POS DM: missing customizing for Extracting Purchase Conditions

Hi there,
I am looking for an hint from a retail especialy POS DM specialist.
What I am doing is...
1. I am trying to supply DSO Objects...
   0RT_DS07 - Purchase Conditions at Purchasing Organization Level
   0RT_DS06 - Purchase Conditions at Site Level
...with purchasing conditions, via standard extractor programms...
   0RT_PURCHPRICE_PUORG_ATTR
   0RT_PURCHPRICE_PLANT_ATTR
2. I open the InfoPackage (e.g. INIT_0RT_PURCHPRICE_PLANT_ATTR_Purchase Prices at Store Leve) and enter selection criteria condition type = PB00, and start the data extraktion
3. the following error message will be raised, saying:
Diagnosis
     Condition type PB00 is not maintained in DM Customizing.
System Response
     If you wish to use this condition type in purchase price analysis, you
     must process the DM Customizing.
Procedure
     Use an allowed condition type or process this condition type in DM
     Customizing. To do this, you process view V_RDMT_P_COND_TY in
     transaction SM30 .
Procedure for System Administration
My Problem now is, that View mentioned to maintain condition type in DM Customizing V_RDMT_P_COND_TY does not exist. Neither can I find any similar sounding table or option SPRO to maintain the condition type.
Does anybody hase an idea how I can extrakt condition type PB00 for POS Data Management?
Thx a lot for your help
Michael

Look in LBWE under the "Purchasing" node. Then expand the 2LIS_02_ITM extractor until you get to the "events" node. Under that node you will see which events will trigger a record(s) sent to BI. To further your understanding look into 0STORNO and ROCANCEL data elements as well as 0RECORDMODE. Those InfoObjects and data elements will provide control flags for your updates as records come into BI from PUR. Within the help files for MM-PUR you will find a document explaining the usage of 0RECORDMODE and 0STORNO for record management.
Hopefully that will get you started

Similar Messages

Where can I find out what the rules are for extracting Purchase Orders?

Hi all,
Relating to BI 7.0, ECC 4.6
From a business perspective we are looking to be able to identify ALL the rules/criteria for Purchase Orders when they are extracted in ECC to BI.
The datasource is 2LIS_02_ITM
For example deleted PO items are not extracted to BI, nor where LOEKZ (Memory flag =X).
In brief there is criteria that identifies which PO items are extracted.
Where can I find out what ALL of these conditions for extraction are?
I have looked in the extractor program MCEX_BW_LO_API and there is a class for filling the a table but I cant see any criteria here to how it decides WHAT to extract i.e where in the code the criteria is set.
Also this of course could be set in customizing somewhere?
Anybody know where?
Thanks in advance.
Steve Jones

you can also check the start routines in BI for 2LIS ITM, there are a few exclusions and PO deletions there.
you can find more information in SAP Notes.
reagrds
Ramesh

BAPI for extraction sales price

Hi, friends:
are they BAPI for extract pricing conditions?
Thank you

this might help: BAPI_PRICES_CONDITIONS
or FM: PRICING
Re: BAPI for PRICING conditions

Extracting Purchase doucument Item condition value (Urgent)

Hi Gurus,
Currently, I am extracting purchase order item level data using 2lis_02_itm DS in which the extract structure is modified with fields which are fetching data from Condition Type (KSCHL), Condition Value (KWERT), etc., field at run time for which code is written in CMOD.
Now, user requirement is some what like this: they maintain KWERT for one of the condition type after a week/a month or 2 months (not fixed) of PO creation date.
Problem: In current extraction the data is comming for all the values changed or records added at item level (like material number, quantity, value, net value, etc.) but its not extracting the change in Condition Value (KWERT).
Please explain why?
Also, I tried to create a view based on the tables EKKO, EKPO and KONV but since KONV is pool table it's not allowing to create one.
Tried to create function module by changing standard function module RSAX_BIW_GET_DATA_SIMPLE_1 and passing an custom extract structure created with only few (required) fields. The problem with this one is that in OPEN CURSOR ..... area when I am trying to write select statement which contains INTO clause, its giving error while checking where as query is working when tested as a report output.
Also, pls. let me know weather any provision is available on extraction of Condition data for each item in a PO is available in SAP's standard DS or BC. The one like they have condition level DS for application area SD.
for any further details pls. let me know.
Thank You in advance.
Points will be awarded to satisfying answer.
Regards,

Good afternoon Joshi,
It is unfortunnatelly very normal that the changes of the conditions are not loaded into BI... When you enhanced a DS, all the fields you add are simply calculated for each line that are in the delta queue. Here the change of a condition is not recognize as a change for BI, so no record is created in the delta queue so you extra fields are not calculated...
The simplest way to check on which field a change is triggering a record in the delta queue is to check the fields in the extract structure in transaction LBWE for your datasource.
One solution might be to assign one of the sub-totals to that condition (if you already use the 6 available sub-totals I remember that there was a way to create some extra ones...)
If this does not work, to extract data from a pool table, you can always create in infoset query in transaction SQ01. To my knowledge there is no BC datasource for PO condition.
hope it helps,
Rodolphe
I do not think

How to do custom miro for import purchase ?

Hi All
I want to know what is the process for doing custom miro for import purchase, In my case for some of the excise elements we get credit, so while doing miro how to take care of this ?
Thanks Rashid.

Hi,
CVD Account has to be enter in Co cd setting and Excise default setting as per your Tax procedure if it isTAXINJ then JMOD as default excise value for CVD there fore system identifies the CVD as BED( Basic excise) which you can avail credit.
1.Basic customs duty (JCDB) 10% - Material cost
2.Education Cess on BCD(JEDB )-2% - Material cost
3.Secondary edu cess on BCD(JHCS )-1% - Material cost
4.CVD (JCV1)-- Credit
5.EDU CESS FOR cvd-2% - Credit
6.SHE Cess on CVD(J1CV )-1% - Credit
7.Add duty of customs(JADC) 4% - Credit
Cycle for Import PO
Import Purchase order: In PO you have to maintain the Custom duties
1Customs duty (JCDB) 10%
2Cess on BCD (JEDB)-2%
3Secondary edu cess on BCD (JHCS)-1%
4.CVD (JCV1)
5.EDU CESS FOR cvd-2%
6.SHE Cess on CVD(J1CV )-1%
7.Add duty of customs(JADC) 4%
You have to enter local custom vendor for above condition type in PO, One main or material vendor which you enter at the top of the PO
Then against the 7 condition types the customs (Local) vendor should be given (i-e) you have to select the condition type then click on the lens icon & give the customs vendor,
And should have zero tax code in PO
2 MIRO for Custom Vendor by selecting planned delivery cost.
3. Capture Excise Invoice against Commercial invoice (MIRO document no)- J1IEX
4. MIGO u2013Goods receipt
5. Post Excise Invoice- J1IEX
6. MIRO for Import Vendor
7. Final payment

Custom fields on Purchase order screen in SRM are missing.

Hi ALL,
SRM 5.0 R/3 4.6c
We have custom fields which appear on the create PO in SRM, the criteria for these fields to appear is if the item is of service type.So if its service item there will be additional/ custom fields for input purchase order screen in SRM,
But at this these fields dont show up for service item PO's . this is happening in Q and P environments while it is working fine in D and S. No changes were made to the system.
Also if I look in to bbp_pd info for the previous service PO, the data shows up in bbp_pd but the data or the custom fields are missing on the web.
We tried deactivating/activating the custom class in Q , but that did not help us!
Consider this as urgernt!
Can anyone please throw some light on this!
Thanks
Krishna

Have you implementated the BADI: BBP_CUF_BADI_2
if yes, then keep a break point there and see if you are missing any thing there...

Report missing point for purchases at Pacific Sales

Hi,
I forgot to give My Best Buy™ account to the sales asscociate for the purchase order. How to associate My Best Buy™ account with my purchase order at Pacific Sales within best buy store? I don't have the Customer Service Pin number on my receipt to add my missing points on Report Missing Points page, and I don't see the options for Pacific Sales or sales number.
Please let me know how I can attach my purchase order to My Best Buy™ account.
Thank you

Good morning dkz640, and welcome to the Best Buy forum,
If your My Best Buy account was not attached to your Pacific Sales purchase when it was processed, then points are unlikely to post on their own. In most cases you should be able to report a purchase as "missing" on BestBuy.com if it was not attached to your account; however, a purchase made from one of our Pacific Sales or Magnolia stores cannot be reported online, which means we may need to see if points can be added a different way.
I would like to go over your My Best Buy account with you to ensure it is up-to-date and to gather some additional information, so I will be sending you a private message. You can check your private messages by logging into the forum and clicking on the little yellow envelope located at the top of the page. I look forward to further speaking with you.
Thank you for posting and for being a My Best Buy member.
Derek|Social Media Specialist | Best Buy® Corporate
Private Message

Extract Purchasing organization for 0vendor

Hello Experts,
I am trying to extract the purchasing organization (EKORG) field for 0VENDOR using the standard extractor 0VENDOR_ATTR which gets data from the table LFA1. I am planning to pick this field from the LFM1 table. However, I am confused regarding one thing. In our organization, a vendor can be assigned to multiple purchasing organizations so when I use the condition to fetch EKORG when LFA1-LIFNR = LFMI-LIFNR, I may get multiple values. How should I go about this.
Thanks
Rishi

Hi Rishi,
As you said, if each vendor can be in more than one purchasing organization, you cannot load that attribute into 0VENDOR. What you need to do is create a new infoobject, compounding 0VENDOR and 0PURCH_ORG. But this will make sense if you want to load attributes of the vendor that depends on the purchasing organization or know for which purchase organizations a vendor works.
What do you need to do?
Hope this helps.
Regards,
Diego

FM or BAPI for creating purchase info records and purchase conditions

Hi all,
i need create purchase info records and purchase conditions from txt-file,
What FM or BAPI i can used for this?
Thanks and Regards,
Andrei

You can use trasaction SXDA_TOOLS.....
object type BUS3003
program type BINP
program/method RM06IBI0
but the fields must be sequentially written in the txt, with every space inclusive....

Printing Terms and Conditions for each Purchase order in the RDF output

Hi All,
Present i have an RDF report with the registered concurrent program. when i run this concurrent program i am getting the terms and conditions at the end of the purchase orders only once(for example 10 purchase orders). Now the requirement is to get this terms and conditions printed for each purchase order. The output is in PDF format. It's an 11i RDF report. Can any one suggest me the methods how to do this? Please give me reply as soon as possible.
Thankyou in advance
Regards,
Polimera

Hi, Polimera
Welcome to OTN
Present i have an RDF report with the registered concurrent program. when i run this concurrent program i am getting the terms and conditions at the end of the purchase orders only once(for example 10 purchase orders). Now the requirement is to get this terms and conditions printed for each purchase order. The output is in PDF format. It's an 11i RDF report. Can any one suggest me the methods how to do this? Please give me reply as soon as possible.
Take a fixed frame inside the purchase order master repeating frame and place your terms and condition inside the fixed frame.
Hope this helps
If someone response is helpful or correct, please mark is accordingly

Extractor for Purchasing Conditions for tables EKKO, EKPO and KONV

Hi Experts,
I want to know if there is an Extractor for Purchasing Conditions with fields in tables of Origin: EKKO, EKPO and KONV.
Or, at least an extractor with the table KONV.
Or, how I can look for it.
Any feedback, will be really apreciated.
Thanks in advance

Hi David,
Adding to what said above.
Observe the Fileds in the Datasources and the details.
http://help.sap.com/saphelp_nw2004s/helpdata/en/5c/8ea0e626e442efb109232830faded9/frameset.htm
Regards,
Ram.

How to bill the Government for the purchases made by Customer

Currently client is implementing Oracle applications
Requirement is for every general customer(Citizen) of the client, government is paying the amount for the purchases made(sales orders).
Please let me know how to implement the above scenario.
Can this be acheived by preparing a price list in specific to Government and use the billing address for the customer as Government agency address.
Regards
Sri

The other option would be to have 2 different parties.. One for customer and one for Government.. Then create a "Bill_to" account relationship between the two.

Missing Customizing settings for software component ECC-DIMP

Hi all,
While running the T-code IE4n I am getting this error:
Missing Customizing settings for software component ECC-DIMP
This is working fine in IDES ECC 6.0 ,Could u please tell me how to resolve it for my othersystems.
Thanks
Yinyan Lu

Dear Yinyan Lu,
Please, have a look into the SAP note 767108 (IE4N: Problems due to missing notification Customizing)
Solution
To correct this error, implement the correction instructions contained
in this note or import the relevant Support Package.
In packages
o DI in Release 4.6C2
o DIMP in Release 4.71 and higher
o EA-APPL as of Release 4.7 Extension Set 2 and higher
notifications are created when installing and dismantling. In this case,
Customizing must be complete, otherwise errors will occur.
In DI Release 4.6C2 and DIMP Release 4.71 (and higher),
follow the following Customizing path:
Plant Maintenance and Customer Service
 -> Maintenance and Service Processing
 -> Maintenance and Service Notifications
 -> Determine Properties of Notifications for Installing and
Dismantling Parts
Always maintain the notification type for installation and for
dismantling.
Follow the following Customizing path on EA-APPL as of Release 4.7
Extension Set 2 (and higher):
follow the following Customizing path:
Plant Maintenance and Customer Service
 -> Maintenance and Service Processing
 -> Configuration Control
 - > Determine Properties of Notifications for Installing and
 Dismantling Parts.
Always maintain the notification type for installation and for
dismantling.
What must you do if you do not want to use notifications in IE4N?
1. You must always maintain the notification type in accordance with
 Customizing described above.
2. Create an individual, empty implementation for the BADI
 BADI_CCM_NOTIF_GENER. To do this, proceed as follows:
a) Execute transaction SE18.
b) Specify BADI_CCM_NOTIF_GENER as the BADI name.
c) Use the menu <Implementation><create> to create an individual
 implementation with a corresponding name in the Z namespace.
d) You enter the BADI Builder. Name the implementation, and then
 save and activate your implementation. It is important that the
 methods CREATE, FILL_CUST_DATA, MODIFY, SET_HEADER_MESSAGE, and
 PRINT_NOTIF are empty.
Note that these steps are required, since the BADI
 BADI_CCM_NOTIF_GENER is equipped with a default source code that
 includes the use of the notification.
As of ECC600, Note 1368876 replaces error message IEN 126 with error
message IEN 026, which is more precise.
Caution:
o The error message mentioned above indicates that Customizing is
 missing. To correct the problem, you must perform the relevant
 Customizing settings for transaction IE4N.
o As of ECC600, you do not have to activate the DIMP switch (this
 may not be useful).
o For more information, see Note 1368876.
I hope, it helps.
Best regards,
Roland

How to extract TEXT for archived Purchase Orders ?

Hi Friends,
Can any one tell me how to extract TEXT for archived Purchase Orders ?
I have used READ_TEXT but that is not fetching texts for archived PO's. Whenever I am trying to fetch data from STXH against archived PO, no value is coming and resulting SY_SUBRC <> 0.
Any demo code will be highly appreciated.
Thanks in advance..
Sivaji

Hi,
You can see that table STXH is linked to archiving object MM_EKKO (you can see it in tcode DB15).
My suggest is that you must get the data. See the demo object BC_SBOOK in tcode AOBJ. You can see the report to reload data. The object is get the data in an internal table. So for report SBOOKR you can see this function module:
* get data records from the data container
* SBOOK
 CALL FUNCTION 'ARCHIVE_GET_TABLE'
 EXPORTING
 archive_handle = lv_handle
 record_structure = 'SBOOK'
 all_records_of_object = 'X'
 TABLES
 table = lt_sbook_tmp
 EXCEPTIONS
 end_of_object = 0. "not entries of this type
* check lt_sbook_tmp entries against selections. Delete not
* requested entries
 LOOP AT lt_sbook_tmp ASSIGNING <ls_sbook>
 WHERE carrid IN s_carrid
 AND connid IN s_connid
 AND fldate IN s_fldate.
 APPEND <ls_sbook> TO lt_sbook.
 ENDLOOP.
 REFRESH lt_sbook_tmp.
The idea is that you get the same data that you handle in READ_TEXT (because you don't have the data in database) and recovery the text.
I hope this helps you
REgards
Eduardo

POS DM: missing customizing for Extracting Purchase Conditions

Similar Messages

Maybe you are looking for