Populate multiple records.

hi all.
i have a req where i need to look up master & populate a char in the cube.
the problem is i have more then one record for that particular combination.
i need to populate all these chars in the cube . how & wer can this be done. is der any sample routine for this.

Hi,
Write a code in end routine. In this code, check if you get multiple records for a char then append one more line in the internal table RESULT_PACKAGE. In this way you get multiple line in the cube if char has multiple values.
Thanks,
Rubal Kalra

Similar Messages

  • How to populate multiple records into 1 using addtl keyfigs

    Hi Gurus,
    Please take a look at this scenario.
    I have 3 records coming from source system.
    ex:
    key dateid startdate enddate
    c    1      d1         d2
    c    2      d3         d4
    c    3      d5         d6
    i need to populate these 3 records as one into the infoobject based on dateid.
    (dateid =1 then kf1=d1,kf2=d2;dateid =2 kf3=d3,kf3=d4 dateid = 3 kf1=d5,kf2=d6)
    i added 6 key figures ( kf1 kf2 kf3 kf4 kf5 kf6) as attributes to infoobject.The final
    record should look like the below one.
    key kf1 kf2 kf3 kf4 kf5 kf6
    c d1 d2 d3 d4 d5 d6
    Could you pls give me some thoughts on how to do this in a better way.
    Do i need to write update routine or just the formula in update rule is enough  ??
    Thanks in advance
    -dooDle

    Hi Ramesh,
    The scenario you have mentioned looks really complicated reason being, maintainance.
    Combining 3 records to one is possible in Start Routine. But it will be an expensive one.(I mean loopin)
    Pseudo code:
    LOOP AT DATA_PACKAGE.
    Check which records satisfy your criteria and fill a Temporary table. The fields will be your entire record to be appended to the fact table.
    Endloop.
    Delete your Data Package.
    populate the Temporary Internal Table onto the Data Package.
    Hope it helps.
    Regards,
    Praveen.

  • Multiple records of table from RFC to XI in single XML file

    Hi
    My Scenario is as following -->
    <b>RFC ---> Sender RFC Adapter ---> XI -
    > Rec SOAP adapter ---> Web Service</b>
    Now we need multiple records from RFC which can be put in single XML file & XI can transport the whole XML file to Web Service. All the configuration in XI, Web Service is complete & I tested my mapping which is able to accept multiple records.
    But when ABAPer is sending the records I am not getting it in XI, I checked that in message payload from RFC.
    He put the table name in TABLE tab of RFC. But not under Import Tab, as whatever he is providing under Import parameter & exporting it through report I am getting in message payload but not the table data.
    Did anyone try such scenario, can you tell me how can we achieve this.
    Pls. provide me your mail ID in case you need an attachment of the current RFC & report code & my mapping snapshot.
    Regards
    - lalit -

    Hi
    We have created the BAPI in which we are just describing the structure of the payload & which I am importing in Integration Repository.
    And we are calling this BAPI from another program using " Call function ... " command & also provinding the data in that program.
    Actually ethically ABAPers are against the idea of provinding the data into program they would like to provide it in BAPI but that won't work, you have to provide data in program which in turn populate the fields of BAPI.
    Let me know with your mail ID in case you need snapshot of function & programs.
    Regards
    - Lalit -

  • Single Form Erroneously Creating Multiple Records

    I've created a form that uses several pages, with different fields of the form on each page. The pages branch from one to the next depending on the choices made by the user, mostly using a regular select list or a radiogroup with submit. The problem I'm having is that some fields are being populated in one record on one page, and then the information entered by the user on the next page, for another column, creates a new record, so that every time a user would be finished making a complete entry into the form, multiple records have been created, with null fields in each from where those fields were populated, but in a different record. How can I make sure that only one record is created by the user each time they use this form?

    Basically the way the page is designed is that there are only three main pages the user will see. 1) The login page then 2) The main menu page, and then 3) The page where they input the information that should populate the remainder of the fields in that record in the table.
    The login page simply allows the user to access the menu page, and submits no data. The main menu page consists of 5 fields. Three of them are text fields, the fourth is a date field with a date picker. The fifth field is a radiogroup with submit that has 5 options which branch to 5 respective pages. Upon selecting an option from the radiogroup, these fields submit their data to the table and redirect the user to whichever page was designated by their choice.
    This brings up the third page. Most of these other 5 pages consist simply of 4 fields; two required select lists, one required textarea field, and one nonrequired textarea field. Anyway, the problem occurs because instead of populating the remaining fields in the same record, each page with information to submit creates a new record.
    I realize that the preceding may not be any additional relevant info., but I thought that if anything, there may be a better way to do that anyway. I thought that maybe editing the "Process" in the Page Definition could be where I need to change something, but I'm not sure how.
    Right now my "Process Point" is set as "On Submit - After Computations and Validations," and my "Run Process" is set as the default "Once Per Page Visit." These settings are the same on every page on which I have fields that submit data; however, one difference I noticed is in the process editing interface for the initial menu page, the "Name" says "Insert row into USER_INPUT (table name) with a "Type" of "PL/SQL Anonymous Block", whereas all the other pages processes are named "Process row of USER_INPUT" with a type of "Automatic Row Processing (DML)." Am I even close to where I need to be looking to find the solution to this problem? Sorry for the novel I just wrote, but if there's any additional info. I can provide, just let me know.

  • Can we create multiple records before navigation to that block

    Can we create multiple records and assign values in Forms, before navigation to that block (in a trigger ), and populate ?

    Hello,
    No you cannot. You need to be inside the block in order to use the Create_Record built-in.
    Francois

  • Multiple Record (Selection) ASAP..

    Hi,
    I have 2 blocks which do have 4 rows displayed (Multiple Rows - no. of records to be diaplay = 5). Now from One Block which has 4 records in it along with check Box, whenevr I click on Check Box, that record or records has to be display in the other Block. User can either select one record or multiple records using Check Box.
    I would be much thankful to u if u could revert me ASAP.
    Thanx in advance
    Bhavesh

    Don't really understand your question but I gather that you want to know how to populate the 2nd block when you mark the checkbox in the 1st block ?
    If this is the case, then I guess that you can create a WHEN-CHECKBOX-CHANGED trigger in the first block and inside the trigger, put in the logic that will move the cursor to the 2nd block, execute the query to populate the block and return back to the 1st block.

  • How to build forms which retrieve multiple records

    Hi everyone,
    I am newbie to APEX.I have a question in FORM building in APEX.In oracle FORMS(6i) has the capability to search with any fileld on it . there is
    an option to search
    data with the id or department or name field.If it retrieves more than one record there
    is navigation controls to move from one record to another.
    Can we build same kind of FORMS in APEX .I didnt find any wizard to build such kind of
    FORM which has both inserting and querying capability.
    I found one option for that in apex (FROM with report).In the report section i can query
    for the records and link to FORM which populates all the data in the FORM. Is that the
    only option do we have in APEX to build the forms which gives multiple records as
    output.
    anyone plz help me in solving this
    thank u

    can anyone please help me in solving this issue,
    Is it possible to build such kind of forms with retrieves multiple records in APEX.
    Thanks

  • Code to sum up multiple record key figure values from one ODS to another OD

    We've got two ODSs: ODS1 and ODS2 and ODS1 feeds data to ODS2 through update rule.  In ODS1, multiple records could contain one same doc records and we would like to sum up a key figure value for these multip records with the same doc number in the update rule and populate a key figure (a sum-up value or total value) in ODS2 for this doc number.  We wonder how the code would look like.
    Welcome the valuable input!
    Thanks

    Hello Kevin,
    In this case there is no need of a code. As in ODS2, contract number is a key and PO is not a part of key, you can have update type for the key figure as "Addition". Value for that particular key figure will be added for all the recordes with same contract number irrespective of PO number.
    Hope it helps.
    Regards,
    Praveen

  • Combining multiple records into a single record (View)

    Okay so here is my scenerio:
    There is a table I have made that details SQL jobs and the various details about them. What i wan't to do is make a view with specific logic implemented. Fields that will be taken across to this view will be: LastRunDate, LastRunTime and Step_Status.
    JobName will also be used to define the logic but will not be a column in itself.
    What i wan't is an additional column using this logic, called 'DataSet'. For each Dataset there are multiple jobs that are unique to it, so there are multiple records being brought over from the table to view for one particular dataset. For example,
    for 'ExampleDataSet' there are three jobs, i wan't it so these jobs are combined and named as 'ExampleDataSet' under a calculated column called 'Dataset'. For the following fields i would like it so that LastRunDate and LastRunTime are the time in whichever
    job was last to be intitiated is the date and time set. For Step_Status, there are three possible results, 'Running', 'Failed' or 'Succeeded'. If any of the three jobs are 'Running', then 'Running'. If neither are running yet one has failed then 'Failed'.
    Only when all three have succeeded should it then be set to 'Succeeded'.
    I hope i have made that clear enough, please feel free to ask any questions if not. I am relatively new to SQL but i thought to at least try least try (I knew it wouldn't work) and it didn't work. But it may give you a better idea of
    what i wan't:
    CREATE VIEW [dbo].[vw_DataAvailabilityAnalysts] AS
    SELECT CASE
    WHEN JobName in ('Job1','Job2','Job3') and step_status='Running' THEN 'Running'
    WHEN JobName in ('Job1','Job2','Job3') and step_status='Failed' THEN 'Failed'
    WHEN JobName in ('Job1','Job2','Job3) and step_status='Succeeded' THEN 'Succeeded'
    END as StatusCheck,
    CASE WHEN JobName in ('Job1','Job2','Job3') THEN 'ExampleDataSet'
    END as DATASET,
    LastRunDate,
    lastruntime,
    step_status,
    FROM [CDS_Common].[dbo].[DataAvailability]
    Many Thanks,
    Plain_Clueless
    Plain_Clueless

    Okay so here is what my table looks like (Simplified). There are four columns and the data within is extracted via a Stored Procedure.
    JobName
    LastRunDate
    LastRunTime
    Step_Status
    Job1
    11/06/2014
    09:30:00
    Succeeded
    Job1
    10/06/2014
    09:37:20
    Succeeded
    Job2
    11/06/2014
    04:05:00
    Succeeded
    Job1
    09/06/2014
    02:17:41
    Succeeded
    As you can see there are 3 jobs which are all 'Job1'. This jobs are obviously different within the table however this represents that they are jobs which all update the same DataSet within our local warehouse. Whereas Job2 updates a different dataset alltogether.
    I wan't to create a view which will alagmate the jobs that are of the same DataSet, which will disclude the column JobName but would create a whole new column that looks like this:
    DataSet
    LastRunDate
    LastRunTime
    Step_Status
    DataSet2
    11/06/2014
    04:05:00
    Succeeded
    DataSet1
    11/06/2014
    09:30:00
    Succeeded
    Bascically what this shows you is all the Job 1's combined so they are one record, Amaglamated. The last time any of these jobs were run is the LastRunDate & LastRunTime, which was the first record in the first table provided. Again for Step_Status,
    there are three possible results, 'Running', 'Failed' or 'Succeeded'. If any of the three jobs are 'Running', then 'Running' (Absolute). If none of the three jobs are running yet one has failed then 'Failed'. If one has failed yet another is also running then
    'Running'.Only when all three have succeeded should it then be set to 'Succeeded'. (This last bit isn't as important).
    Hope this clears it up a bit,
    Plain_Clueless
    Plain_Clueless

  • Add Multiple records to G/L account group.

    Dear ABAP Experts,
    i have requirement that is using  BDC recording file  the Functional People wants to add records to the G/L Account group. The FI consultant gave the recording file, based on the recording file i developed a BDC program. This BDC program will work for single record. After creating single record system will ask for transport request .
    REPORT  ZDP_ACC_GRP.
    TYPES: BEGIN OF TY_TAB,
            KTOPL TYPE KTOPL,
            KTOKS TYPE KTOKS,
            TXT30 TYPE TXT30,
            VONNR TYPE VONNR,
            BISNR TYPE BISNR,
           TRKORR TYPE TRKORR,
       END OF TY_TAB.
    data: lt_tab type table of ty_tab,
           wa_tab type ty_tab.
    data: begin of record,
    * data element: KTOPL
             KTOPL_01_001(004),
    * data element: KTOKS
             KTOKS_01_002(004),
    * data element: TXT30_077T
             TXT30_01_003(030),
    * data element: VONNR_077S
             VONNR_01_004(010),
    * data element: BISNR_077S
             BISNR_01_005(010),
    * data element: TRKORR
             TRKORR_006(020),
           end of record.
    *       Batchinputdata of single transaction
    DATA:   BDCDATA type table of BDCDATA  WITH HEADER LINE.
    *       messages of call transaction
    DATA:   MESSTAB type table of BDCMSGCOLL  WITH HEADER LINE.
    *       error session opened (' ' or 'X')
    DATA:   E_GROUP_OPENED.
    *       message texts
    TABLES: T100.
    data:lv_file type string.
    parameters: p_fname type IBIPPARMS-PATH.
    at selection-screen on value-request for p_fname.
    CALL FUNCTION 'F4_FILENAME'
      EXPORTING
        PROGRAM_NAME        = SYST-CPROG
        DYNPRO_NUMBER       = SYST-DYNNR
        FIELD_NAME          = 'P_FNAME'
      IMPORTING
        FILE_NAME           = p_fname .
    start-of-selection.
    lv_file = p_fname.
    CALL FUNCTION 'GUI_UPLOAD'
       EXPORTING
         FILENAME                      = LV_FILE
    *   FILETYPE                      = 'ASC'
        HAS_FIELD_SEPARATOR           = 'X'
       TABLES
         DATA_TAB                      = LT_TAB
      EXCEPTIONS
        FILE_OPEN_ERROR               = 1
        FILE_READ_ERROR               = 2
        NO_BATCH                      = 3
        GUI_REFUSE_FILETRANSFER       = 4
        INVALID_TYPE                  = 5
        NO_AUTHORITY                  = 6
        UNKNOWN_ERROR                 = 7
        BAD_DATA_FORMAT               = 8
        HEADER_NOT_ALLOWED            = 9
        SEPARATOR_NOT_ALLOWED         = 10
        HEADER_TOO_LONG               = 11
        UNKNOWN_DP_ERROR              = 12
        ACCESS_DENIED                 = 13
        DP_OUT_OF_MEMORY              = 14
        DISK_FULL                     = 15
        DP_TIMEOUT                    = 16
        OTHERS                        = 17  .
    LOop at  lt_tab into wa_tab.
    perform bdc_dynpro      using 'SAPL0F09' '0020'.
    perform bdc_field       using 'BDC_CURSOR'
                                   'V_T077S-TXT30(01)'.
    perform bdc_field       using 'BDC_OKCODE'
                                   '=NEWL'.
    perform bdc_dynpro      using 'SAPL0F09' '0020'.
    perform bdc_field       using 'BDC_CURSOR'
                                   'V_T077S-BISNR(01)'.
    perform bdc_field       using 'BDC_OKCODE'
                                   '=SAVE'.
    perform bdc_field       using 'V_T077S-KTOPL(01)'
                                   WA_TAB-KTOPL."record-KTOPL_01_001.
    perform bdc_field       using 'V_T077S-KTOKS(01)'
                                   WA_TAB-KTOKS."record-KTOKS_01_002.
    perform bdc_field       using 'V_T077S-TXT30(01)'
                                   WA_TAB-TXT30."record-TXT30_01_003.
    perform bdc_field       using 'V_T077S-VONNR(01)'
                                   WA_TAB-VONNR."record-VONNR_01_004.
    perform bdc_field       using 'V_T077S-BISNR(01)'
                                   WA_TAB-BISNR."record-BISNR_01_005.
    perform bdc_dynpro      using 'SAPLSTRD' '0300'.
    perform bdc_field       using 'BDC_CURSOR'
                                   'KO008-TRKORR'.
    perform bdc_field       using 'BDC_OKCODE'
                                   '=LOCK'.
    perform bdc_field       using 'KO008-TRKORR'
                                   WA_TAB-TRKORR."record-TRKORR_006.
    perform bdc_dynpro      using 'SAPL0F09' '0020'.
    perform bdc_field       using 'BDC_CURSOR'
                                   'V_T077S-KTOPL(02)'.
    perform bdc_field       using 'BDC_OKCODE'
                                   '=BACK'.
    perform bdc_dynpro      using 'SAPL0F09' '0020'.
    perform bdc_field       using 'BDC_CURSOR'
                                   'V_T077S-KTOPL(02)'.
    perform bdc_field       using 'BDC_OKCODE'
                                   '=BACK'.
    perform bdc_transaction using 'OBD4'.
    ENDLOOP.
    FORM BDC_TRANSACTION USING TCODE.
       DATA: L_MSTRING(480).
       DATA: L_SUBRC LIKE SY-SUBRC.
    * batch input session
    * call transaction using
         REFRESH MESSTAB.
         CALL TRANSACTION 'OBD4' USING BDCDATA
                          MODE  'A'" CTUMODE
                          UPDATE 'S'"CUPDATE
                          MESSAGES INTO MESSTAB.
         L_SUBRC = SY-SUBRC.
           LOOP AT MESSTAB.
             SELECT SINGLE * FROM T100 WHERE SPRSL = MESSTAB-MSGSPRA
                                       AND   ARBGB = MESSTAB-MSGID
                                       AND   MSGNR = MESSTAB-MSGNR.
             IF SY-SUBRC = 0.
               L_MSTRING = T100-TEXT.
               IF L_MSTRING CS '&1'.
                 REPLACE '&1' WITH MESSTAB-MSGV1 INTO L_MSTRING.
                 REPLACE '&2' WITH MESSTAB-MSGV2 INTO L_MSTRING.
                 REPLACE '&3' WITH MESSTAB-MSGV3 INTO L_MSTRING.
                 REPLACE '&4' WITH MESSTAB-MSGV4 INTO L_MSTRING.
               ELSE.
                 REPLACE '&' WITH MESSTAB-MSGV1 INTO L_MSTRING.
                 REPLACE '&' WITH MESSTAB-MSGV2 INTO L_MSTRING.
                 REPLACE '&' WITH MESSTAB-MSGV3 INTO L_MSTRING.
                 REPLACE '&' WITH MESSTAB-MSGV4 INTO L_MSTRING.
               ENDIF.
               CONDENSE L_MSTRING.
               WRITE: / MESSTAB-MSGTYP, L_MSTRING(250).
             ELSE.
               WRITE: / MESSTAB.
             ENDIF.
           ENDLOOP.
       REFRESH BDCDATA.
    ENDFORM.
    FORM BDC_DYNPRO USING PROGRAM DYNPRO.
       CLEAR BDCDATA.
       BDCDATA-PROGRAM  = PROGRAM.
       BDCDATA-DYNPRO   = DYNPRO.
       BDCDATA-DYNBEGIN = 'X'.
       APPEND BDCDATA.
    ENDFORM.
    FORM BDC_FIELD USING FNAM FVAL.
         CLEAR BDCDATA.
         BDCDATA-FNAM = FNAM.
         BDCDATA-FVAL = FVAL.
         APPEND BDCDATA.
    ENDFORM.
    But the FI consultant wants to add multiple records to 'G/L account group'.After adding records before saving the system need to ask transport request at the last.
    How can I write code ...??
    Please help me.

    Hi Srikanth,
    Thanks for reply,
    You  are right we need to load hierarchy for G/L then we can see all the G/L's for all G/L groups.
    I have one more question when I check in RSA3 for the G/L account numbers, I could not find them.
    I am using the datasource fi_gl_4 and in rsa3 I can see 1000 records data and when I put filter on G/L account and search for the G/L number I needed I cant see it, but it is there in the functional transaction(f.01)?
    How to check for the required G/L's in rsa3 ?
    Thx

  • How to store multiple records for one master reocrd using sequnce

    dear,
    my question is in one form i have master block f and detail block.
    my question is i created one sequence and assign to master table. but i dont know how to assign that sequence to multiple record in detail table for that particular master record. i got lots of answer previously but i m not getting exactly.pls tell me full procedure otherwise gv me one demo application
    NOTe: the sequnce is created after master record commiting to database.
    PLS pls help me
    Thanks
    damby

    i did not get answer pls help me.

  • How to concatenate multiple records into one

    Hi everybody:
    I want to know if exist some way to concat multiple records into one without using cursors. For example, I have a table named "Authors" like this:
    Lan|Author
    English|Ernest Hemingway
    Spanish|Octavio Paz
    Spanish|Mario Vargas Llosa
    English|Sinclair Lewis
    Spanish|Gabriel García Márquez
    And I want to get this:
    Author
    Octavio Paz, Mario Vargas Llosa, Gabriel García Márquez
    I have worked with SQL Server and I can do something like this:
    CREATE FUNCTION dbo.MyConcat (@lan varchar(10))
    RETURNS varchar(5000) AS
    BEGIN
    declare @retvalue varchar(5000)
    set @retvalue=''
    select @retvalue = @retvalue + Author +',' from Authors where lan = @lan
    return substring(@retvalue,1,len(@retvalue)-1)
    END
    ie, do not use cursors to concatenate records. However, with ORACLE, I have to do someting like this.
    FUNCTION MyConcat(P_Lan IN VARCHAR2) RETURN VARCHAR2 IS
    v_ret VARCHAR2(4000);
    v_element VARCHAR2(4000);
    v_cursor sys_refcursor;
    BEGIN
    OPEN v_cursor FOR SELECT Author FROM Authors where Lan = P_Lan
    LOOP
    FETCH v_cursor INTO v_elemento;
    EXIT WHEN v_cursor%NOTFOUND;
    IF v_ret IS NULL THEN
    v_ret := v_element;
    ELSE
    v_ret := v_ret || ', ' || v_element;
    END IF;
    END LOOP;
    RETURN v_ret;
    END;
    Exist some other way to do this?
    Best Regards
    Jack

    Tks both for answer... I forgot to mention that I am using Oracle 10g. I read about LISTAGG() but this function is available for Oracle 11g release 2.
    I wil read about the other techniques than Hoek mention
    Best Regards.
    Jack

  • How to handle multiple records in BPMN process

    Hi All,
    We are using Oracle BPM 11g.In my requirement,I am using the database adapter to get the data from table and I need to validate the each record and update the status of that record from the BPM Process.But I dont know how to handle if multiple records come at a time.Can anybody please helpout from this problem.
    Thanks in advanced.
    Narasimha Rao.

    Can you have a look at this post: http://redstack.wordpress.com/2010/09/30/iteratingtraversing-arrays-in-bpm/
    It's solving a different problem, but the key is that it's using a multi-instance subprocess to iterate over an array of "things" that need to be acted in. In your case it's the set of results from the db query rather than the set of tests in the example. But the principle is the same. You'd take collection of rows from the DB and process them in a multi-instance subprocess. The text that begins with the following would be good place to start:
    "Now let’s implement the body of our process. We will use the Subprocess object to handle the traversal of the array of tests. Drag a Subprocess from the component palette on the right into the process and drop it on the line between the Start and End nodes."
    In the loop characteristics you'd define whether you want to execute serially or in parallel.

  • How to select multiple records in the ALV POP UP by using oops

    Hi All,
    We have a requirement of ALV POP UP by using the OOPS. How to select the multiple records in the POP UP and After selecting that i want do Inteactive ALV means again one more POP UP in ALV.
    Thanks for help....
    Regards,
    Bharani

    Hello Bharani
    Displaying an ALV list in a popup is by no means different from a list displayed on a main screen. The only thing you need to consider is that you set the right screen level when creating the parent container for the ALV.
    For more details refer to thread in CL_GUI_SPLITTER_CONTAINER  ALV list  is not show in called screen
    " step 1:
      CREATE OBJECT gr_spliter
        EXPORTING
          parent = cl_gui_container=>screen0 " For first popup use: =>screen1
          rows = 1
          columns = 2.
    Regards
      Uwe

  • How to get Multiple records from functions

    Hi Everyone
    Im new to this stuff. Im trying  through JCO. As far as the single recordsets like data of customer or article are concerned i get it through an array.
    But i wanted to retrieve
    1- Whole tables like (all articles)
    2- Selected articles. or Customer order details (articles in PO)
    That means multiple records in one go.
    Later on ill display it in JTables.
    Like for the past three days i was googling around. Thought like this ones not for my stomach. Came across this Forum. Thought its worth posting a request.
    Here is the code
    public String[] KSearch(String Knr) throws Exception{
                            String[] Result=new String[11];
                            IFunctionTemplate ftemplate= Con.repository.getFunctionTemplate("SucheKUNDE");
                            if (ftemplate == null)
                                    throw new Exception("Funktionstemplate nicht gefunden");
                            JCO.Function function = ftemplate.getFunction();
                            JCO.ParameterList input = function.getImportParameterList();
                            input.setValue(Knr,"FieldName");
                       JCO.Client client = JCO.getClient(Con.conPoolId);
                       client.execute(function);
                       JCO.ParameterList output = function.getExportParameterList();
                       Result[0]=output.getString("NAME");
                       Result[1]=output.getString("VORNAME");
                       Result[2]=output.getString("GDATE");
                       Result[3]=output.getString("TELEFON");
                       Result[4]=output.getString("MAIL");
                       Result[5]=output.getString("STRASSE");
                       Result[6]=output.getString("PLZ");
                       Result[7]=output.getString("ORT");
                       Result[8]=output.getString("KONTO");
                       Result[9]=output.getString("INSTITUT");
                       Result[10]=output.getString("BLZ");
                                                                                    JCO.releaseClient(client);
                       return Result;
    now instead of a single record what if im expecting a number of records, like what if i need customer over 25. Which means more than one. I have to get in tabular format so that i can display it in JTables.
    Hope it a bit illustrative.
    Regards
    Edited by: Aaron Maleck on Jan 5, 2008 7:35 AM

    public String[] KSearch(String Knr) throws Exception{
    String[] Result=new String11;
    IFunctionTemplate ftemplate= Con.repository.getFunctionTemplate("SucheKUNDE");
    if (ftemplate == null)
    throw new Exception("Funktionstemplate nicht gefunden");
    JCO.Function function = ftemplate.getFunction();
    JCO.ParameterList input = function.getImportParameterList();
    input.setValue(Knr,"FieldName");
    JCO.Client client = JCO.getClient(Con.conPoolId);
    client.execute(function);
    // Maybe here you should use a JCO.Table Class to get the //ExportParameters such as
    JCO.Table output = function.getTableParameterList().getTable( "tabelname" );
    // so you can use setRow() Function to get the information of the //relevant record. such as the 3. Costum
    output.setRow(3);// Record Number
    Result[0]=output.getString("NAME");
    Result[1]=output.getString("VORNAME");
    Result[2]=output.getString("GDATE");
    Result[3]=output.getString("TELEFON");
    Result[4]=output.getString("MAIL");
    Result[5]=output.getString("STRASSE");
    Result[6]=output.getString("PLZ");
    Result[7]=output.getString("ORT");
    Result[8]=output.getString("KONTO");
    Result[9]=output.getString("INSTITUT");
    Result10=output.getString("BLZ");
    JCO.releaseClient(client);
    return Result;
    &#65321;am not sure that works. But you can try it. and reply me to tell if it really works as i think.
    Hope helps.
    Amao

Maybe you are looking for