Post-migration Network Issues with opening Appleworks 6 files

I just switched over from an ancient eMac to the new 3.06 GHz Intel Core 2 Duo iMac for my primary computer at work. Ever since I made the switch however when I try to open older Appleworks 6 files I am prompted repeatedly (at least 4 times):
"Connection failed: The server "SPSP-EMAC" may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again."
It seems like Appleworks is attempting to contact the windows server for SPSP-EMAC (a different eMac on the same network) in order to use the Appleworks 6 program.
I turned windows sharing back on the SPSP-EMAC and now I have to enter a password for the workgroup (seemingly to connect to the SPSP-EMAC in order to avoid the annoying pop-ups).
I'm not sure why the iMac requires this connection to SPSP-EMAC in order to run properly especially when Appleworks functions properly when it is not connected (despite of course the annoying repeat popups).
Any and all help would be greatly appreciated!
Thanks

Hello stephen:
I have not used Appleworks for years, but there is a forum for that product that might be helpful to you:
http://discussions.apple.com/forum.jspa?forumID=1004
Barry

Similar Messages

Issue with Opening a PDF file

We have just completed an upgrade of one of our servers executing Reporting Services.   The upgrade was from 2005 to 2008.
After we have rendered a report and have it saved in PDF format, we start having issues.
If we try to open the PDF by double clicking on the file name in Windows Explorer, Adobe Reader starts, but sits unresponsive and consumes an excessive amount of CPU cycles.    It never completes the open and we have to kill the Adobe Reader process in Task Manager.
If we start Adobe Reader, and then use the Menu to do FIle -> Open, the PDF file opens immediately.
We have attempted both methods using several different versions of Adobe Reader.    The issue occurs on all versions prior to 9.3.
Since we are a service organization, we are unable to force our clients to upgrade to a more current version of Adobe Reader without providing assurances that this will correct this issue.
Has anyone else seen this type of issue with opening PDF files rendered by Reporting Services?   And if so, what is the cause and how did you correct it?
Thanks
Steve

Hi there,
Please find attached a word document which contains the error that comes up when I try to open the PDF file. This PDF was e-mailed to me from one of the Safety companies that I receive e-mails from on a regular basis. I believe I am running Windows XP and the version of Adobe is Adobe Reader X. I hope this is enough info for you.
Janice Nadeau
[signatue deleted by host]

Issues with opening CR2 raw files in CS4

I have a Cannon EOS 60D Camera and I also have photoshop CS4.
When I try to open my raw photos into CS4, it does not recognise the file and says words to the effect of "this file is not recognised".
I tried to install the 5.3 plug in but this did not work.
Help !

athegn wrote:
Is it not possible to make a sticky to this:-
http://kb2.adobe.com/cps/407/kb407110.html
as it would save many such questions?
http://forums.adobe.com/thread/688958
Seems silly not to.

Please help. Issues with opening a .prm file.

I am trying to open a Win-CNC.prm file and all that happens is Adobe Premier Elements program pops up and that is it. What am I doing wrong?

Because it's not a frequently asked question, we do not have the Facebook section in the FAQ document. Sorry about that.
There is no direct way to get a PDF document shown in the Facebook window into Adobe Reader for iOS. You need to go from (1) Facebook to (2) Safari (web browser), then to (3) Adobe Reader on iPhone (and iPad as well).
In the Facebook page showing a PDF document, tap the Share icon in the bottom toolbar.
Select "Open in Safari" from the menu that appears.
In Safari, tap anywhere in the document to show the toolbar (below the top toolbar).
Tap "Open in..." (label) in the toolbar.
Tap "Open in Adobe Reader".
Please let us know if it doesn't work for you.

Issue with opening .PDF files after recalling from Symantec Enterprise Vault

Good Morning,
I am having issues with opening PDF files that have been recalled from Symantec Enterprise Vault and some of the files are anywhere from 3-4 years old. Some files open, while others return the error: Adobe Reader could not open filename.pdf because it is not a supported file type or might have been damaged. It is inconsistent as to which files it occurs with. I am not ready to believe that I have that many corrupt files out there. I am opening them on a Windows 7 Enterprise SP1 x64 desktop. Adobe 10.1.7. I have already configured the registry setting for bValidateBytesBeforeHeader that I found in another article to no avail.
The files are on a network share, but I also tried copying them to my local desktop and still received the error.
I have seen other posts regarding this error, but do not see a definitive solution and am hoping that in recent days someone has come up with a solution.
Thank You
Brian Dougherty

Not supported file type can (but not always) mean the PDF was created with an old enough version of Acrobat, that it isn't comaptible with reader X or XI.
Might have been damaged is pretty cut and dried in its meaning and interpretation.
There's a known issue with Mac OS and Safari Browser "breaking" PDFs as they download, but it's not so common for Windows. Since these are files you already had, it would be even less applicable.
You can try downloading an older version of Reader to check if it's a compatibility issue, but you'd have to uninstall the latest to do it and it'd be a lot of bother if they still don't open. It would also mean they are "broken" and cannot be repaired, that I know of.

Mac Pro 6,1 STILL having issues with Open CL (4K scaling and SpeedGrade direct link grades)

I've seen the staff responses to the issues of the new Mac Pro GPU saying that 10.9.4 fixes everything. For me, it has fixed my export issues, so I'm glad. I'm no longer getting lines and artifacts on my renders.
That's great.
However, I'm still having several issues, and they seem to be linked to Adobe and Open CL.
Here's a video that shows what's going on:
mac pro issues july 7 - YouTube
Issue #1
Like most of you probably, I'm doing 1080p exports of most things I'm working on. The first project shows a 1080p timeline with a mix of 4k, 5k, and 720p footage. Because zooming in so much on a 720p file in a 4k timeline looks so crappy, I'm doing 1080p timelines and scaling everything to the size it needs to be. I started in a 4k timeline then switched to 1080p because the 720p footage looked so terrible. However, in the 4k timeline, I didn't have any of the issues I'm showing in this first part of the video.
When I switched to the 1080p timeline, I discovered a weird quirk: When I resize the 4k (or 5k) footage to the size it needs to be (which varies based on the frame I want), it goes back to the 100% view when I'm scrubbing through it. When I pause, the size of the video goes back to the way I set it. I show this in the video. Then I show what was my working solution for the time being: "scale to frame size", which brings all the videos to the size of the sequence frame size and works fine. Later, I turn off OpenCL in premiere and when I scrub through the video, it doesn't zoom back in or only stay at the size I set when stopped. For some reason all of these issues only happen at 50% scale or smaller. It doesn't happen at, say, 60%.
I've tested this with raw R3D files and other 4K (or 5K) clips (even clips exported from After Effects) and the same thing happens. It doesn't seem to happen with 2.5k footage or 1080p footage.
Issue #2
This is the second project you'll see in the video.
After grading in speedgrade (through direct link) I open my project back up in premiere and start playing it back. The video plays back with delays and frame drops. Now normally, this would be expected. But this is 1080p pro res footage, and this is just an effect added, and the yellow bar appears indicating that open CL should be accelerating the playback and it should do so smoothly.
Maybe I was just wrong in assuming that a simple grade from speedgrade would be able to playback smoothly. I turn off the grade, and it plays normally.
But then, when I turn off open cl and leave the grade on, the video plays back without ANY issues.
So to me, it seems I'm still having issues with Open CL and adobe. I've found fixes that make it work temporarily, I don't need that kind of answer. However, I would like this to work. Is there something I'm doing wrong? Something I need to do to get this to work?
Here are my specs:
Mac Pro 6,1 (Late 2013)
3 GHz 8-Core Intel Xeon E5
64 GB 1867 MHz DDR3 ECC
AMD FirePro D700 6144 MB (x2)
OSX 10.9.4
Firmware: 2.20f18
What you're seeing is latest version of Premiere (CC 2014, v8.0.0 [169] Build)
Everything here is ProRes 422, running from a Promise Pegasus2 R4 RAID (drives: 4x Seagate Desktop HDD 4 TB SATA 6Gb/s NCQ 64MB Cache 3.5-Inch Internal Bare Drive ST4000DM000) (that's thunderbolt 2).
I've done everything: I've restarted my computer hundreds of times, I've reset NVRAM and PRAM and done power cycles.
This isn't just some issue that started with 10.9.3 of OSX, the 4k issues happened when I first switched to a 1080p sequence back in February (2014) or so, which means it was an issue even with 10.9.2 and the previous firmware release.
I've reported this issue to adobe.

That crash appears to be casued by the Facebook plug-in.
Create a new account (systempreferences -> accounts or Users & Groups on 10.7 and 10.8), make a new Library in that account, import some shots and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.

Issue with Open Enrolment Link in ESS - Benefits

Hi Experts,
We are facing two issues with open Enrolment Link in ESS for benefits, Need your help in resolving this. Please find the details below :
1. Benefits cost is not appearing in open enrolment Screen
Details : Monthly Contribution cost is not appearing against the Benefits Plan for which employees are already enrolled in Open Enrolment Screen, Because of this employees are not able see previous contribution before deciding on contribution amount for next Financial Year.
2. URL for Benefits plan Gets disappeared in Open enrolment Screen
Details : When Contribution is removed for any Benefits Plan the corresponding URL link disappears, But this comes up when the page is refreshed.
Could you please let us know if this is related to missing configuration or Java webdynpro code.
Our Live system is ECC6.0 SP level A4 , Please let me know if you need more details.Looking forward for your response.
Regards,
Shilpa

In regards to your first question, it could be a date issue for the infotype record. If the records for open enrollment are set to be effective for a future date, and the current record is delimited, then you won't see it in the open enrollment screen. This is true for benefits like a flex account because they have to be re-elected every plan year.
Let's say that any elections made in the current open enrollment period you are in take effect June 1, 2014. If the current record has an end date before June 1, then in the enrollment screen the employee will not see the current record because SAP is looking at June 1.
Take a look at the employee's record and at the benefit you want them to see and see what the end date is for the most recent record.

Popup with open and save file option

Hi,
I have created a button on my page name as "Export File" and created a process and called on "EXPORT FILE" button. I am using utl file in this procedure and i want to download this file and file will be .ics file using for calendar.
My page process code is
begin
pro_create_ical(:P6_START_DATE,:P6_END_DATE);
end;when i click on export file button it should raise a popup with open and save file option.
How i can do this?
Thanks & Regards
Vedant
Edited by: Vedant on Jan 25, 2013 1:59 AM
Edited by: Vedant on Jan 25, 2013 2:00 AM
Edited by: Vedant on Jan 25, 2013 3:49 AM

Shiv,
Have you installed any new Software/Spyware/Virus Scanner etc.Check it out.It might have caused the issue for last 5 days.
This issue is fixed in Latest Support Package Versions.
Which Version of Support Package you are using?
If EP6 <SP19 you will face this issue.
Just upgrade it to EP6, Support Pack-19,this will be resolved.
Upgrade of Support Pack wont take much time.you can get the document under http://service.sap.com/instguides
Hope it helps
Regards,
Karthick Eswaran
*Reward Points for helpful answers.

Will any Lion compatible application open AppleWorks paint files?

Is there any available application open AppleWorks paint files?
Better yet, any Lion compatible application that will do so.

I've been saving my completed AppleWorks Draw documents for a long time by copying them into Preview and saving from there, but, of course, you lose the ability to edit them then.
A bit off-topic, but I've found that you can't copy/paste an AppleWorks Paint document directly into Preview in Snow Leopard (as you could in previous versions of the OS). You need to paste it into an AppleWorks Draw document first, and then you can copy it from there, go to Preview, and use Command +n to make a new Preview document from the clipboard which then can be saved in the image format you prefer.
Until something that truly replaces AppleWorks comes along, I'm stuck in Snow Leopard, I'm afraid.
I'm just not willing to "make do" with several different applications that don't do as much as AppleWorks does as easily as AppleWorks does it.
Progress … isn't always.

Very Strange Network Issue With Two Guests on 2012 R2 Hyper-V Failover Cluster

Hi all. We're having a odd issue with two guests on our 2012 R2 failover cluster.
In a nutshell, if we shutdown a particular server (I'll call it Server A) another totally different server (Server B) on the same node loses it's network connectivity to the domain. If we start server A back up, network connectivity returns on server B.
At first I thought server A might be running a service that was somehow linked to server B, so I decided to disable server A's NIC. Interestingly, that had no affect on server B's connectivity.
The next step I tried was pausing server A and again, no adverse affect on server B's connectivity.
Next step was to live migrate server A to another node. This action did
cause server B to lose its network connection.
One other clue is that if I ping server B from either of the Hyper-V hosts in the cluster, I never lose network connection to server B.
So I would suspect this is some network issue on the cluster, but I'm kind of at a loss where to go from here.
Has anyone seen this behavior before or does anyone have any troubleshooting suggestions I can try?
Thanks!
George Moore

Hi Sir,
I'v never seen this before .
>>Next step was to live migrate server A to another node. This action did
cause server B to lose its network connection.
They are connecting to same virtual switch ?
First please run cluster validation to check if there is any error .
If it is ok , please try the following items for troubleshooting :
1. shutdown serverA serverB
2. then add another virtual NIC for serverB
3. start server B check if the issue happens to both "old" and "new" virtual NIC .
In addition , you can live migrate both A and B to another node , then try to live migrate A to the original node .
If the issue persists , I would suggest you to remove that virtual switch on both nodes then re-create them .
Best Regards,
Elton Ji
If it is not the answer please unmark it to continue
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Issue with "Open with Explorer" feature

Hello
Since the middle of last week, our users are experiencing some strange issues with the feature "Open with Explorer".
This feature is normally working perfectly, but from time to time, the users are receiving the error message when clicking on the button: "We´re having a problem opening this location in File Explorer. Add this web site to your Trusted Sites list and
try again.".
In all those computers, the SharePoint site is already in Trusted Sites list or in Local Intranet list. Moreover, just closing Internet Explorer and reopening it fix the issue.
Do you know what could be the reason of such a strange behavior?
Thanks in advance
Best regards
Yann

Make sure you are not running into the following scenario.
SPS13
"Open with Explorer" random error "We're having a problem opening this location in File Explorer. Add this web site to your Trusted Sites list and try again"
I quote directly from the above blog post but make sure you read the entire blog post.
The cause and the resolution methods are the following:
Cause: There is a missing Root site collection...
Resolution:
Check and ensure, that the “Managed Paths”
are not changed
in the web Application’s page, there is a (root) explicit for
this web application and there is a working Root site collection.
Amit

Network issues with Apple products?

I've got a weird issue with my Apple products connecting to certain networks. Two different instances:
1) My parents house, my iPhone, iPad, and MacBook Pro all have issues in contacting certain sites and apps. Things from google or apple servers wont work. Some things do, if I VPN to an outside network, everything works perfectly fine. I haven't been able to figure out what the root of the issue is. I've switched routers and contacted the network provider but they said it wasn't there fault. This has been going on for a bit. All non-Apple products seem to be fine.
2) My office, I know even less details about the network here, but I'm having a similar issue where my Apple devices get connectivity for a bit then stop and then come back later. If I VPN again, everything works perfectly fine. All non-Apple products work fine.
Anyone have any idea as to what this could be from?

I am having the same problem since upgrading to Snow Leopard. Really need an update from Apple or a solution. Been reading a lot of posts on several discussion boards but nobody has come up with a solution yet. Apple really needs to send us a fix for this. I understand it is also hapenning in Lion.

Networking issue with D110a

Just swapped out routers (Belkin to Airport Extreme). Lost connectivity to printer, and have been able to reconnect with USB and going through USB port on Airport Extreme. Problem is I can't get the printer networked as Bonjour Multifunction...get the following: "An error occurred while trying to add the selected device. Unable to communicate with the printer at this time". I have updated the network password on the printer and it has an IP address with good signal. Printed configuration page says everything is OK. I have unplugged, restarted, reinstalled EVERYTHING, to no avail. BTW, when I try to check for updates on the printer itself, I get the a Server Connection Error:
Any advice would be appreciated.

Hello @wfriedmanct,
Welcome to the HP forums.
I understand that you have been having some networking issues since you switched to the Airport Extreme.
I would like to help.
The router may need to have some adjustments made.
~ Multi-casting needs to be on or enabled (Allows Bonjour Connectivity)
~ Wireless Ports, these can also be blocked in security software:
Incoming (UDP) ports : 137, 138, 161, 427
Outgoing (TCP) ports : 137, 139, 427, 9100, 9220, 9500
~ Our printers only support 2.4 GHz not 5GHz
~ Recommended that the network name and password DO NOT contain and spaces/punctuation or special characters
~ Dual broadcasting enabled (for wireless b/g and n networks)
If you are getting a server connection error then the printer either does not have internet access or is getting lost.
I would try a manual DNS.
The following reply by happytohelp01, has instructions for setting the manual DNS.
It is for a 7510, but the steps will be very similar. If you get stuck, please let me know.
You also may find the following document useful in your situation.
Setting Up Your HP Printer on a Network with Apple AirPort
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Strange Networking Issue with OES

Since moving our entire infrastructure from Netware to OES, I've been trying to figure out a very strange issue. We are a K-12 school system with a data center at the central offices and a single server at each school. The data center has the servers that run all the centralized stuff, including the Master replicas for [root], the DA's for SLP, etc. We noticed that sometimes a school's server will drop out of the SLP tables. When that happens, we also cannot SSH to the school's server from the central servers. We can SSH to it from any other machine on the same subnet as the central servers. The central servers can ping it, but no UDP/TCP traffic can pass between them (no web traffic, etc). We finally realized it only happens when the ISP that serves that school has a brief blip or outage of some sort. The only way we have found to get the servers talking again is to reboot the central servers.
We have tried:
Restarting almost all services on central servers
Stopping and restarting networking
Switching to runlevel 1 and then back
Stopping firewall and/or shutting it off completely
Checking hosts.deny files
Disabling virus scanner (McAfee Enterprise)
Changing vmware network drivers from E1000 (known issue with vSphere 5.1) to VMXNET3
All servers run on HP Proliant servers (blades at central office, towers at schools) running vSphere 5.1. Links between the central office and schools are all 100Mbps fiber via two different ISP (depending on the school's location). A restart of the central office server fixes it every time. I am out of ideas now and at a loss as to why this happens when a WAN link goes down. We thought it was just isolated to one ISP, but it was just that that particular ISP is not quite as reliable as the other. We had an extended power outage at a school served by another ISP over the weekend and saw the same issue with that server after power was restored.
Any ideas or suggestions at where else we should be looking? We also run ZCM 11 at each school and the central office. When this happens, those servers never lose connectivity with each other and with the OES servers on each end. The ZCM servers run on the same vSphere host as the OES servers.

On 04/08/2014 12:26 PM, jmlester wrote:
>
> Since moving our entire infrastructure from Netware to OES, I've been
> trying to figure out a very strange issue. We are a K-12 school system
> with a data center at the central offices and a single server at each
> school. The data center has the servers that run all the centralized
> stuff, including the Master replicas for [root], the DA's for SLP, etc.
> We noticed that sometimes a school's server will drop out of the SLP
> tables. When that happens, we also cannot SSH to the school's server
To be clear, while i think this correlation is possible, I do not see any
possibility of causality in here unless your SSH client is somehow using
SLP to resolve the SSH server, which seems very unlikely. I'm not sure if
you're trying to state that SLP is the cause of the SSH stuff, but I do
not think you are.
> from the central servers. We can SSH to it from any other machine on
> the same subnet as the central servers. The central servers can ping
> it, but no UDP/TCP traffic can pass between them (no web traffic, etc).
Hmmm........... so routing works, and the server is even responding to
requests made to it (presumably, or something else is), but SSH is not
responding, or something is preventing it from responding.
> We finally realized it only happens when the ISP that serves that school
> has a brief blip or outage of some sort. The only way we have found to
> get the servers talking again is to reboot the central servers.
>
> We have tried:
>
> - Restarting almost all services on central servers
> - Stopping and restarting networking
> - Switching to runlevel 1 and then back
> - Stopping firewall and/or shutting it off completely
> - Checking hosts.deny files
> - Disabling virus scanner (McAfee Enterprise)
> - Changing vmware network drivers from E1000 (known issue with vSphere
> 5.1) to VMXNET3
>
>
> All servers run on HP Proliant servers (blades at central office, towers
> at schools) running vSphere 5.1. Links between the central office and
> schools are all 100Mbps fiber via two different ISP (depending on the
> school's location). A restart of the central office server fixes it
> every time. I am out of ideas now and at a loss as to why this happens
> when a WAN link goes down. We thought it was just isolated to one ISP,
> but it was just that that particular ISP is not quite as reliable as the
> other. We had an extended power outage at a school served by another
> ISP over the weekend and saw the same issue with that server after power
> was restored.
>
> Any ideas or suggestions at where else we should be looking? We also
> run ZCM 11 at each school and the central office. When this happens,
> those servers never lose connectivity with each other and with the OES
> servers on each end. The ZCM servers run on the same vSphere host as
> the OES servers.
I'd get a LAN trace from both sides at the same time. At the very least,
run tcpdump as shown below on both the central office machine as well as
the remote machine to see how the packets differ when trying different
things. If you do a test and do not see output on both sides, do it again
writing it to a file and post somewhere for us to review. Note: since
it's an SSH problem I would either NOT SSH into the system, or I'd be sure
to limit the tcpdump capture/output to something specific to the
connection being tested. Tracing something over which you are sending the
tracing data is never fun since every packet picked up causes another
packet to be generated, to be picked up, to be generated.... ad infinitum.
To see tcpdump output with limited details on the screen:
Code:
sudo /usr/sbin/tcpdump -n -s 0 -i any -vv
To write tcpdump output to a file:
Code:
sudo /usr/sbin/tcpdump -n -s 0 -i any -w /tmp/problem-20140408.cap
While filtering when capturing is typically not desired, you can do it by
adding something like 'host 10.1.2.3' to the list of tcpdump parameters at
the end of either of those two commands. The reason filtering during
capturing is not desired is that you may miss something.... the SLP
traffic, DNS, ARP, ICMP error showing the exact problem, etc.
Good luck.
If you find this post helpful and are logged into the web interface,
show your appreciation and click on the star below...

Issue with opening and closing 13 inch MBP

I recently received a 13 inch 8gb memory Macbook pro for educational purposes. Although I believe it is overall a great product, I have noticed an issue pertaining to opening and closing the device. Occasionally when I attempt to open the device, I notice that the black mechanism which attaches the display and keyboard together fails, or locks up in an unusual manner which prevents me from opening the device fully. This causes me to have to close the device, and open it once more. Although it doesn't appear to be a huge issue, I was wondering if this should be something of concern, or something that is common and is nothing to be worried about.

Although this isn't something that I've personally seen before, I probably wouldn't be too concerned if it doesn't look like anything is actually broken - assuming that it didn't cause issues with using the device, that is.
What might be a good idea, though, is if you have a few minutes and have an ARS nearby, is to make a Genius Bar appointment and let Apple take a quick look at it. It looks like some piece of mind is all you want, and given the scenario, having someone physically able to see/feel the issue is probably your best bet. The appointments are 15 minutes, and free of charge. You can make an appointment here.
Regards,
Gnomish8

Post-migration Network Issues with opening Appleworks 6 files

Similar Messages

Maybe you are looking for