Portal not working after IP Address Change
Hi,
Because of some reasons, IP Address of the unix machine where portal was installed is changed and all of sudden portal is not working. On accessing the portal on new IP, we are getting "Service Unavailable, Cannot process request for dynamic resources". Can anyone please advice on this?
Regards,
Chandra
Hi,
Have you restarted the portal ?
This might be needed even if you are using hostnames in the config, since the JVM by default caches DNS lookups for ever. See Controlling DNS caching in the Java Virtual Machine (i.e. J2EE WAS) for more info
Similar Messages
-
PR Item Level Release WF not working after Release Strategy change
Hi Experts,
I did PR item Level Release Standard Work flow and it was working fine now due to client requirement we changed the release strategy and now when the PR workflow triggers it gives the Below mentioned error.
I really don't understand y after changing the release strategy workflow is not working and giving the following error.
Even if i restart the workflow in SWPR the same error is occuring.
Exception occurred - Error when starting work item 000000390118
PROCESS_NODE - Error when processing node '0000000003' (ParForEach index 000000)
CREATE - Error when creating a component of type 'Step'
CREATE_VIA_WFM - Agent determination for step '0000000003' failed
EVALUATE_AGENT_VIA_RULE - Error in resolution of rule 'AC00000148' for step '0000000003'
AC00000148 - Object type 'TS' not valid
Executing flow work item - Work item 000000390118: Object FLOWITEM method EXECUTE cannot be executed
Executing flow work item - Error when processing node '0000000003' (ParForEach index 000000)
Regards,
HariHello Hari,
please set a breakpoint at function module
ME_REL_GET_RESPONSIBLE
and see what happends in section
CASE t16fc-frgwf.
* keine Ermittlung
WHEN space.
RAISE nobody_found.
* Ermittlung über T16fW
WHEN '1'.
If using the T16FW-table, it should go to '1', otherwise it may that a user exit under '9' is used. So please check this.
Best wishes,
Florin -
CFHTTP with https not working after server IP change (CF 10, Windows Server 2008 R2)
Hi,
We noticed that a call to https://www.googleapis.com/ via CFHTTP stopped working after our sysadmin switched the IP of our web server.
The error from ColdFusion is:
JSON parsing failure at character 1:'C' in Connection Failure
After researching, I tried using the keytool ([CF 10 root]/jre/bin/keytool.exe to import the top-level certificate (GeoTrust Global CA), which was exported from Google Chrome 42 in DER format.
I used the following flags:
-import -v -alias GAGLOBAL -file [.cer location] -keystore cacerts -storepass [password]
It appeared to add correctly, as it displayed the owner, issuer, etc. and asked if I wanted to trust the certificate. I replied "yes", and it responded "Certificate added to keystore" [Storing cacerts]. I then restarted the CF 10 application service. The same error persists.
Please advise.
Thanks,
DaveHi,
According to your description, my understanding is that manually added statics route disappeared after rebooting.
Try to use command line:
Route –p add destination mask subnetmask
gateway metric costmetric if
interface
Note:
Interface indicates the interface number. Type route print, the first column of
interface list, find the interface number corresponding to the MAC address.
Routes added by using the -p option are stored in the registry under the following key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip \Parameters\PersistentRoutes
You may open registry edit and check to see if the registry entry is added.
Besides, you may try a work around way to add this route entry in hosts file, which are stored in the local systemroot\System32\Drivers\Etc
folder.
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Password not working after ID name change?
Hi, I changed my Apple ID to correspond with my new email address, and when I did the password for the account stopped working on my iPhone even though I only changed the account name, not the password. So I changed the password (they made me use an uppercase letter and eight characters, whereas before it was simply six lowercase letters - what's up with that?). The new password is still not working. Can someone tell me what I'm doing wrong?
go to settings>store>sign out and then sign back in with correct info. they made you change the password for your safety, they had everyone make their passwords like this now
-
Mail on iPod Touch not working after iCloud password change
A few days ago, I was prompted to change the mail password for my iCloud account. My iPad and MacBook mail were both successfully updated and then accessed. When I tried my iPod, it said the password was incorrect. I delted the account and added it again, but the account is still not accessble.
After some research, I think my iPod is a second-generation model. It was purchased two years ago this month, so I was disappointed to see that it cannot be updated to iSO 5. Because I cannot have this upgrade, I cannot get the iCloud option in Settings which would help me out. I suspect this is the root of my mail problem.
Is there any way to get my mail to work?Update: I just spent some time with an on-line chat. Turns out that when I switched to iCloud a few months ago, I missed an opportunity that started on May 1, 2012.
For those of you who have not yet made the switch to iCloud, the paragraph below might help. Please note that the Apple help said that I should use Firefox rather than Safari to access the site. Crazy! Why would an Apple Application not work.
What if I just want to keep using my email on all my devices?
As of May 1, you can choose to keep using your mail after MobileMe ends, even on devices that don’t meet the iCloud system requirements. Just go to me.com/move and select the option to keep using your email after MobileMe ends. Once you have completed this short process, your mail will continue to work on devices that don’t meet the iCloud requirements after MobileMe ends on June 30, 2012. -
Why does printer not work after network password changed?
I changed the password on my Airport Extreme (5th Gen) which is connected to an iMac,base, and now my HP Photosmart C4750 will not print. I have tried uninstalling/reinstalling the printer software using the original HP printer CD. The error message "The selected WI-Fi Network "network name" is not within the reach of the device." Do I have to change the password back in order for it to work on my wireless?
Appreciate any assistance.Hi,
The software provided for Mountain Lion does not offer any wireless configuration, therefore it may not work well on the OS.
Connect the printer to the network through the EWS by following the steps below:
Step one: Restore the printer's network default settings
Touch the ATM button () next to Wireless / Scan .
Touch the ATM button () next to Wireless Menu
Touch the ATM button () next to Wireless Settings .
Use the up and down ATM buttons () to select Restore Network Defaults , and then press OK .
Touch the ATM button () next to Yes to confirm your selection.
Step two: create a temporary network connection with the printer to access its EWS
Click the Wi-Fi icon on your Mac.
Click on Join Other Networks.
Click on Show Networks.
Select the HPSETUP network and click on Connect
Allow 2-3 minutes to establish the connection.
Step three: Follow the Wireless Setup Wizard from teh EWS
Open Safari and click the Bookmarks icon, select Bonjour from that window
Note: if the Bonjour option is missing under the Bookmarks menu click on Safari > Preferences > Bookmarks and check the Bonjour box within the Collections section.
From Bonjour double click the C4750. the EWS appears.
Open the Networking tab.
Click on Wireless.
Click the Start Wizard button on the bottom right side of that screen and follow the steps to connect the printer to your network.
Once you are done, reconnect your Mac to your home network by following step two but selectng your home network.
Shlomi -
Analyze link generated by Portal not working after SSL Configuration
Hi,
We've installed OracleAS Portal 10.1.4 and Oracle Discoverer Version 10.1.2.48.18 on the same machine. We recently configured SSL on OracleAS Portal for SSO server only. Discoverer was not SSO enabled.
Now after successful SSL configuration we are facing one problem. The Analyze link that is generated by Portal to analyze the worksheet in Single Worksheet Viewer is no longer working. when we click on the analyze link we get the "HTTP 500 Internal Server Error" and a message that Page cannot be displayed.
Please advise...Hi Andrew
It sounds like you need to enable SSO for Discoverer too.
Best wishes
Michael -
Oracle Portal not working after upgrading from 1.0.2 to 1.0.2.1
Hi All,
Previously I had
9iAS : 1.0.2.0.0
Portal: 3.0.7.6.2
OS: Win NT
and I upgraded to
9iAS: 1.0.2.1.0
Portal: 3.0.8 (using scripts)
Now the scenario is
I can access: Apache, Servlet(IsItWorking) and JSP samples. But now I can't access Oracle portal (ie http://host:port/pls/portal30/). Even Login Server is coming properly (ie http://host:port/pls/portal30_sso/)
There was no errors during upgrade scripts. Also I check the portal30 schema for invalid objects. But there were no invalid objects in that schema.
According to me, all the modules of apache are working only except mod plsql and so i can not access Portal. It gives misconfiguration error from apache. So what can be the problem??
Any ideas in this.
Thanks in advance.There was an issue reported on this upgrade having to do with multiple entries in the Apache configuration files. Check your .conf files for duplicate entries.
-
Dbconsole does not work after windows domain change
I have change windows domain of a oracle 10g server when it was already installed. After that, I can not install dbconsole in a new instance. The service starts but the login screen does not appear.
Does anyone have any idea ?Have you tried to start directly with the emctl command directly on the command line?
What's the error message displayed.
When you change your domain the asociated configuration file is not matched, and emctl is unable to find it.
You should try to locate a directory named like this: FullyQualifiedHostName_InstanceName
Once you have changed the domain, oracle is unable to find a configuration with the domain previously stated. You'll have to reconfigure and may be recreate your repository.
Commands follow:
set oracle_sid=YourInstanceName
emctl stop dbconsole
emca -repos recreate
emca -deconfig dbcontrol db
emca -config dbcontrol db -
Hp5510 black ink still not working after two cartridge changes and hard reset
Can you help?
Our 5510 does not print the black ink, we have tried hard reset, two new genuine black printer cartridges and it still refuses to play ball. All other colours print ok.
Thanks steveHello @Bigeady860,
Welcome to the HP Support Forums! I see you are running into some print quality issues on your HP Photosmart 5510, you are unable to print in black ink.
I would like you to continue here: Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages, I understand you may have done some of these steps already but I need you to complete all steps in order to resolve the missing black issue you are experiencing.
Please note: There are three printhead cleaning stages. Complete all three stages if necessary. If the printhead is badly clogged, it might require another cleaning cycle. If so, wait 30 minutes after the last (third) cleaning stage to start the first stage of the cleaning process over again.
If you are still unable to print in black ink, I suspect the issue may be the printer and not the cartridge. Please let me know which Country/Region you are in as well as the product Warranty status: HP Warranty Checker
I hope to hear from you soon.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping! -
E1200 Not Working after Verizon Modem Change
I have a new Linksys E2100 that was working well with an old Verizon modem. Then recently that modem gave up the ghost and I was issued another one (Westel Model 6100G). I have no problems with internet connectivity when connecting directly from my harddrive to the Verizon modem. I am also not having trouble connecting to the Linksys routher as I am able to see my wireless connection with no problem. However, when I try to set up the connnection with the E2100 in the loop (yes, it's connected correctly) I no longer have internet access.
I tried de-installing and re-installing the Linksys software (thinking maybe there was some new configuration that would be auto-detected with a new set-up), but this didn't help. I suspect that if the problem is with my Linksys router and not with my Verizon modem that there might be something that could be done to reconfigure something manually but I do not know enough about connections and wireless systems to trust myself not to mess something up.
At this point I'm assuming it's a Linksys issue since I know that my Verizon modem can connect me to the internet, so works properly. Is there some known incompatibility with this Linksys model and the Westell 6100G modem? Any advice how to proceed from here?Let me me check if i got this one right, when your computer is connected to yor router wirelessly then you were able to get online but when your computer was hardwired to the router then you were not able to get online. Can you check the ip address that you will get when your computer was wirelessly connected and hardwired to the router.
-
WebAccess Admin Portal not working after upgrade to GW 2014
GroupWise was upgraded from2012 to 2014 on a Windows 2008 R2 Enterprise SP1 64 bit. GroupWise WebAccess is working fine but when I try to get to the WebAccess Admin console, http://server IP/gw/webacc?action=Admin.Open, I received the following error message after I put in my login information (yes, it does bring me to the login screen).
Error message: Unable to connect to the GroupWise Admin Console @https://127.0.0.1:9710/gwadmin-service/system/whoami
It was functioning before the upgrade. On the GroupWise server, if I go to http://127.0.0.1 it does take me to the Welcome screen and if I go to http://127.0.0.1/gw/webacc I can successfully log into my GroupWise WebAccess account.
Why can't I Access the WebAccess Admin Console?
Thanks,
Kim AkeyI believe you must use admin user you defined for the new Gw2014 administration web console for login.
Lep pozdrav / Regards
Mare Selan -
Changed Password Not working after restart[What to do]
Recently I've changed my password, but it's not working after restart.
I've noticed that, input option is not taking one of the password characters which is '!'.
I've the recovery disks, system accepts my fingerprint too.
Any help will be highly appreciated.
Thanks.Hello,
Let me explain you what happened.
One evening I was trying to open my ThinkPad. Usually it asks for
fingerprint or password(I'm not sure which password, power-on/hard
drive). But this time I failed using my finger. and I tried with
password, but could not recall.
Then I restart and again tried with finger, this time it worked. Now
after login in Windows XP I removed all old fingerprints and create
few new. When I create new, it was asking for password, or new
password to replace. As I could not recall the pass, I've given new
password to replace.
Now to check I gave a restart. Fingerprint accepted for Power-on but
also asking for password again(Now I can see it's for Hard Drive). I
tried with new password. But it's not working. And even not taking one
character ('!') of the password.
Now can you tell me, if I did change password for Hard Drive in the
last description. Or is that possible to change it from Windows XP
environment. Else it's possible that the Hard Drive password remain as
it was which has been set from ThinkVantage before OS boot. Let me
know if you've any query which I've missed.
Thanks. -
Sql is not working after changing from MsAccess into sql server
Following Sql is not working after changing from MsAccess into sql server.
sum(trn.sales) as sales,
sum(trn.cost) as cost,
sales - cost as profit // Here is not working . can we not use sales a column. Please advise
from trn
Kind Regards
pol
polachanIt will not work if use two different column from the table or column from two different table
Example
sum(trn.sales * trn.rate) as salesAmount,
sum(trn.cost) as cost,
sum(trn.salesAmount)-sum(trn.cost) as profit ----- Here is not working . can we not use sales a column. Please advise
from trn
Regards
polachan -
Microsoft Excel 2013 add-in not working after update
I have originally posted this question at answers.microsoft.com and have been re-directed to post here. (http://answers.microsoft.com/en-us/office/forum/office_2013_release-excel/microsoft-excel-2013-add-in-not-working-after/298aff03-c90a-4a2a-b67b-07b6f3c7648c)
We are an organization with over 200 users and are currently using Microsoft Office 2013 (Click-to-run install via Office 365 portal), we have noticed that in Excel when we apply the monthly Office update, the add-in (e.g. Analysis Toolpak) would stop working
with the following error message displayed.
I tried updating from 15.0.4631.1004 to 15.0.4641.1003,
15.0.4641.1003 to 15.0.4649.1004, they all gave the same results.
I have checked the captioned file path and it is indeed missing, I think the update mechanism messed up the add-in somehow, a full re-install would fix it as quick or online repair is not doing the trick. This is not the only add-in it is affecting
as there are some 3rd party add-ins are affected as well.
Please advise how we can fix this without needing to re-install Microsoft Office. Thank you!I don't have 365 or C2R so I can't address your main question, so just a few thoughts which may not be applicable in your setup.
Check the addin manager to see if your addins are listed and ticked. If listed (ticked or not) check the registry to see where the location is written, if ticked look here
HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Excel\Options
and look for keys named OPENx, where x is the order number the addin is loaded
if not "ticked" instead of \Options look in \Add-in-Manager
With a VBA macro or in the VBE's immediate window return
Application.LibraryPath
Assuming you found a listing in the registry do the paths match, if not look in the .LibraryPath to see if the addins got unloaded there into the subfolder \Analysis
If you find the file(s) try un-installing and reinstalling the addins, but browse to the actual folder don't simply tick. If you can't find the files, copy them (from a different system) to the folder indicated by .LibraryPath. In the addin manager uninstall
them if installed, close the manager, open it again and the addins should be listed, tick to re-install.
You say your other addins don't work, I wonder if some mixup has occurred with what Excel thinks is the default path, but note for other addins the default addins path is returned by app.UserLibraryPath
Are you using a Chinese system?
Maybe you are looking for
-
Once you have put a CD into CMS, and you have converted the tracks to mp3, when you then burn the same tracks onto a blank disc, and put it into CMS, surely it should already have the info ? It always used to, but now i find it doesn't have the track
-
BI content datasource stopped working - fields gone missing...
Hi everybody! My customer is running a BI content version datasource 2LIS_02_ITM. In BI, the transfer structure for this datasource has suddenly stopped working. It's claiming that three fields are not delivered by the datasource in the source system
-
How to run a remote windows dll files and the drivers of the system using j
Dear Friends, I need some valuable info regd how to run a remote windows dll files and the drivers of the system using java reply regd thanking you
-
Font size difference between Dreamweaver, view in Safari and on friend's PC
In Dreamweaver CS3, I have a table with two cells containing type. In order to get the type to not appear too large, I need to size the type down to 6pt size on screen in Dreamweaver, then it appears like about 10pt normal size text in my Safari brow
-
Como subo un video a youtube desde alcatel ot firefox os
Quiero subir videos a yoitibe desde firefox pero no se como ayuda