Possible help

Possibly helpful. Having problems getting PDFs to download and freezing I started getting deeper into things. Using that below I found the PDF I wanted downloaded was being download even though the KB number shown was froze. After 2 or 3 minutes the 900 KB displayed fully. Okay, I'm on Dial Up and things are slow. Today I the phone company test our phone line and reported it good. I contacted the answering service for our Internet service and related of what I found. He has yet to return my call.
Here's something I found;
1 - Can do this after #5. Start downloading anything, especially PDFs of fair to large size.
2 - Click Control Panel
3 - Click Network and Sharing
5 - Click View Status - Connection Service should display
6 - In bottom half, under activity is sent / received and showing if receiving - numbers changing
7 - In bottom right hand corner is Tab "diagnose." Click it.
Doing such I found my Sever may be my problem. I took a Snap Shot of the Diagnose msg. Don't know of fast way to insert picture, but here is the msg. I got;
Can not communicate with DNS server (198.88.216.2).
Network diagnostics pinged the remote host but did not receive a response.
Windows found a problem that can not be repaired automatically.
Contact your Internet service provider or network administrator for help or click here for information about things you can try to help resolve the problem.

If you want someone from Linksys you have to contact their support. This is only community.

Similar Messages

IPhoto update can't be installed on my MAC ref. "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled." this is not possible help?

Recent upgrade to OS X Yosemite on my MAC and iPhoto update can not now be installed msg reads, "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled." this is not possible help?

That error message can be misleading. It means, that iPhoto on your Mac is not associated with your Apple ID.
Either you did not set up your Mac using the same Apple ID - did someone help with your setup and use a different ID? Perhaps a family member? Or did you let someone borrow your installer disks?
Or did you not yet "Accept" iPhoto and other iLife apps to your Apple ID? Check the "Purchased" tab of the App Store, if any applications are waiting to be accepted. If you see "Accept" buttons, press them.
You may be unable to "Accept" now, if you missed the update to iphoto 9.5.1 on Mavericks. You could try to buy iPhoto, however. If you are lucky, it may show for free.
Backup your iPhoto library, if you do not have a current backup.
Uninstall iPhoto by deleting it from the Applications folder, but do not empty the Trash, so you can put it back,if need be.
Launch the App Store, click the "Store" menu, and sign in with your current AppleID.
Open the main page "Featured" of the App Store and search for iPhoto.
If iPhoto is listed as "Free", click the "Free" button to buy it with your current AppleID.
If it is not showing as free, there is no help but contacting the App Store Support to sort out the AppleID. Use this link: http://www.apple.com/support/mac/app-store/contact/

Imessaging doesnt work after iOs 6 update, can't send or recieve messages. it isnt the wifi since everything else is working. have tried every solution possible. help?!

imessaging on ipod touch doesnt work after iOs 6 update, can't send or recieve messages. it isnt the wifi since everything else is working. have tried every solution possible. help?!

Short of a reset to factory settings I've found making sure iMessaging is not left minimised helps. It doesn't seem to keep its connection. So, by closing after each use this helps. I've been doing this since I logged out of iMessaging at least 1/2 doz times and even changed my apple id pw as this had ceased to be recognised. I get fewer send failures now and don't have an inactive send button so much. Having said this its all a bit of a work around as iMessaging isn't behaving as it once did. If over time not resolved will do factory reset. All the best.

Possible help I bought this iPhone, and after that I told him and lock

Possible help I bought this iPhone, and after that I told him and lock, and I went to a companions did not know what should I do help me
<Personal Information Edited by Host>

If you are trying to activate an iPad or iPhone and it is asking for a previous owners Apple ID and password, you have encountered the Activation Lock. This is a security feature that prevents thieves from setting up and using a stolen or lost iPad or iPhone. You have no alternative. You must contact the previous owner to get permission to use the device. If you cannot contact the previous owner return the device to where you bought it and get a refund. You will never be able to activate the device and no one can help you do it.

Roll-up not possible - Help

Hi,
COPA delta load is successfully loaded in to the data target, some how i am getting the following error message and Roll up failed for the last two times.
Roll-up not possible; no filled aggregates available
Issue happend in Production, Could you please help me, to complete the roll up for the last two requests, which is loaded without any error into the target.
Thank You
Senthil

Hi Raj,
Sorry, There is an aggregate available for the data target and half a million records loaded to the target in the past two requests.
Anyway thanks.

Looking for best DVD quality as possible - help please !!!

Hello All
I have some footage ( 55min ) recorded on a Sony Z1 - HDV 1080 60i - 16:9 and edit on FCP. I exported the file on the same setting. Then sent to compressor to creat a DVD on DVD SP. I dont wanna let DVD SP encode the files, even because it will not accept files on HDV to autoring a SD DVD.
Whats the best settings I can get to produce the best quality dvd as possible.
What I did is use the DVD Best quality 90 min and raised the bit rate to its maximum - 7.7 or so. Is there a better way to do it or should I choose a different setting.
Hope I could make myself clear.
P.S. - Sorry for English.

Hi
I think that the following tutorial will help you: [Exporting HDV Video from the Timeline to Standard Definition DVD|http://www.kenstone.net/fcphomepage/hdv_timeline_to_sddvd.html].
You need FCP 6 (FinalCut Studio2) ti use ProRes codec.
PS: Sorry for my english ... I'm from Argentina !
Hope that helps !
Alberto
Message was edited by: Silal

JavaScript (Possibly) Help

Hello all.
I need help on a simple script!
Basically, I’m trying to make a very easy way to create
an automated TEXT menu/index page that builds when a file is added
within the same directory. So in theory, if file XXX.swf is added
to a folder (root directory of index document), it will be
displayed as a ‘_self’ text link, that is styled with
CSS, when the said document is opened – alphabetically I
guess (file name and extension would be fine).
It seems simple in my mind, but wouldn’t be surprised
if the code is a bit lengthy, so even if anyone knows of a
tutorial, a link would be most appreciated.
Many thanks,
Lucy

On Fri, 8 Dec 2006 04:50:06 +0000 (UTC), "Lucy Xerge"
<[email protected]> wrote:
> Basically, I?m trying to make a very easy way to create
an automated menu that
>builds when a file is added within the same directory. So
in theory, if file
>XXX.swf is added to a folder (root directory of index PHP
document), it will be
>displayed as a ?_self? link when the said document is
refreshed ?
>alphabetically I guess.
Try this test page (I use jpg images because I don't use
Flash menus
and have nothing to test with):
i) Open up a new .php page and above the DOCTYPE put in this
code:
<?php
function get_menuarray($this_subdir) {
$menufiles_array = array();
if (is_dir($this_subdir)) {
if ($dh = opendir($this_subdir)) {
while (($file = readdir($dh)) !== false) {
if (is_file ($this_subdir."/".$file) &&
eregi("\.jpg",$file)) {
$menufiles_array[] = $file;
closedir($dh);
return $menufiles_array;
?>
ii) NOTE: if you want to use .swf files just replace the
reference to
.jpg in the above code
iii) Put this in the the body of the page:
<table width="100" border="0" cellspacing="1"
cellpadding="0">
<?php
$myMenu = get_menuarray(menufiles);
foreach ($myMenu as $value) {
$tmp = explode(".", $value);
$thisLink = $tmp[0].".php";
echo "<tr>";
echo "<td><a href=\"$thisLink\"><img
src=\"menufiles/$value\"
alt=\"\"></a></td>";
echo "</tr>";
?>
iv) In a folder called menufiles put in your menu images (or
swf) - I
named mine a.jpg, b.jpg etc
v) Run the page. You'll see it makes a table with jpg menu
items and
autolinks them to a page with the same name as the menu
image. eg
a.jpg links to a.php, b.jpg links to b.php etc
I have zipped my test files here if you want them:
http://www.flyingtiger-dev.com/automenu.zip
I am not suggesting this is in any way a definitive solution
- it is
of course quite limited - but it should set you on the right
track.
Hope this helps.
Steve
steve at flyingtigerwebdesign dot com

Could this possibly help with Flash Player 11 problems?

Well, I discovered that Windows 7 did not automatically update to the service pack 1 and after problems working to get that to happen ( missing and corrupted files) I think that Flash player 11 maybe working correctly, could that be possible?

That is a difficult question to answer, since we don't not how it was not working correctly.

Possible help me

I forgot confidential questions
No longer have access to email Alternative
Please help me quickly

See Here > Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...
Or Email Here > Apple Support iTunes Store Contact
More Info > Apple ID: All about Apple ID security questions
Note:
You can only set up and/or change a Rescue Email BEFORE you forget the questions/answers

16:19 to QuickTime, not possible- Help

Hi there, I've just edited a sequence using the Anamorphic DV PAL preset. now Now, I'm unable to get 16:19 quicktime movie, No matter what codec i use, I'm always getting a 4:3 QT movie!
Am I missing something here?

Where is the final destination of your movie?
Web?
DV tape?
Theater?
Why do you want to save it on your HDs as 16:9?
These are very important questions!!!
If you are saving it for the web... here's what I suggested above:
1) File
2) Export
3) QT COnversion
4) Format: Quicktime Movie
5) Use: Broadband - High
6) OPTIONS
7) SIZE
8) USE CUSTOM SIZE
9) Enter in your custom size.
Good luck,
CaptM

Exporting in the best AVI format possible. help

So I need to export my project in AVI format. Ive already done it once and it looks really bad, quality seems to be low even if I put it on best. Everything was turned up. Dont really know what im doing wrong. The footage was shot in HD 10-bit NTSC 720x486 4:3
Can anyone walk me threw what they do when they want to export at the best AVI quality??

JustADude21 wrote:
The client wants AVI format. I told them QT is better and more used. They also want a mpeg format.
Dimensions: 720x486
You can ask what clients want and you can explain why you can't do it for them but it's impolitic to tell them they don't know what they want. There is nothing better about QT nor is it used more. AVI persists in spite of the fact it has been dead for more than 15 years.
MPEG? 1, 2, 3, or 4? You must find out.
Your video dimensions indicate standard definition DV. The AVI export out of FCP or Compressor is lovely on my systems which suggests you may be viewing it improperly.
bogiesan

V200: Possibly helpful hint regarding reloading firmware and reformatting data a

Hi
I have a GB MuVo V200 (firmware .0.03e) and I decided to reload the firmware
from the NomadWorld web site to put plain old version .0.03 (no 'e' at the end)
I eventually got this to work, but not at first. Here's an account of what happened.
However, first I tried to install the firmware .0.03 that I got from the Creative.com
website. See http://www.europe.creative.com/support/downloads/
I got the version for WinXP as I wanted to do this from my PC at work.
I tried to do it and it seemed to go OK. note I also chose to REFORMAT DATA AREA at the
time of reflashing my firmware. Anyway, I then transferred an MP3 to my MuVo and
tried to use it. However, the MuVo said No Music when I poserd it up. I then checked
the Muvo on my PC and on the removable dri've the mp3 file had been removed from the muvo
by the Muvo itself it seems! However, it did keep the folder, namely U2.
For the technical among you, note that the the REFORMAT DATA AREA did correctly
produce a FAT6 partition table on the MuVo starting at sector 45 (It seems that
the MuVo RESERVES the first 44 sectors, about 0.03MB) of the GB disk dri've for its
own use. I think in this reserved area there are some important files and the all
important Root folder! For some reason this Root folder was not getting put on there
I believe.
Anyway, I eventually fixed the problem in this way.
I went home and decided to load the firmware v.0.03 that I downloaded from NomadWorld
I did this using my Windows 2000 PC (on which I previously installed the CD
that came with my MuVo) and this worked. Yes, I also chose to reformat the
data area at the same time (i.e. I checked the box for this and then clicked START.)
The only differences between my home and work PC are:
. Work PC uses WinXP but home PC uses Win2000
2. I had previously installed the MuVo CD-ROM that cam with my MuVo on my
home PC, and then I installed and ran the firmware exe program from the
internet.
Point 2 is important I feel.
My GUESS is that there _may_ be some all important drivers or something loaded
from the original CD ROM which the firmware updater program needs in order to correctly
put files/data such as the Root folder into this RESERVED AREA of 0.03 MBytes
at the beginning of the GB flash dri've. The Microsoft Windows FAT reformatting
program will not and cannot touch this reserved area, since all Windows sees is
the actual FAT partition of the disk, which starts at sector 44. If can happily
reformat this disk partition to FAT or FAT32, but it cannot do anything more thatn this.
So, if you're having problems with reformatting or reflahsing the firmware, make sure
you have first installed the Installtion CD-ROM that came with you MuVo.
Hope the above is of some use to someone.

I do not own a V200, but a TX FM 52MB which is similar to the V200.
I never installed a driver from Creative using WindowsXP and the firmware-flash worked several times, with and without the "format data area"-option.
So you are right, the problem is not the operating system.
I used an old mp3-flashplayer before, that sometimes crashed because of electric discharges.
Sometimes after a crash the device used to delete files that I recorded with the microphone, as soon as I plugged it into the USB-port.
Everytime this happened I had to reformat it. Other files were not deleted, just all in the "Voice"-folder.
It was a "Jamba mystic U 00 28MB" that used a Sigmatel-chip. The creatice-players (at least the TX FM) use sigmatel as well, just the newer version.
So there are similarities between your experiences and mine. In both cases the filesystem got messed up and the player deleted files.
I did not have a crash or a disappearing file with my TX FM until now.
bye, elmulti

Possible Memory Leak... Real problem. Please Help

Hello,
About a couple of months ago I started getting a little concerned with my MacBook Pro's Hard Drive space, I deleted a bunch of stuff, after noticing I only had less than 1 Gb left, then I purchased an external HD and have used it to back up, and also to remove stuff from my hard drive in the computer. But now, I have noticed a problem that rather concerns me, If I put my computer to sleep after a normal day of work, and usage, when I wake it up it seems fine, and it runs about the same (a little less efficient, but not too much) then I realize that I am missing about 1-2 Gbs in Hard Drive Space. If I restart the computer, That memory comes back... and then If I keep using the computer, it leaks memory little by little.
I have tried running anti-viruses and spyware software but that does not seem to work against this issue, unless I am doing something wrong. I have also tried to update all my software and keep my processes and running applications to a minimum. Finally, I tried leaving the computer on... without doing anything, connected to the internet... It leaked some more memory. I did the same, but without the internet... and then it did not leak anymore. I have no clue how this happen or how to fix it. I have tried most of the things I know could have possibly helped, but seems like isolating the problem to the internet does not really help me, since I need it for work.
I would appreciate any suggestions or help, Thanks!!

You are describing the natural process of virtual memory and Apple's use of a sleep image. Look in /var/vm for these files. It is not uncommon to have a sleep image of a couple of GB. Think about it. You have a computer that has data on a hard drive. When you start up the machine, that data needs to move from the hard drive to RAM and then, in some cases, back to the hard drive as virtual memory. This is when you do not have enough physical RAM to hold everything you are doing. Now, what happens when the machine goes to sleep? Well, you have data in RAM that in most cases will remain there as long as there is power. On a laptop, it is possible for the contents of RAM to be written to a file in the event of a battery depletion. THis is the suspended hibernation feature that Apple has. Commonly, there is one swapfile and one sleepimage file located in /var/vm.
If you are missing a lot of space, you might instead want to check out your log files. It is possible that something caused a high number of log entries to be recorded and you have an incredibly large log file. Also, if your machine is not running between 3 and 4 a.m., you are missing the default maintenance scripts that run and rotate log files. Look in /var/log for unusually large logs.
Hope this helps.

Photoshop is opening multiple times...WHY??? (please help).

When I double click on an image (from Bridge for example) to open in Photoshop it will open up CS6 and then sometimes when I open another image, instead of opening up in the same open Photoshop program, it will open up an additional Photoshop program. Both CS6, Version 13.0.6 x64. Super frustrating when sitting with a client and trying to add an image to a document and it opens up in a different program... Is there a way to see where Photoshop is opening from? Why would CS6 be opening multiple times???
I don't think I noticed this happening before I upgraded to Mavericks (yes, this has been happening for a while). I also have a back-up program called SuperDuper that mirrors my system on a separate hard drive. Could Photoshop be opening from there, too?
Thanks for any possible help!
Deron

Use Lion Recovery to reinstall the Mac OS X.

Program error please help me

I have been using PS elements 8 on for a year with no issues, yesterday when I tried to save for web after editing I got this message:
Could not complete the export command because of a programme error.
I then downloaded a trial of PS elements 9, but the same thing happens with this also.
I have done the shift,control, alt on PS start up on both elements 8 and 9 but the problem still remains, I have also upgraded windows vista today hoping that would solve it and then repeated the shift,control, alt on PS start up but it still is not fixed. I have run all comprehensive norton scans and fixes but nothing.
Please is there anybody that can help me, I am not a techy and I need things explained to me very simply. Thank you to anybody in advance that could possibly help me.

It’s possible this is a Windows Vista problem, notably 64 bit, rather than an Adobe problem.
Are service pack’s 1 & 2 installed?
Has the registry become corrupted?
Have external or removable drives been used for saving files?
When examining the registry it sometimes points to a drive that has been removed, is unplugged or otherwise not functioning. The save for web plug-in remembers the last save location which should ideally be on one of the partitions on the main machine.
It might be worth checking the registry but I would only advise amendments if you know what you are doing. The conventional set up pointing to root media directories should be like this:
My Music REG_EXPAND_SZ %USERPROFILE%\Music
My Pictures REG_EXPAND_SZ %USERPROFILE%\Pictures
My Videos REG_EXPAND_SZ %USERPROFILE%\Videos
Personal REG_EXPAND_SZ %USERPROFILE%\Documents
etc.
You can check this by clicking the start button and typing regedit in the search box. Click on the resulting file to open the Registry Editor dialog and agree administrator permission if necessary. On the left click on the folder:
HKEY_CURRENT_USER and navigate to User Shell Folders
The full path is:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders

Possible help

Similar Messages

Maybe you are looking for