Popup of JComboBox shows on mouseclick but disappears on tab-key
Hi everybody, I have a DefaultCellEditor with a ComboBox and I want the popup to be visible on focus, so I overwrite the changeSelection method of the JTable as follows:
public void changeSelection(int rowIndex, int columnIndex, boolean toggle, boolean extend) {
super.changeSelection(rowIndex, columnIndex, toggle, extend);
super.editCellAt(rowIndex, columnIndex);
} else if (getEditorComponent() instanceof JComboBox) {
JComboBox editor = (JComboBox)(getEditorComponent());
editor.requestFocusInWindow();
editor.showPopup();
}This behaves like I want it to on mouseclicks. On Tab focus the popup is shown as long as I hold the tab key but disappears again after. What does the release of the Tab key does what the mouse button doesn't and can I change it?
thanks for aswers
Classic case of file naming.
iOS is case-sensitive and requires the name of the file be exactly the same as that used in your code.
MyImage01.png is not the same as myIMAGE01.PNG
OS X, and thus the simulator, is not case-sensitive.
Similar Messages
-
Home page shows on startup as normal, but On New Tab, Yahoo Loads, dont want this to occur. How do I get rid of Yahoo?
i5, Win7ult, latest ver of FFhttp://support.mozilla.com/en-US/kb/Changing+the+e-mail+program+used+by+Firefox
-
IMessage: Picture shows on notification, but disappears in conversation.
I started having this problem with iMessages where I will be notified that I received a picture message and I will see it in on the locked screen, but when I open the conversation nothing is there. This happens sporadically, so I am able to receive some pictures. After I restart the phone, I get an image of "? Unknown" in a comment bubble where the picture that didn't come through should be. As far as I am aware, this just started happening yesterday, and it is sporadic. Some images come through while others don't. Again, I am able to see the photo on the locked screen or the notification of the message, however, I am not able to see it in the message.
I am on a iPhone 4s with iOS 6.0.1.
I have read somewhere that it may be an unknown file error, however, the sending party (my girlfriend) is using the same version of iPhone and using only the built-in camera app.I am having this exact same problem with iMessage. As far as I can tell, It started this morning. Other people can send me pictures, but all of them that have have been from iphones. So you can probably send them over cellular.
-
Having an odd issue. Frequently, when I go to Safari, I see a (what appears to be) popup that goes away in a few seconds. Looks almost like an app download, but disappears in a hurry and then goes to site I was last visiting. I'm stumped how to fix (popups disabled, etc.)... Goes away so quick I'm not even sure what it's about...
Thanks for the update! Next, and this is like a last step for me, but I would quit Safari one more time, then clear all the Safari data from the phone with this info and then test it out again:
Safari web settings on your iPhone, iPad, or iPod touch
Clear information from your device
To clear your history and cookies from Safari in iOS 8, tap Settings > Safari > Clear History and Website Data. In iOS 7 or earlier, tap Clear History and tap Clear Cookies and Data.
To clear other stored information from Safari, tap Settings > Safari > Advanced > Website Data > Remove All Website Data. -
regarding the article: iTunes Store: Troubleshooting iTunes Match: in my mac iTunes, i don't have a menu option 'view > view options'. i do have 'view > show view options'. but the resulting popup is different. is this article out of date?
i am troubleshooting iTunes match because it has been days since i uploaded music to mac iTunes and it still has the iCloud status icon for 'waiting'.Is there really nobody else with this problem? Really?
-
My calendar appointments show for future events, but disappear once I reach the day of the event. So I can see tomorrow's appointments now, but they will be gone tomorrow. Why is this happening? It's on my iPhone and iPad.
For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices.
That all works.
It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now. They are all synced, and all was working just fine.
I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
Thanks for listening,
Melissa -
Popupmenu & JComboBox shows up behind JInternalFrame on glasspane
Till Java 6 update 12 we used setLightWeightPopupEnabled on the popupmenus and JComboBoxes to make them appear on the toplevel when showing the glasspane. The situation is as followed:
- A Swing application
- Over the Swing application is a glasspane (extends JPanel)
- Added on the glasspane is a JInternalFrame (with on it components like a JPanel)
- When clicking with right mouse button, a popupmenu shows up. When using setLightWeightPopupEnabled it works perfectly
But when Java 6 update 12 was released, the popupmenu and JComboBox popup are shown behind the JInternalFrame (but above the glasspane).
SUN made some adjustments in the system. Does anyone knows how I can solve the problem as described above?I made a simple code example which simulates the problem. The combobox popup falls behind the JInternalFrame. Another strange effect is when you try to resize the JInternalFrame, the JInternalFrame is closed.
import java.awt.BorderLayout;
import javax.swing.JComboBox;
import javax.swing.JFrame;
import javax.swing.JInternalFrame;
import javax.swing.JPanel;
public class PopupBehindInternalFrame
public static void main (String args[]){
JFrame frame = new JFrame();
JPanel panel = new JPanel();
frame.getContentPane().add(panel);
frame.setSize(800, 600);
frame.setVisible(true);
JInternalFrame jif = new JInternalFrame();
jif.setSize(400, 300);
jif.setResizable(true);
JPanel panelJif = new JPanel();
jif.add(panelJif, BorderLayout.SOUTH);
JComboBox cb = new JComboBox();
cb.setSize(100, 10);
cb.addItem("Test 1");
cb.addItem("Test 2");
cb.addItem("Test 3");
cb.addItem("Test 4");
cb.setLightWeightPopupEnabled(false);
panelJif.add(cb);
panel.getRootPane().setGlassPane(GlassPane.getInstance());
GlassPane.getInstance().setVisible(true);
GlassPane.getInstance().add(jif);
jif.setVisible(true);
import java.awt.Color;
import java.awt.Graphics;
import java.awt.Graphics2D;
import java.awt.event.MouseAdapter;
import javax.swing.InputVerifier;
import javax.swing.JComponent;
import javax.swing.JPanel;
public class GlassPane extends JPanel
private static final long serialVersionUID = 1L;
private static GlassPane glassPane = null;
private Color color = new Color(0, 128, 128, 128);
public GlassPane()
setOpaque(false);
setLayout(null);
addMouseListener(new MouseAdapter()
setInputVerifier(new InputVerifier()
public boolean verify(JComponent input)
return !isVisible();
protected void paintComponent(Graphics g)
if (getComponents().length > 0)
Graphics2D g2 = (Graphics2D) g.create();
g2.setColor(color);
g2.fillRect(0, 0, getWidth(), getHeight());
g2.dispose();
else
super.paintComponent(g);
public static GlassPane getInstance()
if (glassPane == null)
glassPane = new GlassPane();
return glassPane;
} -
Issue in FF v 3.6.10: I have a web page which have more than 20 link, clicking on each of these link opens up a pop-up using window.showModalDialog, for the first consecutive 20 popup opens up without any prob but for the 21st n more click it block the popup and do not open. This is m problem, the real user on the web page can click on more than 20 link in such a scenario it may create problem, please help
Your above posted system details show outdated plugin(s) with known security and stability risks.
*Shockwave Flash 9.0 r999
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
In Firefox 3.6 and later versions you need the Next-Generation Java™ Plug-In present in Java 6 U10 and later (Linux: libnpjp2.so; Windows: npjp2.dll).
http://java.com/en/download/faq/firefox_newplugin.xml
See also http://java.sun.com/javase/6/webnotes/install/jre/manual-plugin-install-linux.html -
Songs won't show on iphone5 but itunes on Mac says they are there.
Hi guys,
On my iTunes on my Mac it shows that there are songs and playlists on my iphone (both when usb plugged in and on wifi) but on the actual device they won't show. Only about 10 songs show up. There is plenty of storage space on the device and they were there before but disappeared after an update. I've tried re-syncing and dragging them over manually but nada. Some of the playlists show but are empty on the device. Any ideas? Thanks.Hi HeyBayLondon!
It sounds like you may want to try restoring your phone and then re-syncing the content from your computer to see if the information will show up after that procedure. Information on doing that can be found right here:
iTunes: Restoring iOS software
http://support.apple.com/kb/ht1414
Thanks for coming to the Apple Support Communities!
Regards,
Braden -
My printers works fine on my home network but disappears on a remote desktop terminal connection
As I don't really know how to post a general addition to the knowledge base, I'm doing in Jeopardy style. Here is the question to the above answer. Well close enough.
Many people have reported all over the net issues with printers working just fine on their home network but disappearing when they connect to a server via RDT. There are some legit updates needed where windows did not see anything but LPT and COM ports for printer re-direction assignment. There are Mr. Fix it's for those and registry patches. When all of that fails, the information highway seems to dead end.
Here is what I learned today via 2 specific printers: HP1022 and HP2840 lasjerjets.
After many months of frustration and 7 1/2 hours with Microsoft advanced prof support I've finally pinned down this printer and a slew of others. This problem as far as I have come across deals exclusively with HP printers. In simple terms: the drivers are flawed. This 1022 is a prime example. It prints locally and via TCP/IP just fine. I have about 7 other printers and dummy printers in my printer folder. Enter a remote desktop session and ALL of them populate except the 1022. This shows that the hooks and RDT finders are locating your printers and installing them properly as remote printers. All except the 1022.
Log out of your RDT session: goto the local 1022 setup and change the printer driver to a PCL driver. I used a 1200 PCL driver. Now log back into your RDT server and hockus pocus! there is your printer. Totally un-usable because the driver will not run this printer. Caveat: each time I did this XP crashed (I couldn't get to the properties TAB anymore -- I had to un-install the 1022 and then re-install it with at least 1 reboot in the process)
Moving on we go to the HP OfficeJet/LajerJet2840. Same thing. It won't pass through as remote printer in RDT. Go local. Set the printer driver to AppleLaserWriter8500 and boom. (same logout, change, back in steps) and your LJ2840 shows up and works.
While I will have to wait until tomorrow I am betting that this will fix the exact same problem with the HP Officejet 8500A all in one with the exact same problem.
Hey HP? Whats with the drivers??
Another work around if you have a static enough environment is to install your local printer that will not show up under RDT on the server, and then point the port to your fixed IP on your router, and passthru port 9100 to your locally installed printer that is failing. You can now be on RDT and chooses the network printer that is printing to the TCP address of your home (or office) router.As I don't really know how to post a general addition to the knowledge base, I'm doing in Jeopardy style. Here is the question to the above answer. Well close enough.
Many people have reported all over the net issues with printers working just fine on their home network but disappearing when they connect to a server via RDT. There are some legit updates needed where windows did not see anything but LPT and COM ports for printer re-direction assignment. There are Mr. Fix it's for those and registry patches. When all of that fails, the information highway seems to dead end.
Here is what I learned today via 2 specific printers: HP1022 and HP2840 lasjerjets.
After many months of frustration and 7 1/2 hours with Microsoft advanced prof support I've finally pinned down this printer and a slew of others. This problem as far as I have come across deals exclusively with HP printers. In simple terms: the drivers are flawed. This 1022 is a prime example. It prints locally and via TCP/IP just fine. I have about 7 other printers and dummy printers in my printer folder. Enter a remote desktop session and ALL of them populate except the 1022. This shows that the hooks and RDT finders are locating your printers and installing them properly as remote printers. All except the 1022.
Log out of your RDT session: goto the local 1022 setup and change the printer driver to a PCL driver. I used a 1200 PCL driver. Now log back into your RDT server and hockus pocus! there is your printer. Totally un-usable because the driver will not run this printer. Caveat: each time I did this XP crashed (I couldn't get to the properties TAB anymore -- I had to un-install the 1022 and then re-install it with at least 1 reboot in the process)
Moving on we go to the HP OfficeJet/LajerJet2840. Same thing. It won't pass through as remote printer in RDT. Go local. Set the printer driver to AppleLaserWriter8500 and boom. (same logout, change, back in steps) and your LJ2840 shows up and works.
While I will have to wait until tomorrow I am betting that this will fix the exact same problem with the HP Officejet 8500A all in one with the exact same problem.
Hey HP? Whats with the drivers??
Another work around if you have a static enough environment is to install your local printer that will not show up under RDT on the server, and then point the port to your fixed IP on your router, and passthru port 9100 to your locally installed printer that is failing. You can now be on RDT and chooses the network printer that is printing to the TCP address of your home (or office) router. -
When i copy songs with home sharing it shows it copying but doesn't show up in the library
When I copy songs with home sharing it shows it copying but doesn't show up in the library. What should I do ?
Hi adtsalmon,
You can only watch the movie on the device you rented it on. Here's a snippet from the Apple Support site (italics mine):
If you download a rented movie on your computer: You can transfer it to a device such as your Apple TV (1st generation), iPhone, iPad, or iPod if it’s a standard-definition film (movies in HD can only be watched on your computer, iPad, iPhone 4 or later, iPod touch (4th generation or later), or Apple TV). Once you move the movie from your computer to a device, the movie will disappear from your computer's iTunes library. You can move the movie between devices as many times as you wish during the rental period, but the movie can only exist on one device at a time.
If you download a rented movie on your iPhone 4 or later, iPad, iPod touch (4th generation or later), or Apple TV: It is not transferable to any other device or computer.
Here's the link to the Movie Rentals FAQs site FYI:
http://support.apple.com/kb/HT1657
Hope this helps!
Cheers,
GB -
App Store icon shows updates available, but all apps up to date
Just bought Iphone 5c, second day, App store icon shows updates available, but PC, store and other Iphones show none. Tried resetting, updates to ios 8.02, synching, going through each app individually to see if there is an update, no luck.
Wnen I reset, the icon shows a badge with 7 updates available. I opened App Store, bottom right (update icon) showed the same. Tapped it, the update screen appears (as normal), and the 7 on the update icon disappeared, screen says UPDATES All apps are up to date. However, on the home screen, the App store badge still shows 7 updates.
Anyone else having the same prob? What is the fix?Tried that, tries a soft reset, and a hard reset, no luck. Funny thing is, my other iphones and IPad work fine, its just the Iphone 5.
-
In the far left hand column, Devices keeps disappearing. I can get it back by downloading iTunes again but disappears again after I run disk utility.
With a Device plugged in - place your mouse cursor over DEVICES - you should see 'show' or 'hide'. Click on 'show'.
MJ -
Several days of edited photos disappeared after a force quit of iphoto, events are there but empty but when I try to reload from sd card it shows adited duplicates, but I can't find them on the mac. I have originals but would prefer not to have to edit again.
Back up your iPhoto library, depress and hold the option and command keys, launch iPhoto and rebuild your database
LN -
How to create a popup window that shows detail information when press submi
hi,all
how to create a popup window that shows detail information when press the submit button ?I mean,when I press the button "Sumit"there will appear a popup window that shows the detail information you typed before.it means are u sure to submit,it is like some confirmation window.
how to do achieve this ?help plz .
best regards
hlee
Edited by: hlee on 2011-4-15 上午1:26hey,vee
thanks for your response,but i had already read this thread before i put up a new question.any way,thanks.
best regards
hlee
Maybe you are looking for
-
CS2 won't open files from card reader
Suddenly CS2 on my eMac will not open files imported from CF card reader. I have tried two different card readers and three different CF cards with the same result: "Could not complete your request because of on unknown or invalid JPEG marker type is
-
Acrobat 7.0.9 and Reader 9 - Issues opening PDF in IE6
I'm hoping someone can help. All our users have Reader 9 installed as part of the corporate image. Some of our users run Acrobat 7.0.9 as well. For those users, we are experiencing issues where when we try to open a PDF in IE6. We get the followi
-
after restoring all my stuff to the new phone, i wanted to see my messages but i discovered that all my imessages are missing. i checked in settings and i dont know why but the new phone doesnt let me use my phone number for imessage or facetime, ins
-
"Exception occurred during event dispatching". Help me, Please!
Hi, All: when I runing my program, often catch below exception, I couldn't found where I'm wrong, and Why? Could you please, give the below exception and my code a quick search, and tell me how I to do it, and Why? sincerely yoursUrey Exception occur
-
How to send a report to corresponding client from the SSRS Report
Hi Friends, I have one requirement, I have multiple clients information in the report based on the Input client parameter it will show in the report. I want to schedule the report. I need to send a report only with the corresponding client informatio