My printers works fine on my home network but disappears on a remote desktop terminal connection

As I don't really know how to post a general addition to the knowledge base, I'm doing in Jeopardy style. Here is the question to the above answer. Well close enough.
Many people have reported all over the net issues with printers working just fine on their home network but disappearing when they connect to a server via RDT. There are some legit updates needed where windows did not see anything but LPT and COM ports for printer re-direction assignment. There are Mr. Fix it's for those and registry patches. When all of that fails, the information highway seems to dead end.
Here is what I learned today via 2 specific printers: HP1022 and HP2840 lasjerjets.
After many months of frustration and 7 1/2 hours with Microsoft advanced prof support I've finally pinned down this printer and a slew of others. This problem as far as I have come across deals exclusively with HP printers. In simple terms: the drivers are flawed. This 1022 is a prime example. It prints locally and via TCP/IP just fine. I have about 7 other printers and dummy printers in my printer folder. Enter a remote desktop session and ALL of them populate except the 1022. This shows that the hooks and RDT finders are locating your printers and installing them properly as remote printers. All except the 1022.
Log out of your RDT session: goto the local 1022 setup and change the printer driver to a PCL driver. I used a 1200 PCL driver. Now log back into your RDT server and hockus pocus! there is your printer. Totally un-usable because the driver will not run this printer. Caveat: each time I did this XP crashed (I couldn't get to the properties TAB anymore -- I had to un-install the 1022 and then re-install it with at least 1 reboot in the process)
Moving on we go to the HP OfficeJet/LajerJet2840. Same thing. It won't pass through as remote printer in RDT. Go local. Set the printer driver to AppleLaserWriter8500 and boom. (same logout, change, back in steps) and your LJ2840 shows up and works.
While I will have to wait until tomorrow I am betting that this will fix the exact same problem with the HP Officejet 8500A all in one with the exact same problem.
Hey HP? Whats with the drivers??
Another work around if you have a static enough environment is to install your local printer that will not show up under RDT on the server, and then point the port to your fixed IP on your router, and passthru port 9100 to your locally installed printer that is failing. You can now be on RDT and chooses the network printer that is printing to the TCP address of your home (or office) router.

Similar Messages

Airport Express/Mac work fine, Vista PC sees network, but will not connect

I have been working on this for two days. What can I do? I have the latest firmware on the airport express and my utilities are up to date on both PC and Vista (airport s/w ver 5.3.2). It all worked before. Also, my brother wireless printer sees network, but will not connect.

I have a similar issue. I have an AP Express set up for WPA2 Personal, G only. My Mac mini connects fine. My Dell mini9 with XP connects fine. My Dell desktop with Vista64 connects fine, but is local only, no internet.
I have completely reset the AP to factory settings and reconfigured it using the Vista machine, but still no luck. What is going on? Anyone?

Wifi problems with Apple devices, Microsoft devices work fine on my home network?

Starting two weeks back I noticed network speeds had slowed. In the house (2) ipads, (2) iphones, smart TV, Wii, (2) laptops. I manage the wifi connections by manually turning them off or on, so at a given point only (3) devices may connect to wifi router. Performance has gone from slow to non existent. I can connect to my SSID but cannot say stream to my IPADs or Iphones.
Power down reset cable modem and router
Tried renewing lease
Reset network settings
Recreated my Wifi connection (linksys router)
As I've stated my Wifi issues are only with my Apple devices and Windows laptops and other non apple devices access my Wifi network just fine. Any ideas

Click on the info button on the right of the Wi-fi your trying to connect to. I You should see a bunch of numbers under the IP Address, Subnet Mask, Router, DNS, etc. If not try pressing the static button. Wait for a few seconds and close out of it. Go back in and it will most likely default back DHCP. If not press DHCP, type in your password and it should re-recognize your router. Also try settings, general, reset on the very bottom of the general tab, and reset your network settings. One of these two should work. Good luck.

My ipod touch 4th gen was working fine thorugh my home speakers but now it has stopped

My ipod touch is a 4th gen 8GB and it was working absolutely fine 2 days ago when i played it through the same docking system but i came to play it through my docking system today and it is only playing out of its internal speakers and not through the speaker system.
It is nothing wrong with my speakers because my sister has an ipod and hers plays through it fine.
Help would be much appreciated
Thankyou

Hello BeeeGeee,
Try resetting your iPod Touch. To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
Then connect it to your dock again see if that helps.
B-rock

TS1398 My I pad is 14 motnhs old and previously worked fine on my home wireless network. All other devices work fine, but now, my I pads capability (range) is greatly reduced. Is there anything to check on the ipad for WIFI antenna strength?

My Ipad is 14 months old and previoulsy worked fine on my home wi fi network. Recently the range is diminished but all other devices (ipods, ps) are working just fine. Is there anything to check functionality of the wi fi antenna? Has anyone has similar problems? Unfortunately, the warranty expired 2 months ago.

My Ipad is 14 months old and previoulsy worked fine on my home wi fi network. Recently the range is diminished but all other devices (ipods, ps) are working just fine. Is there anything to check functionality of the wi fi antenna? Has anyone has similar problems? Unfortunately, the warranty expired 2 months ago.

Why doesn't Firefox Sync work in my home network, but at work?

Firefox Sync on my laptop does not work when my laptop is connected to my home network, but e.g. if I'm at my office.
The internet connection at my home is fine, I can surf the web with that very Firefox on both IPv4 and IPv6, DNS etc. is also working. Logging in to accounts.firefox.com also works, as does connecting Firefox to the Sync account. Only the process of syncing itself fails. On my desktop computer at home, I have exactly the same problems. When I open https://sync-209-us-west-2.sync.services.mozilla.com/ in a browser tab, I see a confirmation message that sync runs on that server, so apparently the network path between my computer and that server is free.
Upon investigation with Wireshark, I see the successful TLS handshake, then some packets from the client that are not answered and after some time the server closes the connection (Encrypted Alert). Apparently, no content is transferred between client and server. I attach a screenshot of how Wireshark sees the conversation between server and client (The image upload here didn't work so I put it on the web: http://ibin.co/1zXABHKdj5mA).
To exclude a possible misconfiguration or bad add-on, I created a clean new Firefox profile and connected it to my Firefox account, but this shows exactly the same problems.
Fun fact: Firefox on my Android phone does sync in my home network.
Below, I will link two log files, one successful sync (office network) and one failed sync (home network):
Sync @ office: http://pastebin.com/rZmfrbdL
Sync @ home: http://pastebin.com/a3KUCevJ

Any chance you are on a DS-Lite network at home? If so, what's your ISP? The home network symptoms look a little like https://bugzil.la/1118958

I am unable to get Lightroom Mobile to work on my home network. The Ipad says "There are no collections to sync, enable lightroom mobile on your computer", but it is enabled. I got it to work one time on another network but not at home where I use Lightr

I am unable to get Lightroom Mobile to work on my home network. The Ipad says "There are no collections to sync, enable lightroom mobile on your computer", but it is enabled. I got it to work one time on another network but not at home where I use Lightroom.

Hi,
could you please give us some info on what kind of network you have?
Can other application communicate with the web?
Thanks,
Ignacio

Home sharing is working fine for musics and videos but not for apps. What is wrong?

Home sharing is working fine for musics and videos but not for apps. What is wrong?

i had the same issue as everyone here after upgrading to itunes 10.x. vista could see xp home share. ipod touch could see xp home share.
neither could see vista home share.
after several hours of authorizing de-authorizing, rebooting router etc, i knew it had to be a firewall thingy with vista as xp was working fine
i went to this article http://support.apple.com/kb/ht2553 and followed the instructions. itunes was already in my vista exception list. on a hunch i deleted the itunes exception and followed the steps to add it again and boom it worked!! i could now see my vista machine from my ipod touch immediately.
something must have screwed up the firewall exception on the upgrade to itunes 10.x
it worked for me, i hope this helps others

IPhone 5s Unable to join home network but joins other networks?

As in the question above, I just got a brand new iPhone 5s that worked perfectly with my home wi-fi for about 5 hours untill it suddenly decided it didn't enjoy being connected to it and immediatly broke the connection. after that I tried getting it to connect - even resetting network setting and restarting both device and router- but still the same message comes up "Unable to connect to 'Network'". I would really love some help on how I can fix this besides going to genius bar or something like that since there aren't any in my country. and I doubt the place I bought it from would give me a refund or replace it. Keep in mind that it still connects to other networks. It's just my home network that it's having problems with. Also, other devices in my house are working just fine with the home network.

If your device is connecting with other wifi devices other than that of your home local wifi/router you need to be thinking strongly about what is going on with the device that you aren't connecting with. How far in distance are you from the wifi at your residence? How old is the router you're using at home? After resetting your network settings have you ensure you took the time to reset the password from your mobile device to match that of your home routers password? If your device is working elsewhere just fine and not at home you may want to start your troubleshooting more towards the router rather than the mobile device.

I recently installed an Airport Extreme 802.11N that I bought in May 2013. It replaced an Airport Extreme 802.11N that I bought in July 2007. My USB printer (Lexmark E350d) worked fine with the old Airport, but the printer won't work with the new one.

I recently installed an Airport Extreme 802.11N that I bought in May 2013. It replaced an Airport Extreme 802.11N that I bought in July 2007. My USB printer (Lexmark E350d) worked fine with the old Airport, but I'm having trouble with the new one. When I try to print, I get a USB Waiting message on the printer, and when I force a page to print by pressing Go on the printer, I get a page that says ERROR: syntaxerror OFFENDING COMMAND: true. . . .cvt . . . fpgm . . . x . . .lglyf . . . <..J head . . . STACK: / [ -mark- /sfnts I’ve tried shutting down the printer and disconnecting it and the Airport, but that doesn’t help. I reset the settings on the printer. I upgraded the Airport firmware and removed, reinstalled, and upgraded the Lexmark printer driver. After I upgraded the firmware and printer driver, a few pages printed correctly, but then I got the same syntax error page as before. Any suggestions for getting the printer to work correctly?

Use a powered USB hub between the AE and the printer.. the usb port does sometimes have issues.
Try deleting the printer in the Mac and reinstall it.. the change in AE can represent effectively a change of printer.. it is important to make sure that is all up to date.
Beyond that.. USB printers.. ughhh! Consider for two toners you can go and buy a proper network printer.

My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet".How can I change ip address?

My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet". If this is the root of the problem,how can I change ip address?
Ipad will connect no problem to other networks.

First thing you need I think is to get your iMac connected to the Internet.
Shut down your iMac and you iPad. Then power off your router. Wait 30 seconds and power up the router.
After the router indicates that it is connected to the Internet then start up your iMac and see if it connects. If the iMac connects to the Internet then your iPad should too.
If this power up sequence doesn't work you'll have to dig into the router setup to make sure it is working properly.

IMac at work, iMac at home. (Latest Yosemite and Apple Remote Desktop updates installed) Need to work from home at night. I don't know how to set my permissions so that I can just control my iMac at work.

iMac at work, iMac at home. (Latest Yosemite and Apple Remote Desktop updates installed) Need to work from home at night. I don't know how to set my permissions so that I can just control my iMac at work.

If they have set up port forwarding for you already then that is different. In that case, then you could be experiencing the bug with the most recent release of ARD (3.7.2) and in particular ARD 3.7.2 and Yosemite ARD version 3.8 clients. It has been reported numerous times in the forums and to Apple that since 3.7.2, clients are frequently unavailable to connect to despite there being no network issue between the remote computer and client computer. I have not seen anyone report it who was working from outside the LAN to inside the LAN, but I have the same issue with a number of my own computers that are simply on a different subnet, so it stands rot reason that it would happen from a port forwarding location.
I am sometimes able to resolve the issue locally by SSH connecting into the client computer using Terminal on my admin machine and restarting or relaunching the ARD agent on the remote device, then trying to connect to it again after about 30 seconds.
The Terminal commands for this procedure are as follows, though you might need to include a port number from outside the LAN:
First:
ssh ipaddress -l adminusername
(example: ssh 192.168.1.1 -l macadmin)
Second:
sudo /System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Resources/k ickstart -restart -agent
After that, waiting about 30 seconds and trying to observe or control usually works, though the computer may still fail to show an online or lit-up status indicator.

My Webpage works fine in Dreamweaver/Firefox & Safari but will not work correctly in IE. Help Please

Hi,
I uploaded my page from Dreamweaver yesterday and it works fine in Firefox and Safari, but when i opened it on Internet explorer, the bottom tables have moved and the image links at the top have a white boarder around.
Webpage link: http://www.gs-designproject.co.uk/home.html
any help greatly appreciated.
Thanks,
Gav

The white borders around your images are created because they're embedded in links. Add the following to your style sheet:
a img {
border: none;
The problem with the table row at the bottom is this:
<td colspan="760px" height="40" valign"middle"="">
The colspan attribute takes the number of columns that you're spanning, not a number of pixels. Judging from the rest of the table, it should be colspan="7".

I am renewed my cc subscription yesterday, and it works fine on my main computer, But my Second computer is telling me I need to renew my subscription, But when I go to the Adobe applications manager, my subscription isn't showing. Any idea how I can acti

I renewed my cc subscription yesterday, and it works fine on my main computer, But my Second computer is telling me I need to renew my subscription, But when I go to the Adobe applications manager, my subscription isn't showing. Any idea how I can activate my subscription on a second computer?

Does your Cloud subscription properly show on your account page?
If you have more than one email, are you sure you are using the correct Adobe ID?
https://www.adobe.com/account.html for subscriptions on your Adobe page
If yes
Some general information for a Cloud subscription
Cloud programs do not use serial numbers... you log in to your paid Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
-ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp
-http://helpx.adobe.com/creative-cloud/kb/license-this-software.html
If no
This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

Unable to access website using home network but able to access using school network.

Hi, I'm currently on a MacBook Pro running OS X Mountain Lion and Safari v6.0.4.
As per the title, I'm unable to access particular websites, namely abduzeedo.com and fromupnorth.com, using my home network but when I try to access using my school network, I can access it freely.
The error message I get is: "Safari can't open the page [website] because the server where this page is located isn't responding"
I've tried clearing my cache, resetting my IP, deleting the library file (or whatever it was that some people suggested in forums) but it still doesn't work ):
Any suggestions?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

My printers works fine on my home network but disappears on a remote desktop terminal connection

Similar Messages

Maybe you are looking for