Possible entries restrictions problem..
Hello~
I have a problem with 'F4'.(ECC6)
When I use F4 on fields and then clicks arrow to show restrictions criteria,
I can't input on any fields. They seem to be enabled, but does'nt work.
But after clicking show/hide arrow twice(first hide, then show again), input becomes to be possible.
What is the problem?
Hi ,
Are you using the 'AT Selection-screen' and 'AT Selection-screen Output ' events properly .
Can you show us yr selection screen part of code ..
Regards,
Rajesh Kumar.
Similar Messages
-
Select-options restrict possible entries
Hi
I use select options like in this example
select-options: so_matnr for mara-matnr.
In my report,when running, if pressing f4 for possible entries i only want to have material 123 and 234 for example,and not the whole list of materials.How can i restrict this possible entries to only my desired materials.
thanksHi Seba,
1. Demo program for F4 help on Selection-screen : <b>demo_selection_screen_f4.</b>
2. Sample program
REPORT zvenkat_f4_for_selops MESSAGE-ID zmsg .
TABLES :marc.
TYPES:
BEGIN OF t_t001w,
werks TYPE t001w-werks,
name1 TYPE t001w-name1,
END OF t_t001w,
t_return_tab TYPE ddshretval.
DATA:
w_t001w TYPE t_t001w,
w_return_tab TYPE t_return_tab.
DATA:
i_t001w TYPE STANDARD TABLE OF t_t001w,
i_return_tab TYPE STANDARD TABLE OF t_return_tab.
*& SELECTION-SCREEN
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
SELECT-OPTIONS : s_werks FOR marc-werks.
SELECTION-SCREEN END OF BLOCK b1.
*& AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_werks
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_werks-low.
PERFORM f4_help_for_palant USING 'S_WERKS-LOW'.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_werks-high.
PERFORM f4_help_for_palant USING 'S_WERKS-HIGH'.
*& Form f4_help_for_palant
FORM f4_help_for_palant USING l_dynprofield.
SELECT werks name1
FROM t001w
INTO TABLE i_t001w.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'WERKS'
dynpprog = sy-repid
dynpnr = sy-dynnr
dynprofield = l_dynprofield
value_org = 'S'
TABLES
value_tab = i_t001w
return_tab = i_return_tab
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " f4_help_for_palant
I hope that it solves your problem.
Thanks
Venkat.O -
Is it possible to restrict printing via e-mail to one or a few domains?
Regarding HP ePrinting
Per default any emails will be printed, it is possible to restrict to certain e-mail addresses
Is it possible to restrict print per e-mail to a domain or a few domains, to get a better security and a more simple administration?
example:
e-mail addresses: [email protected], [email protected] ... etc.
Rule in HP ePrint: *@mymaildomain.comHi,
It is possible to restrict printing for allowed senders only,
You will have to add any email you would like to allow accessing, adding a bulk domain nake is not possible..
ePrintCenter lets you control who can e-mail print jobs to your HP product from mobile or network connected devices. Follow these steps set your ePrint-enabled product to receive print jobs from allowed senders only.
Log into your ePrintCenter account at HP ePrintCenter .
On the ePrintCenter Printers page, click ePrint Settings . The ePrint Settings window opens.
On the Allowed Senders tab, select Allowed Senders Only , and then click Save .
Type an allowed sender's email address in the dialog box, and then click Add Email . The email address is added to the Allowed Email Addresses list.
NOTE:You may specify up to 500 e-mail addresses allowed to send print jobs to your product. Your HP product ignores e-mail from addresses not on your allowed senders list.
(Optional ). To send a confirmation email to the sender after the ePrint job prints successfully, select the check box next to the email address in the Email job status column.
NOTE:To remove an email address from the Allowed Email Addresses list, click the X next to the email address in the Remove column.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
How can I define the possible entries for "invoicing process" at fkkinv_ma?
At the transaction code fkkinv_ma, I fill in the fields "Date ID" and "Identification" but I have a problem with the field of "Invoicing Process". When I psh theF4 button, there comes no search help. What should I do? Should I define the possible entries first? If I should, how can I define the possible entries for "invoicing process"? How is the customization done?
Thanks in advance for the answers.You have to define them in the IMG
Financial Accounting (new)
Contract Account Recievable and Payable
Business Transactions
Invoicing
Invoice Types
You have to set up a number range, decide what type of Financial transactions should not be invoiced -- like Dunning Charges
then you have to have a developer create the form and form class of invoice. -
Buffering not possible, transport restricted
hi,
i am creating ztable. i have domain of type int4. my primary key refers to this domain. while compiling, i get a warning - "Key Field ZZ has num field of type INT4. Buffering not possible, transport restricted".
what does this mean? will i have any problems while transporting to QA and Prod. and Buffering?
JData Types for a Characteristic Object:
CHAR
NUMC
DATS
TIMS
Data Types for a Kef Figure Object:
Amount
Quantity
Number
Integer
Date
Time
You should use characteristic data types while using key fields for a buffered table. If you use NUMC , it will work.
regards,
preet -
When in a hierarchy, a user right clicks on a node to crate a new node, he has two options
-Child
-Sibling
Is it possible to restrict the user from creating a sibling and allow him to ONLY create child nodes?
Business cases:
1. different level nodes need to have different prefixes.
- Thus, the default prefix property definition uses the level number to assign a prefix
- Also, a validation, to ensure the correct prefix, uses the level number
But if the user can create a child and a sibling then the default prefix will only be right for a single case and not both.
ThanksIf the images are exactly the same size then make sure the layer with the mask
is the active layer and in the other documents go to Select>Load Selection and choose
your document with the layer mask under Source document and under channel choose the layer mask.
After the selection loads press the layer mask icon at the bottom of the layers panel.
MTSTUNER -
Is it possible to restrict access to specific IOS apps based on the WIFI profile that a user has connected to?
you might be able to block it if the app uses Internet access
and depending on your wireless you might be able to block a specific user
accessing the backend host that the app uses
some firewalls offer application filtering but I'm not aware of any that work with ios apps -
IS IT POSSIBLE TO RESTRICT A PARTICULAR MATERIAL GROUP FOR A USER
Hi Gurus,
I want to know whether it is possible to restrict a particular material group for a particular user.
e.g Material Group : 101
User : ADMIN
Our requirement is that the user should not be able to select material group 101 in
any stock related transactions. e.g MB5B, MB51, etc.
Thanks
AmolHi Amol
You ca try Tcode OMT3E where in u can maintain settings relatesd to Users.
Regards -
Is it possible to restrict copying and printing a pdf?
Is it possible to restrict copying and printing a pdf without setting a password? I just want to restrict using the document, but don't want a password-demanding window to pop up.
Hei guys!
I truly need your reply!
Any reply or a hint or a reference to another application is welcome.
Thank you! -
Transaction F110 - Possible to restrict the input of Identification-field?
Hello all,
is it possible to restrict the input of the "Identification"-field in transaction F110 (Automatic Payment Transactions: Status)?
e.g.: User X with company code XX is only allowed to enter XX01 in the identification field.
User Y with company code YY is only allowed to enter YY01...
Is that possible?
Thanks in advance for any reply!
Steffen
Message was edited by:
Steffen PoetschHi
You can control the "identification" with the help of the BASIS guy.
They will define the authorization object to field level.
Create seperate roles for that and assign accordingly
VVR -
Hi
DECLARE @XMLA nvarchar(3000)
, @DateSerial nvarchar(35);
-- Change date to format YYYYMMDDHHMMSS
SET @DateSerial = CAST(GETDATE() AS DATE);
--SELECT @DateSerial
Set @XMLA =
N' <Batch xmlns="http://schemas.microsoft.com/analysis services/2003/engine">
<ErrorConfiguration xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2"
xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2" xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200"
xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200">
<KeyErrorLimit>-1</KeyErrorLimit>
<KeyNotFound>IgnoreError</KeyNotFound>
<NullKeyNotAllowed>IgnoreError</NullKeyNotAllowed>
</ErrorConfiguration>
<Parallel>
<Process xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2" xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2"
xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200" xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200"
xmlns:ddl300="http://schemas.microsoft.com/analysisservices/2011/engine/300" xmlns:ddl300_300="http://schemas.microsoft.com/analysisservices/2011/engine/300/300">
<Object>
<DatabaseID>MultidimensionalProject5</DatabaseID>
<CubeID>giri</CubeID>
<MeasureGroupID>Fact Internet Sales</MeasureGroupID>
</Object>
<Type>ProcessFull</Type>
<WriteBackTableCreation>UseExisting</WriteBackTableCreation>
</Process>
</Parallel>
</Batch>';
EXEC (@XMLA) At SHALL-PCAdventureWorksDw ;
iam executive the query when iam getting below error.
[Execute SQL Task] Error: Executing the query "DECLARE
@XMLA nvarchar(3000)
, @DateSerial nvarch..." failed with the following error: "Incorrect syntax near '-'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set
correctly, or connection not established correctly.
how to solve this error;
please help meWhat are you trying to do? What sort of data source is SHALL-PCAdventureWorksDw?
When you use EXEC() AT, I would execpt to see an SQL string to be passed to EXEC(), but you are passing an XML string????
If you explain why you think this would work in the first place, maybe we can help you.
Erland Sommarskog, SQL Server MVP, [email protected] -
IW37: Status DSIG missing from possible entries
Hello all.
Does anyone know how to include system status DSIG (Digital Signature Set for Order Operation) in the list of possible entries for the fields "Status inclusive" or "Status exclusive" on the IW37 selection screen? It seems to be excluded for some reason. I've searched OSS and came up empty.
Thanks!
PaulHi Pete.
If I manually enter the status in the selection field, the filter works as it should. Our users need it in the search help list though, so I guess I'll log something with OSS. Thanks.
Paul -
Is it possible to restrict the object creation for stateless session beans
Hi,
Is it possible to restrict/fix the ejb object creation for stateless session beans in application server?
For example, i want to configure the application server ( am using JBOSS ) to create maximum of 10 session bean objects. and if any requests for the stateless session bean come, as application server has created 10 objects, the requests should be blocked.
Thanks in advance,
nvseenuYou can keep a counter in the application code. A static var won't work, but an entity and a consistent id should. This version would affect performance, but it would be portable to other app servers.
// ConstrainedBean.java
package unq.ejb;
import javax.ejb.Stateless;
import javax.ejb.CreateException;
import javax.annotation.PostConstruct;
import javax.annotation.PreDestroy;
import javax.persistence.PersistenceContext;
import javax.persistence.EntityManager;
@Stateless
public class ConstrainedBean implements Constrained {
final static int DEFAULT_COUNTERID = 1;
@PersistenceContext EntityManager em;
@PostConstruct
protected void init() throws CreateException {
ConstrainedBeanCounter counter =
em.find(ConstrainedBeanCounter.class, DEFAULT_COUNTERID);
if( counter == null ) {
counter = new ConstrainedBeanCounter();
counter.counterId = 1;
counter.counterValue = 0;
em.persist(counter);
if( counter.atMaximum() ) {
throw new CreateException("error attempting to create > 10 beans");
else {
counter.increment();
@PreDestroy
protected void destroy() {
ConstrainedBeanCounter counter = em.find(ConstrainedBeanCounter.class,
DEFAULT_COUNTERID);
counter.decrement();
public void doSomething() { System.out.println("doSomething()"); }
// ConstrainedBeanCounter.java
package unq.ejb;
import javax.persistence.Entity;
import javax.persistence.Id;
@Entity
public class ConstrainedBeanCounter implements java.io.Serializable
@Id public int counterId;
public int counterValue = 0;
public void increment() {
counterValue++;
public void decrement() {
counterValue--;
public boolean atMaximum() {
return counterValue > 9;
} -
Is it possible to restrict Revoke of TECO/DLFL in CO02?
Hi everyone!
In our system, we need to implement a rule that users can TECO and mark del. flag production orders (TCode CO02) but they should not be able Revoke it.
I had already checked in activity groups (user administration) but I can only restrict Change completely.
Is it possible to restrict like this? Or can I totally remove the Revoke options in CO02?
We use SAP R/3 (4.6B). Thanks a lot!Hi RICARDOJR
lease Try the below settings
1.Goto BS22
2.Select the system status TEC0 (I0045) & just duble click it,
3.Maintain the Revoke technical completion (BUTA) =Forbidd (not allowed),
Now system will give the error message when u revoke TECO status at CO02.
And also for DLFL (DELTION FLAG ) (I0076)
Maintain the Remove deletion flag (LVMZ) =Forbidd (not allowed),
Now system will give the error message when u revoke DLFL status at CO02.
Please try & if u found useful reward and close the thread
Regards
Pradeep -
Time manageru2019s workplace -No possible entries help available for this time
Hello Experts,
I am configuring time manageru2019s workplace.
I can insert an employee , I can see his detail, planed schedule of time, but I cant change its TIME ID it is showing there like ?03 ( No possible entries help available for this time data ID )
I have configured Time IDs also accordingly.
I used definition set SET_BE
And subsets P,Q,R
I created time data IDs A- Absence ,B- Avilability ,U-Leave
Please let me know where I am going wrong.
Thanks and Regards
Jaydeep JadhavHi,<br>
Recheck all the nodes under TM->TMW. If you have maintained groups , please check them.
Also request the abaper to debug and find which query is failing.
Good luck<br><br>
Thanks,
Amosha
<br><br>"Known is a drop & unknown is an OCEAN!"
Maybe you are looking for
-
TS1646 Failed download charges-refund
My son kept bugging me to download an app after it failed, so I tried several times not thinking I would be charged unless it really downloaded. The first charge was refunded after I "reported a problem" on the app store, but when I tried for the oth
-
my appleworks continues to crash after I have trashed both preference files. Can I trash the 6.2.9 in osx and then install the appleworks which came with the ibook ( it was in os 9 ) and then update to 6.2.9 ?
-
How do I preserve my URL links?
I am working on a project that has some embedded URLs that are linked to buttons on the navigation bar. They work great in preview mode, but when I publish, they dont work. The buttons work, but nothing happens. Help!?
-
Hi, Although I'm able to reboot my router using Telnet, like so: localhost:~ eb$ telnet 192.168.1.1 Trying 192.168.1.1... Connected to 192.168.1.1. Escape character is '^]'. Password: ****** Copyright (c) 2001 - 2006 TrendChip Technologies Corp. tc>
-
When will firefox 4.01 be compatible with McAfee Site Advisor?
I get pop-ups offering the latest version of Firefox (4.01) but when I go to install it, it warns me that my McAfee Site Advisor will not work with this new version. Can you tell me when you expect the new version of Firefox to be able to support use