Portal Server Webserver Installation Failure?
I'm installing SP3 on Solaris 7. Getting 'libplc3.so: open failed: no such file' during install of the SUNWwtws (NES) package. I searched for libplc3.so and did not find it anywhere on my server... Where does this file come from? I am attempting a straight-forward install at this point. Thanks!
Check if the package SUNWwtws is already installed. You can check this using
#pkginfo SUNWwtws
If found, remove the package using 'pkgrm' and then continue with a fresh installation. The file 'libplc3.so' is usually found in /opt/netscape/server4/instances/bin/https/lib which means an instance of the Web Server is running thus clashing in the installation of SUNWwtws package.
Similar Messages
-
Portal Server 7 installation problem?
Firstly I have installed JES 2005Q4, after that I want to upgrade portal server 6 to the portal server 7. and when I try it, it gave these errors. What I have to do?
1. Install
2. Start Over
3. Exit Installation
What would you like to do [1] {"<" goes back, "!" exits}?
Java Enterprise System
|-1%--------------25%---java.io.IOException: java.io.IOException: /opt/sun/portal/bin/psconfig: not found
at java.lang.UNIXProcess.<init>(UNIXProcess.java:148)
at java.lang.ProcessImpl.start(ProcessImpl.java:65)
at java.lang.ProcessBuilder.start(ProcessBuilder.java:451)
at java.lang.Runtime.exec(Runtime.java:591)
at java.lang.Runtime.exec(Runtime.java:464)
at com.sun.orion.installer.common.config.OrionConfigurator.executeCmdWithArgs(Unknown Source)
at com.sun.orion.installer.portalserv.config.PortalServerConfigurator.unconfigure(Unknown Source)
at com.sun.orion.installer.common.config.OrionConfigurator.performUnconfiguration(Unknown Source)
at com.sun.orion.installer.common.config.ConfigLeaf.uninstall(Unknown Source)
at com.sun.install.products.InstallComponent.performUninstallation(InstallComponent.java:1637)
at com.sun.install.products.InstallNode.finishUninstall(InstallNode.java:1270)
at com.sun.install.products.InstallComponent.performUninstallation(InstallComponent.java:1642)
at com.sun.install.products.InstallNode.finishUninstall(InstallNode.java:1270)
at com.sun.install.products.InstallComponent.performUninstallation(InstallComponent.java:1642)
at com.sun.install.products.Product.performUninstallation(Product.java:223)
at com.sun.install.products.InstallNode.CheckCancelledAndWriteToLog(InstallNode.java:965)
at com.sun.install.products.InstallNode.startInstall(InstallNode.java:1090)
at com.sun.install.products.InstallComponent.performInstallation(InstallComponent.java:1457)
at com.sun.install.products.Product.performInstallation(Product.java:651)
at com.sun.install.tasks.ProductTask.perform(ProductTask.java:153)
at com.sun.wizards.core.Sequence.perform(Sequence.java:343)
at com.sun.wizards.core.SequenceManager.run(SequenceManager.java:226)
at java.lang.Thread.run(Thread.java:595)
Error in executing command : /opt/sun/portal/bin/psconfig unconfig /tmp/psunconfig_devserver.efes-yazilim.com_114287575411016186.xml ------------50%-----------------75%--------------100%|
Installation Failed
No software was installed.
You can view the installation summary and log by using the choices below.
Summary and log files are available in /var/sadm/install/logs/.
You can refer to the Troubleshooting chapter of the Java Enterprise System
Installation Guide to resolve the installation issues.
Enter 1 to view installation summary and Enter 2 to view installation logs
[1] {"!" exits} 2
Installation Log
Installing Java Enterprise System
Log file: /var/opt/sun/install/logs/Java_Enterprise_System_install.
B03201923
Installed: /var/sadm/prod/sun-ps7_0-
entsys/uninstall_Sun_Java_tm__Enterprise_System_2005Q4.class
Uninstaller is at: /var/sadm/prod/sun-ps7_0-
entsys/uninstall_Sun_Java_tm__Enterprise_System_2005Q4.class
OrionUninstallersun-ps7_0-entsys
Installing RPM: sun-ps7_0-entsys
RPM sun-ps7_0-entsys successfully installed.
Installing RPM: sun-ps7_0-entsys-l10n
RPM sun-ps7_0-entsys-l10n successfully installed.
Mobile Access Component
Skipping component sun-mobileaccess because it is already installed.
Skipping component sun-mobileaccess-config because it is already installed.
Portal Server Administrator
Installing RPM: sun-portal-admin
file /opt/sun/portal/lib/config.jar from install of sun-portal-admin-7.0-1
conflicts with file from package sun-portal-configurator-6.3-25.12.2
file /opt/sun/portal/lib/PSversion.properties from install of sun-portal-admin-
7.0-1 conflicts with file from package sun-portal-core-6.3-25.12.2
file /opt/sun/portal/lib/jdom.jar from install of sun-portal-admin-7.0-1
conflicts with file from package sun-portal-portlet-6.3-25.12.2
Error: RPM sun-portal-admin install failed}.
Install complete. Package: sun-portal-admin
<--[64%]--[ENTER To Continue]--[n To Finish]--> {"!" exits}
rpm: Skipping rpm remove of sun-portal-admin, not installed.
rpm: Skipping rpm remove of sun-portal-search, not installed.
rpm: Skipping rpm remove of sun-portal-portlets, not installed.
rpm: Skipping rpm remove of sun-portal-base, not installed.
rpm: Skipping rpm remove of sun-portal-admin, not installed.
Installing RPM: sun-mobileaccess-config
RPM sun-mobileaccess-config successfully installed.
Installing RPM: sun-mobileaccess
RPM sun-mobileaccess successfully installed.
rpm: Skipping rpm remove of sun-mobileaccess-config, not installed.
rpm: Skipping rpm remove of sun-mobileaccess, not installed.
Enter 1 to view installation summary and Enter 2 to view installation logs
[1] {"!" exits}After a successful install the Directory, AM servers are down. You will have to start them after the install.
Stop start the process below in the order:
Stop/Start Directory Server instance:
Stop/Start Webcontainer instance running AM Server and Portal Server
Restart Cacao /opt/SUNWcacao/bin/cacaoadm restart
If the above does not fix it, take a look at the /var/opt/SUNWportal/portals/portal1/logs/<portal-instance>/*.logs
and the webcontainer logs for more details -
I am installing SQL Server 2012 Developer (from ISO image written on DVD), my machine has Windows 7 (Edit: Windows 7 with service pack 1) on it. This machine already has SQL Express and SQL 2008 R2 Express installed in it.
On running 2012 setup it goes fine from Setup Support Rules to Installation Progress. In Installation Progress after some progress installation fails.
Windows show the following components couldn't installed:
Managment Tools Complete Failed. Client Tools Connectivity Failed. Client Tools SDK Failed. Client Tools Backwards Compantibility Failed. Managment Tools Basic Failed. SQL Server Data Tools Failed. Reporting Services -Native Failed. Database Engine
Services Failed. Data Quality Services Failed. full-Text and Semantic Extractins for Search Failed. SQL Server Replication Failed. Integration Services Failed. Analysis Services Failed. SQL Client Connectivity SDK Failed.
In detail for failure of every component it provide these details:
Action required:
Use the following information to resolve the error, and then try the setup process again.
Feature failure reason:
An error occurred for a dependency of the feature causing the setup process for the feature to fail.
In summary log file it provide the following details:
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2068643839
Start time: 2012-07-31 16:23:37
End time: 2012-07-31 16:33:32
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for Adv_SSMS: Use the following information to resolve the error, and then try the setup process again.
Next step for Conn: Use the following information to resolve the error, and then try the setup process again.
Next step for SDK: Use the following information to resolve the error, and then try the setup process again.
Next step for BC: Use the following information to resolve the error, and then try the setup process again.
Next step for SSMS: Use the following information to resolve the error, and then try the setup process again.
Next step for BIDS: Use the following information to resolve the error, and then try the setup process again.
Next step for RS: Use the following information to resolve the error, and then try the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, and then try the setup process again.
Next step for DQ: Use the following information to resolve the error, and then try the setup process again.
Next step for FullText: Use the following information to resolve the error, and then try the setup process again.
Next step for Replication: Use the following information to resolve the error, and then try the setup process again.
Next step for IS: Use the following information to resolve the error, and then try the setup process again.
Next step for AS: Use the following information to resolve the error, and then try the setup process again.
Next step for SNAC_SDK: Use the following information to resolve the error, and then try the setup process again.
Machine Properties:
Machine name: Haansi-PC
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
SQL Server 2005 SQLEXPRESS MSSQL.1
Database Engine Services 1033 Express Edition
9.4.5000 No
SQL Server 2005 SQLEXPRESS MSSQL.1
SQL Server Replication 1033 Express Edition
9.4.5000 No
SQL Server 2005 SQLEXPRESS MSSQL.1
SharedTools 1033
Express Edition 9.4.5000 No
SQL Server 2005
Tools 1033
Express Edition 9.4.5000 No
SQL Server 2005
ToolsClient 1033
Express Edition 9.4.5000 No
SQL Server 2005
ToolsClient\Connectivity 1033 Express Edition
9.4.5000 No
SQL Server 2008 R2 SQLSERVER08EXPR2 MSSQL10_50.SQLSERVER08EXPR2 Database Engine Services 1033
Express Edition 10.50.1617.0 No
SQL Server 2008 R2 SQLSERVER08EXPR2 MSSQL10_50.SQLSERVER08EXPR2 SQL Server Replication 1033
Express Edition 10.50.1617.0 No
SQL Server 2008 R2
Management Tools - Basic 1033 Express Edition
10.50.1617.0 No
SQL Server 2012
LocalDB 1033
Express Edition 11.0.2318.0 No
SQL Server 2012
Reporting Services - SharePoint
11.0.2100.60 No
Package properties:
Description: Microsoft SQL Server 2012
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: F:\x64\setup\
Installation edition: Developer
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLAgent$SS2012
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Data
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: TABULAR
ASSVCACCOUNT: NT Service\MSOLAP$SS2012
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Manual
ASSYSADMINACCOUNTS: PC\Haansi
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Automatic
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20120731_161013\ConfigurationFile.ini
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, BIDS, CONN, IS, BC, SDK, SSMS, ADV_SSMS, SNAC_SDK
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SS2012
FTSVCPASSWORD: <empty>
HELP: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SS2012
INSTANCENAME: SS2012
ISSVCACCOUNT: NT Service\MsDtsServer110
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: NT Service\ReportServer$SS2012
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Manual
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT Service\MSSQL$SS2012
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: Haansi-PC\Haansi
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20120731_161013\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Client Tools Connectivity
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Client Tools SDK
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Client Tools Backwards Compatibility
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Management Tools - Basic
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: SQL Server Data Tools
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Integration Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Analysis Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: SQL Client Connectivity SDK
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20120731_161013\SystemConfigurationCheck_Report.htmPlease help.
I did what you suggested, but, still got error message to install SQL server data tools: Here is the log.
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2068037632
Start time: 2014-09-29 15:05:38
End time: 2014-09-29 15:15:55
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for SSDTBI_VS2012: Use the following information to resolve the error, and then try the setup process again.
Machine Properties:
Machine name: MSBI
Machine processor count: 4
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered Configured
SQL Server 2008 Management Tools - Basic
1033 Express Edition 10.0.1600.22 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Database Engine Services 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER SQL Server Replication 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Full-Text and Semantic Extractions for Search 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Data Quality Services 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSAS11.MSSQLSERVER Analysis Services 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSRS11.MSSQLSERVER Reporting Services - Native 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Management Tools - Basic
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Management Tools - Complete
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Client Tools Connectivity
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Client Tools Backwards Compatibility
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Client Tools SDK
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 SQL Server Data Tools
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Integration Services
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Reporting Services - SharePoint
11.0.2100.60 No Yes
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
Installation location: C:\9f7a58aa5d6d76ffe6be968a4ad339f5\x86\setup\
Installation edition: Express
Slipstream: True
SP Level 1
Patch Level: 11.1.3128.0
Product Update Status:
Success: KB 2674319, KB 2793634
Product Updates Selected for Installation:
Title: Service Pack 1
Knowledge Based Article: KB 2674319
Version: 11.1.3000.0
Architecture: x86
Language: 1033
Title: SQL Server 2012 SP1 GDR Product Update
Knowledge Based Article: KB 2793634
Version: 11.1.3128.0
Architecture: x86
Language: All
Update Source: MU
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: <empty>
AGTSVCPASSWORD: <empty>
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SSDTBI_VS2012, SNAC_SDK
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTANCEID: <empty>
INSTANCENAME: <empty>
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: <empty>
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: <empty>
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: true
TCPENABLED: 0
UIMODE: AutoAdvance
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files (x86)\Microsoft SQL Server\110\Setup Bootstrap\Log\20140929_150412\ConfigurationFile.ini
Detailed results:
Feature: SQL Server Data Tools - Business Intelligence for Visual Studio 2012
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft Visual Studio Tools for Applications 2012
Component error code: 0x80044000
Component log file: C:\Program Files (x86)\Microsoft SQL Server\110\Setup Bootstrap\Log\20140929_150412\VSTA2012_LangsSupport_Cpu32_1.log
Error description: VS Shell 2012 installation has failed with exit code -2147205120.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3436.0&EvtType=VSTA2012_LangsSupport%40Install%400x-2147205120
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files (x86)\Microsoft SQL Server\110\Setup Bootstrap\Log\20140929_150412\SystemConfigurationCheck_Report.htm -
SQL Server 2008 Installation Failure
On a Windows XP (SP3 DEU) box, which has Visual Studio 2005, Visual Studio 2008, all .net versions, and SQL Server Express 2005 installed, SQL Server Express 2008 R2 installation failed with
AclPermissionsFacet
Checks if the SQL Server registry keys are consistent.
Failed
The SQL Server registry keys from a prior installation cannot be modified. To continue, see SQL Server Setup documentation about how to fix registry keys.
Detail_GlobalRules.txt contains
2010-10-11 17:13:09 Slp: ------------------------------------------------------------
2010-10-11 17:13:11 Slp: Could not fix registry key HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\90\Tools\ShellSEM\CLSID\{3B476D30-A401-11D2-AAD4-00C04F990171}.
2010-10-11 17:13:11 Slp: System.NullReferenceException: Der Objektverweis wurde nicht auf eine Objektinstanz festgelegt.
2010-10-11 17:13:11 Slp: bei Microsoft.SqlServer.Configuration.FixSqlRegistryKey.Program.ContainsInheritedAce(Byte[] securityDescriptor)
2010-10-11 17:13:11 Slp: bei Microsoft.SqlServer.Configuration.FixSqlRegistryKey.Program.FixRegistryKey(String keyName)
2010-10-11 17:13:11 Slp: bei Microsoft.SqlServer.Configuration.FixSqlRegistryKey.Program.FixRegistryKeyAndSubKeys(RegistryKey key)
2010-10-11 17:13:11 Slp: Could not fix registry key HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\90\Tools\ShellSEM\CLSID\{3B476D3A-A401-11D2-AAD4-00C04F990171}.
2010-10-11 17:13:11 Slp: System.NullReferenceException: Der Objektverweis wurde nicht auf eine Objektinstanz festgelegt.
2010-10-11 17:13:11 Slp: bei Microsoft.SqlServer.Configuration.FixSqlRegistryKey.Program.ContainsInheritedAce(Byte[] securityDescriptor)
2010-10-11 17:13:11 Slp: bei Microsoft.SqlServer.Configuration.FixSqlRegistryKey.Program.FixRegistryKey(String keyName)
2010-10-11 17:13:11 Slp: bei Microsoft.SqlServer.Configuration.FixSqlRegistryKey.Program.FixRegistryKeyAndSubKeys(RegistryKey key)
2010-10-11 17:13:12 Slp: ------------------------------------------------------------
2010-10-11 17:13:12 Slp: Rule 'AclPermissionsFacet' detection result: AreSqlAclPermissionsCanonical= False
The two registry keys had broken ACLs (in regedit > permissions, they were shown as "Everyone, Full Access" but on Advanced view, no ACEs showed up.
I removed the "Everyone" setting and re-enabled inheritance from HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\90\Tools\ShellSEM.
This resolved this problem.In case if you haven't fix this:
Steps
Located HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server in registry
Right click and go to Permission
Click on Advance
Tick on both check box (I. Inherit from parent the permission... II. Replace permission entries on all child objects...), click
OK
Click OK again
That fixed mine, hopefully it does the same to yours -
Installing Portal server, does it include App server?
Hi All,
I hope that you can give me a pointer on this one.
I want to use Portal server to develop portlets for .
when i will install it, would it automatically install Sun Application server with it or do i have to do it seperately.
I understand there is a Identity Server that must exist.
Will it be installed too or should i do it manually and then somehow show where app server/identity servers are?
If so , how can i show portal server where App Server is.
Thank you all very much
SergeHi Serge,
Just run the JES installer and select to install the portal server, the installer will automatically select the pre-requisites. When doing a sandbox installation, just install all components on one server:
- application server
- portal server
- access manager
- directory server
Be sure to read the release notes and the JES installation guide.
Regards, Robert -
Hi All,
I am trying to install Portal server in my machine using BS_2005_SR3_SAP_Installation_Master.
At the time of installation I didnu2019t get the "SAP Systems" Folder in the SAP GUI list screen at the "Choose Service" step to define "Central System".
Please share your view on the issue. I'm using portal; server dumps in place of istallation CDs, which i don't have.
If possible please share installation steps and proper installation master for 32bit OS.
Thanks!!!
DeepakHave you had a look at the installation guide? There everything should be described in detail.
Anja -
Mobile Web Server installation failure
Hi Forum,
I have used the server on my phone previously. It worked well.
Now after a updating my phone, I cannot even install the application. It runs through the installtion and then starts a "installing web server" half way through which it fails!
Despite installation failure it features in my App Manager but not in 'My Own' folder. I uninstall it and reinstall to no avail.
I am a Nokia N93 user.
Would greatly appreciate assistance as I want to demo the software for my class.
Best,
wirefreeI had exactly the same problem ("Installation failed" at install time) but finally got it running.
My steps:
0. I removed the unfinished installation of the MWS.
1. I manually installed the Open-C libs (only glib.sis, pips_nokia_1_3_SS.sis and ssl.sis) from the SDK here: http://www.forum.nokia.com/main/resources/technologies/openc_cpp/
2. Then I manually installed python (PythonScriptShell_1_4_4_3rdEd.sis) from here: http://sourceforge.net/project/showfiles.php?group_id=154155&package_id=171153&release_id=609802
3. Finally I reinstalled the mobile web server (v1.4 beta) . No error message anymore. Everything works like a charm now. Hope this helps. :-)
Kind regards,
Florian -
Portal Server 7.2 gui installer
We are installing Portal Server 7.2 in a sun sparc solaris 10 server thru remote desktop.
The gui installer screen is not completely showing up and mostly white.
ANy reason why it is so?I also installed Portal 7.2 with remote X and I had no such problem.
-
DPM 2010 installation failure (SQL-server Reporting Services Problem)
Hi everyone,
The last 2 days I have been trying to get DPM 2010 installed on a DC. I know this is not recommended, but for our company with the current setup it's the only way to do it.
I have been reading some Microsoft articles (http://technet.microsoft.com/en-us/library/ff399416.aspx) about doing this but I fail to do so.
I have made all of the right service accounts (I guess) and am doing everything in the guide but still get the same error message over and over again:
Setup has detected that the installation of Reporting Services is not correctly configured or no instance of Reporting Services is linked to DPM2010 of SQL Server
I just can't get my head around it. This is the error message when I try to install DPM 2010 using an existing SQL-database which I have configured in the SQL 2008-server sp1 installation.
I have enclosed some screenshots so you could maybe check some things that are not correct? Hopefully we can get this issue resolved, because it's driving me crazy to be honest!
Physical server which is ADC and where I need to install SQL-server and DPM: VMBACKUP
The service account for DPM is: DPMSQLSvcsAcct
Also have another service account: DPMR$VMBACKUP
I have also enclosed the error log located in C:\DPMLogs\This is the DOM error log:
MSI (s) (D0:4C) [14:59:59:626]: Windows Installer reconfigured the product. Product Name: Microsoft Application Error Reporting. Product Version: 12.0.6015.5000. Product Language: 1033. Manufacturer: Microsoft Corporation. Reconfiguration success or error status: 0.
MSI (s) (D0:4C) [14:59:59:627]: Deferring clean up of packages/files, if any exist
MSI (s) (D0:4C) [14:59:59:628]: MainEngineThread is returning 0
MSI (s) (D0:D8) [14:59:59:631]: RESTART MANAGER: Session closed.
MSI (s) (D0:D8) [14:59:59:631]: No System Restore sequence number for this installation.
=== Logging stopped: 27/03/2012 14:59:59 ===
MSI (s) (D0:D8) [14:59:59:632]: User policy value 'DisableRollback' is 0
MSI (s) (D0:D8) [14:59:59:632]: Machine policy value 'DisableRollback' is 0
MSI (s) (D0:D8) [14:59:59:632]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (D0:D8) [14:59:59:632]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (D0:D8) [14:59:59:633]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (D0:D8) [14:59:59:633]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (D0:D8) [14:59:59:634]: Restoring environment variables
MSI (s) (D0:D8) [14:59:59:634]: Destroying RemoteAPI object.
MSI (s) (D0:90) [14:59:59:635]: Custom Action Manager thread ending.
MSI (c) (9C:04) [14:59:59:636]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (9C:04) [14:59:59:637]: MainEngineThread is returning 0
=== Verbose logging stopped: 27/03/2012 14:59:59 ===
[27/03/2012 14:59:59] Information : MsiInstallProduct returned 0.
[27/03/2012 14:59:59] Information : End install.
[27/03/2012 14:59:59] Information : **************************************************************************************
[27/03/2012 14:59:59] Information : **************************************************************************************
[27/03/2012 14:59:59] Information : Start Inspect.
[27/03/2012 14:59:59] Information : Check processor configuration.
[27/03/2012 14:59:59] Information : Query WMI provider for configuration of processor. (Namespace : \\localhost\root\cimv2).
[27/03/2012 14:59:59] Information : Query for WMI class. (Query : SELECT * FROM Win32_Processor).
[27/03/2012 15:00:00] Data : Clock speed of processor = 2500
[27/03/2012 15:00:00] Data : Manufacturer of processor = GenuineIntel
[27/03/2012 15:00:00] Information : Check the amount of RAM.
[27/03/2012 15:00:00] Information : Query WMI provider for configuration of memory. (Namespace : \\localhost\root\cimv2).
[27/03/2012 15:00:00] Information : Query for WMI class. (Query : SELECT * FROM Win32_OperatingSystem).
[27/03/2012 15:00:00] Data : Found memory = 14677964
[27/03/2012 15:00:00] Data : Total amount of memory = 14677964
[27/03/2012 15:00:00] Information : Check the version of Microsoft Management Console on the machine.
[27/03/2012 15:00:00] Data : Version of Microsoft Management Console on the machine = 6.1.7600.16385
[27/03/2012 15:00:00] Data : Required version of Microsoft Management Console = 5.2.3790.2560
[27/03/2012 15:00:00] Information : MMC correct version is detected.
[27/03/2012 15:00:00] Information : Check if this machine is part of active directory.
[27/03/2012 15:00:00] Data : Looking for Active Directory node = LDAP://RootDSE
[27/03/2012 15:00:00] Information : Active Directory is detected on this machine.
[27/03/2012 15:00:00] Information : Check if the machine role is Domain Controller.
[27/03/2012 15:00:00] Information : Query for WMI class. (Query : SELECT * FROM Win32_ComputerSystem).
[27/03/2012 15:00:00] Data : Localhost in Computer role = 4
[27/03/2012 15:00:00] * Warning : DPM Setup has detected that this computer is a domain controller.Make sure that you have followed the steps given in the link below before proceeding with the DPM Setup.
[27/03/2012 15:00:00] Information : The machine role is a Domain Controller.
[27/03/2012 15:00:00] Information : Check if Volsnap QFE is applied.
[27/03/2012 15:00:00] Information : Volsnap QFE is applied on this system.
[27/03/2012 15:00:00] Information : Check if Logical Disk Manager (LDM) QFE is applied.
[27/03/2012 15:00:00] Information : LDM QFE is applied on this system.
[27/03/2012 15:00:00] Information : Check if KB962975 QFE is applied.
[27/03/2012 15:00:00] Information : KB962975 QFE is applied on this system.
[27/03/2012 15:00:00] Information : Check if KB975759 QFE is applied.
[27/03/2012 15:00:00] Information : KB975759 QFE is applied on this system.
[27/03/2012 15:00:00] Information : Check if KB955543 QFE is applied.
[27/03/2012 15:00:00] Information : KB955543 QFE is applied on this system.
[27/03/2012 15:00:00] Information : Detect if Powershell is installed.
[27/03/2012 15:00:00] Data : Installed Version of Windows Powershell. = 6.1.7600.16385
[27/03/2012 15:00:00] Data : Minimum Required version of Windows Powershell. = 6.0.6002.18111
[27/03/2012 15:00:00] Information : Required version of Powershell software is installed on this system.
[27/03/2012 15:00:00] Information : Check if reboot is required because of Dot Net installation.
[27/03/2012 15:00:00] Information : Reading the registry key Software\Microsoft\Microsoft Data Protection Manager\Setup\DotNetRequiredReboot.
[27/03/2012 15:00:00] Information : Registry Key Software\Microsoft\Microsoft Data Protection Manager\Setup\DotNetRequiredReboot is absent.
[27/03/2012 15:00:00] Information : Reboot is not required.
[27/03/2012 15:00:00] Information : Detect if SIS Service is running.
[27/03/2012 15:00:00] Information : Detect if SIS Filter service SIS is running.
[27/03/2012 15:00:00] Information : SIS Service SIS is running on this system.
[27/03/2012 15:00:00] Information : Check the version of Windows Installer on the machine.
[27/03/2012 15:00:00] Data : Version of Windows Installer on the machine = 5.0.7601.17514
[27/03/2012 15:00:00] Data : Required version of Windows Installer = 4.5.6001.18000
[27/03/2012 15:00:00] Information : Windows Installer correct version is detected.
[27/03/2012 15:00:00] Information : Check if Removable Storage Service (Rsm) is disabled or not.
[27/03/2012 15:00:00] Information : Query WMI provider for Service Details. (Namespace : \\VMBACKUP\root\cimv2).
[27/03/2012 15:00:00] Information : Query for WMI class. (Query : SELECT * FROM Win32_Service WHERE Name='NtmsSvc').
[27/03/2012 15:00:01] * Exception : Expecting the following exception. Ignoring intentionally. => Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.ServiceNotFoundException: NtmsSvc : Service not found
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetServiceConfig(String serviceName, String machineName, ConnectionOptions wmiConnectionOptions)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectConfigs.CheckRsmServiceConfig(InspectContext context)
[27/03/2012 15:00:01] Information : Check if reboot is required.
[27/03/2012 15:00:01] Information : Reading the registry key Software\Microsoft\Microsoft Data Protection Manager\Setup\RebootRequired.
[27/03/2012 15:00:01] Information : Registry Key Software\Microsoft\Microsoft Data Protection Manager\Setup\RebootRequired is absent.
[27/03/2012 15:00:01] Information : Reboot is not required.
[27/03/2012 15:00:01] Information : Check if SQL Server 2008 is installed.
[27/03/2012 15:00:01] Information : Query WMI provider for SQL Server 2008. (Namespace : \\VMBACKUP\root\Microsoft\SqlServer\ComputerManagement10).
[27/03/2012 15:00:01] Information : Query for WMI class. (Query : Select * from SqlServiceAdvancedProperty where ServiceName='{0}' and PropertyName='Version').
[27/03/2012 15:00:01] Information : SQL Server 2008 MSDPM2010 instance is not present on this system.
[27/03/2012 15:00:01] *** Error : Setup has detected that the instance provided is not a SQL Server 2008 instance. Please provide a SQL Server 2008 instance having Service Pack 1 installed.
[27/03/2012 15:00:01] Information : Check if SQL Server 2008 Tools is installed.
[27/03/2012 15:00:01] Information : SQL Server 2008 Tools is installed
[27/03/2012 15:00:01] Information : Check if SQL Server 2008 SP1 is applied.
[27/03/2012 15:00:01] Information : Query WMI provider for SQL Server 2008 SP1. (Namespace : \\VMBACKUP\root\Microsoft\SqlServer\ComputerManagement10).
[27/03/2012 15:00:01] Information : Query for WMI class. (Query : Select * From SqlServiceAdvancedProperty Where ServiceName='MSSQL$MSDPM2010' AND PropertyName = 'SPLEVEL').
[27/03/2012 15:00:02] Information : Sql Server 2008 Service Pack Level is 0
[27/03/2012 15:00:02] Information : SQL Server 2008 SP1 is not present on MSDPM2010 instance of this system.
[27/03/2012 15:00:02] *** Error : Setup has detected that SQL Server 2008 Service Pack 1 has not been installed on the VMBACKUP\MSDPM2010 instance.Install SQL Server 2008 Service Pack 1 or higher and try again.
[27/03/2012 15:00:02] Information : Check SQL Server Agent service configuration.
[27/03/2012 15:00:02] Data : SQL Server instance name = MSDPM2010
[27/03/2012 15:00:02] Information : Query WMI provider for Service Details. (Namespace : \\VMBACKUP\root\cimv2).
[27/03/2012 15:00:02] Information : Query for WMI class. (Query : SELECT * FROM Win32_Service WHERE Name='SQLAgent$MSDPM2010').
[27/03/2012 15:00:02] * Exception : Expecting the following exception. Ignoring intentionally. => Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.ServiceNotFoundException: SQLAgent$MSDPM2010 : Service not found
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetServiceConfig(String serviceName, String machineName, ConnectionOptions wmiConnectionOptions)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectConfigs.CheckSqlAgentServiceConfig(InspectContext context)
[27/03/2012 15:00:02] *** Error : Service SQLAgent$MSDPM2010 is not installed. The SQL Server 2008 installation is not valid.Uninstall SQL Server 2008 and then run DPM Setup again.
[27/03/2012 15:00:02] Information : SQL Server Agent service configuration is not correct.
[27/03/2012 15:00:02] Information : Check SQL Server service configuration.
[27/03/2012 15:00:02] Data : SQL Server instance name = MSDPM2010
[27/03/2012 15:00:02] Information : Query WMI provider for Service Details. (Namespace : \\VMBACKUP\root\cimv2).
[27/03/2012 15:00:02] Information : Query for WMI class. (Query : SELECT * FROM Win32_Service WHERE Name='MSSQL$MSDPM2010').
[27/03/2012 15:00:02] * Exception : Expecting the following exception. Ignoring intentionally. => Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.ServiceNotFoundException: MSSQL$MSDPM2010 : Service not found
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetServiceConfig(String serviceName, String machineName, ConnectionOptions wmiConnectionOptions)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectConfigs.CheckSqlServerServiceConfig(InspectContext context)
[27/03/2012 15:00:02] *** Error : Service MSSQL$MSDPM2010 is not installed. The SQL Server 2008 installation is not valid.Uninstall SQL Server 2008 and then run DPM Setup again.
[27/03/2012 15:00:02] Information : SQL Server service configuration is not correct.
[27/03/2012 15:00:02] Information : Detect if SQL Server is evaluation edition
[27/03/2012 15:00:02] Information : Check for existing database.
[27/03/2012 15:00:02] Information : Starting service
[27/03/2012 15:00:02] Data : Service name = MSSQL$MSDPM2010
[27/03/2012 15:00:02] * Exception : Expecting the following exception. Ignoring intentionally. => Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.ServiceNotFoundException: MSSQL$MSDPM2010 ---> System.InvalidOperationException: Service MSSQL$MSDPM2010 was not found on computer 'VMBACKUP'. ---> System.ComponentModel.Win32Exception: The specified service does not exist as an installed service
--- End of inner exception stack trace ---
at System.ServiceProcess.ServiceController.GenerateNames()
at System.ServiceProcess.ServiceController.get_ServiceName()
at System.ServiceProcess.ServiceController.GenerateStatus()
at System.ServiceProcess.ServiceController.get_Status()
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.StartService(String serviceName, String machineName, Boolean restart)
--- End of inner exception stack trace ---
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.CheckServiceStartError(String serviceName, InvalidOperationException invalidOperationException)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.StartService(String serviceName, String machineName, Boolean restart)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.StartSqlService(String instanceName, String sqlServerMachineName)
[27/03/2012 15:00:02] Information : Dpmdb does not exist on this system.
[27/03/2012 15:00:02] Information : Check if SQL Server 2008 Reporting Services is installed.
[27/03/2012 15:00:02] Information : Query WMI provider for path of configuration file for SQL Server 2008 Reporting Services. (Namespace : \\VMBACKUP\root\Microsoft\SqlServer\ReportServer\RS_MSDPM2010\v10\admin).
[27/03/2012 15:00:02] Information : Query for WMI class. (Query : SELECT * FROM MSReportServer_ConfigurationSetting WHERE InstanceName='MSDPM2010').
[27/03/2012 15:00:02] * Exception : => System.Management.ManagementException: Invalid namespace
at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
at System.Management.ManagementObjectSearcher.Initialize()
at System.Management.ManagementObjectSearcher.Get()
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetRosettaConfigFilePath(String sqlServerMachineName, String sqlInstanceName, ConnectionOptions connectionOptions)
[27/03/2012 15:00:02] * Exception : Expecting the following exception. Ignoring intentionally. => Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.ReportServerNotInstalledException: Report server is not installed ---> System.Management.ManagementException: Invalid namespace
at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
at System.Management.ManagementObjectSearcher.Initialize()
at System.Management.ManagementObjectSearcher.Get()
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetRosettaConfigFilePath(String sqlServerMachineName, String sqlInstanceName, ConnectionOptions connectionOptions)
--- End of inner exception stack trace ---
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetRosettaConfigFilePath(String sqlServerMachineName, String sqlInstanceName, ConnectionOptions connectionOptions)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectReportingPrerequisites.CheckSqlServerReportingServices(InspectContext context)
[27/03/2012 15:00:02] Information : SQL Server 2008 Reporting Services MSDPM2010 instance is not installed.
[27/03/2012 15:00:02] *** Error : Setup has detected that the installation of Reporting Services is not correctly configured or no instance of Reporting Services is linked to MSDPM2010 of SQL Server.1)To use the local dedicated MSDPM2010 instance with DPM, uninstall SQL Server and run setup again.
2)To use the option of installing DPM with an existing instance of SQL Server, make sure that the Reporting Services instance is also installed and linked correctly. For details, refer to DPM Setup Help.
[27/03/2012 15:00:02] Information : Check SQL Server 2008 Reporting Services report server service configuration.
[27/03/2012 15:00:02] Information : Query WMI provider for Service Details. (Namespace : \\VMBACKUP\root\cimv2).
[27/03/2012 15:00:02] Information : Query for WMI class. (Query : SELECT * FROM Win32_Service WHERE Name='ReportServer$MSDPM2010').
[27/03/2012 15:00:02] * Exception : Expecting the following exception. Ignoring intentionally. => Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.ServiceNotFoundException: ReportServer$MSDPM2010 : Service not found
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetServiceConfig(String serviceName, String machineName, ConnectionOptions wmiConnectionOptions)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectReportingPrerequisites.CheckRosettaServicesConfig(InspectContext context)
[27/03/2012 15:00:02] *** Error : Service ReportServer$MSDPM2010 is not installed. The SQL Server 2008 Reporting Services installation is not valid.Uninstall SQL Server 2008 Reporting Services and then run DPM Setup again.
[27/03/2012 15:00:02] Information : Report Server service configuration is not correct.
[27/03/2012 15:00:02] Information : End Inspect.
[27/03/2012 15:00:02] Information : **************************************************************************************
[27/03/2012 15:00:02] Information : Instantiating inspect component.
[27/03/2012 15:00:02] Data : Path of output xml = \PostInstallInspect.xml
[27/03/2012 15:00:03] Information : <<< Dialog >>> Inspect Page : Leaving
[27/03/2012 15:00:03] Information : <<< Dialog >>> User Information Page : Entering
[27/03/2012 15:00:03] Data : Purchased Client Agent Licenses = 0
[27/03/2012 15:00:03] Data : Purchased Standard Agent Licenses = 0
[27/03/2012 15:00:03] Data : Purchased Enterprise Agent Licenses = 0
[27/03/2012 15:00:09] Information : <<< Dialog >>> User Information Page : Leaving
[27/03/2012 15:00:09] Data : Purchased Client Agent Licenses = 0
[27/03/2012 15:00:09] Data : Purchased Standard Agent Licenses = 0
[27/03/2012 15:00:09] Data : Purchased Enterprise Agent Licenses = 0
[27/03/2012 15:00:09] Information : <<< Dialog >>> Install location Page : Entered
[27/03/2012 15:00:09] Information : Check if the media is removable
[27/03/2012 15:00:09] Data : Folder Path = C:\Program Files\Microsoft DPM
[27/03/2012 15:00:09] Data : Drive Name = C:\
[27/03/2012 15:00:09] Data : Drive Type = 3
[27/03/2012 15:00:09] Information : Check attributes of the directory
[27/03/2012 15:00:09] Data : Folder Path = C:\Program Files\Microsoft DPM
[27/03/2012 15:00:09] * Exception : Ignoring the following exception intentionally => System.IO.FileNotFoundException: Could not find file 'C:\Program Files\Microsoft DPM'.
File name: 'C:\Program Files\Microsoft DPM'
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.File.GetAttributes(String path)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
[27/03/2012 15:00:09] Information : Query free disk space
[27/03/2012 15:00:09] Data : Folder Path = C:\Program Files\Microsoft DPM
[27/03/2012 15:00:09] Data : Free Space = 2373
[27/03/2012 15:00:09] Information : Query free disk space
[27/03/2012 15:00:09] Data : Folder Path = C:\Windows\system32
[27/03/2012 15:00:09] Data : Free Space = 2373
[27/03/2012 15:00:09] Information : Check if the media is removable
[27/03/2012 15:00:09] Data : Folder Path = C:\Program Files\Microsoft DPM\DPM\DPMDB
[27/03/2012 15:00:09] Data : Drive Name = C:\
[27/03/2012 15:00:09] Data : Drive Type = 3
[27/03/2012 15:00:09] Information : Check attributes of the directory
[27/03/2012 15:00:09] Data : Folder Path = C:\Program Files\Microsoft DPM\DPM\DPMDB
[27/03/2012 15:00:09] * Exception : Ignoring the following exception intentionally => System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Microsoft DPM\DPM\DPMDB'.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.File.GetAttributes(String path)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
[27/03/2012 15:00:09] Information : Query free disk space
[27/03/2012 15:00:09] Data : Folder Path = C:\Program Files\Microsoft DPM\DPM\DPMDB
[27/03/2012 15:00:09] Data : Free Space = 2373
[27/03/2012 15:00:11] Information : Check if the media is removable
[27/03/2012 15:00:11] Data : Folder Path = C:\Program Files\Microsoft DPM
[27/03/2012 15:00:11] Data : Drive Name = C:\
[27/03/2012 15:00:11] Data : Drive Type = 3
[27/03/2012 15:00:11] Information : Check attributes of the directory
[27/03/2012 15:00:11] Data : Folder Path = C:\Program Files\Microsoft DPM
[27/03/2012 15:00:11] * Exception : Ignoring the following exception intentionally => System.IO.FileNotFoundException: Could not find file 'C:\Program Files\Microsoft DPM'.
File name: 'C:\Program Files\Microsoft DPM'
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.File.GetAttributes(String path)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
[27/03/2012 15:00:11] Information : Query free disk space
[27/03/2012 15:00:11] Data : Folder Path = C:\Program Files\Microsoft DPM
[27/03/2012 15:00:11] Data : Free Space = 2373
[27/03/2012 15:00:11] Information : Query free disk space
[27/03/2012 15:00:11] Data : Folder Path = C:\Windows\system32
[27/03/2012 15:00:11] Data : Free Space = 2373
[27/03/2012 15:00:17] Information : Check if the media is removable
[27/03/2012 15:00:17] Data : Folder Path = D:\Program Files\Microsoft DPM
[27/03/2012 15:00:17] Data : Drive Name = D:\
[27/03/2012 15:00:17] Data : Drive Type = 3
[27/03/2012 15:00:17] Information : Check attributes of the directory
[27/03/2012 15:00:17] Data : Folder Path = D:\Program Files\Microsoft DPM
[27/03/2012 15:00:17] Data : File Attributes = Directory
[27/03/2012 15:00:17] Information : Query free disk space
[27/03/2012 15:00:17] Data : Folder Path = D:\Program Files\Microsoft DPM
[27/03/2012 15:00:17] Data : Free Space = 786513
[27/03/2012 15:00:17] Information : Query free disk space
[27/03/2012 15:00:17] Data : Folder Path = C:\Windows\system32
[27/03/2012 15:00:17] Data : Free Space = 2373
[27/03/2012 15:00:18] Information : Check if the media is removable
[27/03/2012 15:00:18] Data : Folder Path = D:\Program Files\Microsoft DPM
[27/03/2012 15:00:18] Data : Drive Name = D:\
[27/03/2012 15:00:18] Data : Drive Type = 3
[27/03/2012 15:00:18] Information : Check attributes of the directory
[27/03/2012 15:00:18] Data : Folder Path = D:\Program Files\Microsoft DPM
[27/03/2012 15:00:18] Data : File Attributes = Directory
[27/03/2012 15:00:18] Information : Check if the media is removable
[27/03/2012 15:00:18] Data : Folder Path = C:\Program Files\Microsoft DPM\DPM\DPMDB
[27/03/2012 15:00:18] Data : Drive Name = C:\
[27/03/2012 15:00:18] Data : Drive Type = 3
[27/03/2012 15:00:18] Information : Check attributes of the directory
[27/03/2012 15:00:18] Data : Folder Path = C:\Program Files\Microsoft DPM\DPM\DPMDB
[27/03/2012 15:00:18] * Exception : Ignoring the following exception intentionally => System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Microsoft DPM\DPM\DPMDB'.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.File.GetAttributes(String path)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
[27/03/2012 15:00:18] Information : Check the filesystem on which DPM and prerequisites are installed
[27/03/2012 15:00:18] Information : D:\Program Files\Microsoft DPM
[27/03/2012 15:00:18] Information : C:\Windows\system32
[27/03/2012 15:00:18] Information : Query free disk space
[27/03/2012 15:00:18] Data : Folder Path = D:\Program Files\Microsoft DPM
[27/03/2012 15:00:18] Data : Free Space = 786513
[27/03/2012 15:00:18] Information : Query free disk space
[27/03/2012 15:00:18] Data : Folder Path = C:\Program Files\Microsoft DPM\DPM\DPMDB
[27/03/2012 15:00:18] Data : Free Space = 2373
[27/03/2012 15:00:18] Information : Query free disk space
[27/03/2012 15:00:18] Data : Folder Path = C:\Windows\system32
[27/03/2012 15:00:18] Data : Free Space = 2373
[27/03/2012 15:00:18] Data : Location of program files = D:\Program Files\Microsoft DPM
[27/03/2012 15:00:18] Data : Location of database files = C:\Program Files\Microsoft DPM\DPM\DPMDB
[27/03/2012 15:00:18] Information : <<< Dialog >>> Install location Page : Leaving
[27/03/2012 15:00:27] Data : Path of inspection output xml = C:\\DPMLogs\RemoteDbInspectReport.xml
[27/03/2012 15:00:27] Information : Instantiating inspect component.
[27/03/2012 15:00:27] Data : Path of output xml = C:\\DPMLogs\RemoteDbInspectReport.xml
[27/03/2012 15:00:27] Information : **************************************************************************************
[27/03/2012 15:00:27] Information : Start Inspect.
[27/03/2012 15:00:27] Information : Check if SQL Server 2008 is installed.
[27/03/2012 15:00:27] Information : Query WMI provider for SQL Server 2008. (Namespace : \\localhost\root\Microsoft\SqlServer\ComputerManagement10).
[27/03/2012 15:00:27] Information : Query for WMI class. (Query : Select * from SqlServiceAdvancedProperty where ServiceName='{0}' and PropertyName='Version').
[27/03/2012 15:00:28] Information : SQL Server 2008 DPM2010 instance is present on this system.
[27/03/2012 15:00:28] Information : Check if SQL Server 2008 SP1 is applied.
[27/03/2012 15:00:28] Information : Query WMI provider for SQL Server 2008 SP1. (Namespace : \\localhost\root\Microsoft\SqlServer\ComputerManagement10).
[27/03/2012 15:00:28] Information : Query for WMI class. (Query : Select * From SqlServiceAdvancedProperty Where ServiceName='MSSQL$DPM2010' AND PropertyName = 'SPLEVEL').
[27/03/2012 15:00:28] Information : Sql Server 2008 Service Pack Level is 3
[27/03/2012 15:00:28] Information : SQL Server 2008 SP1 is present on DPM2010 instance of this system.
[27/03/2012 15:00:28] Information : Check SQL Server Agent service configuration.
[27/03/2012 15:00:28] Data : SQL Server instance name = DPM2010
[27/03/2012 15:00:28] Information : Query WMI provider for Service Details. (Namespace : \\localhost\root\cimv2).
[27/03/2012 15:00:28] Information : Query for WMI class. (Query : SELECT * FROM Win32_Service WHERE Name='SQLAgent$DPM2010').
[27/03/2012 15:00:29] Data : Credentials of the service = MANAGEMENT\DPMSQLSvcsAcct
[27/03/2012 15:00:29] Information : SQL Server Agent service configuration is correct.
[27/03/2012 15:00:29] Information : Check SQL Server service configuration.
[27/03/2012 15:00:29] Data : SQL Server instance name = DPM2010
[27/03/2012 15:00:29] Information : Query WMI provider for Service Details. (Namespace : \\localhost\root\cimv2).
[27/03/2012 15:00:29] Information : Query for WMI class. (Query : SELECT * FROM Win32_Service WHERE Name='MSSQL$DPM2010').
[27/03/2012 15:00:29] Data : Credentials of the service = MANAGEMENT\DPMSQLSvcsAcct
[27/03/2012 15:00:29] Information : SQL Server service configuration is correct.
[27/03/2012 15:00:29] Information : Detect if SQL Server is evaluation edition
[27/03/2012 15:00:29] Information : Check the disk space for remote database.
[27/03/2012 15:00:29] Information : Remote Db disk space required : 900 MB disk space available = 786513 MB
[27/03/2012 15:00:29] Information : Check the Named Pipes protocol for remote database.
[27/03/2012 15:00:29] Information : Query WMI provider for Service Details. (Namespace : \\localhost\root\cimv2).
[27/03/2012 15:00:29] Information : Query for WMI class. (Query : SELECT * FROM Win32_Service WHERE Name='MSSQL$DPM2010').
[27/03/2012 15:00:29] Information : Check for existing database.
[27/03/2012 15:00:29] Information : Starting service
[27/03/2012 15:00:29] Data : Service name = MSSQL$DPM2010
[27/03/2012 15:00:29] Data : Current status of service = Running
[27/03/2012 15:00:29] Information : Service is already running
[27/03/2012 15:00:29] Data : Database connection string = Pooling = false;Integrated Security=SSPI;database=master;server=np:localhost\DPM2010
[27/03/2012 15:00:29] Information : Dpmdb does not exist on this system.
[27/03/2012 15:00:29] Information : DPM database DPMDB is missing or corrupt.If you are performing a clean installation of DPM, you must delete the DPM database before you run Setup. If you are upgrading or repairing an existing installation of DPM, you must restore a valid DPM database, and then proceed with Setup.
[27/03/2012 15:00:29] Information : Check whether the remote db msi has been installed.
[27/03/2012 15:00:29] Information : Check DPM Database Version.
[27/03/2012 15:00:29] Data : Database connection string = Pooling = false;Integrated Security=SSPI;database=DPMDB;server=localhost\DPM2010
[27/03/2012 15:00:29] * Exception : Expecting the following exception. Ignoring intentionally. => System.Data.SqlClient.SqlException: Cannot open database "DPMDB" requested by the login. The login failed.
Login failed for user 'MANAGEMENT\DPMSQLSvcsAcct'.
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.Internal.EnterpriseStorage.Dls.DB.SqlContext.Open()
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectDls.CheckDBVersion(InspectContext context)
[27/03/2012 15:00:29] Information : detectResult = DPMDBAbsent
[27/03/2012 15:00:29] *** Error : DPM Setup has detected that the DPM database files are missing from the selected instance of SQL Server 2008.Make sure that the correct database files are attached to the selected instance of SQL Server and then install DPM 2010 again.
[27/03/2012 15:00:29] Information : Checking if DPM db backup is needed.
[27/03/2012 15:00:29] Information : This is not upgrade path, so no DB Backup needed
[27/03/2012 15:00:29] Information : DPM DB Backup is not needed.
[27/03/2012 15:00:29] Information : Check if SQL Server 2008 Reporting Services is installed.
[27/03/2012 15:00:29] Information : Query WMI provider for path of configuration file for SQL Server 2008 Reporting Services. (Namespace : \\localhost\root\Microsoft\SqlServer\ReportServer\RS_DPM2010\v10\admin).
[27/03/2012 15:00:29] Information : Query for WMI class. (Query : SELECT * FROM MSReportServer_ConfigurationSetting WHERE InstanceName='DPM2010').
[27/03/2012 15:00:29] Data : Path of configuration file for SQL Server 2008 Reporting Services = D:\Program Files\Microsoft SQL Server\MSRS10.MSRS10\Reporting Services\ReportServer\RSReportServer.config
[27/03/2012 15:00:29] Information : Query WMI provider for instance linked to SQL Server 2008 Reporting Services. (Namespace : \\localhost\root\Microsoft\SqlServer\ReportServer\RS_DPM2010\v10\admin).
[27/03/2012 15:00:29] Information : Query for WMI class. (Query : SELECT * FROM MSReportServer_ConfigurationSetting WHERE InstanceName='DPM2010').
[27/03/2012 15:00:29] Data : Database server for SQL Server 2008 Reporting Services = VMBACKUP\DPM2010
[27/03/2012 15:00:29] Information : SQL Server 2008 Reporting Services DPM2010 instance is installed and linked to SQL Server VMBACKUP\DPM2010.
[27/03/2012 15:00:29] *** Error : Setup has detected that the installation of Reporting Services is not correctly configured or no instance of Reporting Services is linked to DPM2010 of SQL Server.1)To use the local dedicated DPM2010 instance with DPM, uninstall SQL Server and run setup again.
2)To use the option of installing DPM with an existing instance of SQL Server, make sure that the Reporting Services instance is also installed and linked correctly. For details, refer to DPM Setup Help.
[27/03/2012 15:00:29] Information : Check SQL Server 2008 Reporting Services report server service configuration.
[27/03/2012 15:00:29] Information : Query WMI provider for Service Details. (Namespace : \\localhost\root\cimv2).
[27/03/2012 15:00:29] Information : Query for WMI class. (Query : SELECT * FROM Win32_Service WHERE Name='ReportServer$DPM2010').
[27/03/2012 15:00:29] Data : Credentials of the service = MANAGEMENT\DPMSQLSvcsAcct
[27/03/2012 15:00:29] Information : Report Server service configuration is correct.
[27/03/2012 15:00:29] Information : Check Reporting SecureConnectionLevel.
[27/03/2012 15:00:29] Information : Getting the reporting secure connection level for localhost/DPM2010
[27/03/2012 15:00:29] Information : Setup detected that the Reporting SecureConnectionLevel is 0.
[27/03/2012 15:00:29] Information : End Inspect.
[27/03/2012 15:00:29] Information : ************************************************************************************** -
Portal Server installation software
Hi all,
I need to install EP 7.0(Portal server) in my machine.
Please tell me where can I get the required software from?
Thanks
Kukkuyou can install the trial version which works for 90 days from this link
https://www.sdn.sap.com/irj/sdn/downloads?rid=/webcontent/uuid/a62ad7fa-0a01-0010-3489-f3fc32658bd8
reward points if helpful -
Error while Starting Sun One Portal Server 6.0
Hi Everyone,
I am trying to install Sun One Portal Server 6.0 Installation. When I start the server (./amserver startall) , I am getting the following in the console
=========================
starting auth helpers ...
done.
checking for directory server ... directory server already running
done
starting web server ... iPlanet-WebServer-Enterprise/6.0SP10 B10/12/2005 00:16
warning: daemon is running as super-user
[LS ls1] http://test.myserver.com, port 80 ready to accept requests
java.lang.NoSuchMethodError: Service
unable to start
iPlanet-WebServer-Enterprise/6.0SP10 B10/12/2005 00:16
warning: daemon is running as super-user
[LS ls1] http://test.myserver.com, port 8089 ready to accept requests
java.lang.NoSuchMethodError: Service
unable to start
done.
=========================================================
When I check in the error log, I am getting the following error message
========================================================
[18/Jul/2008:13:14:42] info (11354): successful server startup
[18/Jul/2008:13:14:42] info (11354): iPlanet-WebServer-Enterprise/6.0SP10 B10/12/2005 00:16
[18/Jul/2008:13:14:42] info (11355): Installing a new configuration
[18/Jul/2008:13:14:42] info (11355): [LS ls1] http://test.myserver.com, port 80 ready to accept requests
[18/Jul/2008:13:14:42] info (11355): A new configuration was successfully installed
[18/Jul/2008:13:14:43] failure (11355): Internal error: Unable to find required methods in Java classes
[18/Jul/2008:13:14:43] failure (11355): Late initialization failed: Error running init function(late) NSServletLateInit: unknown error
=========================================================================
Can anybody tell me what could be issue?
Thanks in Advance.......This error is solved.However I don't know about the root cause. We tried using some LDAP server. Then this error get resolved.
Edited by: Jeya_14 on 31 Jul, 2008 9:09 AM -
Sun Java System Portal Server 6.0 FAQs
Sun Java System Portal Server 6.0 FAQs.
Author: Sanjeev Agarwal
Q. How to connect to external URLs from Sun ONE Portal Server? I want to use URL Scrapper for some of external sites/URLs.
Ans:
You can connect to external URLs if you have a Proxy Server running.
If you are using Web Server addition of Sun ONE the Portal Server then
go to /opt/SUNWam/servers/https-hostname.domainname/config/ dir
In the jvm12.conf file, enter the followings:
http.proxyHost=proxyservername.domainname
http.proxyPort=80 (or the appropriate proxy server port number)
https.proxyHost=proxyservername.domainname
https.proxyPort=80 (or the appropriate proxy server port number)
If you are using Sun ONE AppServer addition of Sun ONE Portal Server then
go to /var/opt/SUNWappserver/domains/domain1/<server-instance>/config dir
In the server.xml file, enter the followings:
<jvm-options>-Dhttp.proxyHost=proxyservername.domainname </jvm-options>
<jvm-options>-Dhttp.proxyPort=80 (or the appropriate proxy server port number) </jvm-options>
<jvm-options>-Dhttps.proxyHost=proxyservername.domainname </jvm-options>
<jvm-options>-Dhttps.proxyPort=80 (or the appropriate proxy server port number) </jvm-options>
After this modification restart the server.
Q. Explain all the processes (solaris 8 and S1 Portal Server 6.0) which runs when I start the Sun ONE Portal Server.
Ans.
These are the processes that a running Portal Server installation (Sun ONE WebServer addition, without SRAP) generally has by default.
1. Directory server processes:
- ns-slapd (LDAP server instance)
- uxwdog (admin server process) (parent process)
--- ns-httpd
----- ns-httpd
2. Auth Helper processes:
- doUnix
3. Web-Server/Identity-Server/Portal-Server processes:
As the Portal Server and Identity Server runs as web application on the Web Server, so they share the same JVM and processes.
- uxwdog (web server admin server process) (parent process)
--- ns-httpd
----- ns-httpd
(for each web server instance)
- uxwdog (parent process)
- ns-httpd
- ns-httpd
or (in case of MaxProc=n )
- uxwdog (parent process)
--- ns-httpd
----- ns-httpd
----- ns-httpd
----- n
Q. I have created a custom Provider but getting this error when I access the desktop, what do I do?
> error in the desktop.debug file:
> ERROR: DesktopServlet.handleException()
> java.util.MissingResourceException: Can't find bundle for base name CustomTabContainerProvider,
Ans:
It needs a resource bundle for the custom provider. You need to create a file CustomTabContainerProvider.properties (as mentioned in the error message) and put it into the /etc/opt/desktop/classes directory. If you are not using any properties defined in this resource file then it can be a empty file. Have a look on the properties files that bundled containerProviders uses in dir <portal-install-dir>/SUNWps/web-apps/https-<host.domain>/portal/WEB-INF/classes.
As you are extending JSPTabContainerProvider class, you can just copy the file JSPTabContainerProvider.properties from the above directory after renaming it to the <defined-provider-name>.properties (in your case CustomTabContainerProvider.properties) and move it into /etc/opt/desktop/classes directory.
Q. what is actually multiple instances of Portal Server means?
Ans:
Multiple instance of Portal Server means, you will have more http listeners for the same desktop contents and the same identity profiles stored in a single Directory Server which all the instances share.
In simple words you can have your Portal Server listening on different http ports, but uses same configuration, desktop and identities.
It can help you to share the load for Portal Server http requests. The alternate methods are to create more web server virtual server processes (maxProc=n, but in this case the listening port will be 1 only) or use some hardware load balancer.
You can achieve more from multiple instances if you have a multi level organization, you can change the look and feel of all the instances, images, services, components and can assign each instance to different organization or sub-organization.
Q. How do I check the availability of the Sun ONE Portal Server/Identity Server services.
Ans:
You can check the availability of Sun ONE Identity Server services from following urls.
http://<host.domainname>:<port>/amserver/sessionservice
http://<host.domainname>:<port>/amserver/loggingservice
To know the availability of components of Sun ONE Portal Server like Desktop/providers/Rewriter/Netmail you have to login into desktop. These are not services, but just the programming identities which will work if your Web Server and Identity Server is running.
Just go to URL http://<server>:<port>/portal/dt , if it shows up that means your portal server is fine, and these entities will work for sure.
Q. I am able to add the yahoo channels to existing users. But I am getting the weather for London not for local New Jersey. My language pref is to en|en_US and also the server is the default U.S server and not europe. How do I add the cities I want to see on weather channel?
Ans:
A Portal user himself (after login) can select what cities he want to see in weather channel.
Steps:
- click the edit button of weather channel
- click on the area you belong to from Available Sections
- select the cities from Available Cities select box and add them to Your Choices.
- click finished from select city page and then again click finished from select area page.
It will come back to the Portal Desktop and you will see all the cities you have selected in the weather channel.
Q. How to use getContent() method to use in custom jsp providers (developed by ourselves) so that it can be used to retrieve a jsp page. I have already placed the JSP file in the directory structure /etc/opt/SUNWps/desktop/default/channel_dir. But still the jsp is not being displayed.
Ans:
You don't have to do anything in the custom JSPProvider's getContent method except the call { return super.getContent(request,response); } . If all you want is just to show your jsp, then create a channel from the default JSPProvider, and edit the property contentPage of that channel from samplecontent.jsp to your jsp name, save the changes and login again. You should see your JSP.
Q. I want to remove all the buttons (help/edit etc.) from all the channels/one particular channel in my desktop?
Ans:
You can hide any buttons you want from any channel.
These steps show how to hide all the buttons.
1. Create a channel say "myNetlet" from netlet provider.
2. Set the channel title to "myNetlet"
3. Go to the dir /etc/opt/SUNWps/desktop/default/JSPTableContainerProvider and edit the file providerCommands.jsp, and modify the last line :
from :
<%=minMaximizeCommand%><%=helpCommand%><%=editCommand%><%=detachAtachCommand%><%=removeCommand%>
to:
<% if ( !(title.equals("myNetlet"))){ %><%=minMaximizeCommand%><%=helpCommand%><%=editCommand%><%=detachAtachCommand%><%=removeCommand%><% } %>
4. Clean the dir mentioned below which contains compiled JSPs. /var/opt/SUNWps/https-<host>.<domain>/portal/tmp/_jsps/_etc/_opt/_SUNWps/_desktop/_default_en/_JSPTableContainerProvider/_html and reload the page.
Relogin, and you would not see any buttons on "myNetlet" channel. You can customize this logic as per your needs.
Q. How to change the title of SampleJSP Channel. I tried to change the channel properties title value via iplanet directory Server Access Management GUI. But it is not getting reflected.
Ans:
Through Admin console you can change the channel property "title", and as soon as you refresh the page (Shift reload) of relogin in the portal it get's reflected.
The reason to this problem may be due to the channel property "title" is having "propagate" value as false and you are setting the channel title in the org level display profile not in the user level display profile.
So better you change the channel name in user's display profile also.
For this login into admin console and go to :
- View: "User Management" -> click on organization -> Show: Users
- click on the blue arrow of that user
- click on Edit in section Desktop (this will open a window)
- then change the channel properties same way you do for Organization display profile.
Q. Login Problem with SunOne Portal 6.0.
I was able to download and install sun one portal 6 on Solaris 8. The sample portal page came up after installation. However whenever I try to login to the Login channel with "amadmin" and the passphrase I used during installation, it takes me to another page - iPlanet/LDAP authentication page. Here I tried using the same login, but fails every time (the same login page appears). The url that shows is "http://<hostname>/amserver/login?module=dproadmin&goto=/amconsole/base/AMAdminFrame"
I tried registering myself as a new user as well. This too fails.
Ans:
Make sure you are giving fully qualifying the hostname in the url which invoked the desktop. This in fact is documented in the administration documentation. If the hostname is not fully-qualified, the login page goes into an endless mode. Again, the correct url is "http://<fully-qualified-hostname>/portal". Once you get to the desktop, the login and the new user registration works.
Q. How to send variables/parameters from 1 app to another app deployed on Sun ONE Portal Server? It may be the apps or different JSPs of JSP provider channel.
How to achieve inter channel communication in Sun ONE Portal Server?
Ans:
You can use servlet context object or session, or may be the request object itself to store the information from one channel and use that in another channel. The use of either of these 3 approaches may depend on your requirements. Using session, the information will be available to that user's channels only, using request, the information will be available for that user and that request only and by using ServletContext you can share the information across users and sessions. You can obtain DesktopServlet's ServletContext object inside JSP/JSPProvider.
Q. I am trying to modify the default desktop JSPs in TableContainerProvider and TabCotntainerProvider dirs, but it is not picking my modified JSPs ? what do I do?
Ans:
One easiest way to 100% ensure that it updates all your new jsp pages is to remove all the compiled jsps so that with next request the Sun ONE Portal Server compiles all the jsps and will make sure that your modification will be taken care of in next request.
Go to /var/opt/SUNWps/https-<instance_name>/portal/tmp/_jsp/_etc/_opt/_SUNWps/_desktop/_default_<locale>/ and remove everything. and access the Portal server, it will be little slow as it has to compile all the JSPs again. Here you will find directories in the name of Containers and Channels, so if you are modifying any particular Container/Channel you can just delete that only. This approach can help a lot during development time.
Q. What is the location of compiled JSPs in Sun ONE portal Server and what servlet spec does it supports?
Ans: The Portal server 6.0 runs on Sun ONE Web Server 6.0 sp2, which supports only jdk 1.3 and servlet spec 2.2 only. The Sun ONE Portal Server keeps the compiled jsps of desktop and channels in : /var/opt/SUNWps/https-<instance_name>/portal/tmp/_jsp/_etc/_opt/_SUNWps/_desktop/_default_<locale>/ dir as per the channels/container names.
Servlet 2.3 is supported if you run the Portal Server edition that runs on Sun ONE Application Server 7.0.
Q. How do I change jdk for Sun ONE Portal Server to another jdk? I want to change the JDK of only one of my Portal Server instances, is it possible? how?
Ans:
Yes you can achieve both.
A. To change the JDK for all the server instances:
Open <portal-install-dir>/SUNWam/servers/https-admserv/start-jvm file and modify the first line
NSES_JDK=/usr/java_1.3.1_04; export NSES_JDK
to
NSES_JDK=<your-jdk-location> ; export NSES_JDK
then open <portal-install-dir>/SUNWam/servers/https-<instance-name>/config/jvm12.conf file of all the server instances and add a line
jvm.option=-server after the first line
B. To change the JDK for a particular server instances:
Make a another copy of the start-jvm file rename it and modify the jdk location in it as mentioned above.
Open the start script from <portal-install-dir>/SUNWam/servers/https-<instance-name> dir and modify these lines :
if test -r {SERVER_ROOT}/https-admserv/start-*
then
for STARTSCRIPT in {SERVER_ROOT}/https-admserv/start-*
modify this to
if test -r {SERVER_ROOT}/https-admserv/<changed_name_of_start-jvm-file>
then
for STARTSCRIPT in {SERVER_ROOT}/https-admserv/<changed_name_of_start-jvm-file>
Note: As Portal Server 6.0 uses Web server 6.0 sp2, jdk 1.4 is not supported.
Q. How do I create a custom login page or a link, which will just log me into the portal server.
Ans:
You can create a custom page in your jsp page, just add this portion of html into your web page :
<FORM action="http://<server>:<port>/amserver/login?module=<login-module>&page=1" method=post name=login_form2 target=_top>
Login page using <login-module><br>
<P>Enter UserId<BR><INPUT name=TOKEN0 size=22></P>
<P>Enter Password<BR><INPUT name=TOKEN1 size=22 type=password></P>
<P><INPUT name=Submit type=submit value=Submit> </P>
</FORM>
The <login-module> can be LDAP or Unix or Membership which ever you have enabled. Or instead of this you can create a link. For example for LDAP auth module :
"<a href="http://<server>:<port>/amserver/login?module=LDAP&page=1&TOKEN0=user&TOKEN1=password" target=_top> Login into Portal </a>"
where user and password are the user credential for the portal server.
Q. Can I install a portal server pointing to another Identity server? I want to install few postal servers (on different machines) pointing to same identity server, is it possible?
Ans:
No, right now the Sun ONE Portal Server is tightly integrated with Sun ONE Identity Server so you can't just install only Sun ONE Portal Server and point it to another Sun ONE Identity Server. You can have a common Directory server if you want.
Q. I have an application which takes input in from anonymous user and then to complete the request the user than has to login. I am having problem in passing the taken input from anonymous page to logged in user. all the request parameters are lost when I log in. How do i get the request parameters after I log in
Ans:
You can create a custom login page and submit the form to "/amserver/login" with a hidden parameter "goto" through which you basically specify which url to go after you log in. So you can use this mechanism to create a query string with all your request parameters you want to pass after login. For example:
You can create a jsp which take few inputs from user and to complete the request you have to login so it posts the input form to a login jsp and stores the parameters taken from user in a hidden field (goto) :
<FORM action="/amserver/login?module=LDAP&page=1" method=post name=login_form2 target=_top>
Login page using LDAP<br>
<P>Enter UserId<BR><INPUT name=TOKEN0 size=22></P>
<P>Enter Password<BR><INPUT name=TOKEN1 size=22 type=password></P>
<INPUT TYPE=HIDDEN NAME="goto" VALUE="/portal/dt?param1=<%=request.getParameter("param1")%>¶m2=<%=request.getParameter("param2")%>">
<P><INPUT name=Submit type=submit value=Submit> </P>
</FORM>
After you login through this page both the param1 and param 2 will be available in the request object after you login and you can retrieve them in your application or jsp.
Q. I have few System.out.println in my jsp which i am using in my JSP provider channel, but when I look at the portal server's /var/opt/SUNWam/debug/desktop.debug file, none are there. I looked at the web server's access and error logs too, but it is not there also. Can somebody tell me how do it get those ? Do we have any other mechanism to put debug logs ?
Ans
By default the binary which web server runs is uxwdog which eats up System.out.println output. If you want to see the System.out.println then you need to change the product binary from the start script of the portal server instance.
- Go to <portal-install-dir>/SUNWam/servers/https-<instance-name> and open the start script
- Change the PRODUCT_BIN=uxwdog to PRODUCT_BIN=ns-httpd , save the file
- Run the script ./start to start the portal server
Note : with ns-httpd ON the server will not leave that shell, and in the same window/shell you will be able to see all your System.out.println statements. To close the server you have to kill the server process with "kill -9 pids" command
Alternate way is to use api inside your application or jsp:
<%@page import="com.sun.portal.providers.jsp.JSPProvider, com.sun.portal.providers.*, com.sun.portal.providers.containers.*, com.sun.portal.providers.context.*" %>
<% JSPProvider p=(JSPProvider)pageContext.getAttribute("JSPProvider");
ProviderContext pc = p.getProviderContext(); %>
<%-- after that you can use these lines any where in your jsp --%>
<%
pc.debugError("your error msg");
pc.debugMessage("your msg");
pc.debugWarning("your warning msg");
%>
The particular mgs will be shwon in /var/opt/SUNWam/debug/desktop.debug file as per your "debugLevel" parameter setting in /etc/opt/SUNWps/desktop/desktopconfig.properties file. By default the debugLevel is set to error so only pc.debugError("error msg") will be shown.
Q. Multipart form (file upload) processing in providers? Is it supported
Ans:
The Sun ONE Portal Server's DesktopServlet does not have the ability to process a request with the content encoding type of multipart/form-data. DesktopServlet does not pass the input stream for the request on to the Provider.
To accomplish handling of multipart/form-data type requests, it is necessary to create a companion servlet or JSP that process the multipart/form-data. This servlet can then pass control back to the Portal channel. The data from the file can be shared between the servlet and the provider by using static Java members or by storing the data in a back-end database and then passing a reference to the data over to the provider.
Q. After installing the Portal Server I am trying to login as admin, but it is failing and coming back to login page every time. How do I login?
Ans:
The Default Admin user is 'amadmin' and the password is the PASSPHRASE you give during Portal Server installation. Try login using these credentials.
Also in the browser give the complete URL for the Portal Server like : Http://<myhost>.<mydomain>:<port>/amserver/login or Http://<myhost>.<mydomain>:<port>/amconsole. You can't login into portal server's IDSAME console by giving IP Address or just the hostname, also your machine should be listed in the DNS server so that it can resolve the name.
Q. I installed Sun ONE Portal Server 6.0 some time back, and now I want to know all the installation parameters and user/passwords for whole portal installation. How do I do that?
Ans:
The Default Admin user is 'amadmin' and the password is the PASSPHRASE you give during Portal Server installation. Also in the browser give the complete URL for the Portal Server like : Http://<myhost>.<mydomain>:<port>/amserver/login or Http://<myhost>.<mydomain>:<port>/amconsole. You can't login into portal server's IDSAME console by giving IP Address or just the hostname, also your machine should be listed in the DNS server so that it can resolve the name.
In case you have forgotten the port numbers and PASSPHRASE that you give during installation, you still can see all the information for each component of your Portal Server Installation. The Portal server and it's components like Directory Server, Web Server and IDSAME are installed as Solaris package so the system has all the information for these packages.
Portal Server : See file /var/sadm/pkg/SUNWps/pkginfo
Directory Server : See files /var/sadm/pkg/SUNWamds/pkginfo and /var/sadm/pkg/SUNWamdsc/pkginfo
Web Server : See file /var/sadm/pkg/SUNWamws/pkginfo
Identity Server : See file /var/sadm/pkg/SUNWamsam/pkginfo
Note: In any case you should never edit/modify these files.
Q. Controlling the display of the help (?) button.
Where are the links/image elements defined for the help/edit/minimize buttons? the leafWrapper.jsp pulls the hashtable out of the HttpRequest, and that hashtable is being used by providerCommands.jsp:
Hashtable commands = (Hashtable)request.getAttribute("provider_cmds");
Any idea where this is being set?
Ans:
- You can remove the help/edit button of any channel by adding the line into the Channel's properties by editing the Xml of display profile in the admin console.
<String name="helpURL" value="" advanced="false" merge="replace" lock="false" propagate="true"/>
<Boolean name="isEditable" value="false" advanced="false" merge="replace" lock="false" propagate="true"/>
The Attribute 'provider_cmds' is set into /etc/opt/SUNWps/desktop/default/JSPTableContainerProvider/tablecolumn.jsp :
<dttable:getProviderCommand id="provider_cmds" scope="request" />, and after that only the leafwrapper.jsp is included, but the Hashtable is generated by a class com.sun.portal.providers.util.ProviderCommands.java and made available through taglib classes. So you can't change the generated contents/string in the Hashtable.
But you can change the default 'alt' text displayed and the images linked to the help/edit icons. As this modification is at Provider level, it will change the icons for all the channels in the desktop.
Please see the file:
/opt/SUNWps/web-apps/https-<host>.<domain>/portal/WEB-INF/classes/JSPTABLEContainerProvider.properties.
Here you will find the mapping. The image location are given from the context root of portal server which is by default : /opt/SUNWps/web-apps/https-<host>.<domain>/portal.
Q. I have a number of web applications needed to integrate to portal server. Any pointers or tips of what my option is?
Ans:
You can very well integrate all your web application with Portal server. Portal Server 6.0 has web container same as Sun ONE web server 6.0 Sp2, which runs on Jdk-1.3.
If your web applications are just Servlets/Jsps then you can very well port them on Portal server's webserver which supports war module deployment. (infect for Web server the Portal server and Identity server is like a war module.)
There can be two possibilities in this case, either you put the whole of your application on portal server and make the link available into the desktop via 'Application Provider Channels' or you can create a client to your web application into portal server.
If your web application is on Sun ONE Application server 7.0 and needs authentication, you can also have SSO. If you just want to show the link of your web application into desktop then you can either use URL Scrapper to show the first page of your web application or use Bookmark channel to provide just the url.
The easiest way to make a client of your web application is to use JSP Channel using JSPProvider and put your logic into the samplecontents.jsp file or you can create your own custom Provider extending JSPProvider. There can be a lot of different configurations, depending on the web application you want to integrate and your needs
Q. I removed few channels from the org level display profile but still they are coming to the desktop of users, I had accessed the desktop before. why?
Ans:
If you still see any channel after you remove it from the display profile at organization lever, that means you have to edit the user's display profile. So go to admin console and select User from Show: menu and click on the blue arrow near the user. In the right frame under the 'Desktop' category click on the Edit link (right side). This will open user's display profile in a window. Now edit it as per your requirements.Unfortunately Web Server 6.0SP2 is no longer available for download.
If you must use Web Server 6.0, you should use the most current Service Pack. It is backward compatible and contains many performance and security fixes. -
IPlanet Enterprise Web Server hosting a portal server
Has anyone tried to port the Plumtree portal server component to iPlanet Enterprise Web Server (aka SunONE Web Server, v6.0 or later)? Plumtree doesn't support this, but I am trying to merge a custom SSO authenticator to the Plumtree portal (v5.0.1).
I have this working great in security mode 0 (with SSL turned off), but I am having a difficult time getting past one last issue in security mode 2 (full SSL mode). I can get the portal server to run fine in mode 2 through Tomcat on the same machine, using the same certificate and JRE. I can also get iPlanet to run other servlet applications fine with SSL turned on. However, there appears to be either: (1) an incompatibility between iPlanet's NSServlet plug-in that handles servlets and the Plumtree framework classes that set up replies via SSL, or (2) a configuration error in my setup somewhere. I'm hoping that (2) is the real culprit, but I've tried just about everything I can think of, and haven't been able to resolve this problem.
The server starts up fine and I can load non-portal content without a problem. But when I log in, the portal's main community page that should be returned is not being returned to the client. PTSpy doesn't indicate any problems, so I know the content is being built by the portal correctly, but the built page is never being sent back to the requesting client.
Here is the error that gets logged to iPlanet's error log:
[29/Dec/2003:15:05:53] failure ( 2772): Internal error: Unexpected error condition thrown (unknown exception,no description), stack: java.lang.NoClassDefFoundError: javax/net/ssl/SSLSocket
at sun.net.www.http.HttpClient.parseHTTPHeader(HttpClient.java:793)
at sun.net.www.http.HttpClient.parseHTTP(HttpClient.java:702)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:583)
at java.net.URL.openStream(URL.java:960)
at org.apache.xerces.readers.DefaultReaderFactory.createReader(DefaultReaderFactory.java:149)
at org.apache.xerces.readers.DefaultEntityHandler.startReadingFromDocument(DefaultEntityHandler.java:493)
at org.apache.xerces.framework.XMLParser.parseSomeSetup(XMLParser.java:314)
at org.apache.xerces.framework.XMLParser.parse(XMLParser.java:1097)
at org.apache.xerces.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:195)
at javax.xml.parsers.DocumentBuilder.parse(DocumentBuilder.java:124)
at com.plumtree.openfoundation.xml.dom.XPBuilder.LoadDocumentFromURI(XPBuilder.java:203)
at com.plumtree.xpshared.jsutil.JSRegistry.LookupJSComponentVersions(JSRegistry.java:243)
at com.plumtree.xpshared.jsutil.JSRegistry.GetJSComponentVersions(JSRegistry.java:184)
at com.plumtree.xpshared.jsutil.JSRegistry.GetJSComponent(JSRegistry.java:465)
at com.plumtree.xpshared.jsutil.JSRegistry.GetJSComponent(JSRegistry.java:444)
at com.plumtree.uiinfrastructure.statichelpers.ConfigHelper.GetCommonJSIncludes(ConfigHelper.java:1330)
at com.plumtree.uiinfrastructure.form.AFormAS.DisplayCommonJavaScript(AFormAS.java:59)
at com.plumtree.portalpages.common.uiparts.PlumtreeAS.DisplayCommonJavaScript(PlumtreeAS.java:88)
at com.plumtree.portalpages.common.uiparts.PlumtreeDP.DisplayHead(PlumtreeDP.java:599)
at com.plumtree.portalpages.common.uiparts.PlumtreeDP.Display(PlumtreeDP.java:112)
at com.plumtree.portaluiinfrastructure.activityspace.Interpreter.ProcessDisplayPageOrRedirect(Interpreter.java:816)
at com.plumtree.portaluiinfrastructure.activityspace.Interpreter.HandleRequest(Interpreter.java:1589)
at com.plumtree.portaluiinfrastructure.activityspace.Interpreter.DoService(Interpreter.java:448)
at com.plumtree.uiinfrastructure.web.XPPage.service(XPPage.java:141)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.iplanet.server.http.servlet.NSServletRunner.invokeServletService(NSServletRunner.java:919)
at com.iplanet.server.http.servlet.WebApplication.service(WebApplication.java:1061)
at com.iplanet.server.http.servlet.NSServletRunner.ServiceWebApp(NSServletRunner.java:981)
It looks like a Java classpath issue, but I've verified (even in the same log file with java debugging turned on) that the SSLSocket class is getting loaded. I've even tried moving the specification of the jar file containing this class (jsse.jar, part of the JRE) to the beginning and end of my classpath setting.
I'm using the same JRE that is bundled with the Tomcat release supplied with my Plumtree 5.0.1 installation (1.4.1_02).
I've posted a similar message on a couple other forums (Java and iPlanet-related) and haven't found an answer yet. Does anyone have any ideas?
JohnIn case anyone else experiences this, I have apparently stumbled upon an issue with iPlanet's handling a specified JRE/JDK instead of the supplied JDK in iPlanet (SunONE) Web Server v6.0, SP5, though I found a way around it to resolve my problem.
I had been specifying a different JRE to run with through iPlanet's administrative server manager. However, even though I was specifying to load all the JRE's jar files in my classpath setting, iPlanet was only loading the rt.jar file for my specified JRE. With verbose logging turned on, the error log was indicating that the other classpath specified jar files were being loaded, but apparently they were not being used. The JDK that was released with iPlanet appears to be being used for all other JRE classes outside of those defined in rt.jar. Since the JDK supplied with the iPlanet release didn't contain jsse.jar, which contains SSL support, it was not being loaded and was causing the problem I was seeing.
Instead of specifying the JRE of a different JDK that I was using, I changed the global setting in the administrative server manager to override the entire JDK. This has resolved my problem.
So if you specify a JRE to override the iPlanet supplied JDK/JRE, it appears that only the rt.jar file of the specified JRE will be loaded, and the jar files associated with the iPlanet-supplied JRE will be used for all other classes. Specification of a complete JDK to override the supplied one will resolve this, and the portal server appears to work fine now in any security mode setting when hosted on iPlanet Web Server (SunONE), even though Plumtree doesn't support that as a host server application. -
Plumtree portal server (v5.0.1) hosted on iPlanet Web Server (v6.0)
Has anyone tried to port the Plumtree Corporate Portal v5.0.1 portal server component to iPlanet Enterprise Web Server 6.0 (aka SunONE Web Server, v6.0 )? Plumtree doesn't support this, but I am trying to merge a custom SSO authenticator to the Plumtree portal (v5.0.1). The authenticator runs as a plug-in to SunONE Web Server and has been in place on our customer's web site for a long time now.
I have this working great in with SSL turned off, but I am having a difficult time getting past an error when I turn on SSL. I can get the portal server to run fine with SSL turned on through Tomcat on the same machine, using the same certificate and JRE. I can also get the SunONE server to run other servlet applications fine with SSL turned on. However, there appears to be either: (1) an incompatibility between SunONE's NSServlet plug-in that handles servlets and the Plumtree framework classes that set up replies via SSL, or (2) a configuration error in my setup somewhere. I'm hoping that (2) is the real culprit, but I've tried just about everything I can think of, and haven't been able to resolve this problem.
The server starts up fine and I can load non-portal content without a problem. But when I log in, the portal's main community page that should be returned is not being returned to the client. PTSpy (a debugging aid for the Plumtree portal) doesn't indicate any problems, so I know the content is being built by the portal correctly, but the built page is never being sent back to the requesting client.
Here is the error that gets logged to my SunONE server's error log:
[29/Dec/2003:15:05:53] failure ( 2772): Internal error: Unexpected error condition thrown (unknown exception,no description), stack: java.lang.NoClassDefFoundError: javax/net/ssl/SSLSocket
at sun.net.www.http.HttpClient.parseHTTPHeader(HttpClient.java:793)
at sun.net.www.http.HttpClient.parseHTTP(HttpClient.java:702)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:583)
at java.net.URL.openStream(URL.java:960)
at org.apache.xerces.readers.DefaultReaderFactory.createReader(DefaultReaderFactory.java:149)
at org.apache.xerces.readers.DefaultEntityHandler.startReadingFromDocument(DefaultEntityHandler.java:493)
at org.apache.xerces.framework.XMLParser.parseSomeSetup(XMLParser.java:314)
at org.apache.xerces.framework.XMLParser.parse(XMLParser.java:1097)
at org.apache.xerces.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:195)
at javax.xml.parsers.DocumentBuilder.parse(DocumentBuilder.java:124)
at com.plumtree.openfoundation.xml.dom.XPBuilder.LoadDocumentFromURI(XPBuilder.java:203)
at com.plumtree.xpshared.jsutil.JSRegistry.LookupJSComponentVersions(JSRegistry.java:243)
at com.plumtree.xpshared.jsutil.JSRegistry.GetJSComponentVersions(JSRegistry.java:184)
at com.plumtree.xpshared.jsutil.JSRegistry.GetJSComponent(JSRegistry.java:465)
at com.plumtree.xpshared.jsutil.JSRegistry.GetJSComponent(JSRegistry.java:444)
at com.plumtree.uiinfrastructure.statichelpers.ConfigHelper.GetCommonJSIncludes(ConfigHelper.java:1330)
at com.plumtree.uiinfrastructure.form.AFormAS.DisplayCommonJavaScript(AFormAS.java:59)
at com.plumtree.portalpages.common.uiparts.PlumtreeAS.DisplayCommonJavaScript(PlumtreeAS.java:88)
at com.plumtree.portalpages.common.uiparts.PlumtreeDP.DisplayHead(PlumtreeDP.java:599)
at com.plumtree.portalpages.common.uiparts.PlumtreeDP.Display(PlumtreeDP.java:112)
at com.plumtree.portaluiinfrastructure.activityspace.Interpreter.ProcessDisplayPageOrRedirect(Interpreter.java:816)
at com.plumtree.portaluiinfrastructure.activityspace.Interpreter.HandleRequest(Interpreter.java:1589)
at com.plumtree.portaluiinfrastructure.activityspace.Interpreter.DoService(Interpreter.java:448)
at com.plumtree.uiinfrastructure.web.XPPage.service(XPPage.java:141)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.iplanet.server.http.servlet.NSServletRunner.invokeServletService(NSServletRunner.java:919)
at com.iplanet.server.http.servlet.WebApplication.service(WebApplication.java:1061)
at com.iplanet.server.http.servlet.NSServletRunner.ServiceWebApp(NSServletRunner.java:981)It looks like a Java classpath issue, but I've verified (even in the same log file with java debugging turned on) that the SSLSocket class is getting loaded. I've even tried moving the specification of the jar file containing this class (jsse.jar, part of the JRE) to the beginning and end of my classpath setting.
I'm using the same JRE that is bundled with the Tomcat release supplied with my Plumtree 5.0.1 installation (1.4.1_02). I can't get the JRE that came bundled with the SunONE v6.0 release to work at all.
I've posted a similar message on a couple other forums (Java and iPlanet-related, as well as on Plumtree's customer forum) and haven't found an answer yet. Does anyone have any ideas?In case anyone else experiences this, I have apparently stumbled upon an issue with iPlanet's handling a specified JRE/JDK instead of the supplied JDK in iPlanet Web Server v6.0, SP5, though I found a way around it to resolve my problem.
I had been specifying a different JRE to run with through the administrative server manager. However, even though I was specifying to load all the JRE's jar files in my classpath setting, iPlanet was only loading the rt.jar file for my specified JRE. With verbose logging turned on, the error log was indicating that the other classpath specified jar files were being loaded, but apparently they were not being used. The JDK that was released with iPlanet appears to be being used for all other JRE classes outside of those defined in rt.jar. Since the JDK supplied with the iPlanet release didn't contain jsse.jar, which contains SSL support, it was not being loaded and was causing the problem I was seeing.
Instead of specifying the JRE of a different JDK that I was using, I changed the global setting in the administrative server manager to override the entire JDK. This has resolved my problem.
So if you specify a JRE to override the iPlanet supplied JDK/JRE, it appears that only the rt.jar file of the specified JRE will be loaded, and the jar files associated with the iPlanet-supplied JRE will be used for all other classes. Specification of a complete JDK to override the supplied one will resolve this. -
Hi,
HW: Sun Solaris 2.8
I would really appreciate it you can cc: me if you can shed any light
as
to whats going wrong, and what I should do to fix the following
problem.
Portal server doesn't allow one to access /console (or /login) -
0 length document is returned.
We find the following in the enterprise server error log, when we
attempt
to access portal console (URI: http://....:8080/console)
1) Installed SP3.0sp3a as Open Portal, i.e without the gateway and
without
SSL enabled.
2) Our Unix users are served using YP
***From the server access logs : ***
- - [16/Nov/2001:15:12:40 -0800] "GET /login HTTP/1.0" 503 0
***From the server error logs : ***
[16/Nov/2001:14:11:27] info ( 4639): successful server startup
[16/Nov/2001:14:11:27] info ( 4639): iPlanet-WebServer-Enterprise/4.1SP7
BB1-04/05
/2001 18:30
[16/Nov/2001:14:11:28] info ( 4639): Loading Simple Session Manager by
default. Sp
ecify MMapSessionManager in servlets.properties to load persistent
session manager
[16/Nov/2001:14:11:28] info ( 4639): SimpleSessionManager: Default
values for maxi
mum number of sessions is 1000 with a time out value of 1800 seconds
[16/Nov/2001:14:11:28] info ( 4639): SimpleSessionManager: Maximum
number of sessi
ons (1000) with a time out value of (1800) seconds
[16/Nov/2001:14:12:40] info ( 4639): Internal Info: loading servlet
login
[16/Nov/2001:14:12:41] info ( 4639): Internal Info: loading servlet
pllservice
[16/Nov/2001:14:12:41] info ( 4639): pllservice: init
[16/Nov/2001:14:12:42] failure ( 4639): Internal error: exception thrown
from the
servlet service function (uri=/login): java.lang.NullPointerException,
stack: java
..lang.NullPointerException
at
com.iplanet.portalserver.auth.service.AuthD.printProfileAttrs(Compiled
Code)
at
com.iplanet.portalserver.auth.service.AuthD.<init>(AuthD.java:160)
at
com.iplanet.portalserver.auth.service.AuthD.getAuth(AuthD.java:171)
at
com.iplanet.portalserver.auth.service.LoginServlet.doGetPost(Compiled C
ode)
at
com.iplanet.portalserver.auth.service.LoginServlet.doGet(LoginServlet.j
ava:990)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:701)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:826)
at
com.netscape.server.http.servlet.NSServletRunner.Service(NSServletRunne
r.java:507)
, root cause:
Many thanks for your responses on this.
Tarang Kumar Patel. WWW home:http://ic-www.arc.nasa.gov/ic/
NASA Ames Research Center, MS 269-2, Moffett Field, CA 94035-1000
Email: [email protected], Tel:(650) 604-4721 fax: (650) 604
3594
Stated views are my own IDEA, as I'm another I.D.E.A man "I Didn't
Explain All"Just one more thing:
I made the following setting in platform.conf
ips.debug=on
Now, the trace I see on the STDOUT/STDERR stream reveals :
Received RequestSet XML : <?xml version="1.0" standalone="yes"?>
<RequestSet vers="1.0" svcid="profile" reqid="2">
<Request sid="qxcuekwwdrcfwubmmwuip82764q94o37r67n@[email protected]@8080@z
repvc"><![CDATA[<ProfileService ver="1.0" reqid="0"><GetProfile searchFlag="false"
admin="false"><Profile profileName="mercip/authentication" profileType="9"><Priv p
rivName="iwtSession-addSessionListenerOnAllSessions"/></Profile></GetProfile></Prof
ileService>]]></Request>
</RequestSet>
---->NEED TO FILL APPSHASH -----
getProfile.walktree
321^iwtSession-addSessionListenerOnAllSessions-pv
com.iplanet.portalserver.profile.service.ProfileServiceException: 321^iwtSession-ad
dSessionListenerOnAllSessions-pv
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Exception.java:42)
at com.iplanet.portalserver.profile.service.ProfileServiceException.<init>(
ProfileServiceException.java:47)
at com.iplanet.portalserver.profile.service.ProfileService.walkTree(Compile
d Code)
at com.iplanet.portalserver.profile.service.ProfileService.getProfile(Compi
led Code)
at com.iplanet.portalserver.profile.service.ProfileService.processProfileRe
quest(ProfileService.java:134)
at com.iplanet.portalserver.profile.service.ProfileService.processRequest(P
rofileService.java:123)
at com.iplanet.portalserver.profile.service.ProfileService.process(Compiled
Code)
at com.iplanet.portalserver.pll.server.PLLRequestServlet.handleRequest(PLLR
equestServlet.java:139)
at com.iplanet.portalserver.pll.server.PLLRequestServlet.doPost(Compiled Co
de)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:733)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:826)
at com.netscape.server.http.servlet.NSServletRunner.Service(NSServletRunner
.java:507)
ProfileResponse: exception key:321
ProfileResponse: exception string:iwtSession-addSessionListenerOnAllSessions-pv
ProfileResponse.toXMLString:method id is 0
Sent ResponseSet XML : <?xml version="1.0" standalone="yes"?>
<ResponseSet vers="1.0" svcid="profile" reqid="2">
<Response><![CDATA[<ProfileService vers="1.0" reqid="0"><Exception>321^iwtSession-a
ddSessionListenerOnAllSessions-pv</Exception></ProfileService>]]></Response>
</ResponseSet>
ProfileResponse: exception key:321
ProfileResponse: exception string:iwtSession-addSessionListenerOnAllSessions-pv
ProfileUtils.getProfileResponse: Response content <ProfileService vers="1.0" reqid=
"0"><Exception>321^iwtSession-addSessionListenerOnAllSessions-pv</Exception></Profi
leService>
Profile Error:
Invalid attribute or privilege name
com.iplanet.portalserver.session.SessionException: Invalid attribute or privilege n
ame
at java.lang.Throwable.fillInStackTrace(Native Method)
at com.iplanet.portalserver.session.SessionException.<init>(SessionExceptio
n.java:30)
at com.iplanet.portalserver.session.Session.addSessionListenerOnAllSessions
(Session.java:642)
at com.iplanet.portalserver.session.Session.addSessionListenerOnAllSessions
(Session.java:502)
at com.iplanet.portalserver.auth.service.AuthD.<init>(AuthD.java:112)
at com.iplanet.portalserver.auth.service.AuthD.getAuth(AuthD.java:171)
at com.iplanet.portalserver.auth.service.LoginServlet.doGetPost(Compiled Co
de)
at com.iplanet.portalserver.auth.service.LoginServlet.doGet(LoginServlet.ja
va:990)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:701)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:826)
at com.netscape.server.http.servlet.NSServletRunner.Service(NSServletRunner
.java:507)
Authd Profile Attributes
cookieDomains
cookieName->iPlanetPortalServer
authHost:authPort->........:8080
authProto->http
authHostIP->.....
authHostURL->http://.......:8080/login/default
Lets hope this helps
Maybe you are looking for
-
Hi, I have the Ipad 3 with IOS 6 and yesterday, suddenly, the apps and everything started working without touching the screen. Everything opens and closes immediately without stopping. I barely could turn it off. I finally reset it but still the same
-
Issue in FPCOPARA of FI .. please help
Hello all I am working as ABAP developer , on 4.6C system. We have developed a Print work bench form (PWB) through tcode EFRM , and we use it in FPCOPARA . In the END EXIT in PWB form , i m inserting a single record in Z table. Now, (1) When i run th
-
As title. Thank you guys for answering!
-
Hi Gurus, Im trying to change a G/L account '111111' to - Open Item management . Even though the account balance shows '0' , SAP throws error like "Account Balance = 0 , But open item exist in the Account ". Cheers Vivek.
-
Using BEx 7 Query in BEx 3.x Web Template
Hi Experts, I was wondering whether it is possible to use 7 Queries in 3.x Web Templates?! I would like to run the Templates without any EP installation but with the features of BEx 7 Query Designer. Is this possible? Thanks & Cheers Tobias