[SOLVED] How to configure prosody and jitsi to work together?

Hi,
I want to use prosody to connect several jitsi accounts on different computers on a LAN. I have followed the Prosody page in our wiki to set up Prosody and some user accounts. The service starts and ss -tul indicates that it is listening on the expected ports. I have created the missing key and certificate files expected by the default setup and placed them in /etc/prosody/certs.
I have created the account foo@localhost using prosodyctl adduser foo@localhost.
In jitsi I have created an XMPP account (foo@localhost) on the same host as prosody. The account appears but it fails to connect to the server. Jitsi displays error messages on the console which indicates that the server does not support TLS connections even though these are enabled in the prosody configuration file (and lua51-sec is installed).
I have tried numerous variations of disabling encryption in both prosody and jitsi but I either get the same error message or jitsi simply hangs while trying to connect to the server.
So far the only thing that I've been able to find that deals specifically with prosody and jitsi is an episode of the Linux Action Show from last year that skimps on the details of the setup. The various online documentation that I've found seems to be for an older version or Prosody (e.g. Host entries in the configuration file).
Does anyone have a similar setup working with the latest versions of Prosody and Jitsi? If so, please share your configurations.
edit
I went through the Prosody wiki page again today and managed to get it working. I think my problem was in misconfigured paths for the SSL server certificates in the VirtualHost section.
Last edited by Xyne (2014-08-13 00:35:51)

So, i tried both ways but it still didn't work.
anrxc: i didn't know i could still prevent DNS leak without privoxy. Privoxy always blocked flash animations and videos (like youtube) here. I'll try to set up this better tomorrow when i have more time.
By the way, after following your guide, i got this when executing /usr/bin/tor:
Jan 10 19:29:16.993 [notice] Tor v0.2.1.21. This is experimental software. Do not rely on it for strong anonymity. (Running on Linux x86_64)
Jan 10 19:29:16.994 [warn] Skipping obsolete configuration option 'Group'
Jan 10 19:29:16.995 [notice] Initialized libevent version 1.4.12-stable using method epoll. Good.
Jan 10 19:29:16.995 [notice] Opening Socks listener on 127.0.0.1:9050
Jan 10 19:29:16.995 [notice] Opening Socks listener on 192.168.0.1:9050
Jan 10 19:29:16.995 [warn] Could not bind to 192.168.0.1:9050: Cannot assign requested address
Jan 10 19:29:16.995 [notice] Closing partially-constructed listener Socks listener on 127.0.0.1:9050
Jan 10 19:29:16.995 [warn] Failed to parse/validate config: Failed to bind one of the listener ports.
Jan 10 19:29:16.995 [err] Reading config failed--see warnings above.
Last edited by ILoveJapaneseGirls (2010-01-10 22:00:12)

Similar Messages

[SOLVED] Can't get ccache and colorgcc to work together

Hi all,
Has anyone figured out how to get ccache and colorgcc to work at the same time? I can only get one or the other, but not both.
If I put them both in the path, with colorgcc first, then "g++" invokes colorgcc, which then calls /usr/bin/g++, skipping ccache.
If I put ccache first in the path instead, then running "g++" invokes ccache, which then calls /usr/bin/g++, skipping colorgcc for some reason.
Putting colorgcc back to first in the path, then editing /etc/colorgcc/colorgccrc means I can set the compiler paths to point to ccache. However then running "g++" invokes colorgcc, which calls ccache, but then ccache seems to call colorgcc again, which calls ccache, which calls colorgcc, etc, etc.
Perhaps I'm missing something, but I can't see how you tell ccache where the compiler binaries are located, as this seems to be the problem - ccache autodetects them, and always seems to pick the ones I don't want!
Any suggestions?
Last edited by Malvineous (2011-05-03 01:29:48)

Ha, ok, as usual as soon as I post in a forum I stumble across the answer. Turns out there's a CCACHE_PATH environment variable you can use to tell ccache where to look for the real compilers. It doesn't seem to work setting this to point to colorgcc, but putting only colorgcc in the path, editing /etc/colorgcc/colorgcc to point to ccache, then setting CCACHE_PATH=/usr/bin seems to do the trick...
But if there's a better way please let me know!

[SOLVED] how do hosts.allow and hosts.deny work?

I understand the basic concepts of hosts.allow and hosts.deny, but I am interested in how it works. What actually blocks access to the services? Do they do it themselves? Or it is something in the kernel that does it?
For example, if I have this in my hosts.allow:
sshd:all
#mysqld: all
And this is my hosts.deny:
ALL: ALL: DENY
This will result in people being able to connect to sshd but not mysqld. Are sshd and mysqld programmed to read these hosts.allow and hosts.deny files? Or is there something stopping the connection before it even gets to the daemon?
The hosts.allow and hosts.deny man pages refer to tcpd, but it is not running on my system. Also, hosts.allow and hosts.deny never show up in the output of `lsof`. hosts.allow and hosts.deny belong to the tcp_wrappers package, but there is nothing else in the package that illuminates my question.
Last edited by partner55083777 (2010-03-15 12:35:51)

Thanks guys.
However most common network service daemons today can be linked against libwrap directly.
Sure enough,
$ ldd /usr/sbin/sshd
linux-vdso.so.1 => (0x00007123451ff000)
libwrap.so.0 => /usr/lib/libwrap.so.0 (0x00007fffbd6d000)
libpam.so.0 => /lib/libpam.so.0 (0x00007f99765f1000)
$
Here is also a little bit more information about libwrap:
http://en.wikipedia.org/wiki/Libwrap
Last edited by partner55083777 (2010-03-15 20:03:11)

How to configure modem and connect internet and play mp3

Hello friends
I am using sun solaris 8 intel edition .
I am using windowsXP,RedHat Linux and Sun Solaris 8 Intel Editon. I am using Internet on windows and linux platform but i cannot find any device configure tool in solaris 8 , So Please tell me how to configure modem and commands for connection internet and It is possible to play mp3 songs on solaris
Thaking in Advance
Piyush Patel
PI Solution

Look at the manual for pppd. Also take a look at OSS for sound card support (http://www.opensound.com) and xmms for your MP3 audio (http://www.xmms.org)

How to configure listener and tnsnames.ora on 10g version

how to configure listener and tnsnames.ora on 10g version

If you are on linux platform, on command prompt execute netmgr and configure listener fromt there. Or go to $oracle_home/network/admin/listner.ora write the following
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /u01/app/oracle/product/10.2.0/db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
For tnsnames.ora write the following
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
)

Trying to make sense on how and if RBAC and MOAC could work together

Hi All,
We upgraded from 11.5.9 to R12.1.1 in Nov-2009.
Since the time we have upgraded to R12, we are trying to make sense as to how and if RBAC and MOAC could work together.
The use case is as below:
*11i Days*
US Accountant - accesses ‘AR superuser US’
Canada Accountant - accesses ‘AR superuser Canada’
France Accountant - accesses ‘AR superuser France’
Spain Accountant - accesses ‘AR superuser Spain’
North America Financial controller - Switches between 'AR superuser US' and 'AR superuser Canada'
European Financial controller - Switches between 'AR superuser France' and 'AR superuser Spain'
CFO - Switches amongst 'AR superuser US','AR superuser Canada', 'AR superuser France' and 'AR superuser Spain'
Now in R12- (Wow there is MOAC!)
US Accountant - accesses ‘AR superuser US’
Canada Accountant - accesses ‘AR superuser Canada’
France Accountant - accesses ‘AR superuser France’
Spain Accountant - accesses ‘AR superuser Spain’
North America Financial controller - accesses 'AR superuser North America'
European Financial controller - accesses 'AR superuser Europe'
CFO - accesses 'AR superuser Global'
With R12 now there are 3 additional responsibilities.
We have (like most of the other EBS customers) custom responsibilities and so there is maintenance.
More the responsibilities more the maintenance...More the SOD issues.
To prevent creating new responsibilities, we could use the ‘MO: Security Profile’ at the user level BUT that would mean that now these users would have access to multiple OUs for all the responsibilities...that is not good.
What-If: There is only 1 responsibility 'AR SuperUser' and somehow using RBAC, roles are created and assigned to users so that they only have access to specific OUs.
Apparently, MOAC works based on MO:Security Profile that is something that RBAC cannot control.
Am I missing something...RBAC seems to be no good?
In PROD(R12.1.1)- We are expecting that we would end up creating 100+ new responsibilities since we have many shared services users and they all want to benefit from MOAC...Appreciate, if you could please help us understand how we can prevent these 100+ new responsibilities from getting created?
Thanks
Rahul Gupta

Hi Rahul,
your question is quite interesting. I did a lot in the area of RBAC to understand the background.
RBAC mainly allows you to
- group responsibilities
- build hierarchies
- manage low level data access (via VPD)
- Grant permissions (new with R12)
Unfortunately you can't control profile options via RBAC. Therefore, the MO:Sec Profile has to stay on responsibility level. I was playing with the alternative to put this profile option on user level, but also in this case the number of maintenance steps will stay the same.
I would like to share a document with you, what's your email (or search my name in linkedin)?
kr
Volker Eckardt

Im stuck in an endless loop to restore my i touch. How do i stop and make it work.

im stuck in an endless loop to restore my i touch. How do i stop and make it work.

ive been struggling with the same thing myself. i was told to rename the drive that my ipod was on ie. F to Z and then reboot and try the restore process in itunes again but make sure your ipod is plugged in the entire time. im about to try this myself. goodluck!

How the sound - microphone - and bluetooth devices works in Windows 8.1 Client Hyper-V

How the sound - microphone - and bluetooth devices works in Windows 8.1 Client Hyper-V
I would like to get some resources about detailed information on the subject above.
Any help would be greatly appreciated.
Thank you,
carloss

check this
Hyper-V in Windows Server 2012 R2 Client Hyper-V Enhanced Session Mode in Windows 8.1
Starting with Hyper-V in Windows Server 2012 R2, Hyper-V can now redirect local resources to a virtual machine session through Virtual Machine Connection tool. The enhanced session mode connection uses a Remote Desktop Connection session via the virtual
machine bus (VMBus), so no network connection to the virtual machine is required
https://technet.microsoft.com/en-us/library/dn282274.aspx

Can I make my iMAC and MAC book work together?

I've done the set up to join other networks.....trying to get my desktop and laptop to work together.
Is it even possible for them to keep updated info regardless of which one I enter it on?
If so, please tell me how.
Thank you
Diane

There are various programs like Dropbox that can help you sync two computers over the network, but I still find them kind of a hassle to set up and maintain.
I simply make my laptop the primary storage, and I turn on File Sharing on my laptop. Then on my desktop I just log into my laptop and open files directly over the network. On my desktop I have aliases to my laptop folders so I can get into them in a couple clicks.

My colleague and I are working together (from separate MacBooks) to create an iBook for our students. We plan to work on sections separately and combine later. Must we use the SAME template to do so?

My colleague and I are working together (from separate MacBooks) to create an iBook for our students. We plan to work on sections separately and combine later. Must we use the SAME template to do so?

I'm not sure iBA reacts well to this type of editing, not to mention the cumbersome nature of trying to bring everything together in general.
I'd suggest a workflow where one book is handed off, instead. That, or, let the individuals involved create their basic content in Pages, then when ready, use iBA's Insert Pages Chapters menu to string them together. Best to work in a linear fashion and avoid adding/removing/adding/moving portions, etc.
If you must have separate authors, be sure to use the identical template and have them all properly trained up before going forward - trying this as a learning experience may result in an off-putting experience otherwise , with more time spent on chasing knots than on expressing writing skills, etc.

How can I have two VI that works together?

How can I mix two VI that work together ? Does it work with Flat Sequence Structure or something's?

I've always wondered about that bracket-thingy, but I've been able to get along without it, so I don't worry about it any more.
Why would you want to try to program a doubly-charged carbon ion (C++), anyway? It's just going to find an oxygen ion or aromatic ring to react with, no matter what you do. You're sure not going to steer it towards another cation without going to Fermilab or CERN (Yes, I understand they use LabVIEW there).
Cameron
To err is human, but to really foul it up requires a computer.
The optimist believes we are in the best of all possible worlds - the pessimist fears this is true.
Profanity is the one language all programmers know best.
An expert is someone who has made all the possible mistakes.
To learn something about LabVIEW at no extra cost, work the online LabVIEW tutorial(s):
LabVIEW Unit 1 - Getting Started
Learn to Use LabVIEW with MyDAQ

OWB 10gR2 : How to configure ctl and log locations for Sql*Loader mappings?

Hi all,
I'm using OWB 10gR2 to load data in tables with Sql*Loader mappings.
In my project I have a datafile module and an Oracle module.
When creating an sql*loader mapping in the oracle module, there is two properties for this mappings that I want to modify. The first is Control File Location and the second is Log File Location. Values for those properties are equal to the data file module location. When trying to change those values I can only chose "Use module configuration location".
Somebody knows how to configure those properties with different locations as the one of the flat file module?
What I want to do is to store the data file in one directory, and control file and log file in other directories.
Thank you for your help.
Bernard

Hi,
You're right, my problem is that the dropdown only show the location associated with the flat file location even if I have other file locations created in the design repository.
The good news is that I have found the solution to solve the problem :
1) Edit the file module and in tab "Data locations", add the locations you want to use for control file and log file.
2) Open configuration window of the mapping and then the dropdown for properties Control File Location and Log File Location show new locations
I have tested my mapping after changing those properties and it's working.
Bernard

How to configure oracle and ms-access db

Hi All,
I have a requirement to push data from the oracle to ms access. My oracle database is on the Unix server and ms access is on my local desktop. Is there a way to configure if so how to configure both the db? Basically I am wanted to make the ms access visible to oracle so that I can use the Heterogeneous package. Please let me know if there are any different ways.
my oracle version is
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit
ms-access 2007
Thanks in advance.

Hi,
You could use the Database Gateway for ODBC (DG4ODBC) to do this. It uses a third party ODBC driver to make the connection to MS-Access so the best option would be to install it on the Windows machine where Access is running and use the Microsoft Access driver.
Otherwise, you could install on Unix where Oracle is running but I don't think there is third party Access driver for Unix.
The following note available in My Oracle Support describes the setup on Windows -
Note.466225.1 How to Setup DG4ODBC (Oracle Database Gateway for ODBC) on Windows 32bit
You should install the latest 11.2 DG4ODBC and this note has pointers to the download sites -
Note.1083703.1 Master Note for Oracle Gateway Products
DG4ODBC can be installed standalone without an RDBMS being installed.
Regards,
Mike

[SOLVED] How to get sudo and kdesu to honor my user password?

Hi folks,
Well, I must be missing something. I think I've tried everything listed here https://bbs.archlinux.org/viewtopic.php?id=143487 and in the referenced links, but I still have the problem of my system rejecting my password for some uses of sudo and kdesu but not others. I've included my /etc/sudoers file below.
My problem may be due to screwing around with users: I started out using bruce (1000), then switched to bbraley (1001), then deleted bruce in kusers, then changed bbraley to 1000. When that created more problems without solving the original one, I switched back to 1001. I've played with adding and removing my user from groups, including creating a sudo group, making sure I am a member of wheel group, etc.
What seemed to be everyone's magic fix,
pacman -S pambase
didn't work when I tried it successfully with my bbraley password, then later, when that began failing, using the root password. pambase reinstalls, but there is no resulting change in the behavior of sudo.
Side question: Most of my experience is with kubuntu in which I never created a root user and never had any trouble having my user password work with sudo or kdesu. Is there a reason Archwiki beginners guide suggests assigning a separate root account and password?
Can anyone help?
Here's the output of
groups
root adm disk wheel log locate network video audio optical storage scanner power users nm-openconnect systemd-network bbraley sudo sddm
Here's the output of
cat /etc/group |grep `id -un`
root:x:0:bbraley
adm:x:4:root,daemon,bbraley
disk:x:6:root,bbraley
wheel:x:10:root,bbraley
log:x:19:root,bbraley
locate:x:21:bbraley
network:x:90:bbraley
video:x:91:bbraley
audio:x:92:bbraley
optical:x:93:bbraley
storage:x:95:bbraley
scanner:x:96:bbraley
power:x:98:bbraley
users:x:100:bbraley
systemd-network:x:193:bbraley
nm-openconnect:x:104:bbraley
sddm:x:619:bbraley
bbraley:x:500:
sudo:*:501:bbraley
Here's what
ls -l /etc/sudoer
yields:
-r--r----- 1 root root 2948 Mar 22 07:25 /etc/sudoers
And here's my sudoers file:
## Defaults specification
## You may wish to keep some of the following environment variables
## when running commands via sudo.
## Locale settings
# Defaults env_keep += "LANG LANGUAGE LINGUAS LC_* _XKB_CHARSET"
## Run X applications through sudo; HOME is used to find the
## .Xauthority file. Note that other programs use HOME to find
## configuration files and this may lead to privilege escalation!
# Defaults env_keep += "HOME"
## X11 resource path settings
# Defaults env_keep += "XAPPLRESDIR XFILESEARCHPATH XUSERFILESEARCHPATH"
## Desktop path settings
# Defaults env_keep += "QTDIR KDEDIR"
## Allow sudo-run commands to inherit the callers' ConsoleKit session
# Defaults env_keep += "XDG_SESSION_COOKIE"
## Uncomment to enable special input methods. Care should be taken as
## this may allow users to subvert the command being run via sudo.
# Defaults env_keep += "XMODIFIERS GTK_IM_MODULE QT_IM_MODULE QT_IM_SWITCHER"
## Uncomment to enable logging of a command's output, except for
## sudoreplay and reboot. Use sudoreplay to play back logged sessions.
# Defaults log_output
# Defaults!/usr/bin/sudoreplay !log_output
# Defaults!/usr/local/bin/sudoreplay !log_output
# Defaults!REBOOT !log_output
## Runas alias specification
## User privilege specification
root ALL=(ALL) ALL
## Uncomment to allow members of group wheel to execute any command
##%wheel ALL=(ALL) ALL
## Same thing without a password
%wheel ALL=(ALL) NOPASSWD: ALL
## Uncomment to allow members of group sudo to execute any command
%sudo ALL=(ALL) ALL
bbraley ALL=(ALL) ALL
## Uncomment to allow any user to run sudo if they know the password
## of the user they are running the command as (root by default).
Defaults targetpw # Ask for the password of the target user
ALL ALL=(ALL) ALL # WARNING: only use this together with 'Defaults targetpw'
## Read drop-in files from /etc/sudoers.d
## (the '#' here does not indicate a comment)
#includedir /etc/sudoers.d
Last edited by Bruce1956 (2015-03-28 05:16:03)

Trilby wrote:I've never used the targetpw setting, but I wouldn't be surprised if that was the problem. With that setting, if you want to run something as root (the default use of sudo) then you'd need the root password, not the user password. Comment out that setting, and the next line.
I had never used it, either, but I misread some reference and thought it might help. Since you say it causes the behaviour I'm trying to eliminate, I will get rid of it, as suggested. However, the behavior preceded my addition of this line in the file, so I don't think this will correct the problem. Edit: Removing it kept the root password from being universally required (I can now edit /etc/sudoers using my user password) and returned it to requiring it sometimes (I still need the root password to use kdesu).
As for some other distro not having a root account, that is simply impossible. There was a root account. If you didn't have the password for it, then that installation was severely crippled.
Sorry, you're right. I should have said that kubuntu does not expect users to assign a password to the root account and instead expects primary users to access that account's privileges via su, sudo, or kdesu only.
https://help.ubuntu.com/community/RootSudo
By default, the root account password is locked in Ubuntu. This means that you cannot login as root directly or use the su command to become the root user. However, since the root account physically exists it is still possible to run programs with root-level privileges. This is where sudo comes in - it allows authorized users (normally "Administrative" users; for further information please refer to AddUsersHowto) to run certain programs as root without having to know the root password.
Thanks for responding to my request for help. Any other ideas?
Edit: Here's what I keep getting that only accepts the root password, not my user password
http://s15.postimg.org/4z0o86oln/Runasroot_KDEsu.png
-- mod edit: read the Forum Etiquette and only post thumbnails http://wiki.archlinux.org/index.php/For … s_and_Code [jwr] --
Last edited by Bruce1956 (2015-03-23 04:41:06)

How to configure rz20 and dswp in solution manager ?

Hi all,
I have configured the ccms agent and ccms ping in the satellite system and all the connectivity with solution manager.
but then i haven' got the idea how to configure the template in the RZ20 and DSWP ?
Please advise on document / blog etc regarding this kind of configuration ?
Thank you and Best Regards
Fernand

Hi
check below link:
DSWP: http://help.sap.com/saphelp_smehp1/helpdata/en/8e/3ad6f807e147669036d2a6aed597aa/content.htm
RZ20: http://help.sap.com/saphelp_nw04/Helpdata/EN/17/550c404a435509e10000000a1550b0/content.htm
Thanks
Sunny

[SOLVED] How to configure prosody and jitsi to work together?

Similar Messages

Maybe you are looking for