Pop up in configurator ( CU50 and VA01)

Hi,
I want to give a pop up as an information to user in configurator ( CU50 and VA01) whenever user enters value for characteristices beyond the permissible limit. Please advice.

hi,
Include MV45AFZZ
you can write code in userexit_move_field_to_vbkd
Example:-
FORM userexit_move_field_to_vbkd.
CALL FUNCTION 'CREDIT_EXPOSURE'
 EXPORTING
 kkber = vbak-kkber
 kunnr = vbak-kunnr
 IMPORTING
 sum_opens = zoblig.
 IF zoblig IS NOT INITIAL.
 zoblig = zoblig * -1.
 IF *vbak-netwr < zoblig.
 IF vbkd-zterm EQ 'C012'.
 new_zterm = 'C001'.
 ELSEIF vbkd-zterm EQ 'C013'.
 new_zterm = 'C017'.
 ENDIF.
 CONCATENATE 'Payment terms changed to ->> ' space new_zterm '.' INTO popmsg.
 CALL FUNCTION 'POPUP_TO_CONFIRM_STEP'
 EXPORTING
 defaultoption = 'Y'
 textline1 = popmsg
 textline2 = 'Do you want to proceed ?'
 titel = 'Payment Terms changed'
 IMPORTING
 answer = l_answer
 EXCEPTIONS
 OTHERS = 1.
Edited by: Krupaji on Feb 23, 2010 6:11 AM

Similar Messages

POP UP in Configurator / CU50

Hi,
I want to give a pop as an information to user in configurator ( CU50 and VA01) whenever user enters value for characteristices beyond the permissible limit. Please advice.

Hello,
you should use characteristics values dependencies (refer to the SAP library under "SAP ERP central component --> Logistics --> Logistics - General --> Variant configuration --> Dependencies --> Constraints"). Here you can find the way to restrict the allowed values of a characteristic: I'm not sure if you can trigger a pop-up, but probably under certain conditions the system will trigger inconsistencies in the configuration or a message explaining that the enterd value is not allowed.
Hope to be useful.
Best regards,
Andrea

I have just upgraded to PSE 12 and Premier E 12, and tried to installed many times. The pop up says "Configuration Error"; contact Adobe Tech Support(?); and "mention error code 1"! Help please!

I have just upgraded to PSE 12 and Premier E 12, and tried to installed many times. The pop up says "Configuration Error"; contact Adobe Tech Support(?); and "mention error code 1"! Help please!
Install appeared to run okay up to,, and including "shared Technologies"....

Troubleshoot installation | Photoshop Elements, Premiere Elements | Windows

OS X 10.4.11 Server - configured name and reverse DNS do not match / DNS

Hi all,
I have looked for similar posts but all seem to have different scenarios, hoping to get an answer from someone more experienced than myself before I do anything silly.
Help much appreciated!
Scenario:
We run a 10.4.11 OS X Server on an XServe, hosted at an ISP. ISP provides all DNS services, incl. the reversed DNS entry.
I am currently only running the following services (based on the display in ServerAdmin):
AFP
Firewall
iChat
Mail
QuickTimeStreaming
Web
All others (incl. DNS) are grayed out. (As ISP instructed us not to add a DNS service on our box, that's "normal" according to my experiences with dedicated /co-location server hosting).
We never used changeip after the initial setup, meaning the server's
Current Hostname = somename.local and
DNS Hostname = mail.ourdomainname.net
So in system.log I find this re-occuring entry:
Jul 8 11:41:22 somename servermgrd: servermgr_dns: configured name and reverse DNS name do not match (somename.local != mail.ourdomainname.net), various services may not function properly - use changeip to repair and/or correct DNS
Finally, my question:
As Mail and Web services etc. are currently running OK from what I can tell,
1) do I HAVE to change this at all?
2) Would it be much better / why?
3) Could I change this using the following command
(111.11.111.1 indicating the server's IP address)
changeip 111.11.111.1 111.11.111.1 somename.local mail.ourdomainname.net
4) without running a DNS server on the machine, i.e. DNS service is not required for this to work?
5) obviously I want to be able to use Server Admin after I issue this command...
6) can I fall back easily in case this would screw it up, or is there no risk whatsoever doing this in my case?
THANK YOU so much for any help!

Hi Jonas
If port 443 is already being used on the same box as KMS then it will complain and probably not start the service? I've seen this with LDAP port 636. This is when Kerio is installed on a server configured as an OD Master. Clearly the port can't be used by both servers.
It might be easier to change the port your sites are currently using to something else? Although don't do anything yet. Pose the question to Kerio Support and see what advice they offer.
Yes moving the mail to a local folder on the mail client will do it.
Is Kerio going on the same box? If its a different box (presumably different IP address?) Then what you can do is to port forward to the new server's IP address instead of disabling it. This way while you are bringing the new server on line users can still send mail right up until the time you give instructions on changing their inbound/outbound mail server details. Of course they won't be able to receive but if you time it right they may not even get an error message? Depends on what their schedules are.
If it was me I would choose IMAP every time. As the mail admin you have full control and a central location for easy backup. KMS has a built in archiving feature that makes this a simple process. This is an easier option than going round individual client machines and making sure mail held locally in POP accounts are backed up. Besides there is always someone who falls through the loop and I'm not taking into account drive failures. It makes good sense anyway as there is talk of legislation being introduced to make this a requirement for businesses who run their own mail servers. This is certainly true for certain parts of the US and what usually happens there is generally taken up in the UK and most parts of Europe.
Kerio's WebMail Client means users don't even have to have their own computer. Just as long as they have access to one that has access to the internet they can send/receive mail. No need for dedicated mail applications such as Apple Mail, Thunderbird, Entourage etc. How mail is uses remains consistent for all users.
Yes. I did this not so long ago with Leopard's built in Mail Server. I sent an e-mail defining a time when no inbound mail would be received. Disabled port forwarding for SMTP port 25 and approx 30 minutes after that another mail stating no outbound mail should be sent. Once everything was swopped over (we were changing from a G4 10.4 server to a G5 10.5 Server) port 25 was enabled, new server brought online and everyone was mailing again with no appreciable downtime.
These boxes were to have the same IP address hence the slightly different approach.
Does this help?
Tony

A message is popping up on the ipad and it is not responding to my touch?? what should i do?? help!!

amessage is popping up on the ipad and it is not responding

A persistent, flashing amber light indicates that any of the several potential conditions may require your attention:
The base station has not yet been configured because it is new, or the reset switch has been set.
You have selected a security configuration that is not recommended.
One of several other conditions, such as a disconnected Ethernet cable or invalid IP address has been detected.
(ref: http://docs.info.apple.com/article.html?artnum=305101)
If you run the AirPort Utility, it will show an amber circle on the summary page next to the area(s) causing the problem. Click on this amber circle and it should provide an explanation.
Please post back your results.

How to configure email and calendar to use my Yahoo mail box

Hello,
Please can someone help me to configure email and calendar sun microsystem edition on solaris 10 to access and send email through my yahoo inbox.
I have tried configure it with yahoo POP and SMTP address but still i am receiving error message fetching the mail from the server.
Yahoo Incoming Mail Server (POP3) - pop.mail.yahoo.com (port 110)
Yahoo Outgoing Mail Server (SMTP) - smtp.mail.yahoo.com (port 25)
Thanks

Hi,
Creating E-mail transport:
http://help.sap.com/saphelp_nw04/helpdata/en/36/eacfb72888e04eaf523f7236c0892f/frameset.htm
also do SMTP confiduration:
http://help.sap.com/saphelp_nw04/helpdata/en/af/73563c1e734f0fe10000000a114084/frameset.htm
Activate Calender Repository
Goto System Admin>System config>KM>Content management>Repository managers>Calendar Repository>New
Calendar Repository Manager
http://help.sap.com/saphelp_nw04/helpdata/en/9b/4b21436ed70448bf689c5f5c79dea1/frameset.htm
Rewars points if its udeful
Regards,
Senthil K.

"Are you sure you want to shut down your computer?" prompt pops up for no reason and continues to pop up after selecting Cancel. How can I stop this?

"Are you sure you want to shut down your computer?" prompt pops up for no reason and continues to pop up after selecting Cancel. How can I stop this?
Mac Pro. OS 10.6.8

Then I suggest you read this thread regarding the 30" Apple Cinema Display and that particular message pop up... several possible causes... common denominator, the display.
http://forums.macrumors.com/showthread.php?t=617367

When my husband set up his new iPhone I read a message wrong when it popped up on my phone and now our messaging is synced. Is it because we have the same apple ID? Do we need to change that?

When my husband set up his new iPhone I read a message wrong when it popped up on my phone and now our messaging is synced. Is it because we have the same apple ID? Do we need to change that?

Yes, its best to have each individual apple ids. You can also go to settings, messages, send and recieve, start new conversation from, make sure there is a check mark beside each of your own individual email, not the same one on each phone.

[SOLVED] How to configure prosody and jitsi to work together?

Hi,
I want to use prosody to connect several jitsi accounts on different computers on a LAN. I have followed the Prosody page in our wiki to set up Prosody and some user accounts. The service starts and ss -tul indicates that it is listening on the expected ports. I have created the missing key and certificate files expected by the default setup and placed them in /etc/prosody/certs.
I have created the account foo@localhost using prosodyctl adduser foo@localhost.
In jitsi I have created an XMPP account (foo@localhost) on the same host as prosody. The account appears but it fails to connect to the server. Jitsi displays error messages on the console which indicates that the server does not support TLS connections even though these are enabled in the prosody configuration file (and lua51-sec is installed).
I have tried numerous variations of disabling encryption in both prosody and jitsi but I either get the same error message or jitsi simply hangs while trying to connect to the server.
So far the only thing that I've been able to find that deals specifically with prosody and jitsi is an episode of the Linux Action Show from last year that skimps on the details of the setup. The various online documentation that I've found seems to be for an older version or Prosody (e.g. Host entries in the configuration file).
Does anyone have a similar setup working with the latest versions of Prosody and Jitsi? If so, please share your configurations.
edit
I went through the Prosody wiki page again today and managed to get it working. I think my problem was in misconfigured paths for the SSL server certificates in the VirtualHost section.
Last edited by Xyne (2014-08-13 00:35:51)

So, i tried both ways but it still didn't work.
anrxc: i didn't know i could still prevent DNS leak without privoxy. Privoxy always blocked flash animations and videos (like youtube) here. I'll try to set up this better tomorrow when i have more time.
By the way, after following your guide, i got this when executing /usr/bin/tor:
Jan 10 19:29:16.993 [notice] Tor v0.2.1.21. This is experimental software. Do not rely on it for strong anonymity. (Running on Linux x86_64)
Jan 10 19:29:16.994 [warn] Skipping obsolete configuration option 'Group'
Jan 10 19:29:16.995 [notice] Initialized libevent version 1.4.12-stable using method epoll. Good.
Jan 10 19:29:16.995 [notice] Opening Socks listener on 127.0.0.1:9050
Jan 10 19:29:16.995 [notice] Opening Socks listener on 192.168.0.1:9050
Jan 10 19:29:16.995 [warn] Could not bind to 192.168.0.1:9050: Cannot assign requested address
Jan 10 19:29:16.995 [notice] Closing partially-constructed listener Socks listener on 127.0.0.1:9050
Jan 10 19:29:16.995 [warn] Failed to parse/validate config: Failed to bind one of the listener ports.
Jan 10 19:29:16.995 [err] Reading config failed--see warnings above.
Last edited by ILoveJapaneseGirls (2010-01-10 22:00:12)

The directory service is missing mandatory configuration information, and is unable to determine the ownership of floating single-master operation roles.

We are in the process of removing a child domain from the forest and are down to two DCs. These are both Server 2008r2 sp1 servers, one physical and virtual (PDC). When I try to remove a DC (not the PDC emulator) I get the following error:
The operation failed because:
Active Directory Domain Services could not transfer the remaining data in directory partition DC=DomainDnsZones,DC=mydomain,DC=local to
Active Directory Domain Controller \\V-Svr03.mydomain.local.
The directory service is missing mandatory configuration information, and is unable to determine the ownership of floating single-master operation roles."
I have checked replication with repadmin /showrepl and all connections were successful. The dcdiag /test:kccEvent test on all servers passed.
Most DCdiag tests are successful. The only failure is on NCSecDesc when running dcdiag /test:NCSecDesc
   Testing server: Default-First-Site\DC1-DEV-OFC
      Starting test: NCSecDesc
         Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have
            Replicating Directory Changes In Filtered Set
         access rights for the naming context:
         DC=ForestDnsZones,DC=hookemup,DC=local
         ......................... DC1-DEV-OFC failed test NCSecDesc
In researching this I find "If you do not plan to add an RODC to the forest, you can disregard this error."
We have not successfully run ADprep /rodcPrep nor do we plan on having any Read-Only DCs, so I think we can ignor this error. We did try running ADprep /rodcPrep but got an LDAP error which I can duplicate if this is important.
Schema and Naming FSMOs are on a DC higher in the forest. RID, PDC, and Infrastructure FSMOs for the child domain are on the Virtual server (PDC).
Any guidance on where to go from here would be greatly appreciated as I have no more hair on my head to pull.

Ok... I ran repadmin /showreps /v again and it shows no errors
C:\>repadmin /showreps /v
Default-First-Site\DC1-DEV-OFC
DSA Options: IS_GC
Site Options: (none)
DSA object GUID: b294c59f-8b46-4133-89c5-0f30bfd49607
DSA invocationID: 1054285d-cffe-42b4-8074-e2d44adbb151
==== INBOUND NEIGHBORS ======================================
CN=Configuration,DC=mydomain,DC=local
    Default-First-Site\HESTIA via RPC
        DSA object GUID: b464fde9-29d7-4490-9582-fe9270050d50
        Address: b464fde9-29d7-4490-9582-fe9270050d50._msdcs.mydomain.local
        DSA invocationID: afea3845-9fa8-40a6-a477-84348a206348
        SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
        USNs: 16381490/OU, 16381490/PU
        Last attempt @ 2012-10-29 13:52:39 was successful.
    Default-First-Site\V-SVR03 via RPC
        DSA object GUID: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8
        Address: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8._msdcs.mydomain.local
        DSA invocationID: 45de2c10-ec8b-443d-a645-db4e0a352a23
        SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
        USNs: 114817/OU, 114817/PU
        Last attempt @ 2012-10-29 13:52:39 was successful.
    Default-First-Site\V-SVR01 via RPC
        DSA object GUID: e2f794eb-9658-4bad-b695-3d8c08f46371
        Address: e2f794eb-9658-4bad-b695-3d8c08f46371._msdcs.mydomain.local
        DSA invocationID: 07bb0fe9-bca9-46d1-92ce-308d36da478d
        SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
        USNs: 66047/OU, 66047/PU
        Last attempt @ 2012-10-29 13:52:39 was successful.
    Default-First-Site\ATHENA via RPC
        DSA object GUID: cb00a5b0-6dea-473c-bb42-19356dd9ed36
        Address: cb00a5b0-6dea-473c-bb42-19356dd9ed36._msdcs.mydomain.local
        DSA invocationID: 57313a9c-46a2-4b94-87cc-b3f91d54faed
        SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
        USNs: 8098197/OU, 8098197/PU
        Last attempt @ 2012-10-29 13:52:39 was successful.
CN=Schema,CN=Configuration,DC=mydomain,DC=local
    Default-First-Site\ATHENA via RPC
        DSA object GUID: cb00a5b0-6dea-473c-bb42-19356dd9ed36
        Address: cb00a5b0-6dea-473c-bb42-19356dd9ed36._msdcs.mydomain.local
        DSA invocationID: 57313a9c-46a2-4b94-87cc-b3f91d54faed
        SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
        USNs: 8097482/OU, 8097482/PU
        Last attempt @ 2012-10-29 13:52:39 was successful.
    Default-First-Site\V-SVR01 via RPC
        DSA object GUID: e2f794eb-9658-4bad-b695-3d8c08f46371
        Address: e2f794eb-9658-4bad-b695-3d8c08f46371._msdcs.mydomain.local
        DSA invocationID: 07bb0fe9-bca9-46d1-92ce-308d36da478d
        SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
        USNs: 65239/OU, 65239/PU
        Last attempt @ 2012-10-29 13:52:39 was successful.
    Default-First-Site\V-SVR03 via RPC
        DSA object GUID: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8
        Address: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8._msdcs.mydomain.local
        DSA invocationID: 45de2c10-ec8b-443d-a645-db4e0a352a23
        SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
        USNs: 114149/OU, 114149/PU
        Last attempt @ 2012-10-29 13:52:39 was successful.
    Default-First-Site\HESTIA via RPC
        DSA object GUID: b464fde9-29d7-4490-9582-fe9270050d50
        Address: b464fde9-29d7-4490-9582-fe9270050d50._msdcs.mydomain.local
        DSA invocationID: afea3845-9fa8-40a6-a477-84348a206348
        SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
        USNs: 16381373/OU, 16381373/PU
        Last attempt @ 2012-10-29 13:52:39 was successful.
DC=ForestDnsZones,DC=mydomain,DC=local
    Default-First-Site\V-SVR01 via RPC
        DSA object GUID: e2f794eb-9658-4bad-b695-3d8c08f46371
        Address: e2f794eb-9658-4bad-b695-3d8c08f46371._msdcs.mydomain.local
        DSA invocationID: 07bb0fe9-bca9-46d1-92ce-308d36da478d
        SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
        USNs: 66295/OU, 66295/PU
        Last attempt @ 2012-10-29 13:57:48 was successful.
    Default-First-Site\ATHENA via RPC
        DSA object GUID: cb00a5b0-6dea-473c-bb42-19356dd9ed36
        Address: cb00a5b0-6dea-473c-bb42-19356dd9ed36._msdcs.mydomain.local
        DSA invocationID: 57313a9c-46a2-4b94-87cc-b3f91d54faed
        SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
        USNs: 8098367/OU, 8098367/PU
        Last attempt @ 2012-10-29 13:58:13 was successful.
    Default-First-Site\V-SVR03 via RPC
        DSA object GUID: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8
        Address: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8._msdcs.mydomain.local
        DSA invocationID: 45de2c10-ec8b-443d-a645-db4e0a352a23
        SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
        USNs: 115032/OU, 115032/PU
        Last attempt @ 2012-10-29 13:58:25 was successful.
    Default-First-Site\HESTIA via RPC
        DSA object GUID: b464fde9-29d7-4490-9582-fe9270050d50
        Address: b464fde9-29d7-4490-9582-fe9270050d50._msdcs.mydomain.local
        DSA invocationID: afea3845-9fa8-40a6-a477-84348a206348
        SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
        USNs: 16381653/OU, 16381653/PU
        Last attempt @ 2012-10-29 13:58:34 was successful.
DC=mySUBdomain,DC=local
    Default-First-Site\V-SVR03 via RPC
        DSA object GUID: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8
        Address: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8._msdcs.mydomain.local
        DSA invocationID: 45de2c10-ec8b-443d-a645-db4e0a352a23
        SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
        USNs: 114871/OU, 114871/PU
        Last attempt @ 2012-10-29 13:54:02 was successful.
DC=DomainDnsZones,DC=mySUBdomain,DC=local
    Default-First-Site\V-SVR03 via RPC
        DSA object GUID: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8
        Address: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8._msdcs.mydomain.local
        DSA invocationID: 45de2c10-ec8b-443d-a645-db4e0a352a23
        SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
        USNs: 114017/OU, 114017/PU
        Last attempt @ 2012-10-29 13:52:39 was successful.
DC=mydomain,DC=local
    Default-First-Site\V-SVR03 via RPC
        DSA object GUID: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8
        Address: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8._msdcs.mydomain.local
        DSA invocationID: 45de2c10-ec8b-443d-a645-db4e0a352a23
        SYNC_ON_STARTUP DO_SCHEDULED_SYNCS
        USNs: 114017/OU, 114017/PU
        Last attempt @ 2012-10-29 13:52:39 was successful.
    Default-First-Site\HESTIA via RPC
        DSA object GUID: b464fde9-29d7-4490-9582-fe9270050d50
        Address: b464fde9-29d7-4490-9582-fe9270050d50._msdcs.mydomain.local
        DSA invocationID: afea3845-9fa8-40a6-a477-84348a206348
        SYNC_ON_STARTUP DO_SCHEDULED_SYNCS
        USNs: 16381614/OU, 16381614/PU
        Last attempt @ 2012-10-29 13:56:52 was successful.
    Default-First-Site\V-SVR01 via RPC
        DSA object GUID: e2f794eb-9658-4bad-b695-3d8c08f46371
        Address: e2f794eb-9658-4bad-b695-3d8c08f46371._msdcs.mydomain.local
        DSA invocationID: 07bb0fe9-bca9-46d1-92ce-308d36da478d
        SYNC_ON_STARTUP DO_SCHEDULED_SYNCS
        USNs: 66325/OU, 66325/PU
        Last attempt @ 2012-10-29 13:58:34 was successful.
    Default-First-Site\ATHENA via RPC
        DSA object GUID: cb00a5b0-6dea-473c-bb42-19356dd9ed36
        Address: cb00a5b0-6dea-473c-bb42-19356dd9ed36._msdcs.mydomain.local
        DSA invocationID: 57313a9c-46a2-4b94-87cc-b3f91d54faed
        SYNC_ON_STARTUP DO_SCHEDULED_SYNCS
        USNs: 8098385/OU, 8098385/PU
        Last attempt @ 2012-10-29 13:58:38 was successful.

TS3212 i am trying to download itunes 10.7. i have windows vista 32-bit. when i click on download. the pop up window comes up and ask to save or cancel, and then the webpage says thank you for downloading. it hasn't downloaded it. what can i do to fi

i am trying to download itunes 10.7. i have windows vista 32-bit. when i click on download. the pop up window comes up and ask to save or cancel, and then the webpage says thank you for downloading. it hasn't downloaded it. what can i do to fix this?

I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

I have been trying to update my apps but i recieve a pop up on my iphone and ipod that my apple id has been disabled.

i have been trying to update my apps but i recieve a pop up on my iphone and ipod that my apple id has been disabled. i have reset my password and made sure that everything in my settings are up to date with the new password. but the problem still persists. i have done what the support link has told me i have even logged out and logged back in but still no positive results. please help

Might be an address formatting issue with your iTunes account records. See http://support.apple.com/kb/TS1646.

Front end Backend Modeling Configuration Reporting and Extraction.

Hi..All
Can Any one plz explain the terms "Front end","Back end" related to Modeling,Configuration,Reporting and Extraction.
Thanks & Regards
Jonn
[email protected]

Hi,
Frontend is the reporting aspect, i.e Workbooks, queries, Web reporting, Crystal reports, etc.
Its called the frontend as that's what the users see and they don't see what goes on in the 'backend' i.e Config and Extraction, data manipulations, etc.
Modeling is used to design the cube, ODS, etc. Also modeling concepts can be used to design frontend queries as well.
Cheers,
Kedar

BOM explosion in sales order for configurable materials and variants

Hi,
I have these materials:
A: configurable material (header)
B: variant material (header)
C: configurable material 1 (position)
D: configurable material 2 (position)
E:variant material 1 (position)
F:variant material 2 (position)
I can in the sales order explode in this way the BOM (using SD01 application in the position type of the header material):
1) A --> C+D
2) B --> E+F
while I can't make the explosion in this way: A --> EF and A --> CE
is this possibile? I want to make an explosion of a BOM for a configurable material and having variants material as sons, or having mix sons (one configurable and one variant)
Thank you
Sandra

Hi Sandara,
Just check the BOM in cs03 u have maintained !!! If u have maintain the variant material there in the config mat BOM with object dependencies than u can explode !!!!
Please let me knwo if u any query and also if u elabore more than will help u out

How to authorization sales office and sales group in VA21 and VA01 t-code

I need to authorization sales office and sales group in va21,va22,va23 and va01, va02, va03 to control users access the sales order.
I found some articles how to resolve this problem.I have created new authorization object Z_VBAK_ VKO, and add these fields to the object: VKORG: Sales Organization, VTWEG:Distribution Channel, SPART: Division, VKBUR:Sales Office, VKGRP: Sales Group, AUART:Sales Document Type, ACTVT:Activity
I have add the object Z_VBAK_VKO to va01, va02, va03 in SU24 translation.
I test the authorization , but fail, va01 and va02 do not check the authorization.
Why? what can i do? please help me .
thanks

Dear Wu
I think you are using the concept of Master Roles and Derived Roles.If ur using then create a master role and derived role for the authorisation group you want. And in the derived role assign the specifics to the respective logins ID. If you want to attach the authorisation to the T-Codes Va01 or VA21 etc then you have to use Exit.
Correct me if i am wrong.
Regards
Jyotsana

Pop up in configurator ( CU50 and VA01)

Similar Messages

Maybe you are looking for