Populating the value of Sel Screen Parameter in the Free Characrtistic

Hi ,
The requirement is that we have 2 dates - Touched Date and Created on Date .
The Touched date is present in the Selection Screen .
Now we need to use th value entered for the Touched Date as default value of the created on Date in the Free Characteristics.
Please provide inputs on the same .
Regards
Edited by: Garima on Dec 10, 2010 4:07 PM

As you said touched date is present in selection screen, you might be having a manula i/p variable for it. Right?
Now create a cust exit variable for "created on Date".
In cmod transaction use the following code to populate values from touched date to created on date.
when '+Variable name of created on date+'.
    loop at i_t_var_range into lwa_var_rng where vnam = +'variable name of touched date'+.
      lwa_range-low = lwa_var_rng-low.
      lwa_range-high = lwa_var_rng-high.
      lwa_range-sign = 'I'.
      lwa_range-opt = 'EQ'.
      append lwa_range to e_t_range.
      clear lwa_range.
    endloop.
This code u should write inside if i_step = 2. condition.
Now the cmod variable of created on date will have the same values of the touched date populated.
Now u can use the filter as cmod variable of created on date and use created on date in ur free characteristics.
Hope this helps. Revert back for any queries.
Rgds,
Guru

Similar Messages

How to put a value in a selection screen parameter

how do i forcefully put a value to a field in the selection screen.
i mean during runtime.
and it's a parameter not a selection-option.
thanks

Hi,
Check this sample code.It can help you.Basically you need to use 'DYNP_VALUES_READ' in at selection-screen on value-request for s_posnr-low.
tables : vbap. " Sales Document: Item Data
 Constant Declaration *
CONSTANTS:
C_X TYPE C VALUE 'X'. " Translate to Uppercase
 Variable Declaration *
Variable for Table index
data v_sytabix like sy-tabix.
Variable for Program name
data L_NAME LIKE SYST-REPID.
Range for getting values form selection screen
DATA: BEGIN OF range1 OCCURS 0,
 SIGN(1),
 OPTION(2),
 LOW LIKE vbap-vbeln,
 high like vbap-vbeln,
 END OF range1.
Internal table for Report output
data: begin of i_vbap occurs 0,
 vbeln like vbap-vbeln, " Sales Document
 posnr like vbap-posnr, " Sales Document item
 end of i_vbap.
Internal table for output to the F4 help
data: begin of I_DISPLAY occurs 0,
 vbeln like vbap-vbeln, " Sales Document
 posnr like vbap-posnr, " Sales Document item
 end of I_DISPLAY.
Internal table for return value form function module
DATA: BEGIN OF I_RETURNVAL OCCURS 0.
 INCLUDE STRUCTURE DDSHRETVAL. " Interface Structure Search
DATA: END OF I_RETURNVAL.
Internal table for F4 help field heading
DATA: I_FIELDTAB LIKE DFIES OCCURS 0 WITH HEADER LINE.
Internal table for getting screen values from selection screen
data L_SCR_FIELDS LIKE DYNPREAD OCCURS 1 WITH HEADER LINE.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME title text-001.
select-options:
 S_VBELN for vbap-vbeln no intervals,
 S_POSNR for vbap-posnr no intervals.
SELECTION-SCREEN end OF BLOCK B1.
at selection-screen on value-request for s_posnr-low.
clear: L_SCR_FIELDS, I_FIELDTAB, i_display, I_RETURNVAL.
refresh: L_SCR_FIELDS, I_FIELDTAB, i_display, I_RETURNVAL.
L_NAME = SYST-REPID.
MOVE 'S_VBELN-LOW' TO L_SCR_FIELDS-FIELDNAME.
APPEND L_SCR_FIELDS.
Call the Function module DYNP_VALUES_READ to get the values form
selection screen
CALL FUNCTION 'DYNP_VALUES_READ'
 EXPORTING
 DYNAME = L_NAME
 DYNUMB = SYST-DYNNR
 TRANSLATE_TO_UPPER = C_X " X
 TABLES
 DYNPFIELDS = L_SCR_FIELDS
 EXCEPTIONS
 INVALID_ABAPWORKAREA = 1
 INVALID_DYNPROFIELD = 2
 INVALID_DYNPRONAME = 3
 INVALID_DYNPRONUMMER = 4
 INVALID_REQUEST = 5
 NO_FIELDDESCRIPTION = 6
 INVALID_PARAMETER = 7
 UNDEFIND_ERROR = 8
 DOUBLE_CONVERSION = 9
 STEPL_NOT_FOUND = 10
 OTHERS = 11
IF SY-SUBRC eq 0.
 LOOP AT L_SCR_FIELDS.
 range1-sign = 'I'.
 range1-option = 'EQ'.
 range1-low = L_SCR_FIELDS-FIELDVALUE.
 range1-high = space.
 append range1.
 ENDLOOP.
ENDIF.
F4 help Field headings
I_FIELDTAB-TABNAME = 'I_DISPLAY'.
I_FIELDTAB-FIELDNAME = 'VBELN'.
I_FIELDTAB-POSITION = '1'.
I_FIELDTAB-OUTPUTLEN = '10'.
I_FIELDTAB-INTTYPE = 'C'.
I_FIELDTAB-INTLEN = '10'.
APPEND I_FIELDTAB.
I_FIELDTAB-FIELDNAME = 'POSNR'.
I_FIELDTAB-POSITION = '2'.
I_FIELDTAB-OFFSET = '10'.
I_FIELDTAB-OUTPUTLEN = '6'.
I_FIELDTAB-INTTYPE = 'N'.
I_FIELDTAB-INTLEN = '6'.
APPEND I_FIELDTAB.
Retrieve sales document, Sales document item from table Sales
Document: Item Data(VBAP).
Primary keys used for selection: VBELN
select vbeln posnr from vbap
 into table i_display
 where vbeln in range1.
Call the function module F4IF_INT_TABLE_VALUE_REQUEST for F4 values
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
 EXPORTING
 RETFIELD = 'POSNR'
 WINDOW_TITLE = 'Line Item'
 VALUE_ORG = 'S'
 MULTIPLE_CHOICE = C_X " (for muliple selection)
 TABLES
 VALUE_TAB = I_DISPLAY
 FIELD_TAB = I_FIELDTAB
 RETURN_TAB = I_RETURNVAL
 EXCEPTIONS
 PARAMETER_ERROR = 1
 NO_VALUES_FOUND = 2
 OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
Star for For single values
READ TABLE I_RETURNVAL INDEX 1.
 S_POSNR-LOW = I_RETURNVAL-FIELDVAL.
End for the single values
Start For multiple selection
 loop at i_returnval.
 s_posnr-sign = 'I'.
 s_posnr-option = 'EQ'.
 s_posnr-low = I_RETURNVAL-FIELDVAL.
 append s_posnr.
 endloop.
 sort s_posnr.
 read table s_posnr index 1.
End for multiple selection
ENDIF.
 Start-of-selection *
start-of-selection.
Retrieve sales document, Sales document item from table Sales
Document: Item Data(VBAP).
Primary keys used for selection: VBELN
select vbeln posnr from vbap
 into table i_vbap
 where vbeln in s_vbeln
 and posnr in s_posnr.
if the above selection is successful continue the process else exit *
form the report
if sy-subrc ne 0.
 message e002 with 'No data to display'.
endif.
end-of-selection.
if not i_vbap[] is initial.
 loop at i_vbap.
 write:/ i_vbap-vbeln, i_vbap-posnr.
 endloop.
endif.

Problem in getting parameter value from selection screen in web dynpro abap

Hi,
I am facing problem in getting parameter value from selection screen.
Please find my code below:
DATA LT_PAR_ITEM TYPE IF_WD_SELECT_OPTIONS=>TT_SELECTION_SCREEN_ITEM.
FIELD-SYMBOLS:<FS_PAR_ITEM> LIKE LINE OF LT_PAR_ITEM,
 <FS_OBJ_USAGE> TYPE REF TO data.
WD_THIS->M_HANDLER->GET_PARAMETER_FIELDS( IMPORTING ET_FIELDS = LT_PAR_ITEM ).
LOOP AT LT_PAR_ITEM ASSIGNING <FS_PAR_ITEM>.
 CASE <FS_PAR_ITEM>-M_ID.
 WHEN `OBJ_USAGE`.
 ASSIGN <FS_PAR_ITEM>-M_VALUE->* TO <FS_OBJ_USAGE>.
[ Here, sy-subrc is 4, <FS_OBJ_USAGE> is not assigning.]
 ENDCASE.
ENDLOOP.
So, can any one solve this problem.
Thanks in advance,
Radhika

Hi Radhika,
Try using GET_RANGE_TABLE_OF_SEL_FIELD...
Please Refer below code..
 DATA: NODE_FLIGHTS TYPE REF TO IF_WD_CONTEXT_NODE.
DATA: RT_CARRID TYPE REF TO DATA.
DATA: ISFLIGHT TYPE TABLE OF SFLIGHT.
DATA: WSFLIGHT TYPE SFLIGHT.
FIELD-SYMBOLS: <FS_CARRID> TYPE TABLE.
Retrieve the data from the select option
RT_CARRID = WD_THIS->M_HANDLER->GET_RANGE_TABLE_OF_SEL_FIELD( I_ID = 'S_CARR_ID' ).
Assign it to a field symbol
ASSIGN RT_CARRID->* TO <FS_CARRID>.
CLEAR ISFLIGHT. REFRESH ISFLIGHT.
SELECT * INTO CORRESPONDING FIELDS OF TABLE ISFLIGHT FROM SFLIGHT
 WHERE CARRID IN <FS_CARRID>.
NODE_FLIGHTS = WD_CONTEXT->GET_CHILD_NODE( NAME = `FLIGHTS` ).
NODE_FLIGHTS->BIND_ELEMENTS( ISFLIGHT ).
Thanks,
Regards,
Kiran

How we can get the values from one screen to another screen?

hi guru's.
how we can get the values from one screen to another screen?
we get values where cusor is placed but in my requirement i want to get to field values from one screen to another screen.
regards.
satheesh.

Just think of dynpros as windows into the global memory of your program... so if you want the value of a field on dynpro 1234 to appear on dynpro 2345, then just pop the value into a global variable (i.e. one defined in your top include), and you will be able to see it in your second dynpro (assuming you make the field formats etc the same on both screens!).

How to get the list of values for a dynamic parameter using Web Services SDK?

I am struggling to get the list of values for a dynamic parameter of a report.I am using Java Web Services SDK ... I tried to use PromptInfo.getLOV().getValues() method but it does not work.First of all ... is this possible (to get the list of values for a dynamic param) using Web Services?Second of all, if this is possible, how should I do it ... it seems it works fine when running the report from CMC. It asks for DB logon info and after that it provides a list of values.Thx 

Your assumption is correct. We are trying to get the LOVs from the Crystal Report. I was not aware that this is not supported by Web Services SDK.We used Web Services SDK to integrated the Crystal Reports in our web application. We implemented some basic actions for reports: schedule, view instances, run ad-hoc reports.We encountered this problem when trying to run/schedule reports with dynamic parameters (a list of values from DB). We were unable to get the LOVs.Please let me know if you can think of an alternative to look at.Thanks a lot,Catalin

Populating the table with values in a jsp

need help...
i have a jsp with 2 textboxes lastname and firstname and a button submit.
wen i click on submit i should get a table on the same jsp below the submit button and it should be populated with the values entered in the textboxes.
Can you pl help me out the the functionality of populating the textboxes?

add a onclick function to button...on that onclick u hav e to populate a div with fname and lname
in tat new div giv bean :write so tat u can get wat u have entered in above text boxes

Populating the output parameter in function module.

Hi Experts,
I have written a function module,with material number,BEZEI as input and mvgr2 as output from table tvm2t.I am facing a problem in populating the material number as well in outputtable.The material number in input is nothing to do with output.
please help me at the earliest.
Regards,
Sridevi.

Hmmm, you wrote that the output is 'table parameter' but you mention 2 single fields. If you expect a good reply here, it helps to mention how you defined the table and how you select the data for the output. For example: input is matnr and you select the material group of this matnr. Output is all other matnr of this material group. Then we would know what you want to do here.
So please describe what you need and give us the table description.
Regards
Nicola

How to default the values in BP screen with BDT?

Hi all,
I am working in BDT enhancement for BP for Grants mangement. Therefore there are some screen fields in BP transaction should directly get saved in GMSPONSOR table. I mean to say user would give some values in BP screen(One can get it at the runtime by calling the FM BUP_BUPA_BUT000_GET) and the relevant values will autometically goes to GMSPONSOR table if the BP is saved.
As per my knowlwdge there are many events under BUPT transaction and there also I found the entry of GMSPONSOR table. Can anyone tell me in which event I have to default these screen values and redirect these to GMSPONSOR table?
Thnaks & Regards
Dibyendu.

Dear Smita,
Thanks for your reply. The fact is that if I could default it in the screen text box then it would autometically goes to the corresponding table at save event.
So could you help me to identify the event by which one can keep default values in screen.
May be ISDAT or ISSTA event to default the valuesfor BP.
I have done to some extent for the fields belonging to BUT000 with the help of FM BUP_BUPA_FIELDVALUES_SET. I have placed a Z FM in ISDAT event. But the problem lies with the fields belonging to other tables.
Waiting for your update.

How to Remove the underline from the selection screen parameter

How to remove the underline from a selection screen parameter ?

>
Anoop Menon wrote:
> hi Avinash,
>
> I am not able to understand the use of the 'comment line properly.
>
> The last part of the statement which says modif id is confusing.
>
> Please clarify..... I am unable to activate my code when I put the selection screen commebnt statement.
Use this and update it to your requierement !
SELECTION-SCREEN begin of line.
SELECTION-SCREEN COMMENT 1(30) comm.
PARAMETERS test(1) type c.
SELECTION-SCREEN end of line.
INITIALIZATION.
comm = 'test'.

REP-546: Warning: The value of restricted LOV parameter

Hi,
When i try to invoke my report from IE with paramform=no and i am not passing the parameter LEXXX_ENTXXXX in the URL, i am getting the below error,
REP-546: Warning: The value of restricted LOV parameter LEXXX_ENTXXXX is not among the selectable values.
but the same report is working fine if i invoke with paramform=yes.
The Parameter LOV query for the parameter LEXXX_ENTXXXX is ,
SELECT LGL.CY_LEXXX_ENTXXXX, COM.SHORT_NAME FROM LEXX_ENTXXX LGL, COMXXXX COM
WHERE LGL.CY_LEXXX_ENTXXXX = COM.COMXXXX_KEY
UNION SELECT 0, 'ALL' FROM DUAL ORDER BY 2 ASC
Note: Restrict List to Predetermind Values and Hide First Column check boxes are selected
Data Type of LEXXX_ENTXXXX is Number and size is 6.
Please, help me in resolving the above error.
Thanks in advance
Thanks & Rgds,
M T

The value that you give to parameter LEXXX_ENTXXXX when you are submitting your report on the web is not amoung the values returned by the Parameter List of Values Query , and when the Parameter List of Values Query was created "Restrict List to Predetermined Values" check box was checked.
In order to solve the proble you can :
- provide a value to LEXXX_ENTXXXX that is amoung the values returned by
Parameter List of Values Query
or
- uncheck the Restrict List to Predetermined Values" check box of the parameter.
Regards
Ionut S

Error :Value of restricted LOV parameter not among the selectable values

Hi,
I am designing a report which has two layouts. I have a parameter :P_Reason_code which is applicable to only one layout.
There is a repeating frame in my first layout which should display only if :P_Reason_code value is 'Y'.
I have wriiten a format trigger for this repeating frame saying the repating frame should return true if :P_Reason_code value= 'Y'.
else, it should return false meaning it shouldnt display.
:P_Reason_code is an optional parameter when i run it at the oracle apps front end.
The problem that i am facing is that when i run the report for the second layout by not providing value for the parameter :P_Reason_code
, it errors out saying "REP-0788: Warning: The value of restricted LOV parameter P_REASON_CODE is not among the selectable values.'
I tried creating another user parameter P_REASON_CODE1 and putting a trigger in the After parameter form trigger saying
if P_REASON_CODE is null then
P_REASON_CODE1 :='Y';
P_REASON_CODE := P_REASON_CODE1;
ELSE
P_REASON_CODE1 := P_REASON_CODE;
P_REASON_CODE := P_REASON_CODE;
END IF;
But still it doesnt seem to work.
What could be the issue?
Can anyone help?

try setting the default-value for the parameter to Y (or whatever value is in the LoV defined for the parameter).
Is there a parameterform used for the report. If not remove the LoV from the parameter.

What is the values and meaning for parameter TCLAS in functions

what is the values and meaning for parameter TCLAS in functions like
HR_INFOTYPE_OPERATION
regards
jan

Hi Jan,
Good Morning,
In TCLAS,
A, B , T will be there.
A- Master data and time data.
B- Applicant data.
T- Shift Schedule.
So, here we can say the default value will be integrated according to the above ABT.
Means in the feature ABKRS, if you give the default values for all the three, your payroll area will appear in Master Data and Time data. And in recruitment ( Appicant data ) and work schedules. Means you are getting ingrated to all the three.
And you can observe the feature PINCH also.
If you dont want to get integrate with Master data, then dont give the default value under the A- Master date and Time data. And if you want to get integrate with Recruitment , then give the default value under B.
I think u got the clear idea about TCLAS.
Dont forget to give the points
Thanks in Advance
Cheers
Vijai

The value (30) of MAXTRANS parameter ignored.

I am getting the following error....
Tue Feb 05 20:31:05 2013
The value (30) of MAXTRANS parameter ignored.
kupprdp: master process DM00 started with pid=49, OS id=6824
to execute - SYS.KUPM$MCP.MAIN('SYS_EXPORT_SCHEMA_30', 'ORISSA_TRANSACTION', 'KUPC$C_1_20130205203106', 'KUPC$S_1_20130205203106', 0);
kupprdp: worker process DW01 started with worker id=1, pid=51, OS id=9036
to execute - SYS.KUPW$WORKER.MAIN('SYS_EXPORT_SCHEMA_30', 'ORISSA_TRANSACTION');
Please suggest a solution...

rp0428 wrote:
What are you doing when you get that error? Using expdp?
See if this thread is the same issue and cause of yours.
value (30) of MAXTRANS parameter ignored
Yes, EXPDP.....

Exporting and importing a field value from one screen to another in BSP

Hi All,
I am working on a BSP application which consists of multiple screens. I have to export the value corresponding to a value selected from a drop down and import it in another screen so that in the next screen values can be populated corrsponding to the value selected in the drop down in the first screen.
I tried using SET/GET parameter and also EXPORT/IMPORT so that I can get value from one screen into another screen but both the statements are not working in BSP....
Please help...
Vivek Gupta
Edited by: guptav_infy on Feb 21, 2010 11:33 AM

Hi All,
This question is still un answered. please reply ..
Vivek

F4 help for a selection screen parameter with filename created dynamically

Hi All,
          I have a requirement where in an F4 help should be present for a selection screen parameter. After selecting the filepath and clicking OK button on the Dialog, the filename should be dynamically get created in the selection screen parameter field. For example:
if the path is D:\DOCS then at the end of DOCS the filename should automatically get populated.
Like below string:
D:\DOCS\new.txt
Is there any function module or method which does this kind of activity.
Thanks in advance,
Deepak

this code will help:
FORM get_filename CHANGING p_filename.
DATA      : lv_filename TYPE string,
              lv_rc TYPE i,
              li_filetable TYPE filetable.
CONSTANTS : lc_fname TYPE string VALUE 'ZRPP4000.XLS',
              lc_fpath TYPE string VALUE 'C:\',
              lc_extn TYPE string VALUE 'XLS'.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
    EXPORTING
      default_filename        = lc_fname
      initial_directory       = lc_fpath
      default_extension       = lc_extn
    CHANGING
      file_table              = li_filetable
      rc                      = lv_rc
    EXCEPTIONS
      file_open_dialog_failed = 1
      cntl_error              = 2
      error_no_gui            = 3
      not_supported_by_gui    = 4
      OTHERS                  = 5.
IF sy-subrc = 0 .
    READ TABLE li_filetable INTO lv_filename INDEX 1.
    IF sy-subrc = 0.
      p_filename = lv_filename.
    ENDIF.
ENDIF.
REFRESH li_filetable.
CLEAR:lv_filename.
ENDFORM.                    "get_filename
" p_filename is selection screen parameter

Populating the value of Sel Screen Parameter in the Free Characrtistic

Similar Messages

Maybe you are looking for