Possible to design two reports  simultaneously?

Hello!
Is it possible to have one OBIEE analysis/dashboard open in one browser window and design a second report in another browser window? I tried it but when saving I got an cryptic XML error, though it may totally unrelated. After all, I am a OBIEE freshman.

Hi Larry,
The answer is yes, you can do it.
It is better to use Mozilla browser rather than internet explorer to access answers.

Similar Messages

  • Is it possible to add sub-reports at runtime?

    Post Author: saibot83
    CA Forum: General
    Hello,I have a vast amount of reports. The user can select a list of reports and group them.  I want the user to be ableto treat the report group as a single report (I.e. export to a single pdf file instead of 10 etc.) Is is possible to create an empty report that I can use to group all the reports that the user has selected into one?or Is it possible to design  a report at runtime? I am using CR with VS .NET 2005. And have not found a way.  Does the Developer version of CR allow me to do this? Any help will be greatly appreciated. Best Regards,Tobias  Any help will be appreciated.

    Post Author: [email protected]
    CA Forum: General
    At first thought, if each subreport is a parameter, you can put a subreport in each section and conditionally suppress the section when
    isnull(?Parameter)

  • Is it possible to play two audio files simultaneously.

    Hi,
    Is it possible to play two audio files simultaneously.
    I modified the 'SpeakHere' to play two audio files simultaneously, it worked perfectly on simulator but get hanged on iphone.
    To this I implemented NSTimer, which regularly checks for both player instance every second.As soon as any player gets stopped Timer task stops the second one forcefully and again starts both.
    thanks.

    Hi Jay
    Do you have the eLearning Suite? If so, you have Adobe Presenter available to you. If you don't, you should be able to download the Presenter installation file and evaluate it.
    Presenter is an add in for PowerPoint. The neat thing about it is that it provides for a Table of Contents type of functionality as you see is configured in Captivate. But the twist with that is you are able to do something you cannot do in Captivate. You are able to insert videos inside the TOC area!
    Just musing out loud... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • Combine two reports in query designer using key figure with sap exit

    Hi experts,
    i want to combine two reports in query designer using key figure with sap exit
    in the report 1 key figure calculation based on the open on key date(0P_DATE_OPEN)
    to calculate due and not due in two columns
    in report 2 key figure calculate in the time zones using given in variable Grid Width (0DPM_BV0) like due in 1 to 30 days, 31 to 60 days...the due amount based on the open on key date(0P_DATE_OPEN)
    to calculate in 1-30, 31-60, 61-90, 91-120, 121-150 and >150 days in 6 columns
    now i have requirement like this
    not due, 1-30, 31-60, >60, due,1-30, 31-60, >60 in 8 columns
    or
    not due, due, 1-30, 31-60, 61-90, 91-120, 121-150 and >150 in 8 col
    thank you

    Hi Dirk,
    you perhaps know my requirement,
    for the management to make used in one report,
    we have in reporting finacials Ehp3.
    Vendor Due Date Analysis - which show due, not due
    Vendor Overdue Analysis - show only due and analysis in time grid frame
    i want to combine in one report that show NOT DUE, DUE, DUE time frames in grid.
    krish...

  • Combine two reports in query designer

    Hi experts,
    i want to ombine two reports which are using key figure with sap exit in query designer
    in the report 1 key figure calculation based on the open on key date(0P_DATE_OPEN)
    to calculate due and not due in two columns
    in report 2 key figure calculate in the time zones using given in variable Grid Width (0DPM_BV0) like due in 1 to 30 days, 31 to 60 days...the due amount based on the open on key date(0P_DATE_OPEN)
    to calculate in 1-30, 31-60, 61-90, 91-120, 121-150 and >150 days in 6 columns
    now i have requirement like this
    not due, 1-30, 31-60, >60, due,1-30, 31-60, >60 in 8 columns
    or
    not due, due, 1-30, 31-60, 61-90, 91-120, 121-150 and >150 in 8 col
    thank you

    Hi,
    Have you tried APD?
    You can combine them using workbook or from a multiprovider query. APD is another option. Have a look at these APD docs:
    In APD, you can take input from two queries, then combine them and load to another object (DSO).
    [Analysis Process Designer |https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/413ba6c1-0d01-0010-1980-ec450e30f23c]
    [AGSAP NetWeaver 7.0 Application Process Designer|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b06c3f96-ed4f-2a10-1693-f2c76a39988f]
    Let me know where you r stuck...
    Regards,
    Ashish

  • Is it possible to run two different version of jre simultanously ?

    My client is using two diffrent application those supports two different versions of jre(1.2 & 1.4). If he uses jre1.2 only one application works ,and if he uses jre1.4 then the other works but the 1st shows error messege And vice versa.
    Is there any solution to shortout this issue?

    Is it possible to run two different version of jre simultanously ?Yes. In different processes, of course.

  • Is it possible to combine two pivot report into one ?..

    Is it possible to combine two pivot report into one ?..
    Then trying to display a chart or table result.

    Thanks for the reply.
    Let me explain it briefly. I am creating a Report 1 based on one fitler condition and second report is created based on second filter condition.
    I have similar column (time periods) in the both report. Then measure column has to combine and show as single report.
    This is my requirement.

  • Is it possible to run two GPS tracking apps simultaneously?

    I have a couple of apps that track your position via GPS, like MotionX GPS. They run in the background under iOS 4.2.1. Is it possible to run two of these at the same time? Will they both get GPS updates from the OS as quick as they would if only one were running?

    Before someone says "try it and see if it works," I plan to. I just haven't had a chance yet.

  • Link two reports using parameters

    Hi,
    We are using business object XI.
    I am trying to link two reports using parameters. I cannot use subreport option becuase inside the subreport I should link another report too. So,
    Report 1(High level summary)
    Report 2(Middle level summary)
    Report 3(Detail level)
    I tried to use hyperlink option and used following string.
    http://<server_name>/<Virtual Directory>/object.rpt?prompt0={?param1}&prompt1={?param2}
    Here is my question.
    1. Server name: Does it include port number??
    2. Virtual Directory: I am absolutely lost. I tried the "frsinput" directory the actual rpt file is storing. It is not working.
    Do you have general path??
    3. Parameters: I have 5 parameters to pass. 3 of them are Strings and the rest are DateTime.
    Basically, I need any tutorial about this kinds of things. The tutorial I have got only discribe link like "www.yahoo.com"
    BTW, is this even possible solution??

    Hi,
    I am trying to link two reports in the crystal report designer->deploy to the server->show in the DHTML viewer.
    When I create a URL from report A, it looks like "&" disapears. For example, I created a hyper link from report A using formula,
    http://server:port/........openDocument.jsp?sDocName=reportB&sType=rpt&paramName1="Trim(ToText({?param1},"#####"))"&paramName2="+Trim(ToText ({?param2},"#######"))
    But when I see the actual URL, all the "&" disappears so it looks like
    http://server:port/........openDocument.jsp?sDocName=reportBsType=rptparamName1="Trim(ToText({?param1},"#####"))"paramName2="+Trim(ToText ({?param2},"#######"))
    No wonder it is not working.
    I guess I need special protection for "&" sign. Do you know any?

  • Two report join not working

    I have two reports: Lead History(registered reciepents) and Campaign Reciepents History(email click-thru reciepents) with columns Full Name, Company/Account Name, and Job Title. I want to do a join that pull out the click-thru's that registered. Union and Union All gives me everything, Minus gives me just the click-thru's, and Intersect gives me nothing. What complicated join can I do to make this possible?

    Thank you, Barney-15E and Nerowolfe.
    First, you are right - I am using the 17" MacBook Pro (but not the ltest version).
    Second, I looked in the Library folders and found Sidetrack in the Startup items. I deleted it (although I had already removed it from the Startup items in the System Preferences.
    Third, I reset the PRAM.
    However the 2-finger scrolling is still not working. I did notice (and I don't know if this is something new) that the cursor is now immobile when trying to use two fingers although it is fine with one finger. It as though the trackpad recognizes that two fingers are different from one, but it doesn't know what to do with two-fingers.
    On a more general note, thank you all for your interest and quick responses. But...what should I try next? Apple suggests resetting the Power Management.

  • HT204053 Is it possible to have two (or more) different icloud mail accounts (not alias) under the same apple id? If not what is you best advice for all family members to have their own e-mail and still share the purchases under the same apple id. Thanks

    Is it possible to have two (or more) different icloud mail accounts (not alias) under the same apple id? If not what is you best advice for all family members to have their own e-mail and still share the purchases under the same apple id. Thanks

    mannyace wrote:
    Thanks for the response.
    So I basically won't run into any trouble? I
    There should be no issues. Its designed to work like that.  You don't change Apple IDs just because you get a new device.
    mannyace wrote:
    Thanks for the response.
    Is there any chance that the phones can fall out of sync?
    Unlikely. But nothing is impossible.   Though I don;t see how that would happen. As long as both are signed into the Same Apple ID / iCloud Account they will be N'Sync. (Bad Joke)
    mannyace wrote:
    Thanks for the response.
    If I get a message or buy an app or take a photo on the iPhone 5, how do I get those things onto the iPhone 6?
    If you buy an App, you have 2 ways to get it to the iPhone6: If Automatic Downloads is enabled in Settings->iTunes & App Store, it will automatically download to the iPhone 6 when you buy it on the 5 and vice versa if you buy it on the 6, it will download to the 5.
    Alternatively, you can simply go to the App Store App->Updates->Purchased and look for the App there and download it. Purchased Apps will not require payment again. i.e They'll be free to download to the iPhone 6 once purchased.
    SMS Messages will sync over using Continuity as long as they are on the same Wifi network. Otherwise, restoring the iPhone 5 backup to the iPhone 6 will transfer all messages received up until the backup was made onto the iPhone 6.
    Images, can be transferred either through Photo Stream
    My Photo Stream FAQ - Apple Support
    Or any Cloud service you want such as Dropbox, or One Drive.
    mannyace wrote:
    Also, something i forgot to ask initially: Should I update the iPhone 5 to iOS 8 first or does that not matter?
    If you want the Continuity features as explained above you need to update the iPhone 5 to iOS 8. Otherwise its not all that important.

  • Two report outputs in a single screen

    Hi,
    I am looking at giving outputs of two reports in a single screen.
    I mean one below the other.
    We are using web reports and I want to have two reporst made out of differect cubes appear one below the other.
    Kindly let me know if this is possible.
    Suggestions will definitely be rewarded by giving points.
    Regards,
    Naveen

    Hi Naveen,
           In WAD, you can use Generic Navigation Block web item for displaying the Characteristics/Free Characteristics available in the Query.
    In the specific properties tab(Web Item Properties->Specific->List of Characteristics) of this web item, you can specify the Characteristics/Free Characteristics which you want to be displayed in the web report.
    Since you want the table web item(which shows the report having the free characteristics) to be affected by the drill down in Navigational block, then specify the data provider of table web item in the <b>Affected Data Provider</b> of the Navigation Block web item.
    Naveen, it's not mandatory to check the affected data providers if the data providers for both Navigational Block web item and the Table web item are same.
    Hope this helps.
    Regards
    Hari
    Message was edited by: Hari Krishnan K

  • Crystal reports- Calculation between two reports

    Hi Experts
    I have designed a sales and purchase transaction report using crystal reports and i have designed another report for accounting transactions like Excise Duty payable and receivables, Vat payable and receivables, Expenses(like EB, Maintenance) and so on. Finally I added accounting report as sub-report into First Report.
    My question is, is it possible to made some calculations between sub-report and main report.
    Hope some solutions from you.
    By
    Kala

    Hello,
    right upto the linking is good?
    Right now you have to create a formula (which you might have already done for "Total expenses", you just need to alternate it slightly.
    Example:
    On 2nd report (subreport) You might have a formula like given below.
    Instead of Numbervar CAvg, which is the last shown value in the below formula, you have to make it like Shared Numbervar CAvg.
    Whileprintingrecords;
    Numbervar TJs;
    Numbervar TotalJobs=0;
    Shared Numbervar CAvg;
    Shared Numbervar CAvg=0;
    TotalJobs := DistinctCount({lab_credits.credit_no},{lab_credits.reason_code}); 
    CAvg:= TotalJobs /{@WorkingDays};
    TJs:=TJs + CAvg;
    CAvg
    Do your calculation above.
    Now in the main report you will create another formula which will look like below.
    Whileprintingrecords;
    Shared Numbervar CAvg;
    Numbervar TAvg:=fieldname;
    Numbervar TotalBoth:= Shared Numbervar CAvg+ Numbervar TAvg;
    TotalBoth;
    You will have a reset formula which will be placed ontop of the report header , group header if you are using grouping like this
    Whileprintingrecords;
    Shared Numbervar CAvg:=0;
    SHared Numbervar TAvg:=0;
    bearing in mind that we do not have to declare CAvg field here as it is being shared.
    Hope this helps
    Regards
    Jehanzeb

  • Problem trying to share a Search Field with two Reports

    Hello!I have two Reports(Report1 and Report2) in two different pages. In both of the pages i have the same select list(Item1 and Item2 ). I want to select something in the select list(Item1) of Report1 and my choice to be saved in the select list(Item2) of Report2 too.Can anyone please help me?
    Is it possible to have one select list for two Reports ?
    Thanx in advance for any answers...
    Edited by: user10642834 on May 8, 2009 10:15 AM

    Thank you very much! I tried what you said and it seems to be working fine now. I have a similar problem(a little bit more complicated) with my two forms on these reports. The reports actually contain the columns of one table separated in two groups(Report1=group1 and Report2=group2). So when i select Edit on a row of Report1 i go to Form1 and see the data to be edited of Form1 of row1 for example. I would like to go to Form2(i have a tab for this) and see the same row(row1) to be edited with the columns of Report2.I hope that i am clear enough. Thanx again for the previous answer and i hope that you can solve this problem too.

  • How to combine two reports in obiee 10g(not union)

    Hi Everyone
    I have got a requirement where client is asking to combine two report to one
    Report A has columns
    "Region", "category" ,"in house " ,"sales" which can be shown by applying filters for current running year
    Report B
    Region,Category, Week5,week6, week7,week8 in this showing sales in individual week by using pivot view and limiting to four weeks
    with a week filter
    Now client req is to combine both reports into single one
    region, category,inhouse,sales,week5,week6,week7,week8 here the issue is inhouse and sales data has show yearly data and week 5,week6,week7,week8 has to show weekly data .And weeks columns has to get updated automatically .
    I am having a confusion in this will it possible to combine both reports, if possible pls help out how to do it
    Regards
    Sandeep
    Edited by: Sandeep on Jul 31, 2011 9:20 AM
    Edited by: Sandeep on Aug 1, 2011 1:43 AM

    First of all, proof read your post. Generally, grammatical and punctuation errors can be deciphered, but where words are critical to presenting your issue clearly, you must type those sentences correctly. Otherwise, it can be confusing and turn off someone who may want to help.
    "...which can be shown without and filters and want data for current year." What does this mean?
    "...And weeks columns have to update its week no based on that week." What does this mean?
    In an attempt to answer you question, do this:
    1) Base your query filters on the "current running year." This will satisfy the requirements for displaying data from the first report.
    2) Now add 4 "sales" columns (i.e., same column, but 4 instances of it). In each of these columns, click on the fx button, click on Filters, go to your Time dimension and select the appropriate week, and then click "OK." Now, each of these columns will hold the measure value for the particular week while the "sales" column will have the "running total" for the whole time period.
    Once you get the above to work, you can work on automating this by substituting a function in place of the hard-coded week number values.

Maybe you are looking for