E1200 Not Working after Verizon Modem Change

I have a new Linksys E2100 that was working well with an old Verizon modem. Then recently that modem gave up the ghost and I was issued another one (Westel Model 6100G). I have no problems with internet connectivity when connecting directly from my harddrive to the Verizon modem. I am also not having trouble connecting to the Linksys routher as I am able to see my wireless connection with no problem. However, when I try to set up the connnection with the E2100 in the loop (yes, it's connected correctly) I no longer have internet access.
I tried de-installing and re-installing the Linksys software (thinking maybe there was some new configuration that would be auto-detected with a new set-up), but this didn't help. I suspect that if the problem is with my Linksys router and not with my Verizon modem that there might be something that could be done to reconfigure something manually but I do not know enough about connections and wireless systems to trust myself not to mess something up.
At this point I'm assuming it's a Linksys issue since I know that my Verizon modem can connect me to the internet, so works properly. Is there some known incompatibility with this Linksys model and the Westell 6100G modem? Any advice how to proceed from here?

Let me me check if i got this one right, when your computer is connected to yor router wirelessly then you were able to get online but when your computer was hardwired to the router then you were not able to get online. Can you check the ip address that you will get when your computer was wirelessly connected and hardwired to the router.

Similar Messages

Linksys E1200 No Longer Working After Verizon Modem Replacement

I have a new Linksys E2100 that was working well with an old Verizon modem. Then recently that modem gave up the ghost and I was issued another one (Westel Model 6100G). I have no problems with internet connectivity when connecting directly from my harddrive to the Verizon modem. I am also not having trouble connecting to the Linksys routher as I am able to see my wireless connection with no problem. However, when I try to set up the connnection with the E2100 in the loop (yes, it's connected correctly) I no longer have internet access.
I tried de-installing and re-installing the Linksys software (thinking maybe there was some new configuration that would be auto-detected with a new set-up), but this didn't help. I suspect that if the problem is with my Linksys router and not with my Verizon modem that there might be something that could be done to reconfigure something manually but I do not know enough about connections and wireless systems to trust myself not to mess something up.
At this point I'm assuming it's a Linksys issue since I know that my Verizon modem can connect me to the internet, so works properly. Is there some known incompatibility with this Linksys model and the Westell 6100G modem? Any advice how to proceed from here?

JHStup wrote:
I want to add that I:
1) Have not yet tried returning my router to factory settings. (Is this step necessary? Is this usual, that the router needs to be returned to factory settings if the modem it was formerly connect to changes?)
2) I did do all of the power-down/reboot modem instructions per the router's software instructions.
Hello, yes reset and reconfigure. Just download the latest version of Cisco connect 1.4. That will set up the router for you and will update the router if needed. You can download it here http://homesupport.cisco.com/en-us/support/routers/E1200.

PR Item Level Release WF not working after Release Strategy change

Hi Experts,
           I did PR item Level Release Standard Work flow and it was working fine now due to client requirement we changed the release strategy and now when the PR workflow triggers it gives the Below mentioned error.
I really don't understand y after changing the release strategy workflow is not working and giving the following error.
Even if i restart the workflow in SWPR the same error is occuring.
Exception occurred    - Error when starting work item 000000390118
PROCESS_NODE     - Error when processing node '0000000003' (ParForEach index 000000)
CREATE                   - Error when creating a component of type 'Step'
CREATE_VIA_WFM - Agent determination for step '0000000003' failed
EVALUATE_AGENT_VIA_RULE - Error in resolution of rule 'AC00000148' for step '0000000003'
AC00000148             - Object type 'TS' not valid
Executing flow work item   - Work item 000000390118: Object FLOWITEM method EXECUTE cannot        be executed
Executing flow work item   - Error when processing node '0000000003' (ParForEach index 000000)
Regards,
Hari

Hello Hari,
please set a breakpoint at function module
ME_REL_GET_RESPONSIBLE
and see what happends in section
    CASE t16fc-frgwf.
* keine Ermittlung
      WHEN space.
        RAISE nobody_found.
* Ermittlung über T16fW
      WHEN '1'.
If using the T16FW-table, it should go to '1', otherwise it may that a user exit under '9' is used. So please check this.
Best wishes,
Florin

E1200 not working after factory defaults

After getting a E1200 router a few years ago i have reset the router many times, but during my most recent reset the internet only works on the computer that i set up the wireless from in the first place. it seems that the only computer that i cannot access 192.168.1.1 is the computer that the wireless works on. everytime i try to access the setup page on either my phone or another computer a note pops up and tells me that if i access this page internet may not work on my computer. i have tried everything that i could in the settings but nothing seems to work can someone help?

Hi david,
Check this link for steps on how to configure the router properly.

Mail on iPod Touch not working after iCloud password change

A few days ago, I was prompted to change the mail password for my iCloud account. My iPad and MacBook mail were both successfully updated and then accessed. When I tried my iPod, it said the password was incorrect. I delted the account and added it again, but the account is still not accessble.
After some research, I think my iPod is a second-generation model. It was purchased two years ago this month, so I was disappointed to see that it cannot be updated to iSO 5. Because I cannot have this upgrade, I cannot get the iCloud option in Settings which would help me out. I suspect this is the root of my mail problem.
Is there any way to get my mail to work?

Update: I just spent some time with an on-line chat. Turns out that when I switched to iCloud a few months ago, I missed an opportunity that started on May 1, 2012.
For those of you who have not yet made the switch to iCloud, the paragraph below might help. Please note that the Apple help said that I should use Firefox rather than Safari to access the site. Crazy! Why would an Apple Application not work.
What if I just want to keep using my email on all my devices?
As of May 1, you can choose to keep using your mail after MobileMe ends, even on devices that don’t meet the iCloud system requirements. Just go to me.com/move and select the option to keep using your email after MobileMe ends. Once you have completed this short process, your mail will continue to work on devices that don’t meet the iCloud requirements after MobileMe ends on June 30, 2012.

CFHTTP with https not working after server IP change (CF 10, Windows Server 2008 R2)

Hi,
We noticed that a call to https://www.googleapis.com/ via CFHTTP stopped working after our sysadmin switched the IP of our web server.
The error from ColdFusion is:
JSON parsing failure at character 1:'C' in Connection Failure
After researching, I tried using the keytool ([CF 10 root]/jre/bin/keytool.exe to import the top-level certificate (GeoTrust Global CA), which was exported from Google Chrome 42 in DER format.
I used the following flags:
-import -v -alias GAGLOBAL -file [.cer location] -keystore cacerts -storepass [password]
It appeared to add correctly, as it displayed the owner, issuer, etc. and asked if I wanted to trust the certificate. I replied "yes", and it responded "Certificate added to keystore" [Storing cacerts]. I then restarted the CF 10 application service. The same error persists.
Please advise.
Thanks,
Dave

Hi,
According to your description, my understanding is that manually added statics route disappeared after rebooting.
Try to use command line:
Route –p add destination mask subnetmask
gateway metric costmetric if
interface
Note:
Interface indicates the interface number. Type route print, the first column of
interface list, find the interface number corresponding to the MAC address.
Routes added by using the -p option are stored in the registry under the following key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip \Parameters\PersistentRoutes
You may open registry edit and check to see if the registry entry is added.
Besides, you may try a work around way to add this route entry in hosts file, which are stored in the local systemroot\System32\Drivers\Etc
folder.
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Why does printer not work after network password changed?

I changed the password on my Airport Extreme (5th Gen) which is connected to an iMac,base, and now my HP Photosmart C4750 will not print. I have tried uninstalling/reinstalling the printer software using the original HP printer CD. The error message "The selected WI-Fi Network "network name" is not within the reach of the device." Do I have to change the password back in order for it to work on my wireless?
Appreciate any assistance.

Hi,
The software provided for Mountain Lion does not offer any wireless configuration, therefore it may not work well on the OS.
Connect the printer to the network through the EWS by following the steps below:
Step one: Restore the printer's network default settings
Touch the ATM button () next to Wireless / Scan .
Touch the ATM button () next to Wireless Menu
Touch the ATM button () next to Wireless Settings .
Use the up and down ATM buttons () to select Restore Network Defaults , and then press OK .
Touch the ATM button () next to Yes to confirm your selection.
Step two: create a temporary network connection with the printer to access its EWS
Click the Wi-Fi icon on your Mac.
Click on Join Other Networks.
Click on Show Networks.
Select the HPSETUP network and click on Connect
Allow 2-3 minutes to establish the connection.
Step three: Follow the Wireless Setup Wizard from teh EWS
Open Safari and click the Bookmarks icon, select Bonjour from that window
Note: if the Bonjour option is missing under the Bookmarks menu click on Safari > Preferences > Bookmarks and check the Bonjour box within the Collections section.
From Bonjour double click the C4750. the EWS appears.
Open the Networking tab.
Click on Wireless.
Click the Start Wizard button on the bottom right side of that screen and follow the steps to connect the printer to your network.
Once you are done, reconnect your Mac to your home network by following step two but selectng your home network.
Shlomi

Password not working after ID name change?

Hi, I changed my Apple ID to correspond with my new email address, and when I did the password for the account stopped working on my iPhone even though I only changed the account name, not the password. So I changed the password (they made me use an uppercase letter and eight characters, whereas before it was simply six lowercase letters - what's up with that?). The new password is still not working. Can someone tell me what I'm doing wrong?

go to settings>store>sign out and then sign back in with correct info. they made you change the password for your safety, they had everyone make their passwords like this now

Portal not working after IP Address Change

Hi,
Because of some reasons, IP Address of the unix machine where portal was installed is changed and all of sudden portal is not working. On accessing the portal on new IP, we are getting "Service Unavailable, Cannot process request for dynamic resources". Can anyone please advice on this?
Regards,
Chandra

Hi,
Have you restarted the portal ?
This might be needed even if you are using hostnames in the config, since the JVM by default caches DNS lookups for ever. See Controlling DNS caching in the Java Virtual Machine (i.e. J2EE WAS) for more info

WIFI ePrint B110a not working after new modem router

I have had an ePrint Photosmart B110a for over a year. It has worked great.
However recently our wifi modem router died, and we had to get a new one. It is a Dlink DSL 2875 AL.
I have set up the router and connected the printer to it via WIFI.
Now here is the problem. Immediately after I connect it, the printer works for about 15 seconds.
In other words, I reconnect the WIFI on the printer to the WIFI network, then if I immediately try to print something on my iPhone via WIFI, it will work.
However within less than 30 seconds if I try to print something else, it will say "printer is offline" and then won't show the printer at all in the iPhone "select printer" options menu.
I've spent hours on trying to solve this situation, I want to print over WIFI and it used to work great.
Could the modem be faulty? Could the printer be faulty? Is it a setting?
How do I fix this?
Please help.

Hello Tommotom,
Welcome to the HP Support Forums!
I see that you are having issues with the B110a and your iPhone when trying to print since changing your modem / router. I don't think there is an issue with the printer, iPhone or router, some settings may just need to be adjusted.
I see that the new router is a dual band router. You want to make sure that the printer and iPhone are connecting to only the 2.4 Ghz portion of the router. The printer will only work with 2.4 Ghz, the iPhone on the other hand, can connect to either.
Apple devices pick up the printer signal via the Bonjour protocol, I have worked with routers in the past that will not constantly broadcast the Bonjour protocol, this would cause your described issue too. To check the router, use this App on the phone, suggested by Shirlzz1: Help Determine if your router can support AirPrint with the Bonjour Discovery App.
Lastly, for now, check to ensure that the ports on the router are all open to allow full printing ability, this post will show you the ports: Check the Anti-Virus for Blocked Ports and Timed Scans.
I look forward to hearing back from you.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Dbconsole does not work after windows domain change

I have change windows domain of a oracle 10g server when it was already installed. After that, I can not install dbconsole in a new instance. The service starts but the login screen does not appear.
Does anyone have any idea ?

Have you tried to start directly with the emctl command directly on the command line?
What's the error message displayed.
When you change your domain the asociated configuration file is not matched, and emctl is unable to find it.
You should try to locate a directory named like this: FullyQualifiedHostName_InstanceName
Once you have changed the domain, oracle is unable to find a configuration with the domain previously stated. You'll have to reconfigure and may be recreate your repository.
Commands follow:
set oracle_sid=YourInstanceName
emctl stop dbconsole
emca -repos recreate
emca -deconfig dbcontrol db
emca -config dbcontrol db

Hp5510 black ink still not working after two cartridge changes and hard reset

Can you help?
Our 5510 does not print the black ink, we have tried hard reset, two new genuine black printer cartridges and it still refuses to play ball. All other colours print ok.
Thanks steve

Hello @Bigeady860,
Welcome to the HP Support Forums! I see you are running into some print quality issues on your HP Photosmart 5510, you are unable to print in black ink.
I would like you to continue here: Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages, I understand you may have done some of these steps already but I need you to complete all steps in order to resolve the missing black issue you are experiencing.
Please note: There are three printhead cleaning stages. Complete all three stages if necessary. If the printhead is badly clogged, it might require another cleaning cycle. If so, wait 30 minutes after the last (third) cleaning stage to start the first stage of the cleaning process over again.
If you are still unable to print in black ink, I suspect the issue may be the printer and not the cartridge. Please let me know which Country/Region you are in as well as the product Warranty status: HP Warranty Checker
I hope to hear from you soon.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Rss Feeds on Samsung Continuum not working after Verizon Update

I have been wondering for awhile why my Samsung Continuum will not recieve Rss feeds when I subscribe to them. I have read very little on why or how to fix this. This sucks as those Rss feeds are really useful. My bro's and my phone (both the same phone) have this problem. I have not reset my phone. Anything would be appreciated!

I'm having this same problem. Any word on if a patch is coming? I would be happy with Verizon just admitting their update was worthless and gave us an update letting us know they are actually aware of the issue rather than saying they dont know whats going on and offer to replace a perfectly good phone because they wont listen to their customers. Simlar to what raphana said...for what we pay they could have atleast tested the update before putting it live!

IPhone 4s Voice mail notification not working after switching from Verizon to PagePlus.

iPhone 4s Voice mail notification not working after switching from Verizon to PagePlus. How can I get the notifications working?

Contact your carrier - voicemail, and visual voicemail, is a carrier feature.

ZTE Mf190s Internet USB Modem not working after upgrading to Yosemite.

ZTE Mf190s Internet USB Modem not working after upgrading to Yosemite. any salutation!!

Follow these steps:
go to system preferences.. Open Network..
CONFIGURATION: DEFAULT
TELEPHONE NUMBER : #99*
leave account name and password columns blank
Now go to ADVANCED
IN MODEM MENU
VENDOR : GENERIC
MODEL : GPRS / 3G
Press ok
Then CONNECT.. Enjoy.

E1200 Not Working after Verizon Modem Change

Similar Messages

Maybe you are looking for