Pop up a window to show images

Hi, I am trying to show images when the user rolls the mouse
over the image but I want to show them as a pop up window only when
the user is on the image.
Any ideas how can I handle this? I will have variety of
images and want the same behavior for all of them.

mouseOver and mouseOut event functions for the images.

Similar Messages

How to construct a window that shows images in a continuous rotation on a webpage using flash

Would like to know how to create a window in a web page that shows images in a continuous rotation

There are dozens of ways to accomplish this. What sort of experience with Flash do you have? A very simple method is to just place each image on the timeline. Set a frame rate for the movie, and then extend each image's extent on the timeline to allow it to be shown for the duration that you want. For instance, with the frame rate set to 15 fps, to show each image for 1 second, you would have each image occupy 15 frames. Add or subtract frames to suit your needs. You can add transitions between each image if you like.

How to make mouseover effect text show image in popup window or tooltip?

I am trying to display a popup image in a new window when the mouse moves over some text. Or perhaps, the image could display in a tooltip when the mouse moves over some text.
However, I have achieved the functionality of an image appearing above the text when the mouse moves over some text. This is how I did this:
I put this code into the Page HTML Header:
<script type="text/javascript">

</script>
I created a region and put this in the Region's Title field:
{div onmouseover="setFirstChildImgDisplay(this,'inline')" onmouseout="setFirstChildImgDisplay(this,'none')">Check out Page 1 here <img src="#WORKSPACE_IMAGES#DGNR Preview Page 1.bmp" alt="Page 1 Preview" style="display:none;">{/div}
I am thinking that I should not have all of this code in the Region's Title field. But, I don't know where else to put it in APEX.
So my questions are:
1. how to get an image to display in a popup window or as a tooltip when the mouse is moved over some text?
2. where should the {div} content be placed in APEX, if not in the Title field?
Please note that I used '{' & '}' instead of '<' & '>' just so the div would display in this post.
Also, I would like to give credit to this website because this is where I found out how to do what I have provided above.
http://forums.devshed.com/web-design-help-2/mouseover-effect-text-shows-image-321876.html
Thank you in advance,
Maggie

It's just an image map. Play with the settings. Here's a shape layer making a hole in the water and adding a bit of color.

Hi, I have trouble loading my iPhone 5 photos into Aperture. The iPhone icon appears in the import window, but the images won't show up in the loading window.

Hi, I have trouble loading my iPhone 5 photos into Aperture. The iPhone icon appears in the import window, but the images won't show up in the loading window

The iPhone icon appears in the import window, but the images won't show up in the loading window
Do your images show, if you disable the option "Do not import duplicates"? If yes, then check, if the images have already been imported, eg. using Photo Stream, if you are using Aperture 3.3 or later.
Aperture 2, Mac OS X (10.6.8)
Is your profile signature above still current?

How do I get pop-up windows to show the navigation buttons (not just the address box)?

When I click on a link that opens a new firefox window, the new window shows a navigation toolbar that does not include the back, forward, stop, and home buttons (it only shows the internet address box). However, the original firefox window that I navigated away from shows all of the navigation buttons AND the address bar. How do I get these new firefox windows to show the navigation buttons in addition to the address box that automatically appears?

See:
http://kb.mozillazine.org/Prevent_websites_from_disabling_new_window_features
http://kb.mozillazine.org/JavaScript#Advanced_JavaScript_settings

Windows Activation Technologies keeps popping up even though it shows activated

I have a PC with Windows 7 Enterprise that keeps popping up a Windows Activation Technologies message even though the Properties windows indicates it is activated. I have tried re-activating over the Internet and manually over the phone; both times indicating
successful activation. Yet, every day around 7pm, the WAT message will appear.
I have downloaded and run the MGADiag tool and have pasted the report below. I would appreciate if someone would review and provide a possible solution. Thank you.
Diagnostic Report (1.9.0027.0):
Windows Validation Data-->
Validation Code: 0
Cached Online Validation Code: 0x0
Windows Product Key: *****-*****-*****-*****-RM3GQ
Windows Product Key Hash: 9A1vDXhWtQtWMdw6ma4nVjEJwcA=
Windows Product ID: 55041-011-2023597-86239
Windows Product ID Type: 6
Windows License Type: Volume MAK
Windows OS version: 6.1.7601.2.00010100.1.0.004
ID: {A9DD2D1A-0BB8-473B-96C1-BF326345A835}(1)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Enterprise
Architecture: 0x00000000
Build lab: 7601.win7sp1_gdr.130708-1532
TTS Error:
Validation Diagnostic:
Resolution Status: N/A
Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002
OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002
OGA Data-->
Office Status: 109 N/A
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3
Browser Data-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default Browser: C:\Program Files\Internet Explorer\iexplore.exe
Download signed ActiveX controls: Prompt
Download unsigned ActiveX controls: Disabled
Run ActiveX controls and plug-ins: Allowed
Initialize and script ActiveX controls not marked as safe: Disabled
Allow scripting of Internet Explorer Webbrowser control: Disabled
Active scripting: Allowed
Script ActiveX controls marked as safe for scripting: Allowed
File Scan Data-->
Other data-->
Office Details: <GenuineResults><MachineData><UGUID>{A9DD2D1A-0BB8-473B-96C1-BF326345A835}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010100.1.0.004</OS><Architecture>x32</Architecture><PKey>*****-*****-*****-*****-BBBBB</PKey><PID>55041-011-2023597-86239</PID><PIDType>6</PIDType><SID>S-1-5-21-36787291-2862434332-4262826802</SID><SYSTEM><Manufacturer>Dell
Inc</Manufacturer><Model>XPS 630i</Model></SYSTEM><BIOS><Manufacturer>Dell Inc.</Manufacturer><Version>1.0.13</Version><SMBIOSVersion major="2" minor="5"/><Date>20090505000000.000000+000</Date></BIOS><HWID>FD023207018400F8</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>Pacific
Standard Time(GMT-08:00)</TimeZone><iJoin>0</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM><OEMID>DELL </OEMID><OEMTableID>MC09
</OEMTableID></OEM><GANotification/></MachineData><Software><Office><Result>109</Result><Products/><Applications/></Office></Software></GenuineResults>
Spsys.log Content: 0x80070002
Licensing Data-->
Software licensing service version: 6.1.7601.17514
Name: Windows(R) 7, Enterprise edition
Description: Windows Operating System - Windows(R) 7, VOLUME_MAK channel
Activation ID: 9abf5984-9c16-46f2-ad1e-7fe15931a8dd
Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 55041-00172-011-202359-03-1033-7601.0000-3522013
Installation ID: 019726640376799193522395807435220550173544189684978955
Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use License URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial Product Key: RM3GQ
License Status: Licensed
Remaining Windows rearm count: 4
Trusted time: 1/8/2014 9:06:56 AM
Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: 0x8004FC12
HealthStatus: 0x0000000000000000
Event Time Stamp: 1:8:2014 07:11
ActiveX: Registered, Version: 7.1.7600.16395
Admin Service: Registered, Version: 7.1.7600.16395
HealthStatus Bitmask Output:
HWID Data-->
HWID Hash Current: NAAAAAEAAgABAAEAAwACAAAAAQABAAEAeqhq4w4XSCQqaxzSAuXaroB9TOqaiEJvmF9MWA==
OEM Activation 1.0 Data-->
N/A
OEM Activation 2.0 Data-->
BIOS valid for OA 2.0: yes
Windows marker version: 0x0
OEMID and OEMTableID Consistent: yes
BIOS Information:
ACPI Table Name OEMID Value
OEMTableID Value
APIC DELL
MC09
FACP DELL
MC09
HPET DELL
MC09
BOOT DELL
MC09
MCFG DELL
MC09
SLIC DELL
MC09
SSDT PmRef
CpuPm

Hi,
Using slmgr /rlic command in elevated command prompt to reinstall the license files. This option reinstalls all licenses stored in %SystemRoot%\system32\oem and %SystemRoot%\System32\spp\tokens. These are “known-good” copies stored during installation.
Alex Zhao
TechNet Community Support

Iphone 4 will not show up on computer or in itunes. After several attempts to restart, only showing image to connect to itunes. Everything is plugged and it and I have the most up to date version of itunes.

My iphone 4 only shows image to connect to itunes. It will not come up in itunes and does not appear to be connecting to my computer. I have attempted to restart my phone numerous times but it just keeps going back to this same screen. Please help.

Did you make a backup because you can't recover what's on our phone. Follow these steps to resotre your phone (the phone has to be plugged into your computer):
1) On your phone, press your sleep button for 2 seconds
2) After the two seconds, don't release the sleep and press the home button for 10 seconds
3) Release the sleep button and keep the home buttton pressed untill your computer detects your phone.
4) A window should pop up and you should have the restore button. Press it.

How can i show images from different folders in image gallery

Hi All,
         i have downloaded and executed photo viewer image gallery application.
          in that we r showing images sequentially what we have defined in xml file.
         but i want show images randomly or i want show images from different gallary.
Can any one help me.
thanks
Raghu.

WaqarLFC7 wrote:
On Windows:
Ctrl + click on the songs you want to group - then right click and click get info and it will ask you if you want to get info for multiple items click YES then under album name it whatever you want and them songs will be grouped into 1 album.
Mac:
Same procedure but hit SHIFT instead of CTRL.
Actually, it's right click or ctrl click, same as windows.

When using pop up editor windows on a Joomla 1.0.15 website the URLs selected in the pop-up are not passed back to the main window

The Joomla content management system version 1.0.15 provides a content editor which uses pop-up windows to select images and files. When using any of these pop up editor windows since 3.6.9 the URLs selected in the pop-up are not passed back to the main editor window.
Up until FF 3.6.8 there were no problems, but FF 3.6.9 and 3.6.10 both exhibit this same problem, as does FF 4 Beta 6. (Support Question raised on this forum in early September when 2.6.9 was released but no response)

Do you have that problem when running in the Firefox SafeMode?
[http://support.mozilla.com/en-US/kb/Safe+Mode]
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this:
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

While trying to access i phone through pc (windows 7 ) showing error 'you do not have permission to access this device '

while trying to access i phone through pc (windows 7 ) showing error 'you do not have permission to access this device '
And while trying to unlock screen after lock , slide not working 'slide to unlock'

Hello there, charialji.
The following Knowledge Base article offers some great steps for troubleshooting your issue:
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
Resolution
If a single application is not responding or stops responding when it opens, you can force it to close.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Not able to install sysprepped Windows 8.1 image, an OfflineServicing error appears.

Hello
I have Windows 8.1 Enterprise image failing at the end of the PE phase from a
WDS Server. I´ve searching through every related post but nothing solves the issue. My scenario is similar to this one (http://social.technet.microsoft.com/Forums/en-US/7ce4c49d-e8a4-460a-ae17-240daaf5f50e/deploying-a-win7-image-via-wds-fails-with-offlineservicing-error?forum=w7itproinstall),
but with Windows 8.1 Enterprise instead.
Basically, I have sysprepped Windows 8.1 and capture the image successfully without any problem. Then, I´ve uploaded the image to my WDS without any unattend xml file, but when trying to install it I get the following error message after completing the "Expanding
Windows Files" phase:
“Windows could not apply unattend settings during pass [offlineServicing]”
I´ve used the official image release, plus the only one partition disk is formatted before the installation. Every configuration seems to be set correctly. I wonder if there is any particular issue related to Windows 8.1.
I´ve already done this procedure with many other OS images and I´ve never got this error message.
Furthermore, I also tried to perform the installation with an empty unattend answer file attached to the deployed image, but the error still appears.
I wonder if the Win8.1 image needs a proper configuration of the unattend answer file, specially on the
Pass 2 of OfflineServicing. Unfortunately I don´t know how to configure it. I would like to keep the credentials and partition configuration be set manually.
Thank you for any help you can give me.

Hello, thanks for the replay but I didn't found any relevant log file on the client machine.
Unattend mode is unchecked, and I haven't used DISM at all when creating the image. I haven't also opened nor updated any metroApp (although if this were the case, it would raise an issue on sysprep phase).
X:\Windows\panther directory does not exists; (C: volume is not available at installation phase)
X:\Windows\diagerr.xml doesn't have any relevant information (it defines some AtrributeType tags with a number in a xml format but it has no content on any tag.)
X:\windows\tracing\ folder is empty;
X:\windows\Logs & \Logs\CBS folders are empty;
I've checked all the volume and I couldn't find any relevant log which shows an error on the instalation.
In addition, I tried to look into WDS server, but the Enable Log property that the article refers for Windows Server 2012 (WDS is installed in a Windows Server 2012), is not shown at the
EventViewer - Deployment-Services-Diagnostics section. Plus, I search the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Tracing\WDSMGMT
entry in order to enable it, but it does not exist.
WDS worked and is working without any issue regardless this Windows 8.1 image. I don't think it has a somthing to do with its configuration.
Looking forward to hearing from you.

Jpeg icons not showing image in My Pictures

This hasn't happened to me before. When I edit a jpeg in Photoshop CS3 in this case, and save it in a file in My Pictures, when I go to find it again I notice there is just the Photoshop Logo instead of the actual picture image showing, not too helpful to find pictures you are looking for. It is still a jpeg but it switched from the actual picture to the logo after I saved it from Photoshop. Any tips? I'm hesitant to edit any more from my trip for fear of having to open up one at a time to see what it is!
Thank you for any help.

Vista 32bit is the computer I
am on. On another reply they asked if I had the wrong Windows Explorer setting so didn't show images. All jpeg images show as downloaded from camera but when I edit and save from Photoshop, those edited images then show the PS icon only, no picture.

No windows are showing up! (CS5.1 Extended)

Photoshop, as an application, opens fine. The toolbars and sidebars all show up, but when I open a file (i.e. a JPEG, PSD, etc) the layor shows up on the sidebar, but the window of the image never opens. To add to the issue, there is no error message, thus Tech Support was not useful at all. Please help!

I can’t see my images and only get a black screen (or strange pattern).
Mylenium

Finder doesn't show image dimensions

Hi!
I have a problem with image dimensions in Finder. Finder doesn't show image dimension info in preview column and Get Info window. But when I open in Preview app I can see dimensions in Get Info window. How to solve this problem. If I want to sort images by dimension, I can't do that. Because Finder doesn't know image dimensions. You can see images below.

Terence Devlin wrote:
That's because the Finder is a file manager and works from file metadata. The data you're seeking is about the file contents. You need to use a Photo Manager or Browser.
There is someone who can sort images by dimensions and see dimensions in list view. Also if Finder will not show image dimensions, why give me "Dimensions" and "Resolution" option to select in list view.
VikingOSX wrote:
Launch a Finder window. Press command+J, and set Show Item Info. Now the image dimensions will show below each image icon. If it is a movie, then the duration of the movie is shown.
I have done this. But doesn't show information.

Show image in crystal report 2008

Hi All,
I have a UDF - image type in Sales order Line item which stores image.
Currently I want to display sales order line item data in CR2008 using a query.
All data is coming but image field is showing image name in place of showing image.
How can I show image.
Kindly suggest.
Deep Kulshrestha

Hi Deep,
An image type UDF only stores the image name in the database. When you add an image, the SBO client takes a copy of the image file and puts it in the Pictures folder (as defined in General Settings). Therefore, to use dynamic images in Crystal you will need to do the following:
1) Create a formula in Crystal that combines the image name from the UDF field and the path to the Pictures folder to create the full path to the image (note: your Pictures folder must use a UNC or mapped drive path rather than a local path). It's easiest just to hardcode the path to the Pictures folder in the report but you'll have to bear in mind that this setting is company database specific. If you want to be able to run the report for multiple SBO databases then you may need to use a formula to change the path (you could add the OADM table to the report but there is no suitable join between this table and other tables in the database. The report would work because there is only ever 1 record in OADM but it's not good report design).
2) Once you have your formula you can add a add a picture to the body of the report (at this point you should select a default image)
3) Right-click the picture on the layout and choose Format Graphic.
4) Select the Picture tab and click on the formula button to the right of the Graphic Location property
5) In the formula window set the return value to the formula you created in step 1.
6) At this point your image will dynamically change based on the UDF value. You may want to set a formula in the Suppress property of the image so that the default image is hidden if the UDF field is blank for a particular record.
Kind Regards,
Owen

Pop up a window to show images

Similar Messages

Maybe you are looking for