Posible to start a report without a button, only i Select List ???

Hi,
another problem :)
I have i lot of select lists in my aplication and the selectet items in the list are the values for my report. The problem is that i create a button for the select lists and when i click on the button the report was filled. Is there a option to start filling the report without the button ? I select the item in the list and now the report was filled with the values ? After the first select list i check the second. Select a value and the report is updated ?
i hope someone understand my tricky question ^^"
regards,
Taki

Create a lov
Create a select item with submit referencing the same page
Use the select with submit bindvariable as a bindvariable in the reportquery
So when you select an item in the list, say the list has 4 values (1-4), eg. you select 2 in the selectlist with submit, the page redirects to itself putting the value 2 in the binvariable (the selectlist with submit), in the reportquery you refernce to the bindvariable in the where clause. Which contains the value 2. There are probably much more advanced ways to do this. Just started out myself. All the best. If it still isn't clear I give an even more thorough explination. Good luck.
Message was edited by:
Rik

Similar Messages

How do you start a function without a button?

I currently have an action that starts with a button click. But I want it to start on frame 1 automatically without a button. How do I need to edit my code to make this work correctly? It's a typewriter effect and I plan on exporting it out as a .MOV and importing it into Adobe Premiere. I also need to figure out how to get the background transparent if possible. Thanks in advance!
Here is what I have.
Button to start the action
btn.onRelease = function()
    txt_ani.startTypeEffect();
Typewriter function
typewriter effect
// clear the string
//txt.text = "";
// stop the page
stop();
// the text string
// use \n for line breaks
var _txt:String = "“This is the text that will start after you press the button, but hopefully it will start automatically soon”";
var _tmr:Number; // timer
var _sec:Number = 62; // milliseconds till next letter
var i:Number = 1;
var l:Number = _txt.length;
function TypeEffect() : Void
    if( i < l )
        txt.text = _txt.substr( 0, i );
        i++;
    } else {
        txt.text = _txt;
        clearInterval( _tmr );
        trace("\t< FIN >");
    //trace( i );
// call this function to start:
function startTypeEffect() : Void
    trace("\t< START >");
    _tmr = setInterval( TypeEffect, _sec );

My movie has 1 frame. I deleted the layer that had the button, so I have an AS layer with the following code in it.
txt_ani.startTypeEffect();
And a layer below it with my movie clip with the Function code on one layer and the text in another layer below it.
When I do play it, nothing happens. But when I add some frames to the movie, it starts after a delay, but I keep seeing "START" in my output tab due to the Trace I have, which makes the text appear very quickly. I think I may need some code to stop it from restarting.
Where should this code you provided be put? And do I need additional code to have the text not speed up?

$x_Hide/Show/Toggle works on a button, how about select list or tabs

** After looking at the issue for days I think everyone must know what I am trying to do and a Carl pointed out they don't so here is the Readers Digest Condensed version.
I want have a single page that displays or hides regions depending on what the user want to do. So there is a single region that provides summary data and multiple regions for updates or reports that only show when that option is selected. I have got it working with buttons, thanks to Carl for his examples and numerous posts.
Now the powers that be see that as too much clutter on the screen and want a select list for the options, as there may be 10 or 12 options on a single "page." Hopefully this clarifies what I am trying to do.
I don't see anyway for it to work on tabs, at least not the tab sets in ApEx but select list have a "Display As" option for "Select List Returning URL redirect."
This sounds like the button "Optional URL Redirect" property. I have the code working on buttons on the same page so I added a select list and tried it.
The #REGION_STATIC_ID# is set up on the template of the region type being used and the regions hide and show as expected with the buttons.
So I set up an item on the page as a "Select List Returning URL redirect"
I created a static select list as:
STATIC2:Option1;javascript:$x_Hide('REGION1');$x_Hide('REGION2');$x_Show('REGION3')
I tried it with single quotes around the returning URL, and got
mod_plsql: /pls/htmldb/'javascript:$x_Hide('COBORROWER');$x_Hide('PROPERTY');$x_Show('BORROWER')' HTTP-400 Name "'javascript:$x_Hide('COBORROWER');$x_Hide('PROPERTY');$x_Show('BORROWER')'" is longer than 30 chars
without single quotes and got
New, blank screen with REGION3
mod_plsql: /pls/htmldb/'javascript:$x_Hide('REGION1');$x_Hide('REGION2');$x_Show('REGION3')' HTTP-400 Name "'javascript:$x_Hide('REGION1');$x_Hide('REGION2');$x_Show('REGION3')'" is longer than 30 chars
I took out the java stuff and put www.yahoo.com and got
Not Found
The requested URL /pls/htmldb/WWW.YAHOO.COM was not found on this server.
So the URL is being appended to the /pls/htmldb...
Hmm... I also removed "javascript:" and tried with and without single quotes... no luck... still appending the returning URL to /pls/htmldb/.
Tabs would be best but a drop down list is cleaner than 8 buttons.
Ideas? Spare change?
I may need it :)
Sam
Message was edited by:
slavanaway
Message clarified by:
slavanaway

What a difference a day and a pointer make.
I created a test function in the page html header
<script type="text/javascript">
function test(){
window.alert('Function test');
</script>
Changed the static list to
static2:Option1;javascript:test(),Option2;javascript:test()
and the function worked. I then changed the function to
<script type="text/javascript">
function test(){
$x_Toggle('REGION1');
</script>
and the region toggled on and off.
I then changed the select list to
static2:Option1;javascript:test(),Option2;javascript:$x_Toggle('REGION2')
and region1 toggled while Option 2 produced a blank browser page with the "REGION2" in the upper left hand corner.
I made functions for Option1, 2 and 3 with the appropriate $x_Hide/Show for each region and the select list now acts like the buttons.
Thanks for the help. I guess the call has an issue with the functions that are not on the page or ???. Maybe Carl can help, but since I needed more complex functions anyway this does not represent any more work while allowing me the option of a single page with multiple forms and reducing the complexity of the UI.
Score...

3 buttons and 2 select lists in a single line

Hi,
I have an application which has 3 region buttons ( say, b_1, b_2, b_3) and 2 selects lists (say, sl_1, sl_2). I want to display all the five buttons and items in a single line in the following order:
b_1 b_2 sl_1 b_3 sl_2
I have set Begin on new line = no
and Begin on new field = no, for both the two select lists.
But it does not seem to work.
Do anyone have any idea, how to sort out this issue?
A quick reply would really be appreciated.
Regards,
AM

Hi Vikas,
Please have a look into the application at
http://apex.oracle.com/pls/otn/f?p=34363:1:6206621111100168:::::
I have created two select lists P1_X and P1_Y. These items are hidden on page load event. When the associated button is clicked the list should appear on the page.
Written the following code in 'Pre element text' for each of the items:
P1_X :: <input type="button" value="X" onclick="f_X();" class="t17Button" />
P1_Y:: <input type="button" value="Y" onclick="f_Y();" class="t17Button" />
Where, f_X() and f_Y() are displaying the select lists.
As you can see, the select lists are appearing just below the html buttons, which I want side by side with the buttons.
Could you please figure out the issue?
If you want I can share my login details.
Regards,
AM

How to Print a interactive report without action button and search bar

Hello every one....
I am working on printing an interactive report. If there are 20 columns in that report i need to select some columns for printing. For this purpose i used actions button which is in the search bar of the interactive report. But i do not want to get that Actions button and search bar to get printed in the printing page. Can any one give a solution to sort out my problem
Thanks
Manoj.

>
Welcome to the forum: please read the FAQ and forum sticky threads (if you haven't done so already), and ensure you have updated with your profile with a real handle instead of "886412".
You'll get a faster, more effective response to your questions by including as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB version and edition
<li>Web server architecture (EPG, OHS or APEX listener)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s)
I am working on printing an interactive report. If there are 20 columns in that report i need to select some columns for printing. For this purpose i used actions button which is in the search bar of the interactive report. But i do not want to get that Actions button and search bar to get printed in the printing page. Can any one give a solution to sort out my problemSee +{message:id=2475831}+
Always search the forum thoroughly before posting a question: 98% of questions (like this one) have been answered before.

How can I just display the selected value of a listbox in a report without the reverse display and selection buttons?

I am using a table which contains a text field with a lookup. I want to use the selected value of this field in a form which is acting as a selection form. No editing of the field's value is permitted. How do I just display the value of the field (which
is considered a listbox on the form) without the reverse display and the up and down selection buttons.
I can provide an illustration of the condition I am trying to overcome, but this system doesn't accept it.
Thank you for any suggestions or clarification you can provide.
Marj Weir

Thank you. I'll try that approach.
I found, after much experimentation, on a similar problem involving a multiselect lookup field, that if I make the field invisible, and add a textbox that displays the fieldname plus .column(0), it displays all the selected entries.
E.g.: staff.Column(0)
Staff is the field containing the last names of selected staff members.
staff.Value only shows the first name in the lookup list whether it is checked or not, so this is useless.
staff.column(0), however, (inexplicably) shows all the selected names, e.g. Jones, Smith, Wiggins.
Marj Weir

Report -- filter with selection list -- show all values after select page

Hello!
I have the following problem:
- I have a report
- this report can be filtered with a selection-list
- the selection list is based on dynamic LOV and has a null-value
- I added the code of the report the following, to filter the report after choosing a value of the selection list:
... and (instr(type, decode(:P8_FILTER_type, '%null%',type,:P8_FILTER_type)) > 0)
This works very well.
But my problem is: When the user logs out and the next time, he logs in, the selection list shows " --- show all values --- " (my null-display-value) and the report is empty "no values found".
---> I want to show the first time, the page is selected ALL the values of the report. (this is now only possile if I press the button which belongs to the selection list)
I hope, somebody understands my problem.
Thank you so much,
LISA

Hello Lisa,
The first time it's probably NULL.
So what you can do in your where: (instr(type, decode(NVL(:P8_FILTER_type,'%null%'), '%null%',type,:P8_FILTER_type)) > 0)
Off topic: I also wonder if that where clause can't be simpler? Do you rely need the instr?
Regards,
Dimitri
http://dgielis.blogspot.com/
http://www.apex-evangelists.com/
http://www.apexblogs.info/

Dynamic Select List in Reports

Hi,
I have come across solutions to implement dynamic Select Lists. But can the same be implemented in a report.
I have a report of 2 columns which are select lists. The Value of one depends of the other.
Can this be done?
Thanks in Advance

Hi Abdullah,
Thanks for the Tip. However, couple of queries.
1) The first modification involves changing the query to : select lov_pkg.savekey() , colA, colB, ... But the function savekey takes a value.
Ideally, I need this function to be called while loading and when the first select list is changed. How can this be done.
2) Also, To make this change in query, I had to use (Use Generic Column Names (parse query at runtime only)) option. Now my Add Row button doesnt work? Can you tell me how that can be customized.
Thanks,
Sunil

Is it possible to change values in pagination select list for a report?

The values showing up in my pagination select list for a report are 10,15,20,30,50,100,200,500,1000,5000.
Is it possible to not have this list show the 1000 and 5000 values? I've tried setting various row values in the layout and pagination section of the report, but nothing changes in the select list. Is there a way to change this, or is it set up in a template somewhere that I can change?
APEX version 3.0
Thanks

Figured this one out. Using the P1_ROWS item, added a static LOV with the correct values to override the one APEX was providing. The P1_ROWS item goes in the Number of Rows (Item) field in the layout and pagination section of the report.

Reset Select List in Form With Report

Hi,
i have Created Form with Report Page. I have three select List on this page.
1-Market Name Select List with Redirect
2-Customer Name Select List with Redirect
3-Contect Person
when i select market Name then Respective Customer name is select In to select List Customer Name.
When i select Customer Name Then Contact Person is Select in Select List Contect Person.
Problem is when i select Customer Name from Select List then Contact Person comes into Contact persion Select List But the value in select List Customer Name and Market Name is not dispaly , Display Only -Select Market - and -Select Customer Name- .
I want when i select Customer NAme From Select List then value from MArket and customer Select List should not be reset.
How can i do this.
Thanks
Edited by: 805629 on Jan 26, 2011 10:45 PM

Try 'select list with submit', not "select list with redirect". Redirect usually doesn't save the values in session state so they are lost when the page repaints.

Start BI Publisher Report without authentication

Hello
I'd like to start BI Publisher Reports from Apex using a simple URL but without having to login into BI Publisher. Is there a way to provide username/password in the URL ( like with Oracle Reports cgi) or another possibility avoiding to type in Publisher credentials?
I know there is a technique to start Publisher Reports from Apex using a webservice, but with this it isn't possible to show the output on screen.
Thank you
Norbert

Thank you Turribeach.
I tried the guest folder as we don't use SSO. Anyway I can't get it to work... maybe I got a wrong value for Guest Folder Name? The report lies in Shared Folders/Guest. If I use "Guest" for Guest Folder Name I receive the error "The report cannot be rendered because of an error, please contact the administrator.". If I start the report out of BIP it works fine. Any other setting of Guest Folder Name, i.e. "/Guest" or "/Shared Folder/Guest" will bring up the credentials dialog and after loggin in the report is displayed ok.
Any suggentions what's wrong or missing?

Start SAP BW Query Designer button in Crystall Report is not find

Hi all
I installed Crystal Report 2008 SP1 and Integration Kit for SAP 3.1
After Integration Kit installed, I see in SAP Menu have Start SAP BW Query Designer button
But, when I update to Crystal Report SP2, I dont find Start SAP BW Query Designer button in SAP Menu
Can I help me enable Start SAP BW Query Designer button
Thanks

Hi,
the query designer can be started from the SAP BusinessExplorer menu items. the button has been removed from Crystal Reports
Ingo

X200 in Hibernate Mode, it starts up automatically without pressing on the power up button....

X200
Dear all,
When my X200 is in Hibernate Mode, it starts up automatically without pressing on the power up button....
I installed Win Xp on it. All my drivers are installed.
I swichted of the Power on Lan in the Bios, but still no difference.
When I turn off my computer completely, I doesn't start up from himself. So it's only in hibernate mode.
Does anyone has an idea what it coud be?
Thanks a lot for your support.

Take it right back and Apple will likely exchange it for another rather than have you demand your money back.
This time, check to see if you have a lemon first before leaving.
It's rare, but it does happen, sorry it happened to you.

ALV Tree Report without using ABAP Objects

Hi all,
I want to know the name of a function module to create ALV Tree in SE38 as a report. I am required to create this ALV Tree Report without using ABAP OBJECTS. Can u pls help me as early as possible.

Hi
see this link
http://www.sapdev.co.uk/reporting/alv/alvtree.htm
*& Report ZBCALV_TREE
REPORT ZBCALV_TREE.
class cl_gui_column_tree definition load.
class cl_gui_cfw definition load.
data tree1 type ref to cl_gui_alv_tree.
data mr_toolbar type ref to cl_gui_toolbar.
include <icon>.
include bcalv_toolbar_event_receiver.
include bcalv_tree_event_receiver.
data: toolbar_event_receiver type ref to lcl_toolbar_event_receiver.
data: gt_VBAK type VBAK occurs 0,      "Output-Table
      gt_fieldcatalog type lvc_t_fcat, "Fieldcatalog
      ok_code like sy-ucomm.           "OK-Code
start-of-selection.
end-of-selection.
call screen 100.
*&      Module STATUS_0100 OUTPUT
      text
module STATUS_0100 output.
SET PF-STATUS 'MAIN'.
if tree1 is initial.
    perform Zinit_tree.
endif.
call method cl_gui_cfw=>flush.
endmodule.                 " STATUS_0100 OUTPUT
*&      Form Zinit_tree
      text
--> p1        text
<-- p2        text
form Zinit_tree .
perform Zbuild_fieldcatalog.
create container for alv-tree
data: l_tree_container_name(30) type c,
        l_custom_container type ref to cl_gui_custom_container.
l_tree_container_name = 'TREE1'.
if sy-batch is initial.
    create object l_custom_container
      exporting
            container_name = l_tree_container_name
      exceptions
            cntl_error                  = 1
            cntl_system_error           = 2
            create_error                = 3
            lifetime_error              = 4
            lifetime_dynpro_dynpro_link = 5.
    if sy-subrc <> 0.
      message x208(00) with 'ERROR'.                        "#EC NOTEXT
    endif.
endif.
create tree control
create object tree1
    exporting
        parent              = l_custom_container
        node_selection_mode = cl_gui_column_tree=>node_sel_mode_single
        item_selection      = 'X'
        no_html_header      = ''
        no_toolbar          = ''
    exceptions
        cntl_error                   = 1
        cntl_system_error            = 2
        create_error                 = 3
        lifetime_error               = 4
        illegal_node_selection_mode = 5
        failed                       = 6
        illegal_column_name          = 7.
if sy-subrc <> 0.
    message x208(00) with 'ERROR'.                          "#EC NOTEXT
endif.
create Hierarchy-header
data l_hierarchy_header type treev_hhdr.
perform zbuild_hierarchy_header changing l_hierarchy_header.
create info-table for html-header
data: lt_list_commentary type slis_t_listheader,
        l_logo             type sdydo_value.
perform Zbuild_comment using
                 lt_list_commentary
                 l_logo.
repid for saving variants
data: ls_variant type disvariant.
ls_variant-report = sy-repid.
create emty tree-control
call method tree1->set_table_for_first_display
    exporting
      is_hierarchy_header = l_hierarchy_header
      it_list_commentary = lt_list_commentary
      i_logo              = l_logo
      i_background_id     = 'ALV_BACKGROUND'
      i_save              = 'A'
      is_variant          = ls_variant
    changing
      it_outtab           = gt_VBAK "table must be emty !!
      it_fieldcatalog     = gt_fieldcatalog.
create hierarchy
perform Zcreate_hierarchy.
add own functioncodes to the toolbar
perform zchange_toolbar.
register events
perform zregister_events.
endform.                    " Zinit_tree
*&      Form Zbuild_fieldcatalog
      text
--> p1        text
<-- p2        text
form Zbuild_fieldcatalog .
get fieldcatalog
call function 'LVC_FIELDCATALOG_MERGE'
    exporting
      i_structure_name = 'VBAK'
    changing
      ct_fieldcat      = gt_fieldcatalog.
sort gt_fieldcatalog by scrtext_l.
change fieldcatalog
data: ls_fieldcatalog type lvc_s_fcat.
loop at gt_fieldcatalog into ls_fieldcatalog.
    case ls_fieldcatalog-fieldname.
      when 'AUART' .
        ls_fieldcatalog-no_out = 'X'.
        ls_fieldcatalog-key    = ''.
    endcase.
    modify gt_fieldcatalog from ls_fieldcatalog.
endloop.
endform.                    " Zbuild_fieldcatalog
*&      Form zbuild_hierarchy_header
      text
     <--P_L_HIERARCHY_HEADER text
form zbuild_hierarchy_header changing
                               p_hierarchy_header type treev_hhdr.
p_hierarchy_header-heading = 'Hierarchy Header'.          "#EC NOTEXT
p_hierarchy_header-tooltip =
                         'This is the Hierarchy Header !'. "#EC NOTEXT
p_hierarchy_header-width = 30.
p_hierarchy_header-width_pix = ''.
endform.                    " zbuild_hierarchy_header
*&      Form Zbuild_comment
      text
     -->P_LT_LIST_COMMENTARY text
     -->P_L_LOGO text
form Zbuild_comment   using
                       pt_list_commentary type slis_t_listheader
                       p_logo             type sdydo_value.
data: ls_line type slis_listheader.
LIST HEADING LINE: TYPE H
clear ls_line.
ls_line-typ = 'H'.
LS_LINE-KEY: NOT USED FOR THIS TYPE
ls_line-info = 'ALV-tree-demo: flight-overview'.          "#EC NOTEXT
append ls_line to pt_list_commentary.
STATUS LINE: TYPE S
clear ls_line.
ls_line-typ = 'S'.
ls_line-key = 'valid until'.                             "#EC NOTEXT
ls_line-info = 'January 29 1999'.                         "#EC NOTEXT
append ls_line to pt_list_commentary.
ls_line-key = 'time'.
ls_line-info = '2.00 pm'.                                 "#EC NOTEXT
append ls_line to pt_list_commentary.
ACTION LINE: TYPE A
clear ls_line.
ls_line-typ = 'A'.
LS_LINE-KEY: NOT USED FOR THIS TYPE
ls_line-info = 'actual data'.                             "#EC NOTEXT
append ls_line to pt_list_commentary.
p_logo = 'ENJOYSAP_LOGO'.
endform.                    " Zbuild_comment
*&      Form Zcreate_hierarchy
      text
--> p1        text
<-- p2        text
form Zcreate_hierarchy .
data: ls_vbak type vbak,
      lt_vbak type vbak occurs 0.
get data
select * from vbak into table lt_vbak
                        up to 200 rows .                "#EC CI_NOWHERE
sort lt_vbak by AUART.
add data to tree
data: l_AUART_key type lvc_nkey.
loop at lt_vbak into ls_vbak.
    on change of ls_vbak-AUART.
      perform Zadd_AUART_line using   ls_vbak
                              changing l_AUART_key.
    endon.
endloop.
calculate totals
call method tree1->update_calculations.
this method must be called to send the data to the frontend
call method tree1->frontend_update.
endform.                    " Zcreate_hierarchy
*&      Form Zadd_AUART_line
      text
     -->P_LS_vbak text
     -->P_0379   text
     <--P_L_AUART_KEY text
form Zadd_AUART_line using    p_ls_vbak type vbak
                               p_relat_key type lvc_nkey
                     changing p_node_key type lvc_nkey.
data: l_node_text type lvc_value,
        ls_vbak type vbak.
set item-layout
data: lt_item_layout type lvc_t_layi,
        ls_item_layout type lvc_s_layi.
ls_item_layout-t_image = '@3P@'.
ls_item_layout-fieldname = tree1->c_hierarchy_column_name.
ls_item_layout-style   =
                        cl_gui_column_tree=>style_intensifd_critical.
append ls_item_layout to lt_item_layout.
add node
l_node_text = p_ls_vbak-AUART.
data: ls_node type lvc_s_layn.
ls_node-n_image   = space.
ls_node-exp_image = space.
call method tree1->add_node
    exporting
      i_relat_node_key = p_relat_key
      i_relationship   = cl_gui_column_tree=>relat_last_child
      i_node_text      = l_node_text
      is_outtab_line   = ls_vbak
      is_node_layout   = ls_node
      it_item_layout   = lt_item_layout
    importing
      e_new_node_key   = p_node_key .
endform.                    " Zadd_AUART_line
*&      Form zchange_toolbar
      text
--> p1        text
<-- p2        text
form zchange_toolbar .
get toolbar control
call method tree1->get_toolbar_object
    importing
      er_toolbar = mr_toolbar.
check not mr_toolbar is initial.
add seperator to toolbar
call method mr_toolbar->add_button
    exporting
      fcode     = ''
      icon      = ''
      butn_type = cntb_btype_sep
      text      = ''
      quickinfo = 'This is a Seperator'.                    "#EC NOTEXT
add Standard Button to toolbar (for Delete Subtree)
call method mr_toolbar->add_button
    exporting
      fcode     = 'DELETE'
      icon      = '@18@'
      butn_type = cntb_btype_button
      text      = ''
      quickinfo = 'Delete subtree'.                         "#EC NOTEXT
add Dropdown Button to toolbar (for Insert Line)
call method mr_toolbar->add_button
    exporting
      fcode     = 'INSERT_LC'
      icon      = '@17@'
      butn_type = cntb_btype_dropdown
      text      = ''
      quickinfo = 'Insert Line'.                            "#EC NOTEXT
set event-handler for toolbar-control
create object toolbar_event_receiver.
set handler toolbar_event_receiver->on_function_selected
                                                      for mr_toolbar.
set handler toolbar_event_receiver->on_toolbar_dropdown
                                                      for mr_toolbar.
endform.                    " zchange_toolbar
*&      Form zregister_events
      text
--> p1        text
<-- p2        text
form zregister_events .
define the events which will be passed to the backend
data: lt_events type cntl_simple_events,
          l_event type cntl_simple_event.
define the events which will be passed to the backend
l_event-eventid = cl_gui_column_tree=>eventid_expand_no_children.
append l_event to lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_checkbox_change.
append l_event to lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_header_context_men_req.
append l_event to lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_node_context_menu_req.
append l_event to lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_item_context_menu_req.
append l_event to lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_header_click.
append l_event to lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_item_keypress.
append l_event to lt_events.
call method tree1->set_registered_events
    exporting
      events                    = lt_events
    exceptions
      cntl_error                = 1
      cntl_system_error         = 2
      illegal_event_combination = 3.
if sy-subrc <> 0.
    message x208(00) with 'ERROR'.                          "#EC NOTEXT
endif.
set Handler
data: l_event_receiver type ref to lcl_tree_event_receiver.
create object l_event_receiver.
set handler l_event_receiver->handle_node_ctmenu_request
                                                        for tree1.
set handler l_event_receiver->handle_node_ctmenu_selected
                                                        for tree1.
set handler l_event_receiver->handle_item_ctmenu_request
                                                        for tree1.
set handler l_event_receiver->handle_item_ctmenu_selected
                                                        for tree1.
endform.                    " zregister_events
*&      Module USER_COMMAND_0100 INPUT
      text
module USER_COMMAND_0100 input.
ok_code = sy-ucomm.
clear sy-ucomm.
case ok_code.
    when 'EXIT' or 'BACK' or 'CANC'.
      perform Zexit_program.
    when others.
      call method cl_gui_cfw=>dispatch.
endcase.
clear ok_code.
call method cl_gui_cfw=>flush.
endmodule.                 " USER_COMMAND_0100 INPUT
*&      Form Zexit_program
      text
--> p1        text
<-- p2        text
form Zexit_program .
call method tree1->free.
leave program.
endform.                    " Zexit_program
<b>Reward if usefull</b>

Xml Publisher Report Without RDF

Hi experts,
I need to customize the seeded XML publisher report.Till now i developed XML publisher reports by developing rdf only. But here i didn't see any rdf for it..
without rdf how we can create the xml publisher report. I need to insert a field in this report where i need to insert this field.
where i found the SQL query for this report.Please help me
Thanks
Ashok

Thank u,
Here I need to customize the Sales Order XSL Template which is a seeded template in Order Management.
and it will execute when user select the actions button-> print and prview .so there is no concurrent program for this.they did the setups for this.
I didn't find any datetemplate for this in data defination window.here I need to change this one as
1.     Update the Report Header to read “Dispatch Note” instead of “ORDERING DOCUMENT”.
2.     Inclusion of logo for each police authority (Open Issue).
3.     Modification to include *“United Kingdom” instead of U.S.* in the free text portion of the PRODUCT section. “United Kingdom” value will be derived from the country specified for the selected organization and not hardcoded.
4.     Footer to include shipment date instead of Sales Order Creation date and the document should be available to print only after Ship Confirm.
5.     Updating the Layout template in the Transaction Type setup, so that it points to the modified layout template.
6.     The modified Dispatch Note document will be included in the Ship Confirm document set and this document set will be included in the respective Ship Confirm rules. This Ship Confirm Rule will be attached in the Shipping parameters tabs for both the organisations. This step would enable the Dispatch Note to be printed automatically after successful completion Ship Confirm process.
I have *.XSD file and .XSL file * .. I don't find any data template in datadefination window to see the SQL query.
I thought now i have to change the *.XSD AND .XSL FILES* is it right? Is there any other solution for this ..
Thanks
Ashok
Edited by: 886640 on Oct 11, 2011 6:41 AM
Edited by: 886640 on Oct 11, 2011 10:00 PM
Edited by: 886640 on Oct 11, 2011 11:07 PM

Posible to start a report without a button, only i Select List ???

Similar Messages

Maybe you are looking for