Port Triggering not working on new router

I just received Fios ActionTec rev I router and Port Triggering won't work. On my old router I could change the firewall to highest level and I was able to create port triggering to open ports so I can use Outlook to connect to Gamil accounts but on this new router, only port forwarding works (SSH server in my local network port 22) but port triggering (opening port 993) to connect to Gamil won't work. Can anyone help?
Solved!
Go to Solution.

Is the attached procedure what you followed? Sorry for the awful formatting. It is on page 106 of the manual for the REV I
If a forum member gives an answer you like, please give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem. Thanks !!!
http://forums.verizon.com/t5/Verizon-net-Email/Fix-for-Missing-Inbox-sent-folders-etc-with-Internet-Explorer-11/m-p/647399
Attachments:
Document.txt ‏2 KB

Similar Messages

Port Forwarding not working between Fios Router and Netgear R6200 AT ALL

For the past two days I've been trying to forward port 80 and port 9000 from my Fios Router to my new NetGear R6200 Router and absolutely nothing is working. I need these ports open and forwarded as I need to forward them to my surveillance system from my R6200. The problem is that port forwarding is not working AT ALL. I've literally tried EVERYTHING. I turned my firewall off completely, enabled DMZ, changed my R6200 to a static IP, turned off uPnP on both sides, and reset my router to factory settings. I'm all out of patience and ideas. This is exactly why I went out and bought the R6200 in the first place, Verizon's Routers are atrocious.
Hardware:
First Router (Gateway): Verizon Fios Aciontec MI424WR
Second Router: NetGear R6200 Dual Band 802.11AC Router
Surveillance System DVR: Zmodo H9114 DVR
OS: Windows 8 Pro 64-Bit
At this point I'm willing to try anything. Fios customer support knew absolutely nothing and wasted my time and if a tech is sent to my house I'm sure the same exact outcome will occur. I recall someone saying that cloning the MAC of a different REV. worked for them but I don't recall the details. Any help would be greatly appreciated.

#1 As addressed in http://www.dslreports.com/faq/12506
The DHCP Server in the secondary router should be off.
#2 You only forward from the main router directly to the computer that you want to host on.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Port Forwarding not working on new Home Hub 4

Hi all,
I'm trying to get port forwarding going on a new Home Hub 4, specifically so I can access my Netgear Stora through its web interface on my LAN.
I've set the rules in port forwarding for the following ports:
Port 80 is HTTP Server
Port 443 is HTTPS Server
Port 21 is FTP Server
Port 22 is SSH Server
All these are now open and connect to Stora, which has an address supplied by DHCP.
However, when I check with various online port checkers, none of the ports are open and checking the trouble shooting logs of the BT Home Hub shows that the connection is being rejected. This is a sample of the message that is shown:
IN: ACCEPT [57] Connection closed (Port Forwarding: TCP 192.168.1.69:22 <-->86.141.184.236:22 [184.72.89.72:42894] CLOSED/TIME_WAIT ppp1 NAPT)
What can I do to make port forwarding work? I can't change the IP address of the Stora as I need to get into it via its web interface to do that.
I can navigate directly through Explorer to the files on the Netgear Stora NAS but not through the web interface.
Can anyone help?
Thanks.

i think by applying a static DNS i got it working, not 100% sure yet. edit: yep that worked, everyone can connect once again.
Message Edited by briantoxicity on 01-01-2008 04:59 PM

Printer not working with new router

I have a new router and my laptop with Windows XP is working Ok
My printer Deskjet 3520 network test result shows successful setup But it does not print when laptop requests
What can I do

Hi @Jobrig,
Welcome to the HP Forums!
I see that your HP Deskjet 3520 is not working with your new router, and I am happy to help with this connection issue!
For further assistance, I will need to know: if you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos, and if the printer is able to make copies.
In the meantime, please see the following:
This printing guide, Print Jobs are Stuck in the Print Queue.
This website, HP Wireless Printing Center, may also help.
Hope these guides will help you, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Hp Photosmart not working with new router

My Hp Photosmart D110a will not work wirelessly with my new Netgear N600 router. This is the second new router I have tried. With the first one Belkin I could at least get it to print from my PCs. But never with my IPad. Now the printer will not print from anything. I have reset it, entered new passwords etc. spent hours on the phone with tech support. What to do now?

@Ann99, welcome to the forums
I understand your Photosmart D110a model is not working with your new router. I will gladly do my best to help you.
I have some questions and some things for you to try.
1. Is the printer connecting to the wireless network successfully when you run the wireless setup wizard from the printers front panel or is the printer not found when you are running the installation from your PC?
2. What did tech support determine the issue was when you called them?
3. Here are some guides for you to try, these 2 guides relate to the questions I had asked in the first question:
Unable to Connect to a Wireless Network When Using WEP Encryption and Shared Key Authentication
The Printer Is Not Found During a Wireless Network Installation
4. What Operating System are you running on your computer?
5. Where are you running the installation from (disk, download or HP Printer Install Wizard for Windows for Windows)?
Please let me know all of the information and results from your troubleshooting above!
Have a terrific day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Macbook - Scanner not working following new router

Hi all,
I'm not sure if this is the right place, after 2 days I think I need some help.
I've had my Macbook Pro since October and 2 days got a new Netgear Router from Orange to start using 801.11n on the Wifi. I connected through Wifi OK, but couldn't get my HP4580 printer wifi enabled, it was picking up my old router. I gave up after 5 hours, the next day I turned my Macbook up and it picked up the router BUt then I lost Wifi for the internet. Anyway, a day later I have now managed to get my wifi working for internet and my printer, which I was dead please about. However, my scanner has now stopped working - it was working fine yesterday, when I has internet but no wifi to the printer. But today, it keeps saying scanner warming up. I even managed to get the scanned image up in teh window but it won't scanner so the connection looks like it is working (I have to scan with my USB, that's in OK). When I start HP Scan it says there's a problem and it just hands forever.
Any ideas?

Hi,
I may still "remember" the old IP address. Please use the following instructions to fix:
http://www.hp.com/global/au/en/wireless/reconfiguring-system-help3.html
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

RV215W router port forwarding not working

RV215W router port forwarding not working.
Port forwarding works for a short period of time, then stops working. Reboot router, works again for short period of time, then stops again.
I have updated firmware to latest. I had seen other similar bugs posted for 220 and I think 180, not sure if this router has similar bugs and waiting for fix release to firmware.
I had recently purchased two, one deployed, will hold off on other now because of issues, and may have to move to different unit if a resolution not found this week.
Dave Gritten
IT Director
Maritime Beauty
3695 Barrington St
Halifax NS B3K 2Y3
cell 902.223.9685
phone 902.429.8510 ext231
fax 902.422.7983
[email protected]
www.MaritimeBeauty.com

It's not just single port forwarding that has bugs, the entire router has bugs and simply does not work as advertised. I have found the following bugs/aspects of this router that just does not work correctly: 1. If you have to open ports, and who doesn’t, this router will eventually stop accepting packets from WAN>LAN. You will still have Internet access but no open ports. A reboot will fix this problem. Oh, by the way, this router has no scheduled reboot option! <--That would be a workaround but a welcome one for this router. 2. Firewall Access rules do not work!! Yep, a Cisco router and basic functionality simply does not work. I called Cisco and even though the tech saw the router not working denied it was a bug! Said we have to do port mirroring, setup a workstation with WireShark and capture packets so we can debug the issues. That would take several hours. I told him I would have appreciated if Cisco would have debugged the issues with their router BEFORE they shipped the units. Stay away from Cisco Small Business Routers. I wish I had. And if there are any Cisco die-hards out there willing to prove me wrong, just reply to this and please, prove me wrong that the RV series and specifically the RV215W is not JUNK.

After installation, the mobo LAN port is not working? urgent, help ple

I just installed archlinux on my new i7 860 Asus p7p55d-e Deluxe build, but after the installation the LAN port is not working anymore. Before this, this Lan port works perfect in windows as well as in the arch installation. But after the installation, the led is orange and is blinking slowly, windows complains that the cable is not properly plugged, and even arch installation can't pull DHCP from it also.
Luckily, the mobo has another lan port, so I have to plug the cable out and to the second port, but I couldn't seem to be able to find anyway to enable the first Lan port anymore?
Have you seen anything like this, what possibly is the reason?
Thanks, any help will be appreciated.

heleos, thanks for the reply, the first thing I check is BIOS. There is definitely nothing wrong with that, since I loaded the default one.
It is really strange, it seems no matter what I do, the 1st port which used to work, simple doesn't work, but the second one works fine.
But after some poking around with the "ethtool", it starts to work again. I have no idea what cause the disfunction and what magically heal it again.
Now I am really curious.
Last edited by mark.altern (2010-04-18 09:52:09)

IMac firewire port is not working

iMac firewire port is not working
Hi everybody, Happy New Year.
I am a 72 years old semi-newbie in video editing, because Iedit only 1 or may be 2 movies a year since 2007 and I have only very little computer knowledge.
I received a new 27” iMac as a birthday gift 14 months ago. About 10 months ago, with help, I successfully use the Migration Assistant to transfer some datas from my old power G4 to the iMac including two Final Cut Express projects. I had one project successfully done; burned to DVD and I save it with Print To Video. Last week, I have my second project done, I burned the sequences into DVD but unable to do a Print To Videodue to the iMac is not communicating with my Sony camcorders DCR VX1000, this is the same camcorder I used on the last job which was working a couple of months ago.As a result, I try to switch the Easy Setup with different Format and different Use; I refresh the Canvas window; I did a Mix down; move the Screen Saver to NEVER as well as the Energy Saver set to NEVER SLEEP. I also trashed the preferences (plist) folders; run the Utility repair, I replaced the firewire cable (4 pines – 9 pines 800), but nothing work. Up to this point, I think that there is no signal from the firewire port to the camcorder because I understand when the sequences is ready, the firewire is connected between the computer and the recording camcorder, the Print to Video is activated, then the word DV- IN should be seen on the recording deck screen. This time, I don’tread such words on the recording screen. Therefore, I think there’s no out going signal from the iMac to the recording camcorder and the iMac is not receiving signal from the recording camcorder. At this point, I try to connect my iMac to the power G4 to see if I can do some data transfer. Follow the procedures, I hook up the data transfer cable between the G4 and the iMac, I can the fireswire icon moving on the G4 screen but no indication on the iMac screen (there should be some indications in the source bar), this shows me the iMac did not recognize the G4 which worked on previous data transfer. It looks to me the firewire port on my iMac is dead. What has gone wrong? Could I accidentally disabled the firewire port by some magic keystroke? (i.e. accidentally fat finger some thing to make it stop working? Oh, by the way, during the playing around, went to the Final Cut tool bar, I click the View >Video Out > Digital Cinema Desktop Preview – Main, the result was a black screen and the esc key was my rescuer - LUCKY LUCKY! Are there any other trouble-shooting techniques to apply before bringing to shop? Please help!
Sorry for such a long statement, forgive me for unable to make it shorter. Thank you for your patience. Thanks to all the folks in this board for being so helpful.
p.s.

Not sounding good.
If the system Profiler does not see it then there is a basic communication problem between camera and the Mac.
I'm thinking the Firewire port is the culprit as some 800 ports were faulty.
I'd suggest taking the Mac, cable and camera to your nearest Authorized Apple Service Centre and get them to diagnose the issue. eg. let them try to connect the two devices.
Right (control)click the Sequence icon in the Browser and select Item Properties, do the same for a clip.
You can also post screen shots for the Properties.
Al

Time Capsule Internet WAN port is not working, what can I do to set it up?

When I plug the ethernet cable from my router to my Time Capsule it should turn on a green light in the back of the TC, but this light is not turning it on anymore, and this port is not working, how can I set it up?
I want to create a wireless network with the TC, but if this port (Ethernet WAN port) doesn't work, I can't, or can I? How?
Then I want to use my 2 Airport Express to use the network that I want to create.
I hope you can help me, thanks a lot.

what model is the TC? A1xxx from the base please.
How old and is the front LED otherwise showing it is operating OK?
What is the network setup..? Is the TC bridged or router.. or is it in Join wireless network mode now..
If the later.. the ethernet ports are turned off.. you need to do a factory reset of the TC.
Factory reset.. Hold in reset button.. THEN power on the TC.. keep holding in reset for about 10sec until the front LED flashes rapidly.. there is a good chance the ethernet will work now.

New USB not working in new macbook pro. What do I do?

I have just bought a brand new 16 GB USB stick for use with my 2 month old macbook pro. My mac is not recognising the presence of USB stick but I have checked and the USB works in the other family laptop which is a Toshiba. I have used other USB's with the mac so I know it is not just as simple as the ports are not working. Help!

For reasons unknown to me, your MBP does not like that USB device. I assume you have tried all available USB ports.
Ciao.

Time Capsule not working as a router

I've done a search, but can't find anything that jumps out to me as the same issue.
I've recently ditched all my PC gear. Now have the following:
Mac Mini
2TB Time Capsule
MacBook Air
iPad
My issue is with the internet connectivity of the Time Capsule. I have the mac mini connected via Ethernet. It can get on the internet no problem. None of my wifi devices can at all. My ISP only allows two devices to ping out, and they need to be registered via MAC address. No big deal, except my Time Capsule isn't functioning like a router. So, the MAC address of my Mac Mini is registered, and it's working, but I can't register the Time Capsule. I'm pretty sure I'm missing something easy, but can't for the life of me figure out what it is. Figured instead of banging my head against the wall, I'd see if anyone had something similar happen to them?

Register by MAC address to the first device is generally used by cable companies. But the Modem acts as the first port of call and whatever device first is turned on, picks up the public IP address and the MAC is registered. It just works.
Your issue might be that the first device to register has a very long lease. Since you cannot power cycle you should ask the IT admin of the building who controls this setup to release and renew the IP after you plug in the TC otherwise it will not be recognised.. for days or weeks or however long the lease is set to.
But it could be 24hours.
Plainly you got the Mac Mini working.. how did you do that??
Sometimes you can just try overnight.. remove the Mac and plug in the TC.. but it is far easier to talk to the admin and get him/her to simply renew the lease.
The other method we use is spoof the MAC address of the device currently plugged in. ie grab the MAC address of the Mini and use it in the router.. to pretend it is really the Mini.. the router on the other end is none the wiser.
TC AFAIK, has no ability to spoof, but almost every other broadband router made can do it. Apple designed it for lowest common denominator in terms of networking ability.. to put it mildly.
Note your internet might be already behind a NAT.. if you use the TC or any other router in NAT mode there is an issue of double NAT with every site that requires interactive connection because there is no possible link from the site to your PC by forwarding the port. Double NAT effectively blocks it.
Check the IP you have on the Mini now.. if it is a private address.. ensure it is not 10.0.x.x by the way otherwise the TC will not work due to routing considerations. But any of the private IP address ranges are not routable over the internet and will give you issues.
http://en.wikipedia.org/wiki/Private_network

Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed?

Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed? I am using Firefox Beta for android and I also tried just Firefox.

Please check the Play Store app for any Flash updates and install them if present.

Home sharing does not work with new mountain lion update.

home sharing does not work with new mountain lion update. Does anyone else have the same issue. Updated all computers in my home, deauthorized and reauthorized each computer. turn off home sharing and turned it back on. don't know what else to do..please help...

Our Apple TVs continue to lose connection ever since installing Mountain Lion on the host computer. The only thing that fixes them is to quit and relaunch iTunes, which only works unti the ATV goes to sleep. If a movie is paused for more than a few minutes and the ATV goes to sleep, pressing play again on the remote is greeted with "There are no movies on this computer" or "Turn on Home Sharing."
If we stop a video on one ATV and attempt to resume it in another room, the error begins again. The other ATV can't connect until iTunes is relaunched.
My guess is that it has something to do with the new [annoying] security settings. But I still haven't found a fix other than restarting iTunes everytime we want to watch something from our downloads. Fail.

USB ports does not work

Hi I have problems with not working USB ports. It used to work. I downloaded actual drivers at msi.com for my gaming notebook GX 60 Destroyer and now my USB ports does not work. What should I do?

What driver have you updated?
Try to do an EC firmware reset by removing the battery and the AC adapter then put the battery back with AC adapter attached.
Same questions like Pegasus asked, does all ports not working? which one exactly? What OS are you using?
Have you done any changes to the system? (for example: self-install OS or changing OS)

Port Triggering not working on new router

Similar Messages

Maybe you are looking for