Positioning Frame or Field during executing on 6i.

Hello.
How position from parameter, a frame or field before the report execute?
Thanks, so much.
Martônio.

You cannot know if you are on the last page or not. See this similar thread: Get value of total pages variable
Why not put the page number in the margin like this:
Page 1 of 3
Page 2 of 3
Page 3 of 3
You do that by creating a text field in the margin. Enter this text:
Page &<PhysicalPageNumber> of &<TotalPhysicalPages>

Similar Messages

BADI for changing fields during Creation of BP in CRM

Hello to everyone,
I need to find a BADI (or other way) to default several fields during BP creation in CRM (4.0 SR1 SP9). The fields I will like to set are TAX TYPE, TAX NUMBER, TAX CATEGORY, etc.. I have found the BADI BUPA_TAX_UPDATE but i dont see any suitable parameters (structures) to changes these fields. Please advice and thanks in advance.

Hi
If you use function BUPA_NUMBERS_GET then your BP number will already be buffered and you can avoid a DB read. It may also be that the BP is not in the DB yet anyway.
You can only pass one GUID in at a time - loop through IT_CHANGED_INSTANCES into a variable of type BU_PARTNER_GUID and pass that into the function as input parameter IV_PARTNER_GUID.
Cheers
Dom

PPCO0007 User Exit for Changing Header Fields During Order (CO40)

.. Hi !!!!
I need your help or suggestions,
I need to change the standar order before to save, i found the user exit PPCO0007,
i assign the new value for the order, but when finish the fuction, EXIT_SAPLCOZV_001, the new values are
lost, and finally the system set the standard order.
Someona know how can change the order and the the batch.
Thanks
Noemí Huerta

Hi Noemi
You can use the enchancement PPCO0007 (exit when the production order is saved).
Use the function module EXIT_SAPLCOZV_001 (User Exit for Checking or Changing Header Fields During Order Save) to update the field priority starting the information in the material-customer info record.

Skipping fields during content conversion

is it possible to skip fields during content conversion in file sender adapter?
The case is, the CSV file contains 300+ field and i only need 10. Therefore i have created a datatype with those 10 field.
I was hoping to skip the fields i do not need during content conversion.
If this is not possible i see no other than to create a datatype with 300+ fields by hand. Which will take all day!
Hopefully there is a solution, since i could not find what i needed on the SAP Help or SDN.
Thanks in advance for all your time!

Hi M,
is it possible to skip fields during content conversion in file sender adapter?
No .. this is not possible during FCC.
The case is, the CSV file contains 300+ field and i only need 10. Therefore i have created a datatype with those 10 field.
Hopefully there is a solution, since i could not find what i needed on the SAP Help or SDN.
Well, you can give it a shot. There are freewares available on internet, which can transform the CSV file to XSD. Then you can import that XSD structure in ESR.
The only point is that your source CSV file must be having the header (with all field names on it).
I had done this with another integration tool, no idea how it will work with PI. But it's worth giving it a try.
If this is not gonna happen, then you have no other option but to create complete DT manually or use adapter module (not recommended for such cases).
Regards,
Neetesh

Position to first field in a form WITHOUT JAVASCRIPT

DOes anyone know how to position to a field in a form without using javascript OR is there code that can be used in JSP to tell whether the browser is javascript enabled and within that block, use javascript to position to the field.

Unfortunately, the only way I know how to do it is using JavaScript and the onLoad event. You can determine if a browser is JavaScript compatible simpley by looking in the request header for the type and version of the browser, and you know which browsers support javascript. But you'll need to use javascript to figure out if they actually have javascript turned on.
-Derek

How to hide the Parameter field during Run time?

Hi,
How to hide the Parameter field during Run time?
I have a parameter field which behaves differently depending on the User logged in.
I am using reports 10G
For ex: I have 3 field created in JSP
CUSTOMER
PROVIDER
FROM DATE
END DATE
If the user = 'SUPER show all the parameter
CUSTOMER
PROVIDER
FROM DATE
END DATE
If the user is 'GATEKEEPER" Just show
PROVIDER
FROM DATE
END DATE
Can I do that?
Please help
Thanks.
KK

hi, i'm not familiar much with JSP. but i think workaround is to create two window one which have 4 fields and the other which have 3. if user is SUPER then call the first screen otherwise if user is GATEKEEPER then call the second screen.

One or more frames were dropped during playback???

I have finally complete my movie.... now when I play it back there are two clips which produce this error message:
"One or more frames were dropped during playback"
It tells me I can:
"Turn off unlimited RT" (which is off)
"lower compression data rate" (no idea what that is)
"Close open sequences" (but Im working with the only one open)
"lowering preference for real-time audio tracks" (??)
"increase speed of system..."
Any suggestions on an easy fix? The clips worked before... I think it was when I added a transition that they stopped working. I took out the transition but nothing changed. I even tried to delete the clips and recreate them from the original source saved on my comp. Thanks in advance!

Sounds like your drive is fast enough? Are you playing back rendered material or unrendered? Are you using Unlimited RT or Safe RT?

Position of a field on the layout

Using Oracle 10 g, what code should I write in a trigger to make the position of a field on the layout dynamic (set location on the layout)

At this time it is not possible to move the Description field in the page layout and you can not change the size of this field. I would recommend that you submit a enhancement request to CRM On Demand customer care.

Error during executing the tp command 'tp Connect DEV...

Dear All,
   There is error when I SPAM support package SAPKB70010.(SAP ECC6.0)
   Info:
   Import phase 'CHECK_REQUIREMENTSS'
   \HOSTNAME\SAPMNT\trans\bin\TPPARAM
   Error during executing the tp command 'tp connect DEV...'
   TP return cod:'0208', tp message:'error in transportprofil (param missing,unknow..'tp output
   sapmnt\trans\bin\TPPARAM could not be opened.
EXIT
ERROR:
System: Parameter SAPEVTPATH not set. Batch jobs cannot be started.
Error in
hostname\sapmnt\trans\bin\TPPARAM: transdir not set.
tp return code Summary:
TOOLS:Hightest return code of single steps was:0
ERRORS: Highest tp internal error was:0208
My environment:
Win2003 X64
Oracle 10.2
SAP ECC 6.0 Basis 700 09
Kernel patch num:254
How to solve the issue?
Thank you very much!

Hi
2 possible problems.
1) tp is using the wrong profile
2) the profile is not complete
For 1, specify the profile when using the tp command e.g. tp connect dr1
pf='/usr/sap/trans/DR1/bin/TPPARAM'
For 2 you need to edit the TPPARAM file and insert the correct values e.g.
DR1/sapevtpath = /usr/sap/$(system)/SYS/exe/run/sapevt or you can add
it into the command line with the -D option
At the command prompt enter 'tp connect' and the help file will be
displayed for that command with the available options
Cheers
Nirav Kundaria

OVS - how to change the position of the fields in the OVS search criteria

Hi,
I have an OVS search screen where 4 search criterias are there.Based on the search criteria , the values will be papulated in the OVS screen.
Now I have to change the position of the fields in the search criteria.Means if the Maximum field (one of the search criteria) is in the first position,I need to put it in the last position.I have ro change the position of the search criteria field and not the result fields.
Please suggest me how to do that.
Regards
-Sandip

Hi Sandeep,
please go through this article for customizing Value Help:
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0c6132f-4ea3-2b10-4d8f-e68d2e96113d]
Thanks and Regards

In imovie 11, with an iMac, latest Mountain Lion, sometimes I insert a still and when I playback, the previous image freezes the last frame and holds during the duration I set for the still, skips both transitions, and jumps to the next clip. why?

in imovie 11, with an iMac, latest Mountain Lion, sometimes I insert a still and when I playback, the previous image freezes the last frame and holds during the duration I set for the still, skips both transitions, and jumps to the next clip. why?

in imovie 11, with an iMac, latest Mountain Lion, sometimes I insert a still and when I playback, the previous image freezes the last frame and holds during the duration I set for the still, skips both transitions, and jumps to the next clip. why?

Dropped frames were detected during the last capture attempt???

I have been getting the message "Dropped frames were detected during the last capture attempt". I cant figure out what it is.
I have a Mac OS X version 10.4.11 Processor 2 x 2.66 GHz Dual-Core Intel Xeon
2 external lacie disk drives, 1TB each
FCE Easy setup: all formats, Use: DV-NTSC
Sony DVcam HDV HVR-M15U Deck firewired to back of Mac
Can someone help?

Dropped frames during capture are typically a result of a slow disk setup.
Where is your Capture Scratch folder? (System Settings)
Are you external drives connected via Firewire also?
Often the internal drive (SATA) is much faster than the Firewire
interface. Try capturing to your internal, then moving to
the externals for editing and backup.

Position Cursor on Field

Hi All,
I have a requirement to check if the field Delivery Note has a value when doing goods receipt via MIGO or MIGO_GR. If this field has a value, the system should issue an error message and the cursoe should be positioned in that field so that the users will know that they need to fill it in. My question is how will I make the cursor go to that field given that this is not a required field in MIGO?
Thanks,
Jim

hi,
use set cursor field for that particular field in the program.
regards,
keerthi

Frame Address Fields

In a Frame Address Field, you get the destination and source MAC addresses. But does the frame address field in a frame structure also include source and destination IP addresses? (I am referring to layer 2 of the OSI model)

I suppose it would boil down to the phrasing of the question.
As Kamal mentioned, the L2 Frame contains an L3 packet, which DOES contain IP source/destination addresses.
If the question specifically asks about the frame header, then no, there's no IP info (other than the field that says that frame has an IP packet versus an IPX or DECNet packet)
If it asks whether a frame has / can contain IP address info ... well, yeah, it can.
Definately lame, but I'll bet many of us have seen questions this lame or lamer on the real tests.
Good Luck
Scott

Error during execute UTL_MAIL package

I am using Oracle 10g in windows environment.
I got following error during execute utl_mail.send package.
ERROR at line 1:
ORA-29278: SMTP transient error: 421 Service not available
ORA-06512: at "SYS.UTL_SMTP", line 21
ORA-06512: at "SYS.UTL_SMTP", line 97
ORA-06512: at "SYS.UTL_SMTP", line 139
ORA-06512: at "SYS.UTL_MAIL", line 405
ORA-06512: at "SYS.UTL_MAIL", line 594
ORA-06512: at line 2
What is the solution..
Message was edited by:
Pankaj Gupta

Are you sure your configuration is set up correctly.
Note: the UTL_MAIL package is not installed by default. It can be created by running two scripts, <ORACLE_HOME>/rdbms/admin/utlmail.sql and <ORACLE_HOME>/rdbms/admin/prvtmail.sql, from a SQL*Plus session.
In addition, a new initialization parameter, SMTP_OUT_SERVER, specifies the name of the mail server domain. Oracle does this because it gives the DBA a chance to secure the port that SMTP_OUT_SERVER defines from being overloaded from incoming data transmissions. If SMTP_OUT_SERVER is not defined, however, Oracle automatically accepts the domain from the DB_DOMAIN initialization parameter instead.

Positioning Frame or Field during executing on 6i.

Similar Messages

Maybe you are looking for