Positions reporting to Mutiple positions

hi ,
i have a scenario where in the Reporting structure
A position is reporting to multiple positions , how to maintain this in OM ?
kindly reply
regards
hr_user

Hi
Sorry Gupta, I think A012 relationship is only to make a position as a Chief Hat position and this is basically between a position and Org, Unit. Not to maintain the position to position relationship.
My suggestion is to maintain the position to position relationship.
Note: Please take in to consideration multiple relationship structure if you have workflows.
Thanks
Sheetal

Similar Messages

Reports Distribution

Hi,
We have been distributing reports to mutiple destinations for almost six months now without any problems. The volume was low, approximately 2000 pages per day.
Now, the volumes hav increased to 15000 and suddenly the report fails to distributes !! It completes all the activities and then gets stuck at the After Report trigger. After an hour or so, it comes out with a memory error. the second time, it just came out with a null error.
Has anybody faced a similar problem ?
Is there a limit to the number of files that can be created via distribution?
Regards.

I have found the same problem if the report is generated in pdf format;
I only have a simple query for know the memory used for the oc4j:
select count(*)
from all_objects objects2
, all_objects objects1
where rownum < (700 * 80 )
it generates around 56000 records ( near 700 pages with 80 records per page ), and with the use of OC4J for generating only this report, the memory consummed is over 250Mb.
In production environment the next error is presented if many users try to get a generated pdf from reports services:
ORA-29532: Java call terminated by uncaught Java exception: java.lang.OutOfMemoryError
ORA-06512: at "SYS.XMLPARSERCOVER", line 0
ORA-06512: at "SYS.XMLPARSER", line 89
Several memory paramenters of the application server and database session parameters has been adjusted (sga_* / java_*) without any good result for delete this error.
It seems an xml parser error relative to the use of DOM,
but ¿Is Oracle Reports Implementation using DOM as a media to generate the pdf format?

How can I get my Report to open on the fist tab always when file opened

Hi,
I have one report with mutiples tabs, however I would like my file SWF/PDF to always open on the fist tab. Any ideas?

I believe the SWF will open to whichever tab you had active at the time you exported the dashboard. So if you want your SWF to always open to the first tab, just make sure that the first tab is the active tab when you export your dashboard to a SWF.
Hope this helps,
Jeff

Mutiple Language Templates in BI

Hi,
We have a requirement to generate reports in mutiple language. I am very new to the BI publisher/XML. So I wanted to know the process.
Is it going to be single template registered in mutiple languges or the templates needs to be translated and registered.
Please let me know ?
Thanks in advance!

Hi user566169,
I am working on the same task.. here is what I did..
I am using BI Publisher 10.0.1.3.3.0. I have one report named MyReport. I created XLIFF files from Generate XLIFF tab. I saved my XLIFF Files according to the naming convention of BI Publisher as MyReport_it_IT.xlf (Italian Itali) and MyReport_ja_JP.xlf (Japanese Japan). Also I changed template names to MyReport_it_IT.rtf and MyReport_ja_JP.rtf respectively and uploaded the same. Then I changed UI language and Report locale from Preference tab in BIP to Italian (Itali). Then I run the report. Now report should run with MyReport_it_IT.xlf and MyReport_it_IT.rtf, but neither xlf is getting applied nor rtf. the same problem is with Japanese (Japan) locale. I think, I am missing something.
I tried renaming xlf files to MyReport_it.xlf and MyReport_ja.xlf (Removed territory code). Template names to MyReport_it.rtf and MyReport_ja.rtf. Then I changed UI language and Report locale from Preference tab in BIP to Italian (Itali). Now in this case xlf file got applied to the report but template is not getting reflected. The same problem is with Japanese (Japan) locale.
Regards,
Amit Deshpande
Persistent Systems Ltd.

Page number reset in .rtf template

Hello,
In the AR statements report, If I run the report for mutiple customers, page number has to be reset for each bill_to customer...
I have the header part from the second page, so when I run the report for multiple customers...even for the new customer's first page...header is coming....
So I assume by resetting the page number for every bill to automatically solve the issue of header from second page...
Please advise...how to reset the page# based on a condition ( for each bill to)...I know it work with @section....
but my template is like <?for-each-group:G_STATEMENT;./STATEMENT_DATE?><?for-each-group:current-group();././././././././././././././SEND_TO_ADDRESS_ID?>
-Sridhar
Edited by: user7751421 on Oct 12, 2011 4:32 AM

If you could send me your xml and template i can give a try.
[email protected] is my email id.

XML DUNNING LETTER TEMPLATE ISSUE

Hi every one,
I mapped the fields for the dunning letter report in RTF file.
I have an issue when i work into dunning letter template for xml report.
My Client wants to run the dunning letter by choosing the different languages before they run the concurrent program.
I dont knw where to write xml coding to make this report for mutiple languages and you please could any one knw the answer step by step.
please drop the solutions immediately and its very urgent.
Regards
Prabu

Set the language preference on the customer site on the "Characteristics" tab, then when the program "Dunning Letter Print from Dunning Letter Generate" runs you will have a separate output for each language. Then run each output through the "XML Report Publisher" program and choose which XML template to run.

SetDataSource function taking too much time !

Hi,
We are using Crystal reports 2008 for developing our applications in Visual Studio .Net 2005 widows application.We are using Crystal viewer ActiveX control in our windows application for displaying the reports. The datasource we are using is strongly typed XSD files. And we have mutiple xsd files for each report with mutiple tabels in it.
We are using SetDataSource function for setting the data for each table from .Net code to report by push method. But it takes lot of time in this part.
Kindly Help.
Thanks,
Shyam S

Hi Johnathan,
We are passing the data from the database to crystal reports using XSD files.
These XSD dataset fiels are included in our project. And first we populate the data into the objects of these datasets files and use the setdatasource function of crystaldocument class to assign the data from the XSF tables to the respective table in the report.
The report database is constructed using these ADO.NET (XML) new connectin pointing to the XSD files.
And these tables which show in the report database are used in the report.
These setdatasource functions are taking around 20 seconds to process; eventhoug the dataset objects we have in the code are the same objects of the XSD files which are used in the report. so it is just like assignment of data from code to the report which should not be taking so much time. Also datasets doesn't return more than 20 rows.
We are using version 12.1.0.892 of crystal reports 2008. Yes i have installed SP1 for crystal reports 2008.
One more observation i have found is that the more the number of tables i have in the XSD file more the time it takes, eventhough i may be using only one table in that particular XSD file. I have checked this by noting the time differences by adding unwanted tables in the existing XSD files.
So i think eventhough i am assigning only one table using this statement, it loads the whole xsd file before loading the data
CrystalDocumentObj.Database.Tables["CON_InvoiceSummary"].SetDataSource(reportConfigurationDS.Tables["CON_InvoiceSummary"]);
Is there anything can be done ?
Thanks,
Shyam S

Performance of BI Server joining multiple of Essbase Cubes

Hi Guys
I would be very grateful if you give me some direction on the following issue: I have multiple cubes and a user wants to creata reports using information from more than one cubes. I have two choices:
First choice is to use Oracle BI server and join cubes
Second choice is to create separate cubes depends on user requirements
As you know the second method is not elegant as first, but I am worrying about the performance of the first choice because the aggregation now has to be done in the BI server rather that in the cube (which is good at). The reports are created dynamically. Any ideas pleas?
Regards
Chandra

Depending on the requirements, you could use FR (Financial reporting) with mutiple hidden grids that are joined in a visible grid. or Web analysis with mutiple grids or OBIEE+ or Excel with mutiple retrievals.Or a third part tool like Doceca to bring it together

HR-PA Report. How to get persons with position but no task.

The code below selects the persons connected to a position but out of those i need to find which are not connected to a task.
+SELECT pa0000pernr pa0001pernr pa0001begda pa0000stat2
          pa0001sname pa0001orgeh pa0001~bukrs
          Pa0001~plans
   INTO CORRESPONDING FIELDS OF TABLE itask
              FROM pa0001
                INNER JOIN pa0000
                  ON pa0000pernr = pa0001pernr
                  WHERE pa0001~PLANS NE '99999999'
                  AND pa0000~stat2 EQ '3'
                  AND pa0001~VDSK1 EQ 'IT'
                  AND pa0001~PERSG in ('1','T')
                  AND pa0001~bukrs in
                  ('FR46','GB21','PL05','BE06','US22').
IF sy-subrc = 0.
    SORT itask BY pernr begda DESCENDING.
    DELETE ADJACENT DUPLICATES FROM itask COMPARING pernr.
ENDIF.+
To select the persons not connected to a task I think that i need to check against sobid in table hrp1001 and somehow according to the conditions below
select sobid from hrp1001 for persons NE to the conditions below. (i think)
rsign : B
relat 007
objid : position
sclas = T.
Or is there an other way to solve this issue?
I have looked at report RHSTRU00 to use Evaluation Paths is that possible?
Best Regards Claes
Message was edited by: Claes Widestadh

Hi Claes,
Your statement "The code below selects the persons connected to a position but out of those i need to find which are not connected to a position." is not clear.. What is your requirement? Do you want to find employees not assigned any position? or Positions not tied to a Job? What is task? A position is described by a Job via B007 relationship in HRP table.
Is this want you want?
Regards,
Suresh Datti

TDS Amount on Vendor Advance Shows positive value in *QUERY* for TDS Report

Hi Everybody,
I have made a query for List of TDS Report with Vendor informations as required by my client. In which the value of TDS on Vendor Advance Payment appears as positive value instaead of negative value. Please suggest how to rectify.
Thanks,
Paul

Dear,
If you have cleared the advance in F-54, then this will reverse the tax amount. That could be the reason for tax amount in debit.

While generating reports in Oracle BI Publisher in pdf format, the generated pdf reports have hindi इ matra displaced by one character. For example, रिपोर्ट is printed as रपेिोरट. Word file generated of the same report have correct hindi इ matra positi

While generating reports in Oracle BI Publisher in pdf format, the generated pdf reports have hindi इ matra displaced by one character. For example, रिपोर्ट is printed as रपेिोरट. Word file generated of the same report have correct hindi इ matra position and also pdf generated from this word file also contains the same.

How to Change the position of Column in ALV report

Hi Follks,
    Is is possible to change the position of column in ALV report?.If yes then how?
    Basically my requirement is, that user want afacility where , he should be able to change the position
    of column aftre he runs the report.
    Eg: After running the report , user felt that column 5 should be at position 2 , in that case he should
           be able to drag column 5 at position 2 and vice versa.
    Please help me, how to solve this issue.
    Note : I am using NW 7.0 SP 9
    Regards
    PG
Edited by: PG on Apr 13, 2009 11:10 AM

HI PG,
do below whie filling the filed catlog
wa_fieldcat-fieldname        = 'Field1".
wa_fieldcat-COL_POS = '1',
append wa_fieldcat to it_fieldcat.
wa_fieldcat-fieldname         = 'Field2".
wa_fieldcat-COL_POS = '2',
wa_fieldcat-fieldname         = 'Field3".
wa_fieldcat-COL_POS = '3',
Thanks!

How to display the header data on different position in alv report

hi all,
how to display the header data on different position in alv report.
for example ,
customer                                                   name
xxxx                                                         xxxx
                 vendor        name     street
                  xxxx         xxxx      xxxxx
pls   help me .

hi
as per my understanding you need to trnasfer header internal table data to pdf..
please check the following links for internal table to pdf..
Convertion of Internal table data to PDF
This link is related to ur issue
Re: how to insert the calling of the FM: OTF to PDF
Thanks

Report region to display at a certain position

I have many regions in a report page, they are all in Report Template Body 3 position. I use column# to arrange the display order.
Regions that have data will always display first, those that do not have data are conditioned to not display. I may end up region displays at different position depends on how many regions have data. for example:
if I have 2 regions that have data, it shows: --------region1--------- (many spaces in between)----------region2----------
I want no matter how many regions I have data: --------region1-------------------region2----------
Sort of those display regions should be all next to each other. How do I control that display position?
Thanks,
Yivon
Edited by: YivonH on Sep 5, 2008 9:19 AM

Thanks for the replies. I really appreciate!!!
The link examples seem to have predefined set of regions, mine is more dynamic -- Not knowing how many region will display.
A hint I got from the links is: Get the display position, with width and height, from the previous region and set the position for the next region with the same width and height.
Can anyone show me how to do that? I am a newbie to the web programming...
Thanks again,
Yivon

Standard report with fixed position.

Hello,
I have a page where i want the first report to have a fixed position.
I have 3 regions with reports, the first will only display product name and number, the next report will display sales. The last report is very long so I have to scroll quite a bit. That's why i want the first report with names to have a fixed position so i can see which product i'm looking at.
I have tried to make a copy of the standard report template, and in the before rows i have this code
<table class="t3standard" summary="Report" style="position:fixed;">
this didn't work
Is this a way of making changes to the report template? Is it possible to make theese kind of changes in the report template or du I have to go inside the CSS file to add position:fixed somewhere?
Anders

What browser(s) are you using? Win IE doesn't support fixed positioning :-(
How about setting a fixed height for the last report and making it scrollable using overflow: scroll? This would make the first 2 reports "fixed" by default...

Positions reporting to Mutiple positions

Similar Messages

Maybe you are looking for