POL-2000

Hello,
I am developing an application for PDA and I have a problem with the installation in the HTC Touch HD.
I use IBM J9 and Oracle Lite 10g installed in the device, when the aplication starts th following exception ocurrs:
java.sql.SQLException: POL-2000 can't allocate more memory
at oracle.lite.poljdbc.LiteEmbJDBCConnection.jniDriverConnect(Native Method)
at oracle.lite.poljdbc.LiteEmbJDBCConnection.connect
at oracle.lite.poljdbc.LiteEmbJDBCFactory.createConnection
at oracle.lite.poljdbc.POLJDBCConnection.<init>
When the application starts it trys to get connections, this exception ocurrs in the first try of connection.
I test the application in the HTC Diamond and It runs without problems, but I need install the app in the HTC Touch HD.
Sorry for my english and Thanks,
anjo

I dont know the HTC devices, but we have had issues in the past where there are some configuration differences between different models of PDAs even from the same manufacturer.
the main issues tend to be around the way that they dynamically allocate memory between fixed and external storage, and also in the power up differential between the main device and memory cards. we do occasionally get memory type issues on new HP devices that should have plenty of space, and suspect the dynamic allocation of memory between program and storage does not always work as it should, particularly when there is a sudden demand like during a large sync
PDA devices are a real pain to check out or change config parameters as there is no inbuilt utility like on windows.
If you have sufficient main memory space, try putting the database files in main device storage rather than the SD card (on existing device copy the odb files and change the odbc.txt file, or remove odbc.txt and sync with the sd card taken out), and see if you get the same issues. some devices let you adjust the program/storage memory balance manually, if your does, try changing this in favour of storage

Similar Messages

  • [POL-5150] access violation

    I am running 8i Lite on Windows 2000. After creating a user (newuser)in Oracle8 Navigator, I then create a table and set owner to newuser.
    After logging into POLite using SQLPlus as newuser I get a [POL-5150] access violation error when I attempt to select from the table. If I login as SYSTEM and prefix the table (newuser.table_name,) it works fine.
    What gives? Any help would be appreciated.

    After creating a user through the navigator, you need to make sure that you then login through sqlplus as SYSTEM and (create a password for your newuser) "alter user newuser identified by some_password;" ; you then may want to grant either DDL and/or DBA to your "newuser". I ran into the same issue and this seemed to resolve it.
    Hope this helps.

  • Printer name under Win NT/2000

    Hi,
    Does anyone have a VI or an idea how to retrieve the "Default printer
    name" under Windows NT/2000? I am using LabVIEW 6.02.
    Thanks,
    Patrick Pol
    Vitatron, the netherlands

    Patrick,
    I can see where you might want this info, but I know all the Print Report' VIs default to the default printer; however, if you weren't sure which printer was presently set as the default, then it would matter when you print - such as a color printer vs. B/W.
    Here are 2 links to some default printer VIs which may help, if not, just use them as info.
    http://zone.ni.com/devzone/devzoneweb.nsf/opendoc?openagent&E091308B77D6A8C88625683A000AD4BA&cat=FD6839395C5E51CF862567AC005866A9
    http://zone.ni.com/devzone/devzoneweb.nsf/opendoc?openagent&C7659492335F6AA08625695000650A7A&cat=FD6839395C5E51CF862567AC005866A9
    Good Luck, Doug

  • FPS 2000 & Audigy 2

    I recently upgraded my card from Live X-Gamer to an Audigy 2 card.
    I am using FPS 2000 Cambridge Soundworks speakers as well. Now this speaker system is digital input only and it seems as though my rear channel speakers no longer function.
    Is the cabling that is needed to fix this problem available from Creative?
    Thanks in advance.

    Phirmware wrote:
    Thanks for answering Jason. I did see those directions and did try that. Still no luck.
    I guess the reason I asked about the cable was that I saw this in the support section:
    "Creative Speakers with a Digital DIN INput Connector
    The Four Point Surround FPS2000 Digital Multimedia Speaker System, a 4-channel speaker system, has only the Digital Din connector. It does not have any decoding capabilities.
    A Multi-pole mini plug to DIN converter cable is required to connect from the Digital Out on the audio card to the Digital IN on the speaker system."
    http://ask.americas.creative.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=438,E=0000000000064348256,K=7834,Sxi=0,Questio n3895=obj(3895)bj(3897)
    And those are my exact speakers.
    I guess jason thought that you were using the analog line in. This should be the cable you need.
    http://us.creative.com/products/product.asp?category=3&subcategory=58&product=0370

  • X-Fi digital out problem with FPS 2000 speak

    I just upgraded my old SB Li've! to X-Fi ExtremeMusic.
    I connected my 4. digital FPS 2000 Cambridge Soundwork speakers to the digital i/o port at the back of the sound card, but I could only hear from front speakers. Nothing from the rear speakers.
    Also when I run the speaker connection wizard, after I pick digital output, the program only allows me to select either headphone or 2. speakers even though I connected to my FPS2000 which is 4. speakers.
    Is it because my orginal mini-plug to DIN converter cable from FPS2000 is a 3-pole only and X-Fi digital out port is 4-pole? If that's the case, is it possible to buy a 4-pole mini-plug to DIN converter cable which works for FPS2000?
    Will this cable http://us.creative.com/products/product.asp?category=3&subcategory=58&product=0375 &nav=systemRequirements
    work?

    Actually you are having exactly the same problem as other users with DTT3500 or 5700 speakers. The X-Fi does not support the DIN connection. The digital-out of the X-Fi is the industry standard SPDIF. This means only 2-channels can be sent!
    You should connect your FPS speakers to the analog outs of the soundcard. Quality will be anyway better, as the X-Fi includes modern DACs at 24-bits, which is not the case of the FPS2000 speakers.

  • Lock-ups on MCS-7825 after after OS Upgrade to 2000.4.4aSR6

    About 3 weeks ago, I upgraded some MCS-7825 & MCS-7835 servers to 2000.4.4aSR6. Since then, one of the 7825's has been rebooting on its own almost twice a day. The other 7825 and 7835s are operating fine.
    Anybody else encountering a problem with this? I see in the release notes, some BIOS and firmware updates are included for the 7825, and am suspecting this is the problem.

    My problems actually turned out to be hardware, I think. I reviewed the logs and found out it had been happening for several months.

  • Installation problem on windows 2000

    Hi,
    Please help!
    I've been tring to install oracle on windows 2000 machine unsuccessfully. the setup program aborted without error message. I've tried many versions of oracle database, 8.1.7 all editions, 8.1.6ee, 9iAS. the only message error I got when 9iAS failed to install (iSetup.exe). the problem seems to be with the java runtime environment. the jre 1.1.7 came with 9iAS would not run properly. I've tried to install java2 and jdk1.1.8 from javasoft, still no luck.
    Any idea?
    Thanks,
    Jay Lee
    [email protected]
    null

    Hi,
    The problem of installing Oracle Product on P4 computers comes from the symcjit.dll (Java Jusit in time compiler) which doesn't recognize the P4.
    I installed Oracle products on my P4 just by copying the CD's on a harddisk and manually replacing the dll (which is Version 3...) by a one I found to be Version 4.0.0.7.
    It is maybe not the best solution as it can result some instability (I don't know yet) but at least I didn't bought a brand new computer for nothing.
    The question is to know when Oracle will deliver some patches to allow a normal installation on P4s.
    Let me know if you want me to send you the dll.
    Regards,
    Jacques.

  • Problem for Report Generation Toolkit for excel 2000

    Hi all,
    Now I am Developing my program with Report Generation Toolkit 1.1.0 and Labview 7.1.
    In my computer I am using Excel XP, and there is not any problem. But when I build to
    a exe file, and use in a computer with Excel 2000, it didn't work.
    And I try to check the source file in this computer, I found that there any some connection
    error. And this is caused by the active X class. As I know Excel 2000 is using Microsoft Excel
    Object Library 9.0, but i cannot find it in the list of active x. So it is using Microsoft Excel Object
    Library with a very old verison. So in the property node there are missing functions, such as the
    UsedRange in _Worksheet in the Excel_Get_Range.vi. However, In VBA, I can find the 9.0 Library.
    Is it the problem of 9.0 library? How can I solve the problem? How can I upgrade the library to 10.0?
    Thanks.
    Regard,
    Ryan

    Hi Mike,
    Since my program is for all the staff in office, everyone may use it.
    I cannot call the whole office to upgrade the excel to XP.
    And I think Report Generation Toolkit is alway support Excel 2000,
    since the old version of it is not support for Excel XP.
    Regard,
    Ryan

  • Why does iCal and Calendar on the iPad do not search before year 2000?

    I have used for many years with great pleasure the agenda of the Psion MX palmtop computer with GUI and touch screen, dating from 1998. All applications (Office apps, WAP internet plus agenda) on this machine are faultless and this Symbian 50 computer never crashes, uses only two AA cells a month and for me it is almost the perfect mobile companion. But Psion has closed down many years ago and the flexible cable between the moving screen and he mainboard breaks down after 8 years of daily service. Spare parts are hard to get by nowadays and so I decided to switch over to the iPad. My agenda covers data from 1980 on and for me it is a the book of my personal and working life after 1980. So I exported the data from the Psion to my MacBook Pro and synchonized these with my iPad 3. I was a bit shocked to discover that iCal on the mac can *not* "Go To" dates before the year 2000. You have to click by hand every month to reach e.g. 1980 (there is no year tab). Searching on data in history works fine on the mac (backward at least until 1980) But on the iPad somtimes the data in these ancient times is not shown at all, you have first to select your calendars 'off' and 'on' again. Searching for old dat doesn't work either, so again you can only visit those data by tapping by hand, hapily here for previous years. It seems that Apple is not very interested in history, where both the iPad and the Mac don't support looking back more then 12 years. Having programmed myself some financial applications in the 1980th I assume these are vey small missing points in the two applications. Didn't anyone at Apple use these calendars for more than any weeks or did they never tested those for serious use? The calendars both function from 1900 on, so even Einstein could have used them som time of his life. Please do some fixing of these apps (it is *really* a small job) and make these applications more coherent to the excellent hardware of Apple
    Frits

    Me too me too!  Please answer!

  • How to reset Windows 7/Vista/XP/2000 password if you forgot or lost windows

    How to reset Windows 7/Vista/XP/2000 password if you forgot or lost windows password
    It is truly very often for us to meet the password problem, sometimes we would forgot windows password or lost windows password, and could not login windows system and make a big trouble. At this time, you would hope to find a way to reset and recover the forgotten password.
    Actually, a lot of methods are available to recover or reset the Windows password. But most of them are designed for PC experts, not common PC users, those solutions are too complicated to get it work for us. And in this article, I will show you a professional software tool which could help you to reset forgotten windows password easily.
    Total Windows Password Reset is powerful password recovery software to reset Windows admin
    passwords for you to login Windows OS without reinstalling the OS when you forgot windows password or lost windows password. It could remove windows password and set the password to blank. Just boot from the program CD/DVD or USB flash drive, choose the account you wish to reset and all will be done. It is not a method to crack or bypass windows password, just remove or delete windows password and set it to blank so you could login windows to set new password.
    Below is the guide of how to reset windows password with this software, only 3 steps are needed to reset windows 7/Vista/XP password:
    Step 1: Download the setup file of Total Windows Password Reset on the official website:
    http://www.resetwindowspassword.net/downloads/totalwpr.exe
    And install it on another PC. Then you could startup the password recovery software to prepare the bootable disc.
    Step 2: Burn the windows password recovery bootable CD/DVD or USB disc with the software.
    Now, you may select “Burn DVD/CD Disc” or “Use USB Disc”. If you select first method, you need to have a blank CDR/DVDR disk, a COMBO or DVDRW drive on the PC. If you select to use USB disc, you just need to pay attention: This USB devices would be formatted, so you must make sure to back up all the data before use it. And the maximum capacity of the USB devices cannot exceed 2G.
    Tips: We recommend you to use the DVD/CD method to do the windows password reset, because some computers may not support USB start-up.
    Below is step by step to show you how to burn the CD/DVD
    1. Launch Total Windows Password Reset main window, Click “Burn DVD/CD Disc” button.
    2. In BurnCC’s main window, click “Browse” button and in the open window, locate the file “TWPR.iso” on your desktop, select it and click on Open to get back to the main window. Then, click “Start” button.
    3 Your DVD drive should open and insert a blank CD-R or DVD-R disc into the drive and close it. Click “OK” button. Your CD will be burned in a few minutes.
    Tips: if there is already a CD/DVD disc in the drive before run the software, the CD drive will open automatically . Please close it again. The process will be continuing.
    Below is step by step to show you how to burn the USB drive
    1 Insert a USB drive into a USB slot on your computer and run Total Windows Password Reset, Click “Use USB Disc” button.
    2 Click“Step1”button. Then, Right-click on the usb_format.exe and choose “Run as Administrator”.
    3 In USB Disk Storage Format window, set the file system to FAT, Check the Quick Format box, check the Create DOS Bootable Disk, Browse to the DOS_files folder on your Desktop, click OK & then Start.
    4. Click OK on the following window and then close the USB format tool. Your USB drive now is formatted.
    5. Click “Step2” button and open the USB drive with your computer. Then, copy the files from the USB_files folder and paste them directly to the USB drives main directory. 2 of the files may become hidden and you will not see them on the USB drive. This is okay. Your USB drive is now complete.
    Step 3: Boot your PC with the burned CD/DVD or USB disc to reset windows password.
    You need to insert the Created CD/DVD or USB drive into the optional drive of the locked computer and reboot it.
    Tips: It your computer still boots from hard drive Windows OS, it's necessary for you to change your COMS or BIOS settings to make it boot from CD/DVD or USB drive. If you don’t know how to set it, you may visit the official website: http://www.resetwindowspassword.net or contact the computer manufacture.
    The computer boots from CD/DVD or USB drive, then
    1 The program will ask for the Windows OS hard drive volume. Enter the ID number of the hard drive volume that Windows is installed.
    2 The program has detected all the user names of Windows and asks which user name password is to be removed. Enter the ID number for the User Name.
    3 The program asks to confirm weather to remove the password or not. Enter "y" (yes) to confirm your action and "n" (no) to deny the action and hit "Enter".
    4 The program asks whether to continue to remove passwords for other accounts. Enter "y" to continue and "n" to finish. Eject your USB from your computer first and press any key to restart the computer from Windows. Now you can log in Windows with an empty password (with no password.), just click “Enter” when you login.
    If you have any questions of the procedure and the settings, you could visit the website:http://www.resetwindowspassword.net or send email to [email protected].
    Now you could see that to reset or recover the admin login password of windows OS: XP, Vista, Windows 7 or 2000 is not so difficult and you can do it with ease.

    Very interest posting. Thank you for this detailed description and useful links.
    If you have more interesting stuff to share with us you are welcome.

  • OS Reinstallation on Portege 2000 with non IDE CD-ROM

    Hello,
    I recently received from my Dad a Portege 2000 (bought in Japan if that makes a difference) on which I am trying to reinstall Win XP from the provided Recovery CDs (there are 3 CDs containing Win XP Pro and Win 2000).
    I am trying to do this with a USB FDD and a PCMCIA Sony CRX75A CD-Rom which connects to the computer via a other manufacture PC Card ACR-A01 switchable between 16 bit and CardBus mode).
    As I am not very familiar with DOS, CardBus and booting stuff I read quite some topics and found the following application, BootdiskP2000.EXE which contains drivers for PCMCIA and USB Toshiba CD-ROM. So I ran it and when choosing external PCMCIA CD Drive from the menu, I got the following:
    PC Card driver for external ATAPI-IDE Drives Rev:2203
    Found PCCARD: IO DATA CBIDE2 V4.1
    ERROR: There is no PCCARD in socket A and B!
    PCCARD not initialized!!
    So, I looked on the web for DOS Drivers for my ACR-A01 and found DUAOTA16.SYS and DUOATACD.SYS. I then modified my CONFIG.SYS (again maybe not correctly as I am not at ease with that) by adding a menuitem, and further on:
    [SONY]
    DEVICE=A:\DUOATA16.SYS
    DEVICE=A:\DUOATACD.SYS /D:TOSCD001
    When running it, I get the followings:
    DuoATA16 CS Client Driver Version 1.01
    Copyright....
    CBIDE2: Not found CardServices.
    Driver is not installed.
    DuoATACD CD-ROM Driver Version 1.06
    Copyright....
    IDECD: Not Configuration CBIDE2 Card.
    CD-ROM driver is not installed.
    If have a look on the HISTORY.TXT file from the boot disk, at the end it is written: "If you use it with other CD-Roms, you have to modify/exchange normaly the CD-Rom driver (e.g. Toscdrom.sys-file!) and the driver, over which you get access to the PCMCIA Card (Fcatapi.sys and FCPoint.exe)." but I have no idea with what I'd have to replace it.
    Last point, my BIOS settings on page 2 are: Device Config.=All Devices which allows me to set PC CARD Controller Mode=CardBus/16-Bit, and by the way the onther manufacture CD-ROM used to work fine with the Portege but with a Win XP driver.
    Anyone has an idea of what is going on here, because I'm kind of lost. Thanx a lot!!!
    P.S I also tried to boot via PXE-LAN from a PC running Win Server 2003 but that doesn't work either, but I'll start a new topic for that.

    And why you don´t try maybe a USB-DVD-ROM? A USB will be recognized for sure. I installed on my Portege R200 a XP Pro with a USB-DVD-ROM.
    Greets

  • Can I install Oracle 8.1.7 Enterprise Edition on Windows 2000 Professional

    Sorry if this is a stupid question, but I have Windows 2000 professional edition loaded on my PC and I'm not sure what it allows. Can I load Oracle 8.1.7 Enterprise Edition of the database on this operating system, or do I need to load windows 2000 server software.
    Thanks
    Ryan

    Its a problem with oracle and pentium 4 processors actually. The solution involves renaming or deleting the symcjit.dll in the 8i installation package after you've copied the whole Cd onto your HDD!
    I've tried this and it install OK, with a few errors along the way, now I can't get the apache server working, nor on the 9i AS that I've installed as well. Let me know if you get anything useful please?
    Michael.
    [email protected]

  • Can I install Oracle 8.1.5 on Windows 2000 server or Windows 2000 professional

    Hi,
    Can I install Oracle 8.1.5 on a Windows 2000 server or Windows 2000 professional server?
    Regards,
    Zurvaan

    Yes, of course. Both versions works but you have to be prepared for lots of RAM.

  • Word 2000 hyperlinks don't work in .pdf created with Acrobat 9 Pro

    I'm new to Adobe Forums, so please overlook the effrontery of my posting a query previously discussed. Perhaps someone can simply reply with a link to the prior discussion. I have installed Acrobat 9.2 Pro in 2 computers, one running XP64 Pro, the other XP32 Pro. Word 2000 is installed in both. All Word hyperlinks work fine, but after .pdf conversion using Acrobat 9.2 Pro, none of these work. In 'Preferences', I have navigated Convert to PDF > Microsoft Office Office Word > Edit Settings > Add Links to Adobe PDF File and confirmed that the Add Links feature is enabled. Having ascertained that this glitch is not specific to either XP64 or XP32 operating systems, I uninstalled Acrobat 9.2 Pro from the XP32 computer and reinstalled Acrobat 6.1 Pro. Then using the same Word 2000 document, I converted to .pdf using Acrobat 6.1 Pro, with no problems whatsoever. This looks like a serious bug in Acrobat 9 Pro, which the telephone support folks have acknowledged. Alas, they won't give me the tiniest clue how to resolve it, nor any workaround, but merely refer me to AdobeForums.com for help. I suspect a corrective patch or 'upgrade' will be forthcoming, but meanwhile, if anyone knows of a workaround, please enlighten me. Thanks. /rmbrown

    Thank you, CtDave, for your speedy reply and for the 'Acrobat Technical Evangelist' knowledge base article. Word 2000 is one of Microsoft's masterpieces - by disabling 'autosave', the application is totally stable, does not require 'activation' by Microsoft. Acrobat 9 enables 'saving' of interactive .pdf forms, a most valuable feature and one much appreciated by anyone completiing such forms. There must be more to this issue than 'incompatibility', because I can create a test Word 2000 document, hyperlink a valid URL, convert to .pdf with Acrobat 9, and the hyperlink works fine in Acrobat 9. When I attempt to do this using a much more complex Word 2000 document, embedded with scores of hyperlinks, these links fail to work following conversion to .pdf with Acrobat 9, but work fine following conversion to .pdf with  Acrobat 6. I can then use Acrobat 9 to open the .pdf created with Acrobat 6, and successfully edit any of these fully functional hyperlinks using the 'Link tool'. I don't know who prepared the 'Acrobat Technical Evangelist' article (AF1908DCd01) - no credits were cited, and I'm far from certain that this authentically belongs to Adobe's knowledge base. So I appreciate your sharing this information with me, but I cannot say that my question has been definitively answered. If you have any further information or tips, please reply in this thread. /rmbrown

  • Want to convert function in SQL Server 2000

    Hi ,
    i am writing this function in oracle.Could you please convert this function in SQL Server 2000 because i am new in this and dont know how to use decode function in sql.
    Please following is the code for oracle.
    CREATE OR REPLACE function fun ( localex varchar2,titlex varchar2)
    return number
    as  x number;
    begin
    select sum ( decode (count (username),max(prereq_count),1,0) ) x into x from
       SELECT
                       prereq_count,
                       username
                 FROM
                         table1
    group by     username ;
    return x;
    end fun;
    Regards
    Vishal

    Just take a look example below might give you idea :
    create or replace function f_makeAddress_tx (
    i_address_tx VARCHAR2,
    i_city_tx VARCHAR2,
    i_state_tx VARCHAR2,
    i_zip_tx VARCHAR2)
    return VARCHAR2
    is
    e_badZip EXCEPTION; u279E8
    pragma EXCEPTION_init(e_badZip,-20998); u279E9
    v_out_tx VARCHAR2(256);
    begin
    p_validateZip (i_zip_tx); u279E12
    v_out_tx:= i_address_tx||u2019, u2018|| u279E13
    i_city_tx ||u2019, u2018||
    i_state_tx ||u2019, u2018||
    i_zip_tx;
    return v_out_tx; u279E17
    exception
    when e_badZip then u279E19
    return i_zip_tx || u2018: Invalid zip code.u2019;
    end;
    Regards,
    Clint

Maybe you are looking for