Possible Messages that will prompt when we do CO54 and COR2 to TECO the PO
Hi,
We have an issue for a customize program for TECOing process order. This transaction calls transaction CO54 (to send messages automatically) and COR2 to TECO the process order.
The error encounteered by the user is "sending message failed" wherein in fact message has already been sent because TECO box has been marked ok. The error occurs when a user tick the execute button and programs calls the CO54 and CO60 transactions and a message will prompt within the program. Sending of messages has BDC and we are having a problem checking the possible messages that will cause the sending message failed. There are two scenarios we have found. One is when a user is accessing a particular operation in the PI Sheet and another Process Order is being TECOd having the same operation. Another one is the "sent" message that is triggered once message has been successfully delivered.
Hope you could help us with this.
Thank you
-Lyncel
Hi Lyncel,
Please check the Control Recipe Destination settings.
Thanks and regards
Murugesan
Similar Messages
-
How can I set the page that will open, when I open a new tab, to be the same as the homepage?
An app changed it to some other search engine, before installing the app, I the tab that would open was the homepage I set.
In my case it is Google, and I want my new tabs to open on Google like they did before the installation.
thank you,
Asaf Privman.You can middle-click or Ctrl left-click the Home button on the Navigation toolbar to open the Home page in a new tab.
You can look at one of these extensions:
* NewTabURL : https://addons.mozilla.org/firefox/addon/newtaburl/
* New Tab Homepage : https://addons.mozilla.org/firefox/addon/new-tab-homepage/ -
How do I delete my old iMessage email and change to my current one, that Im using when I buy apps and so on. The old one wont go away when I turn iMessage on and of again. pls help
Anyone had the same?How do I delete my old iMessage email and change to my current one, that Im using when I buy apps and so on. The old one wont go away when I turn iMessage on and of again. pls help
Anyone had the same? -
I'm running ios5 on iphone4 and when it goes to sync a message saying will sync when A1630N is available and won't sync. Help
Because either this is not the computer you usually sync with or the apple account logged into in itunes does not match the one on your iPhone.
-
how can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,…"
It sounds like if you open Preferences in Word there will be a place where you can specify where to store autorecover files. Right now it sounds like it's pointing to somewhere that doesn't exist.
-
I am not able to use the ftp export in Muse. When I enter my host, name and password, I get a long interlude of rainbow wheel and finally the message that my ftp host cannot be found. I have verified the name and that it is port 21. I can export to html and use another ftp client to upload (to the same server) but this is tedious and making minor changes is painful. Have you encountered this and found a solution?
Hi Susan,
In that case I will recommend that you consult a local technician/IT team and see if there is some network connectivity issue with your machine.
- Abhishek Maurya -
after downloading osx 10.9.2 when i open my logic pro 9 and begin to audition loops that came with lp9 i get a message that says "audio device has been removed and then a second message the " select driver not found(-10202). my interface is a apogee duet. Can anyone provide a solution to this problem. Thanks
YES!!! YES!!! YES!!!
I got it!!! Yes!!!
Guys, I've solved my problem about that error -10202 (Selected driver not found).
I have installed in my Mac Pro (OS X 10.5.8) a document with an extension ".rsrc" to correct the position of the accents in my keyboard, like acute accent, tilde and circumflex.
That file is called "U.S. - International.rsrc" and it's stored in the following path:
"Macintosh HD/Library/Keyboard Layouts"
So, when it's properly installed, I can choose 2 country flags on the right side of the menu bar (U.S. - International and Brazilian).
That's the clue!
When I pick up "U.S. - International", my keyboard works fine with the accents, >>>BUT<<< Logic Pro 9 doesn't recognize my audio driver; and when I pick up "Brazilian", my keyboard doesn't work with the accents exactly as it shows me on each key, BUT Logic Pro 9 DOES recognize my audio driver.
So, when I want to write anything out, I will pick up the "US - International" and when I want to work on the Logic Pro 9, I will pick up "Brazilian".
I hope I can help all of you.
Regards,
Renato Veiga. -
every time my iphone 4 tries to sync thru wifi a message saying WILL RESUME WHEN a1630n is available
I had exactly the same problem and couldn't find the answer anywhere. However after playing a bit I found out that my computer name (i.e. Right click on "Computer" and select properties) contained a hypen. I renamed the computer to delete the hypen, restarted and now it syncs wirelessly like a charm!
Obviously something that apple overlooked which will probably right itself in the next release but should get you up and running fingers crossed! -
When I try to sync my IPhone 4 over iCloud I get the following message "sync will resume when brian - be9045...is available .
This is preventing me from syncing my iPhone when it is plugged into mains supply and iTunes is on my PC.
Can someone help please?Thank you Carolyn, I understand that and do use the same P/w for both the iphone and the computer and the apps were origionally for the iphone anyway, they just used to back on the computer and now they wont and the imac even cancels them off my iphone when I sync. And it says "Itunes" has made an error, try again...with the coes -54 and -50. This means I canot ack up my iphone properly.
-
When I try to open iPhoto it begins the process and then stops. It brings up a message that iPhoto has quit unexpectedly. Efforts to reopen it bring the same result. My timemachine has been accidentally turned off. I have over 20,000 photos on iPhoto. Help!
First, copy your iPhoto Library to an external so that you have a backup.
Second, see if you can create a new Library and have it open. To do this, open iPhoto while holding down the Option key. It will ask which Library to use, or allow you to create a new Library. Save the new library with a different name from the old one.
If that does open with a new library, the old library is corrupt, but all the files are still OK.
If it is a corrupt Library, iPhoto Library Manager can repair some corruption, or transfer the Library over to a new one. -
I can not dowload the new updated software for my Ipod touch 4G. When i do I get an error message that says Network connection has timed out. I have done the trouble shooting steps. Downloaded the latest version of Itunes, and checked network connection
Disabling the computer's antivirus and firewall during the download and update usually resolves the timeout error.
-
Is there anybody out there who can tell me what I`m doing wrong? I`ve just bought this Ipad1, mostly for the kids to play with, but I still want it to work properly.
I first got the message that apple mobile device wasn`t activated. I did activate, and now I get the message that I have to download a never version of iTunes. The version on the computer is the newest, but what`s on my Ipad? No clue. But it`s updatet to the newest IOS 5, so i guess iTunes is updated too?? Or?
Anything I can do to fix this? It`s pretty annoying if I can say so...!
RegardsThere's a couple of ways to get through to the authorisation controls in the 11.0.x versions.
The control is still in the Store menu, but first (if you're using iTunes versions 11.0.x) you might need to bring up the menu bar to see the Store menu.
If you're using 11.0.x, click on the wee boxy icon up in the top-left corner of your iTunes to see the "Show Menu Bar" control, as per the following screenshot:
Then you'll find the control in the Store menu:
Alternatively, if you don't want to bring up the menu bar, it's still possible to get into the authorise controls via nested menus accessible from the wee boxy icon. Here's a screenshot of where to find them: -
I was at Apple Store yesterday and they created a pages document for me. When I got home and tried to open it, I get a message that I need a newer version of Pages. I see the image before I push "open". The 'kind' is pages publication. The file does not appear in the 'open recent' list.
Just be careful with Pages 5, it is not strictly an upgrade.
Apple has actually removed over 90 features and some work can be very difficult in the newer version.
It was all done to make it more interchangeable with the inferior iOS version:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&mforum=iworktipsn trick
Peter -
My iPod classic, which is 6 years old is corrupted. A message that says ''Connect to iTunes to restore'' keeps on blinking on the screen, But when I connected it to iTunes it says an error has occured and my iPod has hung after i've disconnected it.
Hi,
Time to take your iPod in for service.
You can make a Genius Bar reservation in advance if you are in the U.S.
http://www.apple.com/retail/geniusbar/
Carolyn -
i have an error message that comes up when i try to get into itunes... 0x 80092013 can anyone help
Hi Katy19831,
Thanks for using Apple Support Communities. These articles may help with the error you're seeing:
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
Cheers,
- Ari
Maybe you are looking for
-
Windows 8 and ITunes video play
Has anyone else got this problem with windows 8 and ITunes (10.7)? Any time I try to play a video or movie in iTunes I get this message ITUNES HAS STOPPED WORKING A problem caused the program to stop working correctly. Windows will close the program
-
Hi, We have developed a smartform for Voucher document printing. In print preview displaying line items only 1 time. When taking print its coming every line items 2 times. Whats the problem for that. Kindly suggest .
-
APPLES EXTERNAL MODEM FOR IMAC G5 PPC
BOUGHT THE APPLE EXTERNAL MODEM BUT NEVER GET MORE THAN 3200 BPS.WHERE AS MY IMAC DVD WITH BUILT IN MODEM GETS 4800
-
Need clarification on Project professional CACHE
Hi I am opening Project plan from cache location in MS Project 2010 (not from retrieve list of all projects from project server) but the issue is can see updated project plan (as like open from project server) Steps which i performed below 1. Created
-
More syntax questions about nested symbols
I have a symbol timeline that does everything I need it to do except to access a function within the stage symbol. I would have thought that calling the function in the stage symbol from a nested symbol (which is loaded dynamically, if that makes any