How to construct a window that shows images in a continuous rotation on a webpage using flash

Would like to know how to create a window in a web page that shows images in a continuous rotation

There are dozens of ways to accomplish this. What sort of experience with Flash do you have? A very simple method is to just place each image on the timeline. Set a frame rate for the movie, and then extend each image's extent on the timeline to allow it to be shown for the duration that you want. For instance, with the frame rate set to 15 fps, to show each image for 1 second, you would have each image occupy 15 frames. Add or subtract frames to suit your needs. You can add transitions between each image if you like.

Similar Messages

How to create a popup window that shows detail information when press submi

hi,all
how to create a popup window that shows detail information when press the submit button ?I mean,when I press the button "Sumit"there will appear a popup window that shows the detail information you typed before.it means are u sure to submit,it is like some confirmation window.
how to do achieve this ?help plz .
best regards
hlee
Edited by: hlee on 2011-4-15 上午1:26

hey,vee
thanks for your response,but i had already read this thread before i put up a new question.any way,thanks.
best regards
hlee

When i Place a PSD in Indesign it comes in at 200+% while the image frame is considerably smaller. How do i place so that the image and image frame match?

When i Place a PSD in Indesign it comes in at 200+% while the image frame is considerably smaller. How do i place so that the image and image frame match?

Peter,
The screenshots tell you everything.
The second one tells you how the image frame is automatically set up after a one-click place. It's the blue stroked rectangle with the eight control points at each corner and mid-way along the line. This image frame is generated at a proportionally correct height and width for the image it contains.
Now, if you look at the third screenshot (click on it to see it at a larger size), you will see I've used the direct selection tool (white arrow) to click on the image within the image frame. This CLEARLY shows the image (within the image frame) is substantially larger than the frame generated to contain it. This is indicated by the yellow stroked rectangle with the eight control points at each corner and mid-way along the line.
Notice that the blue and yellow rectangles are vastly different sizes.
In InDesign CS5.5, when i clicked to place the image, the image would fit perfectly within its image frame. the blue and yellow rectangles would match.
I had no need to go click on the proportional fill and centre buttons like i need to do now in CC.
I have a keyboard shortcut to place. I can't do File > Place for the amount of images i need to place.
So to reiterate: How do i place an image so that the image and image frame match?

How to create an applet that shows a pdf as non-editable.

Hi friends,
Does any one know how to create an applet that shows a pdf document (should make that pdf a non-editable one) while clicking a link.Its urgent for me as I have to complete this one tomorrow itself...please help me...
I am able to view the pdf document but that cannot be make a non-editable one.
Can anyone gave me the code for that one....please I am not very much good in Java.

PDF is a proprietary format and Java doesn't support it by default. Are you using a 3rd party tool to create the PDF? If so, you need to review the developer docs to see how to make the document non-editable. Frankly, I don't see why you're using an Applet to view a PDF in the first place. What exactly are you trying to do. I'm confused.

Hi, how to post facebook status that shows via iOS?, Hi, how to post facebook status that shows via iOS?, Hi, how to post facebook status that shows via iOS?

How to post facebook status that shows via iOS?

Only photos shared directly to installed Facebook shows "via iOS"..
You've answered your own question there. The Facebook app does not show "via iOS".

Why can't there be a simple utility that shows me which device connected to my Airport is using how much of the bandwidth in a simple graphical or stats format without requiring me to be a level 10 Black Belt or Chuck Norris' paternal tooth fairy?

Why can't there be a simple utility that shows me which device connected to my Airport is using how much of the bandwidth in a simple graphical or stats format without requiring me to be a level 10 Black Belt or Chuck Norris' paternal tooth fairy?
I need to see who is consuming the most bandwidth and limit that user/device. A very simple and dare I say it, legal, moral, and normal wish.

They are not overloading the Airport. They are overwhelming the capacity of your Internet connection.
No. It's not "shared equally". That's not how packet switched networks function.
Most consumer grade routers do not have the ability to restrict bandwidth use on a per machine basis. You need relatively expensive (but readily available) equipment to do that.
How many people are on the network? It can't be that hard to hunt them down.

How to format paragraph string to show content left, Right or middle of pdf document using iTextsharp ' vb

Dear All
how to format paragraph string to show content left, Right or middle of pdf document using iTextsharp in visual basic and absolute position on the document.
Thanks

Here is one more example that i have modified the GetCell function so that you can use it for adding all the cells to the document. It takes several arguments to specify everything you need to create each cell. It now lets
you specify the Text, the Text Alignment, the Text Font and color, weather the cell shows the Border, the BackColor of the cell, and the Padding values for the Left, Right, Top, and Bottom.
If you study the code you should be able to figure out how it works. From here you can figure out the rest of what you need to do and how to use the
GetCell function.
With one quick google search for "iTextSharp Documentation" the first link to pop up was this link.
iTextSharp Documentation
Imports System.IO
Imports Its = iTextSharp.text
Public Class Form1
Private dt As New DataTable
Private Sub Form1_FormClosing(ByVal sender As Object, ByVal e As System.Windows.Forms.FormClosingEventArgs) Handles Me.FormClosing
dt.Dispose()
End Sub
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
dt.Columns.Add("Name")
dt.Columns.Add("Age")
dt.Columns.Add("Birth Date")
dt.Rows.Add(New Object() {"Johnny", "23", Now.AddYears(-23).ToString})
dt.Rows.Add(New Object() {"Frank", "41", Now.AddYears(-41).ToString})
dt.Rows.Add(New Object() {"Rex", "33", Now.AddYears(-33).ToString})
dt.Rows.Add(New Object() {"Kim", "26", Now.AddYears(-26).ToString})
End Sub
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim MyPdfFilePath As String = "C:\TestFolder\MyPdf.pdf"
Dim pSize As New Its.Rectangle(Its.PageSize.A4)
Dim PdfDoc As Its.Document = New Its.Document(pSize, 10, 10, 10, 10)
Dim PdfImage As New Its.Jpeg(New Uri("C:\TestFolder\MyLogo.jpg"))
PdfImage.Alignment = Its.Jpeg.ALIGN_CENTER
Dim pTable As New Its.pdf.PdfPTable(1)
pTable.AddCell(getCell("Name : " & TextBox1.Text, Its.pdf.PdfPCell.ALIGN_CENTER, Its.FontFactory.GetFont("Arial", 15, Its.BaseColor.BLACK), False, Its.BaseColor.WHITE, 10, 0, 0, 0))
pTable.AddCell(getCell("Policy : " & TextBox2.Text, Its.pdf.PdfPCell.ALIGN_CENTER, Its.FontFactory.GetFont("Arial", 20, Its.BaseColor.RED), False, Its.BaseColor.WHITE, 10, 20, 0, 0))
Dim cTable As New Its.pdf.PdfPTable(dt.Columns.Count)
For Each col As DataColumn In dt.Columns
cTable.AddCell(getCell(col.ColumnName, Its.pdf.PdfPCell.ALIGN_CENTER, Its.FontFactory.GetFont("Arial", 12, Its.BaseColor.WHITE), True, Its.BaseColor.BLUE, 3, 5, 0, 0))
Next
Dim tblfont As Its.Font = Its.FontFactory.GetFont("Arial", 10, Its.BaseColor.BLACK)
For Each row As DataRow In dt.Rows
cTable.AddCell(getCell(row.Field(Of String)("Name"), Its.pdf.PdfPCell.ALIGN_LEFT, tblfont, True, Its.BaseColor.WHITE, 3, 4, 3, 0))
cTable.AddCell(getCell(row.Field(Of String)("Age"), Its.pdf.PdfPCell.ALIGN_CENTER, tblfont, True, Its.BaseColor.WHITE, 3, 4, 0, 0))
cTable.AddCell(getCell(row.Field(Of String)("Birth Date"), Its.pdf.PdfPCell.ALIGN_RIGHT, tblfont, True, Its.BaseColor.WHITE, 3, 4, 0, 3))
Next
Using fs As New FileStream(MyPdfFilePath, FileMode.Create, FileAccess.Write, FileShare.None)
Using pdfWrite As Its.pdf.PdfWriter = Its.pdf.PdfWriter.GetInstance(PdfDoc, fs)
PdfDoc.Open()
PdfDoc.Add(PdfImage)
PdfDoc.Add(pTable)
PdfDoc.Add(cTable)
PdfDoc.Close()
End Using
End Using
PdfDoc.Dispose()
End Sub
''' <summary>Creates a new cell for the table.</summary>
''' <param name="text">The text string for the cell.</param>
''' <param name="alignment">Alighnment for the text string.</param>
''' <param name="textfont">The font used for the text string.</param>
''' <param name="border">True to show the cell border. False to hide the cell border.</param>
''' <param name="backcolor">The background color of the cell.</param>
''' <param name="padtop">The amount of padding on the top of the text string.</param>
''' <param name="padbottom">The amount of padding on the bottom of the text string.</param>
''' <param name="padleft">The amount of padding on the left of the text string.</param>
''' <param name="padright">The amount of padding on the right of the text string.</param>
Public Function getCell(ByVal text As String, ByVal alignment As Integer, ByVal textfont As Its.Font, ByVal border As Boolean, ByVal backcolor As Its.BaseColor, ByVal padtop As Single, ByVal padbottom As Single, ByVal padleft As Single, ByVal padright As Single) As Its.pdf.PdfPCell
Dim cell As New Its.pdf.PdfPCell(New Its.Phrase(text, textfont))
cell.BackgroundColor = backcolor
cell.PaddingLeft = padleft
cell.PaddingRight = padright
cell.PaddingTop = padtop
cell.PaddingBottom = padbottom
cell.HorizontalAlignment = alignment
If Not border Then cell.Border = Its.pdf.PdfPCell.NO_BORDER
Return cell
End Function
End Class
If you say it can`t be done then i`ll try it

I just reinstalled and this is the question that show "You have made changes to your photo library using a newer version of iPhoto. Do you want to quit and use the latest version of iPhoto, or do you want to create a new photo library?" what do i do next

I just reinstalled and this is the pop up that shows "You have made changes to your photo library using a newer version of iPhoto. Do you want to quit and use the latest version of iPhoto, or do you want to create a new photo library?" what do i do next? it just keeps popping up and loading but only gives a quit button?

Update it.
How old is your Mac? If it's very recent you need to update via the App Store
If you purchased at the App Store you need to update via the App Store
Otherwise you update via Softare Update
Regards
TD

Everytime i try to open my Firefox i get a window that pops up asking me which browser i want to use to open it. After choosing Firefox it asks to run a C:/Program Files (x86)/Mozilla Firefox/firefox.exe.

Every time i try to open my Firefox i get a window that pops up asking me which browser i want to use to open it. After choosing Firefox it asks to run a C:/Program Files (x86)/Mozilla Firefox/firefox.exe. But my search bar says file:///C:/Program Files (x86)/Mozilla Firefox/firefox.exe. Never seen anything like this, half tempted to stop using Mozilla for this sole fact. PLEASE someone help me.

Same error message, I disabled tab mix and made sure I only have the newest version of Java, restarted firefox, now it seems to be fine no error yet on Pogo games or pictures upload to ebay which were the biggest problems besides hanging. I had also had disabled AVG secure search yesterday but that did not solve the issue. Now I will try to add back in AVG search...I have very few adds ons, also the note embedded about re- installing a toolbar went away, my old one did not work with FF4, so I installed Yahoo toolbar but the message still did not go away until I applied this fix. Hopes this helps someone..

HT5114 I lost my iphone 5 without signing out my account but I have bought another one. How can I make sure that the person in possesion of the phone is not using my account to make purchases? ?

I lost my iphone 5 without signing out my account but I have bought another one. How can I make sure that the person in possesion of the phone is not using my account to make purchases? ?

Thanks for your prompt response... will changing my password also stop the authomatic download of my new applications and music from downloading to the stolen phone?

How to make mouseover effect text show image in popup window or tooltip?

I am trying to display a popup image in a new window when the mouse moves over some text. Or perhaps, the image could display in a tooltip when the mouse moves over some text.
However, I have achieved the functionality of an image appearing above the text when the mouse moves over some text. This is how I did this:
I put this code into the Page HTML Header:
<script type="text/javascript">

</script>
I created a region and put this in the Region's Title field:
{div onmouseover="setFirstChildImgDisplay(this,'inline')" onmouseout="setFirstChildImgDisplay(this,'none')">Check out Page 1 here <img src="#WORKSPACE_IMAGES#DGNR Preview Page 1.bmp" alt="Page 1 Preview" style="display:none;">{/div}
I am thinking that I should not have all of this code in the Region's Title field. But, I don't know where else to put it in APEX.
So my questions are:
1. how to get an image to display in a popup window or as a tooltip when the mouse is moved over some text?
2. where should the {div} content be placed in APEX, if not in the Title field?
Please note that I used '{' & '}' instead of '<' & '>' just so the div would display in this post.
Also, I would like to give credit to this website because this is where I found out how to do what I have provided above.
http://forums.devshed.com/web-design-help-2/mouseover-effect-text-shows-image-321876.html
Thank you in advance,
Maggie

It's just an image map. Play with the settings. Here's a shape layer making a hole in the water and adding a bit of color.

Pop up a window to show images

Hi, I am trying to show images when the user rolls the mouse
over the image but I want to show them as a pop up window only when
the user is on the image.
Any ideas how can I handle this? I will have variety of
images and want the same behavior for all of them.

mouseOver and mouseOut event functions for the images.

How to block popup windows that opens up on clicking a link?

Hi,
How to block pop-up windows that opens up when a link is clicked? The feature in IE is to set the Blocking level as 'High: Block all pop-ups (Ctrl + Alt to override)' in Pop-up Blocker settings.
Is there a similar feature in Mac?
Thanks & appreciate the support

In the menu bar, Safari > Preferences > Security > Web Content
Some popups will not be blocked by this method, but blockable popups will be.

The video tutorial window that shows when photoshop is launched is TOO SMALL. Can it be maximized??

The "Welcome" window that opens when PS CC 2014 is launched show the option to playa specific vidieo tutorials. However, that window in not adjustable and is frequently too small to see exactly what the person is actually doing. Can the video be enlarged?
There are other secondary videos that can be watched in that same window. These other videos are really quite tiny, actually. I can't see at all what the person is doing. I think it would be nice to be able to enlarge the videos presented within the Welcome window that opens with PS CC 2014. Is anyone else having this problem??
Thanks,
Chick

I am aware of the above links; they do not appear to contain the same, most recent videos containing the most recent updates that open in Photoshop when Photoshop is updated, however.
I think having these videos discussing the most recent updates immediately available in Photoshop is more timely and convenient. but again, I wonder why the video window is so small. Why was that considered good form and even helpful?
Thank you.
Chick

How to retrieve a window that is mostly out of the desktop view?

General:
I have a window that is only partially visible because it's in the upper right corner of my desktop. I haven't been able to retrieve it.
Detail:
I have an application that I launch frequently and use with no problem.
The application has a popup that is invoked by me. This popup window was at some point or another dragged to the upper most corner of my desktop so that the title bar is not even visible anymore. Because of this, i cannot drag and retrieve this window. This is my problem, this child window has been pretty much orphaned to this upper section and can't be pulled back to a usable region.
My desktop resolution is set to 1920x1200 and hitting F5 to show all apps only momentarily pulls it to the center of my desktop.
Uninstalling and re-installing this application has not helped.
Any ideas or suggestions?

This of course shouldn't happen - it shouldn't be possible to move the window above the screen.
Possible workaround:
Ensure that the rogue window is the frontmost in the application.
Open the AppleScript Editor, and paste the following into it:
tell application "XXXXX"
activate
set the bounds of window 1 to {4, 93, 800, 500}
end tell
Enter the name of the application as it appears on the application's icon where I have XXXXX
Press the 'run' button
or save the script as an application (and keep in case it happens again!)

How to construct a window that shows images in a continuous rotation on a webpage using flash

Similar Messages

Maybe you are looking for