Popups need to blocked while sending email.
I am using the code like below pastedu2026
How ever when I execute my program I am able to send mails to 3 different files successfully ( thanks for that ) and I am getting two popups.
One pop up says its title as u2018SAP connect Send Process : List of sent objectsu2019 and it is showing the list in popup.
When I press u2018ENTERu2019 on above pop up u2026
Another pop up says its title as u2018SAP office express infou2019 and in the popup there is F8 button followed Express document u201CCannot be sent: Errors of EDI 869 input file" received from auu201D and then pop has buttons below as enter, choose inbox buttons.
My functional consultant donu2019t want these two popups as he want to run this program in background mode.
How can I remove popus ?
Do I need to comment
PERFORM initiate_mail_execute_program. in my code ?
Please suggest me ?
Please suggest me how can I write the below code in a better manner ...
THANKS IN ADVANCE.
I am using the code like below pastedu2026
How ever when I execute the program I am able to send mails to 3 different files successfully and I am getting two popups.
One pop up says its title as u2018SAP connect Send Process : List of sent objectsu2019 and it is showing the list in popup.
When I press u2018ENTERu2019 on above pop up u2026
Another pop up says its title as u2018SAP office express infou2019 and in the popup there is F8 button followed Express document u201CCannot be sent: Errors of EDI 869 input file" received from auu201D and then pop has buttons as enter, choose inbox buttons.
My functional consultant donu2019t want these popups as he want to run this program in background mode.
How can I remove popus ?
FORM send_mail .
PERFORM populate_message_table.
PERFORM populate_error_table_869.
Send email message, although is not sent from SAP until mail send
program has been executed(rsconn01)
IF NOT gt_870_output_rec[] IS INITIAL.
PERFORM send_email_message.
ENDIF. " IF NOT gt_870_output_rec[] IS INITIAL.
IF NOT gt_870_err_rec[] IS INITIAL.
PERFORM send_email_error_870.
ENDIF. " IF NOT gt_870_err_rec[] IS INITIAL.
IF NOT gt_869_err_rec[] IS INITIAL.
PERFORM send_email_error_869.
ENDIF. " IF NOT gt_869_err_rec[] IS INITIAL.
Instructs mail send program for SAPCONNECT to send email(rsconn01)
PERFORM initiate_mail_execute_program.
ENDFORM. " SEND_MAIL
FORM POPULATE_MESSAGE_TABLE.
IF NOT gt_870_output_rec[] IS INITIAL.
LOOP AT gt_870_output_rec INTO wa_870_output_rec.
CASE wa_870_output_rec-rec_type.
WHEN 10.
CONCATENATE
wa_870_output_rec-rec_type
wa_870_output_rec-cntrl_no
wa_870_output_rec-filler
INTO it_message SEPARATED BY ';'.
APPEND it_message.
WHEN 20.
lv_870_output_order_qty = wa_870_output_rec-order_qty.
lv_870_output_rec-new_ord_qty = wa_870_output_rec-new_ord_qty.
CONCATENATE
wa_870_output_rec-rec_type
wa_870_output_rec-cntrl_no
wa_870_output_rec-edi_tr_par
lv_870_output_rec-new_ord_qty
INTO wa_message SEPARATED BY ';'.
CONDENSE wa_message NO-GAPS.
APPEND wa_message TO it_message.
WHEN 30.
CONCATENATE
wa_870_output_rec-rec_type
wa_870_output_rec-no_line_itm
wa_870_output_rec-time_stamp
INTO it_message SEPARATED BY ';'.
APPEND it_message.
ENDCASE.
ENDLOOP. " LOOP AT gt_870_output_rec INTO wa_870_output_rec.
ELSE. " IF gt_870_output_rec[] IS INITIAL.
ENDIF. " IF gt_870_output_rec[] IS INITIAL.
IF NOT gt_870_err_rec[] IS INITIAL.
LOOP AT gt_870_err_rec INTO wa_870_err_rec.
CASE wa_870_err_rec-rec_type.
WHEN 10.
CONCATENATE
wa_870_err_rec-rec_type
wa_870_err_rec-cntrl_no
wa_870_err_rec-error
wa_870_err_rec-filler
INTO it_message1 SEPARATED BY ';'.
APPEND it_message1.
WHEN 20.
lv_870_output_order_qty = wa_870_err_rec-order_qty.
lv_870_output_rec-new_ord_qty = wa_870_err_rec-new_ord_qty.
CONCATENATE
wa_870_err_rec-rec_type
wa_870_err_rec-cntrl_no
wa_870_err_rec-edi_tr_par
wa_870_err_rec-sap_cust_no
wa_870_err_rec-brd_idfr
wa_870_err_rec-po_no
wa_870_err_rec-cust_cntrt_po_no
lv_870_output_order_qty
lv_870_output_rec-new_ord_qty
INTO wa_message SEPARATED BY ';'.
CONDENSE wa_message NO-GAPS.
APPEND wa_message TO it_message1.
WHEN 30.
CONCATENATE
wa_870_err_rec-rec_type
wa_870_err_rec-cntrl_no
wa_870_err_rec-no_line_itm
wa_870_err_rec-time_stamp
INTO it_message1 SEPARATED BY ';'.
APPEND it_message1.
ENDCASE.
ENDLOOP. " LOOP AT gt_870_err_rec INTO wa_870_output_rec.
ELSE.
ENDIF. " IF NOT gt_870_err_rec[] IS INITIAL.
ENDFORM. " POPULATE_MESSAGE_TABLE
FORM POPULATE_ERROR_TABLE_869.
IF NOT gt_869_err_rec[] IS INITIAL.
LOOP AT gt_869_err_rec INTO wa_869_err_rec.
CASE wa_869_err_rec-rec_type.
WHEN 10.
CONCATENATE
wa_869_err_rec-rec_type
wa_869_err_rec-cntrl_no
wa_869_err_rec-store_no
wa_869_err_rec-error
wa_869_err_rec-filler
INTO it_message_869 SEPARATED BY ';'.
APPEND it_message_869.
WHEN 20.
CONCATENATE
wa_869_err_rec-rec_type
wa_869_err_rec-cntrl_no
wa_869_err_rec-vend_style
wa_869_err_rec-vend_size
wa_869_err_rec-error
wa_869_err_rec-filler
INTO it_message_869 SEPARATED BY ';'.
APPEND it_message_869.
WHEN 30.
CONCATENATE
wa_869_err_rec-rec_type
wa_869_err_rec-no_line_itm
wa_869_err_rec-time_stamp
INTO it_message_869 SEPARATED BY ';'.
APPEND it_message_869.
ENDCASE. " CASE wa_869_input_rec-rec_type.
ENDLOOP. " LOOP AT gt_869_err_rec INTO wa_869_err_rec.
ELSE.
ENDIF. " IF NOT gt_869_err_rec[] IS INITIAL.
endform. " POPULATE_ERROR_TABLE_869
FORM send_email_message.
Fill the document data.
gd_doc_data-doc_size = 1.
Populate the subject/generic message attributes
gd_doc_data-obj_langu = sy-langu.
gd_doc_data-obj_name = 'SAPRPT'.
gd_doc_data-obj_descr = 'Results of EDI 869 and 870'. " psubject.
gd_doc_data-sensitivty = 'F'.
Describe the body of the message
CLEAR it_packing_list.
REFRESH it_packing_list.
it_packing_list-transf_bin = space.
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES it_packing_list-body_num.
it_packing_list-doc_type = 'RAW'.
APPEND it_packing_list.
Add the recipients email address
CLEAR it_receivers.
REFRESH it_receivers.
it_receivers-receiver = email id
it_receivers-rec_type = 'U'.
it_receivers-com_type = 'INT'.
it_receivers-notif_del = 'X'.
it_receivers-notif_ndel = 'X'.
APPEND it_receivers.
it_receivers-receiver = email id
it_receivers-rec_type = 'U'.
it_receivers-com_type = 'INT'.
it_receivers-notif_del = 'X'.
it_receivers-notif_ndel = 'X'.
APPEND it_receivers.
Call the FM to post the message to SAPMAIL
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = gd_doc_data
put_in_outbox = 'X'
IMPORTING
sent_to_all = gd_sent_all
TABLES
packing_list = it_packing_list
contents_txt = it_message
receivers = it_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
IF sy-subrc EQ 0.
COMMIT WORK.
*-- DEQUEUE THE LOCK CREATED BY SO_OBJECT_SEND -
*call function 'SO_DEQUEUE_UPDATE_LOCKS'.
ENDIF.
Store function module return code
gd_error = sy-subrc.
Get it_receivers return code
LOOP AT it_receivers.
ENDLOOP.
ENDFORM. " SEND_EMAIL_MESSAGE
form SEND_EMAIL_ERROR_870 .
Fill the document data.
gd_doc_data-doc_size = 1.
Populate the subject/generic message attributes
gd_doc_data-obj_langu = sy-langu.
gd_doc_data-obj_name = 'SAPRPT'.
gd_doc_data-obj_descr = 'Errors of EDI 869 and 870'. " psubject.
gd_doc_data-sensitivty = 'F'.
Describe the body of the message
CLEAR it_packing_list.
REFRESH it_packing_list.
it_packing_list-transf_bin = space.
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
DESCRIBE TABLE it_message1 LINES it_packing_list-body_num.
it_packing_list-doc_type = 'RAW'.
APPEND it_packing_list.
Add the recipients email address
CLEAR it_receivers.
REFRESH it_receivers.
it_receivers-receiver = email id
it_receivers-rec_type = 'U'.
it_receivers-com_type = 'INT'.
it_receivers-notif_del = 'X'.
it_receivers-notif_ndel = 'X'.
APPEND it_receivers.
it_receivers-receiver = email id
it_receivers-rec_type = 'U'.
it_receivers-com_type = 'INT'.
it_receivers-notif_del = 'X'.
it_receivers-notif_ndel = 'X'.
APPEND it_receivers.
Call the FM to post the message to SAPMAIL
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = gd_doc_data
put_in_outbox = 'X'
IMPORTING
sent_to_all = gd_sent_all
TABLES
packing_list = it_packing_list
contents_txt = it_message1
receivers = it_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
IF sy-subrc EQ 0.
COMMIT WORK.
*-- DEQUEUE THE LOCK CREATED BY SO_OBJECT_SEND -
*call function 'SO_DEQUEUE_UPDATE_LOCKS'.
ENDIF.
Store function module return code
gd_error = sy-subrc.
Get it_receivers return code
LOOP AT it_receivers.
ENDLOOP.
endform. " SEND_EMAIL_ERROR_870
form SEND_EMAIL_ERROR_869 .
Fill the document data.
gd_doc_data-doc_size = 1.
Populate the subject/generic message attributes
gd_doc_data-obj_langu = sy-langu.
gd_doc_data-obj_name = 'SAPRPT'.
gd_doc_data-obj_descr = 'Errors of EDI 869 input file'. " psubject.
gd_doc_data-sensitivty = 'F'.
Describe the body of the message
CLEAR it_packing_list.
REFRESH it_packing_list.
it_packing_list-transf_bin = space.
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
DESCRIBE TABLE it_message_869 LINES it_packing_list-body_num.
it_packing_list-doc_type = 'RAW'.
APPEND it_packing_list.
Add the recipients email address
CLEAR it_receivers.
REFRESH it_receivers.
it_receivers-receiver = email id
it_receivers-rec_type = 'U'.
it_receivers-com_type = 'INT'.
it_receivers-notif_del = 'X'.
it_receivers-notif_ndel = 'X'.
APPEND it_receivers.
it_receivers-receiver = email id
it_receivers-rec_type = 'U'.
it_receivers-com_type = 'INT'.
it_receivers-notif_del = 'X'.
it_receivers-notif_ndel = 'X'.
APPEND it_receivers.
Call the FM to post the message to SAPMAIL
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = gd_doc_data
put_in_outbox = 'X'
IMPORTING
sent_to_all = gd_sent_all
TABLES
packing_list = it_packing_list
contents_txt = it_message_869
receivers = it_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
IF sy-subrc EQ 0.
COMMIT WORK.
*-- DEQUEUE THE LOCK CREATED BY SO_OBJECT_SEND -
*call function 'SO_DEQUEUE_UPDATE_LOCKS'.
ENDIF.
Store function module return code
gd_error = sy-subrc.
Get it_receivers return code
LOOP AT it_receivers.
ENDLOOP.
endform. " SEND_EMAIL_ERROR_869
FORM initiate_mail_execute_program.
WAIT UP TO 2 SECONDS.
IF gd_error EQ 0.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
ENDIF.
ENDFORM. " INITIATE_MAIL_EXECUTE_PROGRAM
How ever when I execute the program I am able to send mails to 3 different files successfully and I am getting two popups.
One pop up says its title as u2018SAP connect Send Process : List of sent objectsu2019 and it is showing the list in popup.
When I press u2018ENTERu2019 on above pop up u2026
Another pop up says its title as u2018SAP office express infou2019 and in the popup there is F8 button followed Express document u201CCannot be sent: Errors of EDI 869 input file" received from auu201D and then pop has buttons as enter, choose inbox buttons.
My functional consultant donu2019t want these popups as he want to run this program in background mode.
How can I remove popus ?
Similar Messages
-
Error while sending email to external mail - Urgent
Hi All,
I am getting error while sending email with attachement. The Error code is 02.
I am not able to identify the error. bold Please help me in solving this problem.
Is it anything wrong with the code or Any Configuration with SCOT/SOST.bold
the code i am using is :
REPORT YVR_F MESSAGE-ID XX .
TABLES : EDIDC, EDIDS, EDPAR.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME.
PARAMETERS : P_STATUS LIKE EDIDC-STATUS DEFAULT '51'.
SELECT-OPTIONS : S_DIRECT FOR EDIDC-DIRECT,
S_MESTYP FOR EDIDC-MESTYP,
S_CREDAT FOR EDIDC-CREDAT.
SELECTION-SCREEN END OF BLOCK B1 .
PARAMETER: P_EMAIL LIKE SOMLRECI1-RECEIVER,
P_SENDER LIKE SOMLRECI1-RECEIVER no-display,
P_DELSPL AS CHECKBOX,
P_ONLINE NO-DISPLAY.
DATA : TB_EDIDC LIKE STANDARD TABLE OF EDIDC INITIAL SIZE 0 WITH HEADER
LINE.
DATA : TB_EDPAR LIKE STANDARD TABLE OF EDPAR INITIAL SIZE 0 WITH HEADER
LINE.
DATA : TB_KNA1 LIKE STANDARD TABLE OF KNA1 INITIAL SIZE 0 WITH HEADER
LINE.
DATA : TB_ADRC LIKE STANDARD TABLE OF ADRC INITIAL SIZE 0 WITH HEADER
LINE.
DATA: INT_PDF TYPE TABLE OF TLINE WITH HEADER LINE.
DATA : BEGIN OF TB_ED OCCURS 0,
SNDPRN LIKE EDIDC-SNDPRN,
LOC LIKE ADRC-BUILDING,
DOCNUM LIKE EDIDC-DOCNUM,
IDOCTP LIKE EDIDC-IDOCTP,
MESTYP LIKE EDIDC-MESTYP,
DIRECT LIKE EDIDC-DIRECT,
CREDAT LIKE EDIDC-CREDAT,
STATUS LIKE EDIDC-STATUS,
END OF TB_ED.
DATA: IT_MESSAGE TYPE STANDARD TABLE OF SOLISTI1 INITIAL SIZE 0
WITH HEADER LINE.
DATA: IT_ATTACH TYPE STANDARD TABLE OF SOLISTI1 INITIAL SIZE 0
WITH HEADER LINE.
Job Runtime Parameters
DATA: GD_EVENTID LIKE TBTCM-EVENTID,
GD_EVENTPARM LIKE TBTCM-EVENTPARM,
GD_EXTERNAL_PROGRAM_ACTIVE LIKE TBTCM-XPGACTIVE,
GD_JOBCOUNT LIKE TBTCM-JOBCOUNT,
GD_JOBNAME LIKE TBTCM-JOBNAME,
GD_STEPCOUNT LIKE TBTCM-STEPCOUNT,
GD_ERROR TYPE SY-SUBRC,
GD_RECIEVER TYPE SY-SUBRC.
DATA: W_RECSIZE TYPE I,
W_SPOOL_NR LIKE SY-SPONO.
%_print LIKE pri_params.
DATA: GD_SUBJECT LIKE SODOCCHGI1-OBJ_DESCR,
IT_MESS_BOD LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
IT_MESS_ATT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
GD_SENDER_TYPE LIKE SOEXTRECI1-ADR_TYP,
GD_ATTACHMENT_DESC TYPE SO_OBJ_NAM,
GD_ATTACHMENT_NAME TYPE SO_OBJ_DES.
Spool to PDF conversions
DATA: GD_SPOOL_NR LIKE TSP01-RQIDENT,
GD_DESTINATION LIKE RLGRAP-FILENAME,
GD_BYTECOUNT LIKE TST01-DSIZE,
GD_BUFFER TYPE STRING.
Binary store for PDF
DATA: BEGIN OF IT_PDF_OUTPUT OCCURS 0.
INCLUDE STRUCTURE TLINE.
DATA: END OF IT_PDF_OUTPUT.
DATA: GD_RECSIZE TYPE I.
CONSTANTS: C_DEV LIKE SY-SYSID VALUE 'DEV',
C_NO(1) TYPE C VALUE ' ',
C_DEVICE(4) TYPE C VALUE 'LOCL'.
DATA: T_PACKING_LIST LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
T_CONTENTS LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
T_RECEIVERS LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
T_ATTACHMENT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
T_OBJECT_HEADER LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
W_CNT TYPE I,
W_SENT_ALL(1) TYPE C,
W_DOC_DATA LIKE SODOCCHGI1.
DATA : MSTR_PRINT_PARMS LIKE PRI_PARAMS,
MC_VALID,
P_REPID LIKE SY-REPID,
WF_ID LIKE TSP01-RQIDENT,
LOC_BYTECOUNT TYPE I.
*start-of-selection.
MSTR_PRINT_PARMS-PDEST = 'LOCL'.
P_REPID = SY-REPID.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
authority= ' '
COPIES = '1'
COVER_PAGE = SPACE
DATA_SET = SPACE
DEPARTMENT = SPACE
DESTINATION = 'LP01'
EXPIRATION = '1'
IMMEDIATELY = 'X'
LAYOUT = 'X_65_132'
MODE = SPACE
NEW_LIST_ID = 'X'
NO_DIALOG = 'X'
USER = SY-UNAME
IMPORTING
OUT_PARAMETERS = MSTR_PRINT_PARMS
VALID = MC_VALID
EXCEPTIONS
ARCHIVE_INFO_NOT_FOUND = 1
INVALID_PRINT_PARAMS = 2
INVALID_ARCHIVE_PARAMS = 3
OTHERS = 4.
SUBMIT (P_REPID) TO SAP-SPOOL WITHOUT SPOOL DYNPRO
SPOOL PARAMETERS MSTR_PRINT_PARMS.
AND RETURN.
NEW-PAGE PRINT ON NO DIALOG PARAMETERS
MSTR_PRINT_PARMS.
perform data.
NEW-PAGE PRINT OFF. "This marks the end of the screen for which the
*SPOOL NO WAS GENERATED.
WF_ID = SY-SPONO.
*converting spool to pdf
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
SRC_SPOOLID = WF_ID "SPOOL NUMBER
NO_DIALOG = SPACE
PDF_DESTINATION = 'X'
IMPORTING
PDF_BYTECOUNT =
LOC_BYTECOUNT "NUMBER OF BYTES TRANSFERRED
TABLES
PDF = INT_PDF "TABLE FOR PDF REPORT
EXCEPTIONS
ERR_NO_ABAP_SPOOLJOB = 1
ERR_NO_SPOOLJOB = 2
ERR_NO_PERMISSION = 3
ERR_CONV_NOT_POSSIBLE = 4
ERR_BAD_DESTDEVICE = 5
USER_CANCELLED = 6
ERR_SPOOLERROR = 7
ERR_TEMSEERROR = 8
ERR_BTCJOB_OPEN_FAILED = 9
ERR_BTCJOB_SUBMIT_FAILED = 10
ERR_BTCJOB_CLOSE_FAILED = 11
OTHERS = 12.
*CALL FUNCTION 'DOWNLOAD'
*EXPORTING
*bin_filesize = loc_bytecount "NO. OF BYTES
*filename = 'C:/EMAILPDF.PDF'
*filetype = 'BIN'
**IMPORTING
**act_filename = loc_filename
*TABLES
*data_tab = int_pdf.
IF P_DELSPL EQ 'X'.
PERFORM DELETE_SPOOL.
ENDIF.
Transfer the 132-long strings to 255-long strings
LOOP AT INT_PDF.
TRANSLATE INT_PDF USING ' ~'.
CONCATENATE GD_BUFFER INT_PDF INTO GD_BUFFER.
ENDLOOP.
TRANSLATE GD_BUFFER USING '~ '.
DO.
IT_MESS_ATT = GD_BUFFER.
APPEND IT_MESS_ATT.
SHIFT GD_BUFFER LEFT BY 255 PLACES.
IF GD_BUFFER IS INITIAL.
EXIT.
ENDIF.
ENDDO.
DESCRIBE TABLE IT_MESS_ATT LINES GD_RECSIZE.
CHECK GD_RECSIZE > 0.
PERFORM SENDMAIL USING P_EMAIL..
*& Form sendmail
text
--> p1 text
<-- p2 text
FORM SENDMAIL USING P_EMAIL.
CHECK NOT ( P_EMAIL IS INITIAL ).
REFRESH IT_MESS_BOD.
Default subject matter
GD_SUBJECT = 'Subject'.
GD_ATTACHMENT_DESC = 'IDOC LIST'.
CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
IT_MESS_BOD = 'List Of Failed Idocs'.
APPEND IT_MESS_BOD.
IT_MESS_BOD = 'List Of Failed Idocs'.
APPEND IT_MESS_BOD.
If no sender specified - default blank
IF P_SENDER EQ SPACE.
GD_SENDER_TYPE = SPACE.
ELSE.
GD_SENDER_TYPE = 'INT'.
ENDIF.
Send file by email as .xls speadsheet
PERFORM SEND_FILE_AS_EMAIL_ATTACHMENT
TABLES IT_MESS_BOD
IT_MESS_ATT
USING P_EMAIL
'Document attachment'
'PDF'
GD_ATTACHMENT_NAME
GD_ATTACHMENT_DESC
P_SENDER
GD_SENDER_TYPE
CHANGING GD_ERROR
GD_RECIEVER.
ENDFORM. " sendmail
*& Form DELETE_SPOOL
text
--> p1 text
<-- p2 text
FORM DELETE_SPOOL.
DATA: LD_SPOOL_NR TYPE TSP01_SP0R-RQID_CHAR.
LD_SPOOL_NR = WF_ID. "GD_SPOOL_NR.
CHECK P_DELSPL <> C_NO.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
EXPORTING
SPOOLID = LD_SPOOL_NR.
ENDFORM. " DELETE_SPOOL
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
text
-->P_IT_MESS_BOD text
-->P_IT_MESS_ATT text
-->P_P_EMAIL text
-->P_0846 text
-->P_0847 text
-->P_GD_ATTACHMENT_NAME text
-->P_GD_ATTACHMENT_DESC text
-->P_P_SENDER text
-->P_GD_SENDER_TYPE text
<--P_GD_ERROR text
<--P_GD_RECIEVER text
FORM SEND_FILE_AS_EMAIL_ATTACHMENT TABLES IT_MESSAGE
IT_ATTACH
USING P_EMAIL
P_MTITLE
P_FORMAT
P_FILENAME
P_ATTDESCRIPTION
P_SENDER_ADDRESS
P_SENDER_ADDRES_TYPE
CHANGING P_ERROR
P_RECIEVER.
DATA: LD_ERROR TYPE SY-SUBRC,
LD_RECIEVER TYPE SY-SUBRC,
LD_MTITLE LIKE SODOCCHGI1-OBJ_DESCR,
LD_EMAIL LIKE SOMLRECI1-RECEIVER,
LD_FORMAT TYPE SO_OBJ_TP ,
LD_ATTDESCRIPTION TYPE SO_OBJ_NAM ,
LD_ATTFILENAME TYPE SO_OBJ_DES ,
LD_SENDER_ADDRESS LIKE SOEXTRECI1-RECEIVER,
LD_SENDER_ADDRESS_TYPE LIKE SOEXTRECI1-ADR_TYP,
LD_RECEIVER LIKE SY-SUBRC.
DATA: T_PACKING_LIST LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
T_CONTENTS LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
T_RECEIVERS LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
T_ATTACHMENT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
T_OBJECT_HEADER LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
W_CNT TYPE I,
W_SENT_ALL(1) TYPE C,
W_DOC_DATA LIKE SODOCCHGI1.
LD_EMAIL = P_EMAIL.
LD_MTITLE = P_MTITLE.
LD_FORMAT = P_FORMAT.
LD_ATTDESCRIPTION = P_ATTDESCRIPTION.
LD_ATTFILENAME = P_FILENAME.
LD_SENDER_ADDRESS = P_SENDER.
LD_SENDER_ADDRESS_TYPE = P_SENDER_ADDRES_TYPE.
Fill the document data.
W_DOC_DATA-DOC_SIZE = 1.
Populate the subject/generic message attributes
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE .
W_DOC_DATA-SENSITIVTY = 'F'.
Fill the document data and get size of attachment
CLEAR W_DOC_DATA.
READ TABLE IT_ATTACH INDEX W_CNT.
W_DOC_DATA-DOC_SIZE =
( W_CNT - 1 ) * 255 + STRLEN( IT_ATTACH ).
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE.
W_DOC_DATA-SENSITIVTY = 'F'.
CLEAR T_ATTACHMENT.
REFRESH T_ATTACHMENT.
T_ATTACHMENT[] = IT_ATTACH[].
Describe the body of the message
CLEAR T_PACKING_LIST.
REFRESH T_PACKING_LIST.
T_PACKING_LIST-TRANSF_BIN = SPACE.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 0.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE IT_MESSAGE LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = 'RAW'.
APPEND T_PACKING_LIST.
Create attachment notification
T_PACKING_LIST-TRANSF_BIN = 'X'.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 1.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE T_ATTACHMENT LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = LD_FORMAT.
T_PACKING_LIST-OBJ_DESCR = LD_ATTDESCRIPTION.
T_PACKING_LIST-OBJ_NAME = LD_ATTFILENAME.
T_PACKING_LIST-DOC_SIZE = T_PACKING_LIST-BODY_NUM * 255.
APPEND T_PACKING_LIST.
Add the recipients email address
CLEAR T_RECEIVERS.
REFRESH T_RECEIVERS.
T_RECEIVERS-RECEIVER = p_EMAIL.
T_RECEIVERS-REC_TYPE = 'U'.
T_RECEIVERS-COM_TYPE = 'INT'.
T_RECEIVERS-NOTIF_DEL = 'X'.
T_RECEIVERS-NOTIF_NDEL = 'X'.
APPEND T_RECEIVERS.
DATA: objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE.
W_SENT_ALL = 'X'.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = W_DOC_DATA
PUT_IN_OUTBOX = 'X'
SENDER_ADDRESS = LD_SENDER_ADDRESS
SENDER_ADDRESS_TYPE = LD_SENDER_ADDRESS_TYPE
COMMIT_WORK = 'X'
IMPORTING
SENT_TO_ALL = W_SENT_ALL
TABLES
PACKING_LIST = T_PACKING_LIST
object_header = objhead
CONTENTS_BIN = T_ATTACHMENT
CONTENTS_TXT = IT_MESSAGE
RECEIVERS = T_RECEIVERS
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
OPERATION_NO_AUTHORIZATION = 4
OTHERS = 99.
IF SY-SUBRC NE 0.
MESSAGE E000 WITH 'Error occurred while sending'.
ELSE.
MESSAGE I000 WITH 'The document was sent'.
ENDIF.
ENDFORM. " SEND_FILE_AS_EMAIL_ATTACHMENT
*& Form data
text
--> p1 text
<-- p2 text
FORM data.
SELECT SNDPRN
DOCNUM
IDOCTP
MESTYP
DIRECT
CREDAT
STATUS
FROM EDIDC
INTO CORRESPONDING FIELDS
OF TABLE TB_EDIDC
WHERE STATUS = P_STATUS
AND MESTYP IN S_MESTYP
AND DIRECT IN S_DIRECT
AND CREDAT IN S_CREDAT.
SELECT KUNNR
INPNR
FROM EDPAR
INTO CORRESPONDING FIELDS
OF TABLE TB_EDPAR
FOR ALL ENTRIES IN TB_EDIDC
WHERE KUNNR = TB_EDIDC-SNDPRN.
SELECT KUNNR
ADRNR
FROM KNA1
INTO CORRESPONDING FIELDS
OF TABLE TB_KNA1
FOR ALL ENTRIES IN TB_EDPAR
WHERE KUNNR = TB_EDPAR-INPNR.
SELECT ADDRNUMBER
BUILDING
FROM ADRC
INTO CORRESPONDING FIELDS
OF TABLE TB_ADRC
FOR ALL ENTRIES IN TB_KNA1
WHERE ADDRNUMBER = TB_KNA1-ADRNR.
LOOP AT TB_EDIDC WHERE STATUS = P_STATUS
AND MESTYP IN S_MESTYP
AND DIRECT IN S_DIRECT
AND CREDAT IN S_CREDAT.
TB_ED-SNDPRN = TB_EDIDC-SNDPRN.
TB_ED-DOCNUM = TB_EDIDC-DOCNUM.
TB_ED-IDOCTP = TB_EDIDC-IDOCTP.
TB_ED-MESTYP = TB_EDIDC-MESTYP.
TB_ED-DIRECT = TB_EDIDC-DIRECT.
TB_ED-CREDAT = TB_EDIDC-CREDAT.
TB_ED-STATUS = TB_EDIDC-STATUS.
READ TABLE TB_EDPAR WITH KEY KUNNR = TB_EDIDC-SNDPRN.
READ TABLE TB_KNA1 WITH KEY KUNNR = TB_EDPAR-INPNR.
READ TABLE TB_ADRC WITH KEY ADDRNUMBER = TB_KNA1-ADRNR.
TB_ED-LOC = TB_ADRC-BUILDING.
APPEND TB_ED.
ENDLOOP.
WRITE :/02 'CustomerNo',
15 'Location Code',
30 'Idoc Number',
55 'Basic Type',
70 'Message Type',
95 'Direction',
110 'Received Date',
130 'Status'.
ULINE.
LOOP AT TB_ED.
WRITE :/02 TB_ED-SNDPRN,
15 TB_ED-LOC,
30 TB_ED-DOCNUM,
55 TB_ED-IDOCTP,
70 TB_ED-MESTYP,
95 TB_ED-DIRECT,
110 TB_ED-CREDAT,
130 TB_ED-STATUS.
ENDLOOP.
ENDFORM. " data
Kindly help me in solving the issue.
Thanks in advance.
Suki.Hi,
Check in transaction SCOT. If your mail is in error status in SCOT, you can assure that there is no problem with your code. If your message has not reached till SCOT, then the problem will be with the code.
If the mail is there in scot with error status tell the BASIS to configure it. I feel this could be the problem.
Regards,
Renjith Michael. -
I need to block someone from emailing me, it is important that they receive an undelivered message when they attempt to email me. Can this be done? I do not mind deleting the whole account and starting again, but i have not found a way as of yet.
You can go to the Mail page at http://icloud.com , click on the cogwheel icon at top right, choose 'Rules' and set up a rule that moves all messages from this person to the Trash. However there's no way of producing an 'undelivered' message.
As to deleting the account, this isn't possible; you can abandon using it and start another. If you do this, messages to it will pile up until the storage limit is filled, at which point they will be bounced with an 'Account over limit' message. Alternatively you could set up a 'Vacation message' in the Preferences which would inform anyone sending to that address that it was no longer in use. -
Skip Terms and Conditions while sending Email
Hello Experts,
I have a requirement to print the line items of Sales order in front page and Terms and Conditions on back of every page. I need to send the same document as an Email, but without Terms and Conditions.
I could achieve printing part by creating another Master Page for Terms and Conditions and by enabling the page set to print on both sides and there by setting front page and back page properties.
But I could not avoid the back page template while sending email..
Could you please help me to let me know, where I am commiting mistake or else please suggest me if any other method is available for this requirement.
Thanks,
RakeshThanks Andres, for your reply. I accept your solution will definetly work, but client over here, will not accept maintaining two objects of similar kind.
Thanks,
Rakesh -
MailServiceHelper Failed while sending email java.lang.NullPointerException
Hi guys,
I am trying to send email with Adobe CQ API.
But i am getting a nullpointer exception at this line: MsgGateway.send(htmlEmail);
This is my method that i am using to send.
import com.day.cq.mailer.MessageGateway;
import com.day.cq.mailer.MessageGatewayService;
import javax.mail.internet.InternetAddress;
public boolean sendHtmlEmail(SlingHttpServletRequest sling,
String fromMailAdress, List<String> recepientmailAddress,
String emailSubject, String htmlbodyMail) {
HtmlEmail htmlEmail = new HtmlEmail();
List<InternetAddress> emailAddress = new ArrayList<InternetAddress>();
try {
for (String recipient : recepientmailAddress) {
if (!StringUtil.isEmpty(recipient)) {
emailAddress.add(new InternetAddress(recipient));
log.error(recipient);
if (!StringUtil.isEmpty(fromMailAdress)) {
htmlEmail.setFrom(fromMailAdress);
htmlEmail.setTo(emailAddress);
htmlEmail.setSubject(emailSubject);
htmlEmail.setHtmlMsg(htmlbodyMail);
htmlEmail.setCharset("utf-8");
MessageGatewayService MsgService = getMessageGateWayService(sling);
MessageGateway<HtmlEmail> MsgGateway = MsgService.getGateway(HtmlEmail.class);
MsgGateway.send(htmlEmail); //nullpointer exception caught here
return true;
} catch (Exception e) {
log.error("Failed while sending email", e);
return false;
I have checked to ensure the bundle com.day.cq.cq-mail and my own bundle is running .
I am also sure that 'htmlEmail' is not null by retrieving the email subject via .getSubject and it did return me the subject.
I do not understand what is returning the nullpointerexception.
Thanks in advance !The MessageGateway instance (MessageGateway<HtmlEmail> MsgGateway) is null therby throwing a null pointer.
Instead of instanciating msgGateway as :
MessageGatewayService MsgService = getMessageGateWayService(sling);
MessageGateway<HtmlEmail> MsgGateway = MsgService.getGateway(HtmlEmail.class);
Inject your MessageGateway as:
@Reference
private MessageGateway<HtmlEmail> msgGateway;
and then call send on msgGateway as msgGateway.send(htmlEmail)
~ Aditya -
Error while sending email using TemplateEmailSender in CSC server
Hi,
We are trying to send email using TemplateEmailSender from CSC server. But it is giving Null Pointer Exception in ProfiledMessageSource like below. The same code is working fine in commerce instance but it is failing in CSC instance. We are using ATG2007.1p3
Any pointers would be helpful.
Below is the error.
Error while sending email
java.lang.NullPointerException
at atg.userprofiling.dms.ProfiledMessageSource.isConfiguredForProfileSubject(ProfiledMessageSource.java:196)
at atg.userprofiling.dms.DPSMessageSource.fireEndSessionMessage(DPSMessageSource.java:864)
at atg.userprofiling.dms.DPSMessageSource.fireEndSessionMessage(DPSMessageSource.java:848)
at atg.userprofiling.SessionEventTrigger.nameContextElementPreUnbound(SessionEventTrigger.java:553)
at atg.nucleus.GenericContext.sendPreUnboundEvent(GenericContext.java:200)
at atg.nucleus.GenericContext.preNotifyRemovedObject(GenericContext.java:528)
at atg.nucleus.GenericContext.removeElement(GenericContext.java:566)
at atg.servlet.SessionNameContext.unbindFromNameContext(SessionNameContext.java:557)
at atg.servlet.SessionNameContext.stopSession(SessionNameContext.java:534)
at atg.servlet.SessionNameContext.decrementWrapperCount(SessionNameContext.java:242)
at atg.servlet.SessionBindingReporter.valueUnbound(SessionBindingReporter.java:206)
at org.apache.catalina.session.StandardSession.removeAttributeInternal(StandardSession.java:1625)
at org.apache.catalina.session.StandardSession.expire(StandardSession.java:749)
at org.apache.catalina.session.StandardSession.expire(StandardSession.java:655)
at org.apache.catalina.session.StandardSession.invalidate(StandardSession.java:1100)
at org.apache.catalina.session.StandardSessionFacade.invalidate(StandardSessionFacade.java:150)
at atg.userprofiling.email.TemplateInvoker$TemplateSession.endSession(TemplateInvoker.java:935)
at atg.userprofiling.email.TemplateEmailSender.createMessage(TemplateEmailSender.java:2387)Thanks for the reply.
My issue is fixed now. It is JBOSS configuration issue. Sessions are not maintained properly that's why we are getting NULL profile in the session. Our application has multiple WARs so we fixed it by setting emptySessionPath to TRUE. If emptySessionPath attribute in server.xml is false, then each WAR will have its own jsessionid cookie.
I did not touch ProfiledMessageSource as its required for session triggering. -
Authentication Error while Sending Email from SMTP server.
Authentication Error while Sending Email from SMTP server. Can receive emails but cannot send emails from this account.
no email account was setup on the phone unless it was issued by your company.
gmail is required but no server address ports to enter.
my gmail account was setup before i took delivery of the phone but could have been done when phone was activated.
i added cox pop3 email and had to manually enter both pop3 and smtp servers with both boxes checked on both servers.
i doubt if it's a verizon issue. -
How do I create a dropdown in the Subject Line field while sending emails.
How do I create a dropdown in the Subject Line field while sending emails as I send more than 300 emails with the same subject line everyday.
Which webmail service do you use, gmail may have problems currently see thread
'' Subject autofill feature stopped working in gmail for new subjects only - and I'm not the only one - help! {[https://support.mozilla.com/en-US/questions/793610 link]]''
For general information see [[form autocomplete]] and [[Form autocomplete entries are not saved ]] -
Reader XI: An Error Occurred While Sending Email
Please help. I am working on a Windows XP computer (SP3, fully updated) with Microsoft Office Outlook set as the default email.
I recently updated this computer to Adobe Reader XI. Whenever the user tries to "Send File as Eamil Attachment" (either using the button or using the File menue option) they get an Adobe Reader message "An error occured while sending email."
I've checked every setting I can think of. Under Preferences - Internet - Internet Settings - Programs, her email is set as Outlook. I tried uninstalling and reinstalling Adobe. I've tried removing and re-adding the Outlook account. I've chcekd for viruses and malware. What else could be causing this problem? I haven't seen this happen on any of our other XP machines.hi,
I have updated from reader x to xi, now outlook 2010 users can no longer attach emails, this use to work fine. I posted this issue elsewhere where someone had trouble with outlook 2003. Outlook either opens up with no attachment or nothing happens at all.
If can help
thanks
Robert -
String gets added to the name of the PDF while sending email
Hi,
I am generating a PDF from a smartform. When i click on the email button on the PDF, it opens outlook with the PDF in the attachment. But i can see some string gets added to the begining of the name of PDF for example if i have named the PDF as 18000012 then while sending email from PDF i can see the name as XXXXX1800012.pdf as the attachment. Is there any way by which i can remove that string.
Thanks,
SonalYou can use text variables in the report description
-
How to set attched file name while sending email through ABAP
Hi All- tell me how to set attched file name while sending email through ABAP.
regards...
AbhaySure, when you are adding your entry to the packing list, give the name in the obj_name field.
*File 2
mailbin = 'This is file 2'.
append mailbin.
data: start type i.
data: end type i.
start = tab_lines + 1.
describe table mailbin lines end.
mailpack-transf_bin = 'X'.
mailpack-head_start = 1.
mailpack-head_num = 1.
mailpack-body_start = start.
mailpack-body_num = end.
mailpack-doc_type = 'TXT'.
mailpack-obj_name = 'TEST2'. "<- RIGHT HERE
mailpack-obj_descr = 'Subject'.
mailpack-doc_size = tab_lines * 255.
append mailpack.
Regards,
RIch Heilman -
Emails getting blocked while sending by Blocklist1
Hi
i have setup my exchange 2010 server, i have problem sending emails to one of my client. Below is the error,
TX2EHSMHS037.bigfish.com rejected your message to the following e-mail addresses:
[email protected] ([email protected])
TX2EHSMHS037.bigfish.com gave this error:
Service unavailable; Client host [94.2xx.1xx.xxx] blocked using Blocklist 1, mail from IP banned; To request removal from this list please forward this message to [email protected] and include your ip address 94.2xx.1xx.xxx .
Your message wasn't delivered due to a permission or security issue. It may have been rejected by a moderator, the address may only accept e-mail from certain senders, or another restriction may be preventing delivery.
Kindly suggest, ThanksHi,
Please use http://mxtoolbox.com/blacklists.aspx to verify whether we are in the blacklist.
If it is the case, please contact bigfish.com domain to accept our domain.
If not, please contact our ISP for help.
Found a similar thread for your reference:
bigfish.com rejected your message - Service unavailable; client host x.x.x.x blocked using Blocklist1, mail from IP banned
http://social.technet.microsoft.com/Forums/en-US/5eee56d4-7b0f-479b-bea4-acba94be3aa9/bigfishcom-rejected-your-message-service-unavailable-client-host-xxxx-blocked-using?forum=smallbusinessserver
Disclaimer:
Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software of information found there. Please make sure
that you completely understand the risk before retrieving any suggestions from the above link.
Hope it is helpful
Thanks
Mavis
Mavis Huang
TechNet Community Support -
To avoid the attachment for the body content while sending email from ABAP
SAP Version : 4.7
When i tried to send an external email from the abap report program, the body content of the mail is coming as an attachment for the same. I need to avoid this. Please give the suggestion. Am attaching the code.
DECLARATION PART *
TYPE-POOLS : SLIS.
TABLES : VBAK.
DECLARATION FOR ALV.
DATA : F_FIELD TYPE SLIS_T_FIELDCAT_ALV,
W_FIELD TYPE SLIS_FIELDCAT_ALV,
L_HEADER TYPE SLIS_T_LISTHEADER,
W_HEADER TYPE SLIS_LISTHEADER,
W_LAYOUT TYPE SLIS_LAYOUT_ALV,
t_sort type slis_t_sortinfo_alv,
w_sort type slis_sortinfo_alv.
TYPES : BEGIN OF T_VBAK,
VBELN LIKE VBAK-VBELN,
VKGRP LIKE VBAK-VKGRP,
KUNNR LIKE VBAK-KUNNR,
ERDAT LIKE VBAK-ERDAT,
VTWEG LIKE VBAK-VTWEG,
LIFSK LIKE VBAK-LIFSK,
VKBUR LIKE VBAK-VKBUR,
END OF T_VBAK.
TYPES : BEGIN OF T_VBAP,
VBELN LIKE VBAP-VBELN,
POSNR LIKE VBAP-POSNR,
MATNR LIKE VBAP-MATNR,
WERKS LIKE VBAP-WERKS,
ARKTX LIKE VBAP-ARKTX,
KWMENG LIKE VBAP-KWMENG,
CUOBJ LIKE VBAP-CUOBJ,
NETWR LIKE VBAP-NETWR,
ZSCHL_K LIKE VBAP-ZSCHL_K,
KONDM LIKE VBAP-KONDM,
ZZURWN LIKE VBAP-ZZURWN,
END OF T_VBAP.
TYPES : BEGIN OF T_LIPS,
VBELN LIKE LIPS-VBELN,
POSNR LIKE LIPS-POSNR,
VGBEL LIKE LIPS-VGBEL,
VGPOS LIKE LIPS-VGPOS,
END OF T_LIPS.
TYPES : BEGIN OF T_KNA1,
KUNNR LIKE KNA1-KUNNR,
NAME1 LIKE KNA1-NAME1,
ADRNR LIKE KNA1-ADRNR,
END OF T_KNA1.
TYPES : BEGIN OF T_VBKD,
VBELN LIKE VBKD-VBELN,
POSNR LIKE VBKD-POSNR,
BSTKD LIKE VBKD-BSTKD,
BSTDK LIKE VBKD-BSTDK,
KURSK LIKE VBKD-KURSK, " CURRENCY CHECK
BZIRK LIKE VBKD-BZIRK, " SALES DISTRICT
KDGRP LIKE VBKD-KDGRP,
IHREZ LIKE VBKD-IHREZ,
END OF T_VBKD.
TYPES : BEGIN OF T_LIKP,
VBELN LIKE LIKP-VBELN,
ERDAT LIKE LIKP-ERDAT,
END OF T_LIKP.
TYPES : BEGIN OF T_ADR6,
ADDRNUMBER LIKE ADR6-ADDRNUMBER,
SMTP_ADDR LIKE ADR6-SMTP_ADDR,
END OF T_ADR6.
DATA : BEGIN OF IT_CUST OCCURS 0,
KUNNR LIKE VBAK-KUNNR,
END OF IT_CUST.
TYPES : BEGIN OF T_VBUP,
VBELN LIKE VBUP-VBELN,
POSNR LIKE VBUP-POSNR,
KOSTA LIKE VBUP-KOSTA,
WBSTA LIKE VBUP-WBSTA,
END OF T_VBUP.
TYPES : BEGIN OF T_TVLST,
LIFSP LIKE TVLST-LIFSP,
VTEXT LIKE TVLST-VTEXT,
END OF T_TVLST.
TYPES : BEGIN OF T_CONFIG.
INCLUDE STRUCTURE CONF_OUT.
TYPES : END OF T_CONFIG.
DATA : TMP LIKE VBAK-KUNNR.
DATA : NAME_TEXT LIKE THEAD-TDNAME.
DATA : TLINE1 LIKE TLINE OCCURS 0 WITH HEADER LINE.
DATA : TMP_BRAKET LIKE CONF_OUT-ATWRT,
TMP_BRAKET1 LIKE CONF_OUT-ATWRT.
DATA : BEGIN OF IT_FINAL OCCURS 0,
WERKS LIKE VBAP-WERKS,
VBELN LIKE VBAP-VBELN,
POSNR LIKE VBAP-POSNR,
KUNNR LIKE VBAK-KUNNR,
NAME1 LIKE KNA1-NAME1,
VBELN1 LIKE LIKP-VBELN,
ERDAT LIKE LIKP-ERDAT,
LIFSK LIKE VBAK-LIFSK,
ZZURWN LIKE VBAP-ZZURWN,
IHREZ LIKE VBKD-IHREZ,
ERDAT1 LIKE VBAK-ERDAT,
NETWR(25) type C,
BSTKD LIKE VBKD-BSTKD,
BSTDK LIKE VBKD-BSTDK,
SALORD(17) TYPE C,
PUMP_TYPE LIKE CONF_OUT-ATWRT,
PUMP_SIZE LIKE CONF_OUT-ATWRT,
VTEXT LIKE TVLST-VTEXT,
KWMENG(25) TYPE C,
FOOTER(330) TYPE C,
ITMTXT(330) TYPE C,
END OF IT_FINAL.
DATA : IT_VBAK TYPE STANDARD TABLE OF T_VBAK,
IT_VBAP TYPE STANDARD TABLE OF T_VBAP,
IT_VBKD TYPE STANDARD TABLE OF T_VBKD,
IT_LIKP TYPE STANDARD TABLE OF T_LIKP,
IT_LIPS TYPE STANDARD TABLE OF T_LIPS,
IT_VBUP TYPE STANDARD TABLE OF T_VBUP,
IT_KNA1 TYPE STANDARD TABLE OF T_KNA1,
IT_ADR6 TYPE STANDARD TABLE OF T_ADR6,
IT_FINAL1 LIKE IT_FINAL OCCURS 0 with header line,
IT_TVLST TYPE STANDARD TABLE OF T_TVLST,
IT_CONFIG TYPE STANDARD TABLE OF T_CONFIG,
W_VBAK TYPE T_VBAK,
W_VBAP TYPE T_VBAP,
W_VBKD TYPE T_VBKD,
W_LIKP TYPE T_LIKP,
W_ADR6 TYPE T_ADR6,
W_LIPS TYPE T_LIPS,
W_VBUP TYPE T_VBUP,
W_KNA1 TYPE T_KNA1,
W_TVLST TYPE T_TVLST,
W_CONFIG TYPE T_CONFIG.
DATA: it_message TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
WITH HEADER LINE.
DATA: it_attach TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
WITH HEADER LINE.
DATA: t_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
t_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
t_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_object_header LIKE solisti1 OCCURS 0 WITH HEADER LINE,
w_cnt TYPE i,
w_sent_all(1) TYPE c,
w_doc_data LIKE sodocchgi1,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
SELECTION-CRITERIA *
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS : R2 RADIOBUTTON GROUP G1 USER-COMMAND radio DEFAULT 'X',
R1 RADIOBUTTON GROUP G1 .
selection-screen end of block b1.
selection-screen begin of block b2 with frame title text-002.
PARAMETERS: p_email TYPE somlreci1-receiver
DEFAULT '[email protected]'.
PARAMETERS : P_VTWEG LIKE W_VBAK-VTWEG ,
P_WERKS LIKE W_VBAP-WERKS.
select-options : s_vkgrp for w_vbak-vkgrp,
s_ERDAT for w_LIKP-ERDAT.
selection-screen end of block b2.
Initialization
INITIALIZATION.
s_vkgrp-sign = 'I'.
s_vkgrp-option = 'BT'.
s_vkgrp-low = '313'.
s_vkgrp-high = '324'.
APPEND s_vkgrp.
s_erdat-sign = 'I'.
s_erdat-option = 'BT'.
s_erdat-low = '20080108'.
s_erdat-high = '20080108'.
s_erdat-low = '20070101'.
s_erdat-high = sy-datum.
APPEND s_erdat.
selection-screen validations
AT SELECTION-SCREEN.
Validation for Plant.
IF p_werks NE '7210'.
MESSAGE : 'Plant entered should be 7210' TYPE 'E'.
ENDIF.
START OF SELECTION *
start-of-selection.
GETTING THE DATA FROM THE DATABASE TABLE
PERFORM DATA_FETCH.
FILLING THE FINAL INTERNAL TABLE
PERFORM FILL_FINAL.
GETTING THE LIST FOR SENDING MAIL OR DISPLAY.
IF R1 = 'X'.
Populate table with details to be entered into .xls file
LOOP AT IT_CUST.
PERFORM build_xls_data_table using it_cust-kunnr.
ENDLOOP.
Instructs mail send program for SAPCONNECT to send email(rsconn01)
PERFORM initiate_mail_execute_program.
ELSEIF R2 = 'X'.
PERFORM LIST_DISPLAY.
ENDIF.
END OF SELECTION *
end-of-selection.
*& Form DATA_FETCH
text
--> p1 text
<-- p2 text
FORM DATA_FETCH .
SELECT VBELN
VKGRP
KUNNR
ERDAT
VTWEG
LIFSK
VKBUR
INTO TABLE IT_VBAK
FROM VBAK
WHERE VTWEG = P_VTWEG
AND VKGRP IN S_VKGRP
AND LIFSK NE ''.
IF IT_VBAK[] IS NOT INITIAL.
SELECT LIFSP
VTEXT
INTO TABLE IT_TVLST
FROM TVLST
FOR ALL ENTRIES IN IT_VBAK
WHERE LIFSP = IT_VBAK-LIFSK
AND SPRAS = 'EN'.
SELECT VBELN
POSNR
MATNR
WERKS
ARKTX
KWMENG
CUOBJ
NETWR
ZSCHL_K
KONDM
ZZURWN
INTO TABLE IT_VBAP
FROM VBAP
FOR ALL ENTRIES IN IT_VBAK
WHERE VBELN = IT_VBAK-VBELN
AND WERKS = P_WERKS.
SELECT KUNNR
NAME1
ADRNR
INTO TABLE IT_KNA1
FROM KNA1
FOR ALL ENTRIES IN IT_VBAK
WHERE KUNNR = IT_VBAK-KUNNR.
SELECT VBELN
POSNR
BSTKD
BSTDK
KURSK
BZIRK
KDGRP
INTO TABLE IT_VBKD
FROM VBKD
FOR ALL ENTRIES IN IT_VBAK
WHERE VBELN = IT_VBAK-VBELN.
ENDIF.
IF IT_VBAP[] IS NOT INITIAL.
SELECT VBELN
POSNR
VGBEL
VGPOS
INTO TABLE IT_LIPS
FROM LIPS
FOR ALL ENTRIES IN IT_VBAP
WHERE VGBEL = IT_VBAP-VBELN
AND VGPOS = IT_VBAP-POSNR.
ENDIF.
IF IT_LIPS[] IS NOT INITIAL.
SELECT VBELN
ERDAT
INTO TABLE IT_LIKP
FROM LIKP
FOR ALL ENTRIES IN IT_LIPS
WHERE VBELN = IT_LIPS-VBELN
AND ERDAT IN S_ERDAT.
SELECT VBELN
POSNR
KOSTA
WBSTA
INTO TABLE IT_VBUP
FROM VBUP
FOR ALL ENTRIES IN IT_LIPS
WHERE VBELN = IT_LIPS-VBELN
AND POSNR = IT_LIPS-POSNR
AND KOSTA EQ 'C'
AND WBSTA NE 'C'.
ENDIF.
IF IT_KNA1[] IS NOT INITIAL.
SELECT ADDRNUMBER
SMTP_ADDR
INTO TABLE IT_ADR6
FROM ADR6
FOR ALL ENTRIES IN IT_KNA1
WHERE ADDRNUMBER = IT_KNA1-ADRNR.
ENDIF.
ENDFORM. " DATA_FETCH
*& Form LIST_DISPLAY
text
--> p1 text
<-- p2 text
FORM LIST_DISPLAY .
REFRESH F_FIELD.
IF R2 = 'X'.
W_FIELD-col_pos = 1.
W_FIELD-fieldname = 'WERKS'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C410'.
W_FIELD-seltext_m = 'Plant'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 2.
W_FIELD-fieldname = 'VBELN'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C410'.
W_FIELD-seltext_m = 'Sales Order'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 3.
W_FIELD-fieldname = 'KUNNR'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C410'.
W_FIELD-seltext_m = 'Customer Code'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 4.
W_FIELD-fieldname = 'NAME1'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C410'.
W_FIELD-seltext_m = 'Customer Name'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 5.
W_FIELD-fieldname = 'VBELN1'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C410'.
W_FIELD-seltext_m = 'Delivery Number'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 6.
W_FIELD-fieldname = 'ERDAT'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C410'.
W_FIELD-seltext_m = 'Delivery Date'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 7.
W_FIELD-fieldname = 'LIFSK'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C410'.
W_FIELD-seltext_m = 'Delivery Block'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 8.
W_FIELD-fieldname = 'PUMP_TYPE'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C410'.
W_FIELD-seltext_m = 'Pump Type'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 9.
W_FIELD-fieldname = 'PUMP_SIZE'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C410'.
W_FIELD-seltext_l = 'Pump Size'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 10.
W_FIELD-fieldname = 'ZZURWN'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C410'.
W_FIELD-seltext_m = 'Pump Srno'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 11.
W_FIELD-fieldname = 'IHREZ'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C410'.
W_FIELD-seltext_m = 'Indent No.'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 12.
W_FIELD-fieldname = 'ERDAT'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C410'.
W_FIELD-seltext_m = 'Order Booking Dt'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 13.
W_FIELD-fieldname = 'NETWR'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C710'.
W_FIELD-seltext_m = 'Net Value'.
w_field-do_sum = 'X'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 14.
W_FIELD-fieldname = 'KWMENG'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C710'.
W_FIELD-seltext_m = 'Qty'.
w_field-do_sum = 'X'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 15.
W_FIELD-fieldname = 'BSTKD'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C410'.
W_FIELD-seltext_m = 'Customer PONO'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 16.
W_FIELD-fieldname = 'BSTDK'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C410'.
W_FIELD-seltext_m = 'Customer PODT'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 17.
W_FIELD-fieldname = 'SALORD'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C410'.
W_FIELD-seltext_m = 'Sales Order/Item'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 18.
W_FIELD-fieldname = 'VTEXT'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C410'.
W_FIELD-seltext_m = 'Delivery Block Desc.'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 19.
W_FIELD-fieldname = 'FOOTER'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C410'.
W_FIELD-seltext_m = 'Footer Text'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 20.
W_FIELD-fieldname = 'ITMTXT'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C410'.
W_FIELD-seltext_m = 'Item Text'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
PERFORM SORT_FIELD.
PERFORM LAYOUT_DISPLAY.
PERFORM GRID_DISPLAY.
ENDIF.
ENDFORM. " LIST_DISPLAY
*& Form FILL_FINAL
text
--> p1 text
<-- p2 text
FORM FILL_FINAL .
REFRESH IT_FINAL.
LOOP AT IT_VBUP INTO W_VBUP.
READ TABLE IT_LIPS INTO W_LIPS WITH KEY VBELN = W_VBUP-VBELN POSNR = W_VBUP-POSNR.
READ TABLE IT_LIKP INTO W_LIKP WITH KEY VBELN = W_LIPS-VBELN.
IF SY-SUBRC EQ 0.
READ TABLE IT_VBAP INTO W_VBAP WITH KEY VBELN = W_LIPS-VGBEL POSNR = W_LIPS-VGPOS.
READ TABLE IT_VBAK INTO W_VBAK WITH KEY VBELN = W_VBAP-VBELN.
READ TABLE IT_VBKD INTO W_VBKD WITH KEY VBELN = W_VBAK-VBELN.
READ TABLE IT_KNA1 INTO W_KNA1 WITH KEY KUNNR = W_VBAK-KUNNR.
READ TABLE IT_TVLST INTO W_TVLST WITH KEY LIFSP = W_VBAK-LIFSK.
IT_FINAL-WERKS = W_VBAP-WERKS.
IT_FINAL-VBELN = W_VBAP-VBELN.
IT_FINAL-KUNNR = W_VBAK-KUNNR.
IT_FINAL-NAME1 = W_KNA1-NAME1.
IT_FINAL-VBELN1 = W_LIKP-VBELN.
IT_FINAL-ERDAT = W_LIKP-ERDAT.
IT_FINAL-LIFSK = W_VBAK-LIFSK.
IT_FINAL-ZZURWN = W_VBAP-ZZURWN.
IT_FINAL-IHREZ = W_VBKD-IHREZ.
IT_FINAL-ERDAT1 = W_VBAK-ERDAT.
IT_FINAL-NETWR = W_VBAP-NETWR.
IT_FINAL-BSTKD = W_VBKD-BSTKD.
IT_FINAL-BSTDK = W_VBKD-BSTDK.
IT_FINAL-POSNR = W_VBAP-POSNR.
IT_FINAL-VTEXT = W_TVLST-VTEXT.
IT_FINAL-KWMENG = W_VBAP-KWMENG.
CONCATENATE W_VBAP-VBELN W_VBAP-POSNR INTO IT_FINAL-SALORD SEPARATED BY '/'.
IF W_VBAP-CUOBJ NE '000000000000000000'.
REFRESH IT_CONFIG.
CALL FUNCTION 'VC_I_GET_CONFIGURATION'
EXPORTING
INSTANCE = W_VBAP-CUOBJ
LANGUAGE = SY-LANGU
TABLES
CONFIGURATION = IT_CONFIG
EXCEPTIONS
INSTANCE_NOT_FOUND = 1
INTERNAL_ERROR = 2
NO_CLASS_ALLOCATION = 3
INSTANCE_NOT_VALID = 4
OTHERS = 5.
IF SY-SUBRC = 0.
READ TABLE IT_CONFIG INTO W_CONFIG WITH KEY ATNAM = 'IN_PUMP_TYPE'.
IT_FINAL-PUMP_TYPE = W_CONFIG-ATWRT.
CLEAR W_CONFIG.
READ TABLE IT_CONFIG INTO W_CONFIG WITH KEY ATNAM = 'IN_PUMP_SIZE' .
IT_FINAL-PUMP_SIZE = W_CONFIG-ATWRT.
CLEAR W_CONFIG.
ENDIF.
ENDIF.
move w_vbap-vbeln to name_text.
CALL FUNCTION 'READ_TEXT'
EXPORTING
id = 'ZKT1'
language = 'E'
name = name_text
object = 'VBBK'
TABLES
lines = tline1
EXCEPTIONS
OTHERS = 8.
LOOP AT TLINE1.
CONCATENATE IT_FINAL-FOOTER TLINE1-TDLINE+0(65) INTO IT_FINAL-FOOTER.
CLEAR : TLINE1.
ENDLOOP.
clear : name_text,tline1[].
concatenate w_vbap-vbeln w_vbap-posnr into name_text.
CALL FUNCTION 'READ_TEXT'
EXPORTING
id = 'ZKT3'
language = 'E'
name = name_text
object = 'VBBP'
TABLES
lines = tline1
EXCEPTIONS
OTHERS = 8.
LOOP AT TLINE1.
CONCATENATE IT_FINAL-ITMTXT TLINE1-TDLINE+0(65) INTO IT_FINAL-ITMTXT.
CLEAR : TLINE1.
ENDLOOP.
APPEND IT_FINAL.
ENDIF.
CLEAR : IT_FINAL,W_VBAP,W_VBKD,W_VBUP,W_LIPS,W_LIKP,W_KNA1,W_VBAK,W_TVLST,name_text,tline1[].
ENDLOOP.
IT_FINAL1[] = IT_FINAL[].
SORT IT_FINAL1 BY KUNNR.
LOOP AT IT_FINAL1.
IF TMP NE IT_FINAL1-KUNNR.
IT_CUST-KUNNR = IT_FINAL1-KUNNR.
APPEND IT_CUST.
clear : tmp,it_cust.
TMP = IT_FINAL1-KUNNR.
ENDIF.
CLEAR : IT_FINAL1.
ENDLOOP.
ENDFORM. " FILL_FINAL
*& Form LAYOUT_DISPLAY
text
--> p1 text
<-- p2 text
FORM LAYOUT_DISPLAY .
W_LAYOUT-colwidth_optimize = 'X'.
ENDFORM. " LAYOUT_DISPLAY
*& Form GRID_DISPLAY
text
--> p1 text
<-- p2 text
FORM GRID_DISPLAY .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT = W_LAYOUT
IT_FIELDCAT = F_FIELD
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT = T_SORT
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
I_HTML_HEIGHT_TOP =
I_HTML_HEIGHT_END =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = IT_FINAL
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " GRID_DISPLAY
*& Form SORT_FIELD
text
--> p1 text
<-- p2 text
FORM SORT_FIELD .
w_sort-spos = 1.
w_sort-fieldname = 'KUNNR'.
w_sort-up = 'X'.
append w_sort to t_sort.
clear w_sort.
w_sort-spos = 2.
w_sort-fieldname = 'VBELN'.
w_sort-up = 'X'.
append w_sort to t_sort.
clear w_sort.
ENDFORM. " SORT_FIELD
*& Form TOP_OF_PAGE
text
FORM top_of_page.
IF R2 = 'X'.
REFRESH l_header.
w_header-typ = 'S'.
w_header-key = 'Delivery Block : '.
w_header-info = 'Outbound delivery created but not despatched'.
APPEND w_header TO l_header.
CLEAR w_header.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = l_header.
ENDIF.
ENDFORM. "TOP_OF_PAGE
*& Form BUILD_XLS_DATA_TABLE
Build data table for .xls document
FORM build_xls_data_table using custcode.
CONSTANTS: con_cret TYPE X VALUE '0D', "OK for non Unicode
con_tab TYPE x VALUE '09'. "OK for non Unicode
data : it_custcode like vbak-kunnr.
*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
*class cl_abap_char_utilities definition load.
constants:
con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
con_cret type c value cl_abap_char_utilities=>CR_LF.
clear : it_attach,it_attach[].
CONCATENATE 'Customer PONO' 'Customer PODT' 'Sales Order No' 'Item No'
'Pump Type' 'Pump Size' 'Order Value Rs' 'Delivery No.' 'Delivery Dt.'
'Quantity' 'Reasons for not getting Despatch'
INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
it_custcode = custcode.
CLEAR : W_KNA1,W_ADR6. "Code need to be added once testing is over.
READ TABLE IT_KNA1 INTO W_KNA1 WITH KEY KUNNR = IT_CUSTCODE.
READ TABLE IT_ADR6 INTO W_ADR6 WITH KEY ADDRNUMBER = W_KNA1-ADRNR.
P_EMAIL = W_ADR6-SMTP_ADDR.
LOOP AT it_final where kunnr = it_custcode.
CONCATENATE
IT_FINAL-BSTKD
IT_FINAL-BSTDK
IT_FINAL-VBELN
IT_FINAL-POSNR
IT_FINAL-PUMP_TYPE
IT_FINAL-PUMP_SIZE
IT_FINAL-NETWR
IT_FINAL-VBELN1
IT_FINAL-ERDAT
IT_FINAL-KWMENG
IT_FINAL-VTEXT
INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
clear it_final.
ENDLOOP.
if R1 = 'X'.
Populate message body text
perform populate_email_message_body.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
tables it_message
it_attach
using p_email
'AWAITING DESPATCH CLEARANCE'
'XLS'
'Delivery_Block'
'Delivery_Blk'
'[email protected]'
'INT'
changing gd_error
gd_reciever.
endif.
ENDFORM. " BUILD_XLS_DATA_TABLE
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
Send email
FORM send_file_as_email_attachment tables pit_message
pit_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
DATA: objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR : w_doc_data,w_cnt.
DESCRIBE TABLE it_attach LINES w_cnt.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = pit_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
object_header = objhead
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
Instructs mail send program for SAPCONNECT to send email.
FORM initiate_mail_execute_program.
WAIT UP TO 2 SECONDS.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
ENDFORM. " INITIATE_MAIL_EXECUTE_PROGRAM
*& Form POPULATE_EMAIL_MESSAGE_BODY
Populate message body text
form populate_email_message_body.
REFRESH it_message.
it_message = 'We have manufactured the pump/s against your purchase order and regret to inform'.
APPEND it_message.
it_message = 'you that same cannot be despatched for the reason/s indicated below.'.
APPEND it_message.
it_message = ' '.
APPEND it_message.
it_message = 'Please find the below attachment "Delivery_Blk.xls" for the details.'.
APPEND it_message.
it_message = ' '.
APPEND it_message.
it_message = 'We now request you to send the required detail/s by return mail/post to enable us '.
APPEND it_message.
it_message = 'to despatch the pump/s at the earliest.'.
APPEND it_message.
it_message = ' '.
APPEND it_message.
it_message = ' '.
APPEND it_message.
it_message = 'Best Regards'.
APPEND it_message.
it_message = 'O.E. ENGINEER'.
APPEND it_message.
endform. " POPULATE_EMAIL_MESSAGE_BODYHi,
Refer to the following piece of code. This is the simple code to send email with content and attachment.
Declaration
DATA: lwa_hd_change TYPE sood1,
lt_objcont TYPE STANDARD TABLE OF soli,
lwa_objcont TYPE soli,
lt_receivers TYPE STANDARD TABLE OF soos1,
lwa_receivers TYPE soos1 ,
lt_att_cont TYPE STANDARD TABLE OF soli,
lwa_att_cont TYPE soli,
lt_packing TYPE STANDARD TABLE OF soxpl,
lwa_packing TYPE soxpl,
lf_sent TYPE sonv-flag,
lf_size TYPE i.
CONSTANTS: lc_obj(11) TYPE c VALUE 'BOMSouthco',
lc_desc(20) TYPE c VALUE 'BOM Download',
lc_lang(1) TYPE c VALUE 'E',
lc_raw(3) TYPE c VALUE 'RAW',
lc_net(1) TYPE c VALUE 'U',
lc_mail(4) TYPE c VALUE 'MAIL',
lc_xls(3) TYPE c VALUE 'XLS',
lc_ext(3) TYPE c VALUE 'EXT'.
Passing values to the strutures used in SO_OBJECT_SEND function module
lwa_hd_change-objla = lc_lang.
lwa_hd_change-objnam = lc_obj.
lwa_hd_change-objdes = lc_desc.
lwa_hd_change-objlen = 255.
lwa_objcont-line = text-t29.
APPEND lwa_objcont TO lt_objcont.
CLEAR lwa_objcont.
lwa_receivers-recextnam = text-t31.
lwa_receivers-recesc = lc_net.
lwa_receivers-sndart = lc_mail.
lwa_receivers-sndex = 'X'.
lwa_receivers-sndpri = 1.
lwa_receivers-mailstatus = 'E'.
APPEND lwa_receivers TO lt_receivers.
CLEAR lwa_receivers.
lwa_receivers-recextnam = text-t30.
lwa_receivers-recesc = lc_net.
lwa_receivers-sndart = lc_mail.
lwa_receivers-sndex = 'X'.
lwa_receivers-sndpri = 1.
lwa_receivers-mailstatus = 'E'.
APPEND lwa_receivers TO lt_receivers.
CLEAR lwa_receivers.
Passing values for the attachment file
LOOP AT gt_output INTO gwa_output.
CONCATENATE gf_lf gwa_output-matnr gf_etb gwa_output-idnrk gf_etb
gwa_output-type gf_etb gwa_output-menge gf_etb
gwa_output-meins gf_etb gwa_output-comp gf_etb
INTO lwa_att_cont-line.
APPEND lwa_att_cont TO lt_att_cont.
CLEAR lwa_att_cont.
ENDLOOP.
CHECK lt_att_cont IS NOT INITIAL.
DESCRIBE TABLE lt_att_cont LINES lf_size.
lwa_packing-transf_bin = ' '.
lwa_packing-head_start = 1.
lwa_packing-head_num = 0.
lwa_packing-body_start = 1.
lwa_packing-body_num = lf_size.
lwa_packing-file_ext = lc_xls.
lwa_packing-objlen = lf_size * 255.
lwa_packing-objtp = lc_ext.
lwa_packing-objdes = lc_desc.
lwa_packing-objnam = lc_obj.
APPEND lwa_packing TO lt_packing.
CLEAR lwa_packing.
CHECK gf_error IS NOT INITIAL. "Check if unix file is written
FM to send email to the intended recipients
CALL FUNCTION 'SO_OBJECT_SEND'
EXPORTING
object_hd_change = lwa_hd_change
object_type = lc_raw
IMPORTING
sent_to_all = lf_sent
TABLES
objcont = lt_objcont
receivers = lt_receivers
packing_list = lt_packing
att_cont = lt_att_cont
EXCEPTIONS
active_user_not_exist = 1
communication_failure = 2
component_not_available = 3
folder_not_exist = 4
folder_no_authorization = 5
forwarder_not_exist = 6
note_not_exist = 7
object_not_exist = 8
object_not_sent = 9
object_no_authorization = 10
object_type_not_exist = 11
operation_no_authorization = 12
owner_not_exist = 13
parameter_error = 14
substitute_not_active = 15
substitute_not_defined = 16
system_failure = 17
too_much_receivers = 18
user_not_exist = 19
originator_not_exist = 20
x_error = 21
OTHERS = 22.
IF sy-subrc = 0.
MESSAGE s004 WITH text-t34.
ENDIF.
COMMIT WORK.
Reward if helpful.
Regards,
Ramya -
Error while sending emails from SOA 11G BPEL
Hi All,
I have configured an error email in my catch/catch-all blocks. Incase I dont have any retry action in my faultpolicies.xml file, the error email is sent fine. However if any remote/binding fault occurs and retry is done on partnerlink, in those cases the Error Notification service fails with below error:
ORABPEL-31015
Error while sending notification.
Error while sending notification to email.
Possible causes : SDPMessaging Driver not configured; Invalid To Address is used; Email server/Messaging gateway is down; using IP address as part of email ID instead of domain name;.
Caused by: javax.naming.NameNotFoundException: While trying to look up comp/env/ejb/services/NotificationServiceBean in /app/ejb/ejb_ob_engine_wls.jar#BPELActivityManagerBean.; remaining name 'comp/env/ejb/services/NotificationServiceBean'
sendEmailNotification WSIF Exception occured. Please check stack trace "Cannot get Object part 'Responses'. No parts are set on the message"
If I throw a remote/binding fault (throw activity), the error email gets sent. However whenever the retry happens incase of a fault, the above error comes.
Any idea what can be reason behing this...
Regards
Subhankartry to call a sub process from your catch all block and use the email activity in that subprocess. this should work
-
Error while sending email from MOSS portal
Hi,
I have configured email settings on my MOSS central admin, still MOSS throws error while trying to send emails to AD users. I tried to give permission for a user in a site and it threw this error:
The user or users have been added successfully, but there was an error in sending the e-mail message. The server may not be set up correctly to send e-mail. To verify that e-mail is configured correctly, contact your server administrator. at Microsoft.SharePoint.ApplicationPages.AclInv.SendEmailInvitation(PeopleEditor picker, String subject, String message)
at Microsoft.SharePoint.ApplicationPages.AclInv.BtnOK_Click(Object sender, EventArgs e)
at System.Web.UI.WebControls.Button.OnClick(EventArgs e)
at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)
at System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument)
at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)
at System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
I have provided outbound smtp server address and the email addresses as well.
Regards,
ManojOk, issue solved!! The issue was that I had to set anonymous connection directly to server. Error provided by SharePoint didn't help at all. After hours of hair-pulling and head-banging, I found a nice article that detailed how to troubleshoot e-mail issues:
http://www.tonytestasworld.com/post/2009/04/09/SharePoint-2007-Outgoing-E-mail-Troubleshooting-Tips.aspx
In the above article, the troubleshooting step 5 was the breaking point. As suggested in the blog:
http://www.sharepointblogs.com/johnwpowell/archive/2007/07/10/alerts-failing-cannot-connect-to-smtp-host.aspx
I created a C# console application and it gave me the correct error:
The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.7.1 Client was not authenticated
So I used this code to create an SMTP test application:
using System;
using System.Collections.Generic;
using System.Text;
using System.Net.Mail;
public class Program
public static void Main(string[] args)
try
// Check arguments
if (args.Length != 3)
ShowUsage();
return;
// Create message
MailMessage mmMessage = new MailMessage();
mmMessage.To.Add(new MailAddress(args[2] as string));
mmMessage.From = new MailAddress(args[1] as string);
mmMessage.Subject = "TestMail";
mmMessage.Body = "This is a test";
// Send message
SmtpClient sc = new SmtpClient(args[0] as string);
sc.Send(mmMessage);
catch (Exception ex)
Console.WriteLine(ex);
finally
//Pause
Console.WriteLine();
Console.Write("Press a key >");
Console.ReadKey();
private static void ShowUsage()
Console.WriteLine("Usage");
Console.WriteLine("TestMail [SmtpServer] [FromAddress] [ToAddress]");
} // end Program
This command saved lots of trouble for me and solved the email issue:
http://forums.msexchange.org/m_1800412705/mpage_1/key_/tm.htm
set-ReceiveConnector "default sfzcombx" -permissiongroups:"ExchangeUsers,ExchangeServers,ExchangeLegacyServers,AnonymousUsers"
Hope this helps somebody!
Regards,
Manoj
Maybe you are looking for
-
I am running Windows 7 Professional. When I try to install Flashplayer, I get to step 3, and then the installaion will not proceed any further. A blank dialog box appears, with Adobe Flash Player Installer in the upper left corner. I have tried to
-
Can you have a different theme for different pages?
I'd like to combine themes in my book I'm creating but I'm not able to lock the individual page themes so that I don't have to have each page be the same theme. Any way around this?
-
Auto create thumbnail from pdf
Hi all, can anyone assist with writing a script to automatically create thumbnails of a saved PDF and then move that thumbnail onto a NAS SMB shared volume? thanks KL
-
hi, when i try to run script in a file i got an error. i tried following command. @D:\Database Architecture\Scripts\test.sql It throw error as D:\Database.sql file not found. I'm facing this problem when i use Edit command and SQLPlus utility. how to
-
I there a way to take the bad words OUT of a song?
For example i want to get the boulevard of broken dreams by green day BUT my parents dont allow bad words is there a way?