Possible 1.3 Leopard fix for HP, but wierd Elements behavior
Please forgive me for copying what i typed on another forum, but it is a long process to type over again.
ok, here's hoping i dont jinx my latest luck by sharing this method before messing around with it some more. I have an HP 9800 so, of course, your milage may vary based on printer type. Here are several steps that i did in attempting to fix the issue of lightroom printing useing color profiles, I dont know which one fixed it. The first thing i didn was repair disk permissions, which i hadnt done since installing leopard and upgrading to lightroom 1.3. Then i unplugged the printer and went into the printers/fax part of system preferences and removed the printer from the box on the left. Then i right-clicked on it and chose reset print settings or something to that effect. Then I went to the library folder and erased all of the pre-installed printer drivers (which took a while, there are a ton of them that i will never use). Then i plugged the printer back in and ran software update. It found the current HP drivers for my printer. I did all that last night before bed. This afternoon I tried printing from lightroom, and while i had to redo my presets for the printing, I was able to print, using application managed colors, and get an accurate print that seems to be honoring the print profiles.
After that i tried printing in elements with profiles, which hadnt worked for me before either:
As an update, I just tried printing with Elements 4. Previously, while lightroom had a very yellowed out somewhat desaturated look when printing with profiles, Elements had a magenta, orangey cast. After following the steps above, the lightroom prints now look accurate, but elements now has the yellowy desaturated cast that lightroom previously had. This is good and bad as I use lightroom for bulk printing but elements for more accurate specialty prints. Must be something with the new driver pipeline that others have mentioned with leopard, and how the old drivers and the new drivers interact with that and each other, at least that would be my guess.
Anyone know why this fixed lightroom for me, and why elements printing wanst working since upgrading to leopard and still isnt? Thanks
go to the hard drive, the folders before you go into your user folder. Go to library, find the folder for printers and delete everything in it. I know hp is using software updater for drivers, dont know about epson. I then just plugged the printer in, ran software update, and got those drivers.
Similar Messages
-
my on off button on my iPhone isn't working and it has been for several months but i went to the apple store today and the warranty was only 16 days over is it possible to get it fixed for free
If the genius at the Apple Store did not offer repair under warranty then NO
12 months is 12months asume you did not have AppleCare -
I believe you can only look a your emails if you have a eircom email account and you can not send or answer them with a eircom account if this is so can anybody tell me if there is a fix for this problem or would i better off just useing another email account that will work with ipad Reason i ask is i am just about to buy a ipad air and if this is not possible to use my email address to send emails from my ipad i would be better off with my laptop Thanks Napster
There are lot's of posts via a google search and it seems you certainly can set up your eircom account on your mailbox on iPad. Read this thread link:
https://discussions.apple.com/thread/4022610?tstart=0 -
Any fix for why my photoshop elements 12 will not launch?
Hi - had to get new computer after old one died... reinstalled (twice) Photoshop Elements 12 and now it will not launch. When I click on icon, the first screen open allowing me to select between the Organizer and Editor. When I click on Editor, nothing happens... never launches. Seems this has happened to others, anyone know how to fix?
Thanks!!Did you ever use Help> Sign In to activate it? Both entering a serial number and signing in are required (once signed in you don't ever sign out unless you want to deactivate the software).
The advice here - http://forums.adobe.com/thread/1452533?tstart=0 - should allow the software to restart so that you can activate it.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks. -
Less destructive fix for the "original file could not be found" issue
+(Note: this is mostly a copy of the post I just submitted in reply to http://discussions.apple.com/message.jspa?messageID=6785594#6785594)+
Most solutions to the "The song xxx could not be used because the original file could not be found. Would you like to locate it?" issue involve deleting iTunes library files, deleting-then-re-importing everything from iTunes, and other destructive techniques. I found an easier fix for this, but it might be (a) specific to libraries on a network drive (NAS) or (b) specific to me. YMMV, but give it a try. This was on a Mac, so a Windows solution might exist with the same technique. Please post here and let me know if this works for you!
After some investigating and trial-and-error, I discovered that if I viewed a list of songs in Finder, iTunes could find the files again. For example:
*Double click on a song in iTunes and get the "original file could not be found..." error. Do not say 'Yes' to locating it.
*Open Finder and locate that Folder of songs
*Double-click on another song from that album. It should work.
So, my fix: *run a command that lists/touches every file in your iTunes music folder.*
For Macs:
*Open Terminal
*Run this: *ls -R /Path/To/Your/iTunes\ Music \Folder/* (note how you 'escape' spaces in the folder name with back-slashes).
Windows:
*Start - Run - cmd
*Run this: dir /s \Path\To\Your\"iTunes Music Folder" (note that you escape spaces by quoting the dir name.)
My NAS is named "VAULT" so my command was "ls -R /Volumes/VAULT/My\ Music/" You will see the files being listed at light speed -- ignore this. It will run for a while, depending on how many files you have, about 30 seconds for me. After executing this I could listen to any music file in iTunes!
But, every time I lost my connection to my NAS, such as waking from sleep mode, I had to run it again. So I created an Automator application and a Apple Script to run it from within iTunes so I can run it any time I need to. If you don't want to do that, just run the command I specified. If you want to download my Automator app, or see instructions on how to create your own, check out my blog post: http://40withegg.com/2008/3/8/mac-attack-making-itunes-find-those-original-files -especially-on-a-nas
With any luck, my post will be *completely unnecessary* soon because Apple will find a real solution to this.Jeffe hello,
I have seen more problems created by the consolidate command than I have ever seen fix things... I'm not saying it does not work but what it does do and what it does not is very hard to work out for most and major problems are the result...
to sort your problem do this...
1. Open your iTunes folder in the Home Music folder and make a backup copy of the iTunes Library file and put on the desktop.
2. Start iTunes and in the Library sort on the Heading 'Date added' ... you may need to install it... control/click on heading-bar and select from popup menu.
3. When you have sorted scroll to half way and you will see the songs are split evenly... select the ones you want to remove with a shift/click and hit delete key... say no about move to trash for now.
4. Check that everything is as you want it... if so carry on... if not come back and tell me what happened.
5. Quit iTunes and put the iTunes Library file in the iTunes folder in a safe place like your Documents folder... drag the copy from desktop and put it in the iTunes folder.
6. Check the name is correct on the 'copy' edit it to be iTunes Library.
7. Start iTunes by double/clicking on the file and go through steps 2 & 3 again but this time when you delete say yes about move to trash... don't empty it yet 1st check that all is OK with your library.
You can edit the good files that you are left with but the addition of '01' in the name will not have any adverse effect on them at all... editing with an Applescript is very easy.
take care Jeffe and let's know how you get on or if you run into any unforeseen problems ... TP -
Is there a fix for metro apps audio ducking while in a Skype call
Hello, I have been looking all over the internet for a fix for this but so far it doesn't seems like there is a way to fix this.
I'm trying to use Metro apps while in a Skype call but if I click out of the app the volume lowers to about 20% of what it was at before.
"When Windows detects communicates activity" is set to "Do nothing" but it does not control the Metro part of windows 8.1.
Is there some type of hack that be used to stop Metro apps from lower the volume when in a Skype call, Teamspeak or Mumble. As a gamer this makes the Metro part of Windows completely useless.Hi,
I made a test in my testing enviroment, when using Skype(Store APP) for phone call, system background volume would reduce, while after I'm back to desktop, it would return to former volume.
For your situation, this problem can be caused by Sound Card driver problem, you can try to reinstall Sound Card driver for test.
If no use, please also try to reinstall Skype for test.
Roger Lu
TechNet Community Support -
I have a webpage which appears ok in Firefox and Safari but
fails to format correctly in IE.
www.offalog.co.uk
I looked at the code generated and found that DW has inserted
css fixes for IE but these do not seem to work.
Any clues as to what I should do?This method works with simple layouts. The Behavior url thing needs to go inside an IE Conditional Comment to target Pre-IE9 browsers.
Also, I prefer to apply this to a Div ID as this carries more weight than .classes alone.
/**CSS ROUNDED CORNERS for Mozilla, Webkit, Linux, Opera, IE9**/
#Your-Div-Name,
#Another-Div-Name,
table
border: 5px solid #FFF;
-moz-border-radius: 20px;
-webkit-border-radius: 20px;
-khtml-border-radius: 20px;
border-radius: 20px;
See link below for further details:
http://alt-web.com/DEMOS/CSS-Rounded-Corners.shtml
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb -
Is there still no fix for airtunes?
can not get airtunes to work at all with airport express. the speaker thing in the bottom right of itunes doesnt even show. ive seen posts for fixes for macs, but nothing for xp. and ive not seen anyone else complaining about it.. did i miss a fix or something?
Hi itsjustnoise,
Welcome to the forum! I trust you've tried the basics? In Airport admin (which I'm sure you have a form of on the XP side). Open it up, click configure on your AEX. You'll see tabs for Airport, Internet, Networking, Port Mapping, Access Control, WDS, and Music. Click "Music." Make sure you've checked "Enable Airtunes on this base station"
Over in your iTunes music player, go to preferences, make sure under the "Advanced" tab, in the "General" section, you have clicked "Look for remote speakers connected with Airtunes"
Check that. If still no love, I can't help you any farther.
Good luck -
Searching for a list of elements in an array
Hi,
In labview you can search an array for an element and it will return
the index of the element that is found. Is it possible to search an
array for a list of elements, say multiple elements that are follow
each other.
For example if I have some array that looks like this
1
0
1
1
1
0
1
1
1
the array continues for about 3000 more elements. This is digital data
thas has been slightly parsed from a pxi 6561. I would like to further
parsing in array form since it would be more efficient than using
strings, (less memory intensive). Is it possible to search in this
array for the sequence 101, and return the index where this is found.
A sample of the array I am referring to is in the indicator of the vi I have attached.
Thank you,
-Tim
Attachments:
testprogramparsingarrays.vi 118 KBSorry, I no longer have LabVIEW 7.1, so here's a picture of a possible solution (the "=" is set to "compare aggregates").
Message Edited by altenbach on 12-06-2006 10:17 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
PatternSearch.png 18 KB -
Just had an automatic update to 10.6.8 last week and then my mail app failed to work after that. Had my Mac in at the iStore in Cape Town for 3 hours and received it back with the same problem. Please advise if there is a fix for this or how I should go about sourting out the problem. Thanks in advance.
Mac OS X v10.6: Mail.app won’t open, or "You can't use this version of Mail…" alert after installing Security Update 2012-004:
http://support.apple.com/kb/TS4424?viewlocale=en_US&locale=en_US
Fellow user Grant Bennet-Alder offers this solution:
Some users have reported this problem if the Mail Application has been moved out of the top-level /Applications folder, or duplicated in another location.
When the Security Update is done, the old version of Mail is disabled.
The solution has been to:
1) make certain Mail is in the /Applications folder
2) There is no other copy anywhere else.
3) Once steps 1 and 2 have been done, Manually download and re-apply the Security Update (2012-004) by hand.
Security Update 2012-004 (Snow Leopard)
If the Mail.app has been LOST, it can be re-installed by applying the 10.6.8 version 1.1 combo update. But this update is quite large and it is usually not necessary:
Mac OS X 10.6.8 Update Combo v1.1 -
When I send an email with bcc recipients, the bcc does not show in my sent mail so I can't reference back later who I sent the email to. Worked in Snow Leopard but not in Yosemite. Please advise if their is fix for that.
Did you select View->Bcc Address Field from the menu bar?
-
Possible Fix for Printing Problems in Leopard
I got this information from Mac OS X Leopard Edition book by David Pogue. Here's his possible fix for printing problems in Leopard...Open web browser and enter this address http://127.0.0.1:631. You'll find youself at a secret "front end" for CUPS (Common UNIX Printer System), the underlying printing technology for Mac OS X 10.5. This trick lets your Mac communicate with a huge array of older printers that dopn't yet have Mac OS X drivers. Using this administration screen, you can print a test page, stop your printer in its tracks, manage your networked printers and print jobs, and more–a very slick trick. Haven't tried it yet...anyone who does let me know how it worked!
If you literally "checked" them, meaning the checkboxes, that only affects their visibility. To remove them, select one and then click on the "minus" part of the "plus minus" at lower left.
Doug -
Possible fix for Adobe PDF plug ins (Safari & Print) on Snow Leopard
I think I just discovered a "fix" for the Adobe PDF problem, as well as for some other miscelanious problems with Snow Leopard applications. I found the fix for the plug in from PDF on Adobe's website. http://kb2.adobe.com/cps/509/cpsid_50983.html
Following these directions (changing the option from 64-bit, to 32-bit when the application loads), seems to have cured the plug-in for PDF from Adobe and loads the plug in properly.
There is a link, http://kb2.adobe.com/cps/512/cpsid_51248.html for changing the settings similarly for Automator to fix the "save as PDF" in Print.
I've also applied this "suggested fix" to Mail and Address Book, to see if it remedies some of the continued glitching and crashes on my iMac, even after the latest update (10.6.1). No problems with my PBG4, as it's not Snow Leopard nor Intel.
Hope this solution is useful.I am having the same problem from CS4 Illustrator
cups/error_log shows:
D [10/May/2010:10:53:31 -0700] [Job 87] Opening Distiller
D [10/May/2010:10:53:31 -0700] [Job 87] Starting Distiller job
D [10/May/2010:10:53:31 -0700] [Job 87] Distiller child 26366, exited with status 0
D [10/May/2010:10:53:31 -0700] [Job 87] End of messages
D [10/May/2010:10:53:31 -0700] [Job 87] printer-state=3(idle)
D [10/May/2010:10:53:31 -0700] [Job 87] printer-state-message="/usr/libexec/cups/filter/pstops failed"
D [10/May/2010:10:53:31 -0700] [Job 87] printer-state-reasons=none -
IChat 6 changed group name to Facebook but keeps reverting to Buddies, an fix for this?
I want the group "Buddies" to be named "Facebook", I have no problems changing it, it just won't stick for more than a few minutes at a time before
it reverts back to "Buddies" again.
I find this very annoying, is there a fix for this?
NB: I have tried pretty much everthing I can think of, I hope someone here will have the answer I'm looking for.
TIA
andrewHi,
Most likely this is a second Login issue.
It can depend on where you are logged in and with what app and the abilities and priorities that login has ((which somewhat depends on Screen Name /Buddy list type)
AIM Accounts (Any Screen Name that logins in to AIM)
These can have Multiple Logins including a web Log in (web SIte) an AIM Express login, another App and /or another computer. (The web site Login could have default Login period as long as two weeks if you don't specifically Log Out)
So in this case when you change anything via one login the other "Corrects it" due to the constant feedback for both logins.
One Exception if the "Group" called Recent Buddies
In iChat 4 and Above this "group" can be turned On or Off display-wise in the Accounts part of the iChat Preferences.
It holds names of people that have contacted you that are not in the Buddy List itself.
The List is held at the AIM servers and you only have Read Access (You cannot delete people from this list unless adding them to the Buddy List itself)
It used to be possible to Delete the whole group but I have not tried this for a while (Since iChat 3)
I have not tried to rename it but I doubt that it can be.
Multiple Login Effects
When you login in to AIM twice, particualrly in iChat on two computers or Different apps on the same computer, you have two Buddy List telling the AIM servers who is in the Buddy List and what the groups are that they are in.
Although Adding something is easy and will appear in the other Buddy List (such as a new Buddy or a new Group) editing Groups or deleting Buddies is almost impossible.
Jabber Acounts (Facebook, Google and other Jabber Logins)
Logging in to the Google Site (the Gmail Web page or iGoogle pages) where chat is available has the same priority as the iChat App. Whichever was the last login will then tend to take preference.
Most Jabber apps can alter the Priority
This measn your Home computer, Work Cmputer and phone for instance can have different priorities set so messages get sent to the "right" one at the right time.
If your Login is not the highest Priority one then you are unlikely to be able to edit any Group names or Delete Buddies.
Obviously for most people with Google IDs the issues is being logged in to the web site.
As Facebook is also a Jabber server with a web site login available this should be considered as well.
Check both Google and Facebook's default Login time if you don't ever Log Out as a specific action.
(Quitting the page does not Count)
Very few Jabber servers have Web Site Logins (Jabber Australia does as the only one I know of).
I am not aware that you can access the Chat options from those that do (check them individually)
However second logins via Adium or ProteusX may well effect things if they are set to higher priorities.
8:51 PM Thursday; August 18, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb( 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
Hi all... My mid 2010 MacBook Pro took a keyboard spill. It still works but the display is very very dark. A faint image can only be seen at an angle in very bright light. I think this model has an LED screen. Can anyone please tell me what the fix for this is? Thank you sooooo much!
< Email Edited By Host >Spill Cleaning
Some liquid has just spilled into your Mac. What should you do?
Do
Immediately shut down the computer and unplug the power cord.
Remove the computer's battery (if you can)
Disconnect any peripherals (printers, iPods, scanners, cameras, etc.)
Lay the computer upside down on paper towels to get as much liquid as possible to drip out.
Note what was spilled on your Mac.
Bring the computer into an Apple store or AASP as soon as possible.
Don't
Don't try to turn it back on. Liquids can help electrical current move about the components of your Mac in destructive ways.
Don't shake the computer (this will only spread the liquid around).
Don't use a hair dryer on it (even at a low setting a hair dryer will damage sensitive components).
Maybe you are looking for
-
Excel 2007 .xlsm Application compatable with Windows 8.1
I have finely lost the plot, for weeks I have been trying to load an Excel macro .xlsm file created on a Windows 7, with Office 2007 Professional on to a brand new computer running Windows 8.1 with Office 2007 Enterprise. on opening the file in Excel
-
Hi, I am using Adobe Acrobat Elements 7.0 in my computer to convert files like .txt and .doc to .pdf files. But currently I'm facing a problem with the converted .pdf file size. For example, my .doc file is 5MB and after I convert to a .pdf file, it
-
HT201263 waited almost 48 hours and need to use the iphone
i press erase all settings and contents, the loading circle is only appeared and waited for almost 48 hours. i wonder what i have to do since my lock button is no longer useful?.any help?
-
HOw am I supposed to use iTunes when it just locks my account every time try to buy a song or something
-
FaceTime only works dialing via e-mail
Hey, I'm wondering why my iPhone 4 can only facetime via e-mail and not using its mobile phone. I don't even have that option enabled on my iPhone since when I go to facetime's options, it only shows that I can be called via e-mail. At first I though