Possible to re-use G5 serial-ata drives in a new Mac Pro?

I am getting ready to retire a Power Mac G5 Quad and am wondering whether I can take its two serial-ata internal hard drives and install directly into two of the empty slots I have in a new Mac Pro? Any issues that I should be aware of?
Thanks in advance for your assistance.
Brymer

FWIW and just in case, guide to migrating.
http://discussions.apple.com/thread.jspa?threadID=435350
And the Quad G5 seemed to be the only G5 that could actually use GPT format (probably preparing for transition to the Mac Pro I'd guess). Was also able to use NCQ and some other SATA II (2.5) features and specs.

Similar Messages

Is it possible to upgrade from 500GB Serial ATA Drive @ 5400 rpm to ssd on the new 13" 2012 macbook pro?

is it possible to upgrade from 500GB Serial ATA Drive @ 5400 rpm to ssd on the new 13" 2012 macbook pro?

New non-retina 15" MBP, I just replaced the 500 gb HD with a Samsung 830 256 gb SSD from Amazon, $255 for the kit (includes a USB cable). Wow. What a difference. Yes, there was a learning curve for some of it, but was so worth it. Let me know if I can help. I'm using the 500 gb in 2 partitions - one for a clone of the SSD, and one for Time Machine.

Starting up problems from an old boot drive in a new mac pro

Just purchased a refurb mac pro last weekend through the apple store. I took my old drive my my first mac pro and was trying to usee it for the boot drive, That machine did not come with snow leopard. I did upgrade it to 10.6.6. When I start up from that drive in the new mac pro it was either starting up real slowly or starting up and would not give me a cursor or. On some occasion I would get a translucent blue huge on the screen. Or I could get a clear screen but nothing would happen if I clicked to open anything. I called support and we reinstalled the on the old drive. I seemed stable and was booting properly from the old drive. Then I upgraded to 10.6.6 again. We used the software the new machine came with for this process. I maybe used the new boot drive for maybe 50 seconds. Apple support wishes for me to go through the process of isolating elements. I've been running the new drive since yesterday. Everything is working well. Except after letting it run for a period of time yesterday got s grey screen after it went to sleep. We'll see what happens with that today. I do not know if it's coincidence or not but the old system went hicky after I started up Paralllels desktop.I'm using Parallelsto run Playon. I'm wondering if Parallels or the xp emulation machine I'm running with it is still trying to read the old macpro ? It did work however. I'm just curious that it's altering something in the Mac osx ? Another thing should I subtract other wirleeless choice devices on the old drive's system ? The old macpro had wireless but the module was installed aftermarket by a mac store.
Thanks

Hard to follow your steps and thoughts. Maybe re-read and cut it into actual steps.
Always clone a system so you have a bootable backup image.
Make sure your software and drivers are compatible.
2010s boot into 64-bit kernel mode by default.
Apple still sells 2009s also on Specials page.
Your old Mac Pro wouldn't come with 10.6 unless it came out in Sept 2009 or later.
Is Parallels current? Is it attached to Windows partition or VM only? does it care that it is running on new hardware? that usually is a non-starter.
New Mac is also a good time to do thorough spring house cleaning. Clean install all the applications and drivers.
Pull your old drive out. The only use for it would be to run Setup Assistant to import your home account prefs.
The "new" refurbished hard drive is still in same state it was in when you got it?
Sleep issue. you may have external devices or 3rd party drivers or bad cable somewhere.
Wireless?
At this point I doubt I can read between the lines.
+Break it into compartments and subjects instead of hash stew for us!+

I have an imac bought late 2013, can i use it as a display for the new mac pro? I also want to use windows 8 on it, would this work with parallels or bootcamp?

I have an imac bought late 2013, can i use it as a display for the new mac pro? I also want to use windows 8 on it, would this work with parallels or bootcamp?

Yes, it supports target display mode. Windows can be run with either Parallels or Boot Camp.

I have an imac bought late 2013, can i use it as a display for the new mac pro running windows 8 through bootcamp?

I have an imac bought late 2013, can i use it as a display for the new mac pro running windows 8 through bootcamp?

No. Target Display mode is only supported when connected to a Mac running 10.6 or later.
It cannot be used with a PC, bootcamp, gamaing console, cable box, DVR or PowerPC Mac.
http://support.apple.com/kb/ht3924

Can I use my G5 Dual 2.7Ghz drives in a new Mac Pro?

I currently have 2 drives in G5 and would like to move them over to a new Mac Pro Tower, they being a WD 740GD SATA high speed drive as well as my boot up 700G SATA drive. Are they compatible and has anyone had issues? Cheers.

Actually, the drives might need to be reformatted because your G5 uses PowerPC processors, which need to be formatted using the Apple Partition Map.
Your Mac Pro is an Intel machine, so the drives will need to be formatted using the GUID partition; disk utility can take care of this for you.

How to use hard drives with the new mac pro

A few quick questions about upgrading to new Mac pro desktop
I currently have 4 internal hard drives for a total of 8T
What will the solution be to add storage to the new desktop?
I assume it will be thunderbolt options?
Lets say I wanted at least 8TB of storage to add to the computer
and attached the storage via thunderbolt will it be as fast data throughput
as the harddrives in my current computer hooked up to the external bus?
I also have a pci card running my audio plugins for Universal Audio how will those pci
cards work on the new mac pro?

Also will the transfer rate with the pegas be as fast as if the drives were connected to the bus in the machines like the old mac pro?
To answer that, think of this as a Bottleneck problem. The overall performance is as slow as the slowest device.
At this writing typical rotating drives can produce a momentary burst at 125 MBytes/sec or 1,000 Mbits/sec. Only FireWire 800 is starting to be a limit for that -- EVERYTHING else is faster. Thunderbolt-1 is 10,000 Mbits/sec -- ten times faster.
The best SSD can produce a burst at maybe 800 MBytes/sec or 6,400 Mbits/sec. There is not a big speed difference in an SSD RAID, because the latency is already low. But the 10,000 Mbits/sec of ThunderBolt-1 is still plenty fast enough for that as well.
If ThunderBolt-2 devices really can run a single data stream at 20,000 Mbits/sec, that does not make ANYTHING faster -- it just moves the ceiling (potential bottleneck) a bit farther away.

Moving XP drive to a new Mac Pro

I have an install of XP via Boot Camp on an old Mac Pro. It exists on it's own hard drive installed in the machine.
I'd like to move it to a new Mac Pro.
Is it as simple as moving the drive to the new machine?
When I run boot camp on the new machine will it recognize the previous install? Or will I need to do a new install?
Thanks
Dj

It 'should' work, but XP will see it is on different hardware and require activation or something. And, you always need to boot from XP CD once when moving it to do some system repair from what I heard.
If you want to address 4-8GB RAM; use both cpus, have better multi-core support, I wouldn't even use XP.
So depends on if this is retail or system builder whether you can deactivate and move the license.

Is a SSD drive for a new Mac Pro "worth it"?

I will be purchasing a new Mac Pro quad-core in the next month or so. My computer usage, other than email and some word processing, consists primarily of editing RAW photo files using Nikon Capture NX2, Photoshop Elements, and iPhoto. I do almost nothing with video. Would a SSD boot drive offer me any significant advantage over a 1 TB hard drive? Would it appreciably speed up photo editing of the RAW files, or simply boot faster? If you do recommend one, what size would I need for a boot drive to contain the OS and all program software? I will be upgrading from my current G5, so I suspect anything will initially seem very fast. Thanks!

It depends on just how dependent on disk I/O your software is. Hard drives are still, by far, the slowest link in the performance chain for a computer. If your software is primarily CPU bound and goes to the hard drive very little, you won't notice the benefits of an SSD that much. I use Apple's Aperture, and Aperture is VERY sensitive to disk speed for the volume where your library file is. There are several key databases in the library package that are extremely sensitive to disk performance and particularly file fragmentation.
I have an OWC Mercury Extreme SSD that I use for my operating system and applications, and then I have a RAID 0 of three Western Digital Hard drives for my Aperture library. RAID 0 is striping with no parity. Since there is no parity and no protection from hardware failure, I back up with TimeMachine, manual copies and I also use Mozy.com for automatic offline backups.
The machine boots nearly instantly, and application launching is extremely fast. Most programs show a definite improvement and overall I am very pleased with the configuration.
However, Aperture's library databases are extremely prone to fragmentation. There is a noticeable and significant increase in performance every time I defrag my aperture volume with iDefrag, and if I have a really long editing session I can notice performance degrading over time.
Right now my workflow with Aperture is pretty sporadic, so defragmenting routinely isn't that big of an issue. However, I anticipate getting into Aperture more as I start photographing more projects. I think if that happens, I will probably get a second SSD and also finally convert my Aperture library from managed to referenced. Apple has added features in Aperture 3 so that referenced libraries aren't that big of a PITA, so I should be able to keep the Aperture databases on the SSD and reference my masters on my RAID drive. Best of all worlds.
Also do not buy the SSD from Apple. Right now the only viable SSD's are ones that do internal garbage collection like the OWC Mercury Extreme. See my other post here for the ups and downs of SSDs:
http://discussions.apple.com/thread.jspa?messageID=11248829&#11248829

What's the best way to configure my thunderbolt drive with the new mac pro?

I have an external pegasus drive connected to my mac pro. Obviously the computer is limited in space and I was wondering whether I should move my "user" folder which will include documents, pictures, videos, etc onto the pegasus. That way the 256gb hard drive on the mac pro is dedicated solely for the os and and apps. What do you guys think?

I concur. See the following:
How to use an SSD with your HDD
If you are going to use an SSD as a boot drive together with your existing HDD as the "data" drive, here's what you can do.
After installing the SSD you will need to partition and format the SSD using Disk Utility. Then, install OS X on the SSD. After OS X has been installed boot from the SSD. Use Startup Disk preferences to set the SSD as the startup volume.
Open Users & Groups preferences. Click on the lock icon and authenticate. CTRL- or RIGHT-click on your user account listing in the sidebar and select Advanced Options from the context menu.
You will see a field labeled "Home dir:" At the right end you will see a Change button. Click on it. In the file dialog locate the Home folder now located on the HDD (HDD/Users/account_name/.) Select the folder, click on Open button. Restart the computer as directed.
When the computer boots up it will now be using the Home folder located on the HDD.
Another more technical method involving the Terminal and aliases is discussed in depth here: Using OS X with an SSD plus HDD setup - Matt Gemmell. This is my preferred approach because I can select which of the Home's folders I want on the HDD and which I don't want. For example, I like to keep the Documents and Library folders on the SSD because I access their content frequently.
Be sure you retain the fully bootable system on your HDD in case you ever need it.

Can I use the 2nd Optical Drive Bay on my Mac Pro for an SSD?

Since I have no plans to add a second Optical Drive to my Mac Pro in the Second Optical Drive bay, I was wondering if I could put an SSD in that bay using a 2.5' to 3.5" drive carriage. Is this possible? Would it work? Would I be able to use it as my boot drive? Never tried this, so not sure if it would work.
Thanks in advance.

Your 2010 model has SATA wiring in that bay, so the SSD plugs right in.
Macs can boot from the drive specified in System preferences > Startup Disk.
You would need an adapter from 2.5 size of the drive to the 5.25 (CD drive) size expected, but since there are no moving parts, most folks just dump the drive in there without a bracket.
The biggest payback comes from establishing a Boot Drive with only System, Library, Applications, and the hidden Unix files including Paging/Swap. Putting the boot drive on an SSD is frosting -- it provides an incremental improvement over a spinning Boot drive.
A caution when establishing your drive -- some users have killed brand new SSD drives by cloning onto them. The manufacturers have not been helpful in telling us why this happens, but a clean Install may be a better way to proceed.

Hard Drive Carrier old & new Mac Pro

hi!
i'm asking me if the hd carriers from the "old" mac pro fits in the early 08 one's?
thx alot

Be aware the Transintl sleds do not come with anti-vibration grommets which are a standard component of the Apple sleds. - When I received my sleds from Transintl I thought the grommets were omitted by mistake and sent an email stating such. Here is Transintl's response:
"No we are not shipping Pro Sleds with any spacers. In my opinion
these rubber spacers are not needed just because of the fact that no
other computer manufacture uses such grommets including Apple
in there machines to mount hard disk drives including previous
models of Mc Pro."
Message was edited by: chainsaw

I am trying to connect my LaCie thunderbolt 2 5big drives to my new Mac Pro. They will not mount. If I unplug them and plug them into my MBP they mount immediately

I have 2 LaCie Thunderbolt 2 5Big drives. I have been using them successfully with my mbp. I just purchased a Mac Pro and plugged them in and they will not mount. I am stumped as how to get the Mac Pro to recognize them

This is the Mac Pro black cylinder, late 2013 model?
Have you tried one at a time? Have you tried different ThunderBolt ports?
What display are you using and what port is it plugged into? You may want to be sure your drives and your displays are not on the same bus.
This article show which ports are on which ThunderBolt Busses:
Mac Pro (Late 2013): Using multiple displays - Apple Support

With no DVD drive on my new Mac Pro what is the alternative

I'm not really sure if I will ever need a DVD drive but if I did?
What is the best solution on a Mac Pro Retina notebook?

What is the best solution on a Mac Pro Retina notebook?
1) Exchange it for a MacBook Pro with a built-in DVD drive.
2) Buy Apple's external SuperDrive.
I have seen pepole duct-tape an external SuperDrive to a Retina notebook on airlines.

Swapping drives with a new mac pro?

Can I take a 500GB drive out of my old Macpro :
Dual-Core Intel Xeon
Processor Speed: 3 GHz
Number Of Processors: 2
and swap it with the drive in a new Macpro and have it boot off of the drive and access all of the programs just like it did in the old one?
Thanks!

As it turned out, I took my main drive out of the old mac pro and put it in the new one, and when I booted it it crashed twice. The screen displayed the blue color before booting to the apple logo and a transparent layer of black slowly crawled down the screen with a message that I need to restart

Possible to re-use G5 serial-ata drives in a new Mac Pro?

Similar Messages

Maybe you are looking for