel source, then all for speakers would work, but each would get only one of the four channels.
    I'm guessing that the only speaker setup you were able to select was either stereo, or quad, since (and I'm guessing here), you only had 4 outputs to use. If you had only 4 outputs you couldn't select say, a 7.1 channel setup since you don't have 8 channels of output.
    Notice on the speaker set up that you cannot send any channel number to more than one locaton.
    Channel 1 and 2 = the main stereo channels.
    iTunes is stereo, not multi channel, so the L/R output of iTunes corrosponds to channel 1 and 2 on the speaker set up.
    Now, I agree it seems like you SHOULD be able to set it up like you want.... seems like an easy thing to implement, but from what I can see, either there is a bug as you've suggested, or it was not designed to operate that way in the first place.
    One other note, adding the interlan audio interface didn't give me any more outputs for some strange reason..
    Using the 410 and the internal outputs only gave me 10 outputs
    Using the USB audio device and the internal outputs only gave me 2 outputs
    but using the USB and the 410 gave me 12... go figure.
    Under no circumstances could I get my Pro-Tools Mbox to show up in the aggregrate editor, tho it does show up in the sound pref pane.

  • Flash audio bug on Firefox Mozilla on PC

    - Quoted from Bugzilla@mozilla:
    https://bugzilla.mozilla.org/show_bug.cgi?id=289873
    To see the problem, go to
    http://www.spellingcity.com
    User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US;
    rv:1.7.6)
    Gecko/20050317 Firefox/1.0.2
    Build Identifier: Mozilla/5.0 (Windows; U; Windows NT 5.1;
    en-US; rv:1.7.6)
    Gecko/20050317 Firefox/1.0.2
    When using flash players to play audio files, using 15
    players works, but more
    don't:
    WORKS =>
    http://freesound.iua.upf.edu/flashtest.php?x=15
    DOESN'T WORK =>
    http://freesound.iua.upf.edu/flashtest.php?x=16
    DOESN'T WORK =>
    http://freesound.iua.upf.edu/flashtest.php?x=20
    DOESN'T WORK =>
    http://freesound.iua.upf.edu/flashtest.php?x=40
    etc...
    This number is a GLOBAL number: if you open more tabs or more
    instances (making
    the count of flash players larger than 15) the player fails.
    Checked on about 4
    different computers and both OSX and Windows XP.
    Internet Explorer doesn't seem to have problems with more
    than 15 players, and
    using up to 100 players (or more) doesn't impose any
    problems.
    guess: problem is not related to audio, as it works in
    Internet Explorer and
    isn't OS-dependent.
    Reproducible: Always
    Steps to Reproduce:
    1.
    http://freesound.iua.upf.edu/flashtest.php?x=15,
    works
    2.
    http://freesound.iua.upf.edu/flashtest.php?x=16,
    doesn't work

    https://bugbase.adobe.com/index.cfm?event=bug&id=3539635
    https://bugbase.adobe.com/index.cfm?event=bug&id=3541557
    https://bugbase.adobe.com/index.cfm?event=bug&id=3541576
    Please add your vote. We're dying because of this issue.

  • 5.1.2 Audio bug with AIFF files

    I've encountered a strange bug after upgrading to 5.1.2 today. I have 3 Macs with FCP (all upgraded to 5.1.2 today). Was working on a project at work on one of them today and everything worked fine. I imported an AIFF file and decreased the levels on it as part of the project.
    When I brought my project home (I use hot swap hard drives), I went to adjust the levels of that same AIFF file within my project. However, the viewer pane went half black, it did not show me any bit of the audio file and it's peaks. However, I could still adjust the levels. It just seemed to be that there was some sort of video display bug when I tried to adjust the AIFF file in the viewer.
    I looked at some other audio files (recorded through the voiceover control) and they appeared fine in the viewer. Only AIFF files gave me this bug. To try and remedy the problem I tried other AIFF files and also tried restarting the project, etc. Nothing cleared up this problem though. Anyone else experience this?
    Ted

    Why did you post this in the LiveType forum?
    I would recommending posting your question in the Final Cut Pro forum.
    Have you tried trashing your preferences?
    Anyways... here is a thread with a similar problem:
    http://discussions.apple.com/thread.jspa?threadID=656515

  • Inspector is wrong! podcast duration bug/error

    Here's what happened: using iWeb to publish a podcast. After eight episodes, noticed that using an ampersand ("&") in the description made for ugliness in RSS and iTunes ("&" becomes "&-amp" or something). So I go back and edit every entry -- changing "&" to "and." Then I publish. Oh, I also changed the name of the website and the podcast page in the "Site Organizer" area for more clarity.
    Suddenly, episodes are reappearing in my personal iTunes Podcast library, as if I haven't downloaded them yet (so there's a ghost episode wiith "Get" next to it under each ep). If it were just because the description changed, I might understand (though not accept). But the weirdest part is, the duration has also changed -- each episode now says it's 10-15 seconds longer than it actually is. If you "Get" a doubled episode with the wrong time stamp, the time reverts to being correct once the download completes.
    But here's the real problem: when I go into my Entries in iWeb and open the Inspector, then go to RSS > Podcast, the duration is incorrect there. The mp3 file it's referring to has not changed, nor has it been damaged. Somehow the Inspector just decided out of the blue to add some time to each duration for no apparent reason.
    So I manually edited my RSS, but the episodes are still appearing twice in my podcast library (even after clicking Update), and every time I publish I will probably have to manually edit the RSS if I want the time to be correct, since the Inspector, and hence iWeb, has the time wrong.
    Anyone else seen this? It's gotta be a bug, and I don't anticipate there being a fix for it, but I thought I might find comfort in knowing others have run into this.
    Ideal outcome? I don't want my subscribers to get confused and think they have to re-download old episodes, so I'd like for the ghosts/doubles to disappear from subscribers' podcast libraries. I'd also like to be able to get the time stamp/duration to read correctly in the Inspector so that I don't have to manually change that in the RSS file after every time I publish.
    By the way, this is for Never Not Funny, the Jimmy Pardo podcast.
    http://phobos.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=142348028
    Also, not sure it matters, but the feed is routed through FeedBurner to get stats.
    G5   Mac OS X (10.4.6)  

    Thank you for ur replay
    but where is the MOS?
    Before I Write down this thread, I read this "Please read this before you post"
    And they write that we can write bugs here, and write in the title (Bug ___) followed by the main Problem title
    read this !
    Mark Bug and ER thread clearly
    If you are reporting a bug start your subject with BUG. If you are requesting a new feature start your subject with ER.
    Edited by: Muhammad Afifi on May 30, 2010 2:42 AM

  • Premiere Pro CC 2014.2 and AVCHD audio bug

    The AVCHD audio is mangled by Premiere. Details below.
    I recorded a 2 act play and I'm editing it in Premiere. Each act is about 1 hour so the camera recorded spanning MTS files.
    Act 1 imported perfectly. No problem.
    When importing act 2, I noticed some audio glitches and the audio quickly lost sync. After further investigation, I found that:
    - The AVCHD file plays perfectly fine in Quicktime player
    - The audio track in Premiere is exactly half the length of the video
    - When listening closely, it sounds like it plays 1 second, skips 1 second, plays 1 second, etc. Which is consistent with losing sync gradually and finishing the audio twice as fast as the video.
    It seems related to the problem in this thread. I'm at a loss as to what to try next.

    After posting the initial thread, I reinstalled Premiere Pro CC (7.0), created a new project, imported the AVCHD files and the audio was synched.
    I then opened the file in CC 2014 and the audio was still synched.
    So it appears to be a bug in AVCHD conforming in 2014 only. While not a fix, I hope this workaround will help others.

  • PP CC 2014.2 MXF Audio Bug

    After clicking somewhere in a MXF timeline, short and loud audio distortions/noises randomly occur at playback.
    This sometimes also happens while scrubbing trough a MXF timeline.
    No effects on any audio track, just keyframe audio level adjustments.
    Can somebody here reproduce this bug?
    Thanks

    I'm having the same issue. I tried exporting the sequence as XML V5, V4 and even V1, with the same result. The "Import Files" box opens, the queue bar is empty and it locks up.

  • Premiere Pro CC 2014.0.1 update, still audio bugs

    What can I do?, I've been reporting this bug since I have memory, the "audio cuts out" bug is still present, and is really annoying.
    First I thought it was my computer, but searching in google is confirming that the problem have years and is still in the new versions, so, is not my computer.
    I don't know that to do about it.

    Hi Jorge,
    Jorge Jaramillo Hdz wrote:
    I don't know that to do about it.
    Can you try contacting support? If they help you with the issue, please report back. Here's the link: Contact Customer Care
    Just click the blue button to get a chat or phone call started.
    Thanks,
    Kevin

Maybe you are looking for