Macbook - Scanner not working following new router

Hi all,
I'm not sure if this is the right place, after 2 days I think I need some help.
I've had my Macbook Pro since October and 2 days got a new Netgear Router from Orange to start using 801.11n on the Wifi. I connected through Wifi OK, but couldn't get my HP4580 printer wifi enabled, it was picking up my old router. I gave up after 5 hours, the next day I turned my Macbook up and it picked up the router BUt then I lost Wifi for the internet. Anyway, a day later I have now managed to get my wifi working for internet and my printer, which I was dead please about. However, my scanner has now stopped working - it was working fine yesterday, when I has internet but no wifi to the printer. But today, it keeps saying scanner warming up. I even managed to get the scanned image up in teh window but it won't scanner so the connection looks like it is working (I have to scan with my USB, that's in OK). When I start HP Scan it says there's a problem and it just hands forever.
Any ideas?

Hi,
I may still "remember" the old IP address. Please use the following instructions to fix:
   http://www.hp.com/global/au/en/wireless/reconfiguring-system-help3.html
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • Printer not working with new router

    I have a new router and my laptop with Windows XP is working Ok
    My printer Deskjet 3520 network test result shows successful setup But it does not print when laptop requests
    What can I do

    Hi @Jobrig,
    Welcome to the HP Forums!
    I see that your HP Deskjet 3520 is not working with your new router, and I am happy to help with this connection issue!
    For further assistance, I will need to know: if you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos, and if the printer is able to make copies.
    In the meantime, please see the following:
    This printing guide, Print Jobs are Stuck in the Print Queue.
    This website, HP Wireless Printing Center, may also help.
    Hope these guides will help you, and thank you for posting!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Hp Photosmart not working with new router

    My Hp Photosmart D110a will not work wirelessly with my new Netgear N600 router. This is the second new router I have tried. With the first one Belkin I could at least get it to print from my PCs. But never with my IPad. Now the printer will not print from anything. I have reset it, entered new passwords etc. spent hours on the phone with tech support. What to do now?

    @Ann99, welcome to the forums
    I understand your Photosmart D110a model is not working with your new router. I will gladly do my best to help you.
    I have some questions and some things for you to try.
    1. Is the printer connecting to the wireless network successfully when you run the wireless setup wizard from the printers front panel or is the printer not found when you are running the installation from your PC?
    2. What did tech support determine the issue was when you called them?
    3. Here are some guides for you to try, these 2 guides relate to the questions I had asked in the first question:
    Unable to Connect to a Wireless Network When Using WEP Encryption and Shared Key Authentication
    The Printer Is Not Found During a Wireless Network Installation
    4. What Operating System are you running on your computer?
    5. Where are you running the installation from (disk, download or HP Printer Install Wizard for Windows for Windows)?
    Please let me know all of the information and results from your troubleshooting above!
    Have a terrific day
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Port Triggering not working on new router

    I just received Fios ActionTec rev I router and Port Triggering won't work. On my old router I could change the firewall to highest level and I was able to create port triggering to open ports so I can use Outlook to connect to Gamil accounts but on this new router, only port forwarding works (SSH server in my local network port 22) but port triggering (opening port 993) to connect to Gamil won't work. Can anyone help?
    Solved!
    Go to Solution.

    Is the attached procedure what you followed? Sorry for the awful formatting. It is on page 106 of the manual for the REV I
    If a forum member gives an answer you like, please give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem. Thanks !!!
    http://forums.verizon.com/t5/Verizon-net-Email/Fix-for-Missing-Inbox-sent-folders-etc-with-Internet-Explorer-11/m-p/647399
    Attachments:
    Document.txt ‏2 KB

  • Scanner not working with new software?

    Recently I bought and updated my computer with Snow Leopard. But when I went to do my first scan after updating, HP Photosmart told me that it could not find my scanner. Before, I came here to find a way to connect my scanner to my mac and I received a download and installed it. What do I need to install now to make my scanner work with my computer?
    Oh, and the scanner I have is a HP Deskjet F300 Series

    bimms4 wrote:
    The only additional issue is that I am connected via wifi.
    Any suggestions please?
    I think that's your problem. I've got a wifi printer (Brother) that works great in every way - except scanning via wifi. In order for scanning to work it has to be connected via USB or ethernet for it to be recognised. Shame, needing a cable just for scanning purposes.
    I expect there are some wifi printers/scanners out there that work completely wirelessly but it doesn't include mine or the few HPs I've set up elsewhere.

  • LR 5 not working on new Macbook Pro.

    LR 5 not working on new Macbook Pro.  Have tried 2 CC downloads, 5.6 licensed download and 5.5 licensed download, all result in the same thing.  It comes up with basic screen but no panels and gives an error occurred when changing modules.  Nothing I've tried seems to help.  It also has says "get started with lightroom mobile at top left although it says it is Lr 5.6.  Anybody else having problems?  Calls to adobe result in no help and have to wait till Monday for some technical support.  Surely this should run on a NEW laptop with no other software installed!!!

    Install logs were fine.  Application installed but wouldn't run properly.  Finally got Adobe support and it turns out to be a file permissions error.  Had to add both applications and myself as accessors of Lightroom folder under path ~/Library/Adobe/  and set permissions to read & write (was read only for everything but system) and apply to all enclosed folders.   Runs fine now.  Including this here in case anyone else runs across this issue.

  • YOUTUBE NOT WORKING ON NEW MACBOOK PRO

    YOUTUBE NOT WORKING ON NEW MACBOOK PRO
    Every time I want to see videos from youtube the video player just says "your browser does not currently recognize any of the video formats available".
    Please help I have everything possible up to date.
    Thanks!

    It appears as if only some videos on YouTube will play using HTML5 and without Flash. For example, this video plays just fine for me and I do not have flash installed: http://www.youtube.com/watch?v=fxEWddT44BY
    So, unfortunately, you will have to install flash or wait for YouTube to fix their website.
    Also, one thing to try: When I had Flash installed and the "ClickToPlugin" Safari extension installed, YouTube would load all the movies in a simple HTML5 format. So no annotations or any other annoying stuff. Might be worth trying. You will have to install flash but, with the "ClickToPlugin" extension, you don't have to use Flash.

  • Why does the internet on my new macbook pro not work when my old macbook's does?

    Why does the internet on my new macbook pro not work when my old macbook's does? I'll have to turn the wifi off and back on multiple times to get the internet to continue to work on my Macbook Pro (running mountain lion but did it on lion also) when it runs fine on my old white Macbook (running lion). Is there something I can do to fix it or do I just have to deal with it?

    Here is your fix .. I have uploaded my properly calibrated profile get it here :
    http://www.megaupload.com/?d=YAJL6A9X
    And it should go to your user folder/Library/ColorSync/Profiles
    if you have one already you can rename either one ..
    and then go to system preferences - displays - color to select the profile .
    you will get rid of the blue tint while keeping correct color and gamma
    This is for the newer 2010 MBP's altho if same display was used might also give good results in the previous models as well . .

  • IMessage not working on new Macbook Pro.

    iMessage not working on new Macbook Pro. Issue began after I downloaded latest version of Mountain Lion.  After every message it says delivered then immediately a red circle with exclamation point says message not delivered.  Any ideas?

    I can also no longer text on my computer or iPad.  Fine on iPhone.  Same as you - I can see everything up until a specific day.  But I didn't do any kind of update where it should have stopped.  And it stopped working on my computer and iPad at the same time.

  • Backlight control not working on new 13" macbook air

    Backlight control not working on new 13" macbook air

    Contact Apple's Express Lane, and let them deal with it, since it's a new machine.

  • HP Laserjet 3052 Scanner not working

    So I upgraded to Leopard and everything seems fine except I cannot run the HP Scan software. The printer [art still works but I just cannot scan. I have tried reinstalling the software but it still not working. HP have no new software and drivers for it yet.
    Anyone any ideas?
    Thanks,

    I can confirm what everybody else in this thread has said and add one detail. I bought an HP 3055 all-in-one yesterday and after installing the software, not only wouldn't it scan ("waiting for PC..." forever) but it also wouldn't print, AND another HP printer elsewhere on my network STOPPED working.
    After an hour on the phone with HP support (10 minutes just to register my info), the guy confirmed that there is no 10.5 driver, didn't know when there would be one, and added the following amazing fact. Not only does the software on the CD that comes with the printer/scanner not work with 10.5, it actually BREAKS its printing from Leopard (and similarly the 10.4 or earlier downloadable drivers from hp.com). He claimed that printing from 10.5 works on the 3055 out of the box, but if you are so reckless as to install the software that actually came with the printer, it permanently stops working. (Plus, apparently, stops the printing of other HP devices.)
    He went on to say the only fix was to re-install the Mac OS . However, I can report that after un-installing every piece of HP software on my machine (using their uninstallers, not just deleting), then restarting, the printer now works, and so does the other HP printer on the network. (Scanning still doesn't work.)
    Btw, echoing other complaints on this thread, the reason I bought a new HP scanner was because my old one had stopped working ever since (I think) 10.4, and I finally gave up.

  • HP Printer F4180- Scanner not working

    I've installed Snow Leopard, but now its now letting me scan. It will print documents, but when I click 'scan' it says 'scanner not found'. I thought this update was supposed to make using my printer easier!!! Can anyone tell me how to sort this out? I depend on this scanner to create work and this is frustrating to say the least!
    Thanks,
    T SCOTT

    I can confirm what everybody else in this thread has said and add one detail. I bought an HP 3055 all-in-one yesterday and after installing the software, not only wouldn't it scan ("waiting for PC..." forever) but it also wouldn't print, AND another HP printer elsewhere on my network STOPPED working.
    After an hour on the phone with HP support (10 minutes just to register my info), the guy confirmed that there is no 10.5 driver, didn't know when there would be one, and added the following amazing fact. Not only does the software on the CD that comes with the printer/scanner not work with 10.5, it actually BREAKS its printing from Leopard (and similarly the 10.4 or earlier downloadable drivers from hp.com). He claimed that printing from 10.5 works on the 3055 out of the box, but if you are so reckless as to install the software that actually came with the printer, it permanently stops working. (Plus, apparently, stops the printing of other HP devices.)
    He went on to say the only fix was to re-install the Mac OS . However, I can report that after un-installing every piece of HP software on my machine (using their uninstallers, not just deleting), then restarting, the printer now works, and so does the other HP printer on the network. (Scanning still doesn't work.)
    Btw, echoing other complaints on this thread, the reason I bought a new HP scanner was because my old one had stopped working ever since (I think) 10.4, and I finally gave up.

  • Time Capsule not working as a router

    I've done a search, but can't find anything that jumps out to me as the same issue.
    I've recently ditched all my PC gear.  Now have the following:
    Mac Mini
    2TB Time Capsule
    MacBook Air
    iPad
    My issue is with the internet connectivity of the Time Capsule.  I have the mac mini connected via Ethernet.  It can get on the internet no problem.  None of my wifi devices can at all.  My ISP only allows two devices to ping out, and they need to be registered via MAC address.  No big deal, except my Time Capsule isn't functioning like a router.  So, the MAC address of my Mac Mini is registered, and it's working, but I can't register the Time Capsule.  I'm pretty sure I'm missing something easy, but can't for the life of me figure out what it is.  Figured instead of banging my head against the wall, I'd see if anyone had something similar happen to them?

    Register by MAC address to the first device is generally used by cable companies. But the Modem acts as the first port of call and whatever device first is turned on, picks up the public IP address and the MAC is registered. It just works. 
    Your issue might be that the first device to register has a very long lease. Since you cannot power cycle you should ask the IT admin of the building who controls this setup to release and renew the IP after you plug in the TC otherwise it will not be recognised.. for days or weeks or however long the lease is set to.
    But it could be 24hours.
    Plainly you got the Mac Mini working.. how did you do that??
    Sometimes you can just try overnight.. remove the Mac and plug in the TC.. but it is far easier to talk to the admin and get him/her to simply renew the lease.
    The other method we use is spoof the MAC address of the device currently plugged in. ie grab the MAC address of the Mini and use it in the router.. to pretend it is really the Mini.. the router on the other end is none the wiser.
    TC AFAIK, has no ability to spoof, but almost every other broadband router made can do it. Apple designed it for lowest common denominator in terms of networking ability.. to put it mildly.
    Note your internet might be already behind a NAT.. if you use the TC or any other router in NAT mode there is an issue of double NAT with every site that requires interactive connection because there is no possible link from the site to your PC by forwarding the port. Double NAT effectively blocks it.
    Check the IP you have on the Mini now.. if it is a private address.. ensure it is not 10.0.x.x by the way otherwise the TC will not work due to routing considerations. But any of the private IP address ranges are not routable over the internet and will give you issues.
    http://en.wikipedia.org/wiki/Private_network

  • Printer not working following iPad uodate

    Printer not working following iPad upgrade

    Hi,
    Is the printer not mechanically working or are you having a problem with printing wirelessly from your device? Was the upgrade to the ipad software or did you get a new ipad?
    Try restarting your apple device - It's a simple fix that sometimes helps re-establish the connection to the printer.
    Other things to check would be that there have been no recent changes to the wifi password.
    "Although I work for HP, I'm speaking for myself and not on behalf of HP"
    "Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • The icons in MacBook are not working

    Hi,
    The desktop icons in my MacBook are not working and this force me to use FILE --> New finder window to open the Safari etc... How do I make my icons work from desktop. Appreciate your help.  Thanks.
    Ananth

    Each version of Extension Manager only installs/manages extensions for the same suite of products. EM CS6 only installs extensions for DW CS6. To install extensions for DW CS5, you should launch EM CS5 to install it. Note that you have to update EM CS5 to 5.0.3 before you launch EM CS5 in Mac 10.8, otherwise EM CS5 will crash due to Mac API change. You can use Adobe Application Manager to update EM CS5 or download and run http://download.macromedia.com/pub/dw_exchange/extension_manager/mac/AdobeExtensionManager _5_0_3_mul_AdobeUpdate.dmg which can be found at http://www.adobe.com/downloads/updates/.

Maybe you are looking for