Posted depreciation value is missing in Tax dep area

Hi
I have an asset where depreciation values (posted ) is missing from Tax depreciation area.Its ( posted values dep) there in Book depreciation .It's also there in planned values of tax depreciation areas.Do I have to run ASKB to put it (posted ) in tax depreciation area ?
Thanks
SAPUSer

Hi Murali
Thanks for your analysis. My answer to your questions are in italic.Kindly suggest what I am missing here ?
Thanks
Sapuser
lease check transaction OAYR for Tax Depreciation area and analyze how the system has been configured for posting rule. For example if the tax depreciation area is configured annual, the depreciation will get posted once a year and so.
I have checked OAYR for tax depreciation area and it has posting rules Monthly.
Have you checked the other assets, is the problem with only one particular assets or all the assets?
Only this asset.
If the issue is only with a particular asset, does it give depreciation values in planned depreciation?
Yes , In planned Tab it has values.
Can you check the depreciation key settings for tax depreciation area in asset master?
It is MSTL for Tax, and LINR for 01.
Hope above will certainly help you to proceed with investigattion, if you send your reply may be some one pick up further to analyze the issue.

Similar Messages

Difference between both Book Dep area 01 and tax dep area 15 ?

Can i know the dep. key & precentage will be same for both Book Dep area 01 and tax dep area 15 ?
If both are same than What is the need to create 15 dep area?
Normally For income tax purpouse dep. area 5 are using is 01 is a same % than no need to creation 15 is it right or wrong?
normally what company will do for book of accounts and the tax purpouse the 01 dep. area and dep15 area?
Please adivse me with one example.
thanks in advance
srinu. cac

Hi,
Different deprecistion areas are used for making it possible for the company to manage different views on their accounting reports made on the assets. All the definitions of depreciation areas (number, rules, perecentage) should be done due to the business requirements - there is no rule for this.
Regards,
Eli

Posting Different APC without changing the Book dep area APC

Hi All,
I am trying to post in ABSO different APC amount for different depreciation areas. I am able to post either increase or decrese of amount in APC for all the areas.
The screen in ABSO requires an amount to be posted, which can be changed for different depreciation areas.
My requirement is not to change the book dep area posting, i.e. "0" is to be posted for Book deprecaition area, and either positive or negative values for remaining areas depending upon the transaction type.
Can anyone help with this.
Thanks in advance
Krishna

Hi,
    In SPRO
    AA>Transactions> Aquisitions> Define Transaction types......
    Copy the TType that you would usually use to a new one.
    Then use "Limit Transaction Types to Dep.Areas" to restrict it to the Areas
    that you want to post to.
    Use this Ttype in ABSO then area 01 will not be posted to.
Kind regards

Asset values updation in Eco. Dep area 50

Dear All,
I have created one asset for Good will as on 01.02.2010 (go live date 01.02.2010) by using AS91, and i updated APC cost and Acum Depreciation for Dep area 50 - Eco. Depreciation only.
Right now my client want to add some new values (because of wrong value updated at the time of take over values)
How can i do the additions for those assets. i have total 4 Dep. areas but this asset have only one dep. area 50 - Eco. Dep. , more over they run the Dep. for last year (FY - 1st Jan. to 31 Dec.) Please suggest me.
Regards
Radha

Dear Murali,
I have done all those things, and we updated some values for Good Will with Negative sign, but right now we have to add some Negative value in the same asset.
EX: Asset no. 10001
take over values 100000
actual value 250000
Right now i have to add 150000 in that asset
Regards
Radha

Group Asset indicator for tax dep. in asset master

Problem in group asset for tax dep
While creating asset master data, indicator for Group Asset is in non - changeable mode for tax depreciation under area 15. When we assign
group asset under Additional Specifications in the box Group Asset,
system is giving message - Group asset does not manage area 15. Message
no. AA809
We need this for calculating Group Depreciation.
All configure settings have been carried out. Detail list is as follows
1.created account determination, screen laylot rules, number range
intervals & asset class for Group Asset.
2.Specify Depreciation Area for Group Assets.
3.Specify Asset Classes for Group Asset (OAAX)
How to go ahead on this?
Pl advice.

Hi,
Remove the Identical tick mark in Tcode OABD for tax dep area
i think ur problem will be solved
Regrds
Govind yadav

Reset Posted Depreciation

Dear Forum Experts,
Unfortunately i was selected Reset Posted Depreciation tab. Path -(spro-Financial Accounting- Asset Accounting- asset accounting(lean Implementation) - Preparing for production start up- Reset posted depreciation ) Now problem is all periods posted depreciation deleted for all assets in company code. Please help me how to get posted depreciation values again for all assets.
Many thanks for your valuable advise in advance.
Regards,
Nagesh

Hi,
As Alex mentioned, you need to execute depreciation for all ther periods again. But one caution, the depreciation would have been reset only in AA but not in GL. When you execute all over again, GL postings will further posted with these values. So, you may need to post reversal entries in GL to sync up with AA.
Best Regards,
Madhu

Dep area neg. value

we have one asset, group depreciation area is in USD, but our comp code currency is JPY, due to exchange rate fluctuation, the group depr. area now have negative value: -230 USD, but book dep. area is positive value, now we can't do any transaction against this asset because one of dep. area (grp dep. area) is negative, how to resolve this? thanks

Hi,
It is possible to maintain allvalues allowed in the tcodes : OADB and OABN. Here maintain the Allvalues allowed or negative values allowed in the Asset Accounting.
May i hope your problem was solved.
Regards,
Kanike

Deactivation of sp res dep area

When i go to activate only Book & tax dep area only , at that time the Special reserve Dep area get automaticly active by chekout the deactive chekbox autpmatically.
Why ti is like so ?

Hi Viswa
It is no authorization issue.. It is expected and standard behaviour
You cant deactivate any dep area in the asset master once you create and SAVE.. In the current circumstances,
a. Put a deletion flag in the Asset Master... If any values are posted in it, then scrap the asset w/o revenue
b. Create a new asset and deactivate the Dep Area in it
BR,Ajay M

Withholding tax lines are cleared alongwith other line items (Msg 8I701)

Hi,
While processing j1inchln at the time of posting system gives error of Withholding tax lines are cleared alongwith other line items (Msg 8I701)
regards,
mahesh

Hi,
As per my analysis we found some documents, here We have made advance payment to vendors with TDS and again rised invoce to vendors with TDS and these documents have been nockedoff in F-54.
We have many documents of such nature and as per me it is because of these documents the system is throwing error. Pls. advice as to how to proceed on this.
Thanks,
Saisri

Asset value for Calculation of Tax Depreciation

We have been told that many of the assets created as of 1/1/2008 have a different (lower) tax value than their beginning book value. Book value is correct for standard book depreciation.     Is there a process to update the tax value of assets created in SAP similar to the transaction AS92 used to update values for Converted Assets?
It was suggested that we use the method of Unplanned Depreciation tcode ABAA with TTY 642/652 to change the tax value of the asset. When I tested this I found the various tax depreciation methods were calculated based on the beginning book value for year 1 and not using taking the special depreciation into consideration until subsequent years.   This is using Depreciation Area 10, MACRS, Dep. Key M200.
Is there a better method of altering asset book value for tax purposes or a better way to alter the tax depreciation calculation so it takes Unplanned Depreciation into consideration during year 1?
Current simplified tax depreciation example:
Beg. BV $1,000
unplanned dep posted $100
tax depreciation for year 1 $100
tax depreciation for years 2-10 $88.88
The preferred depreciation is $90 years 1 - 10.
Thanks for your assistance,
Jeff

I think I had the cart before the horse on this problem. The correct way to look at this is what is the best way to get the correct "Net Book Value" and not the correct tax depreciation posting as it never actually gets booked.
By knowing the incorrect Beginning BV, the rate depreciation is applied in year 1 and finally the desired Net BV value at the end of year 1 for tax purposes I am able to calculate the correct Unplanned Depreciation for tax to make everything work out correctly.
correct beginning tax BV $1,200
Beginning Asset Book Value $1,800
depreciation $360 (20% of BV)
Unplanned depreciation $?
Net BV for tax at end of Yr1 $960 ; or 1,200 - (1,200*.2)
With the know values above that makes my unplanned depreciation for Yr 1 to be $480. Year 1 and all following years depreciate correctly after the Unplanned Depreciation is posted.
I am marking this as resolved unless someone sees an error in my thinking.
Thanks,
Jeff

Depreciation value not shown under the tab 'posted value' in AW01N

Dear experts
I have in chart of depreciation US GAAP book(posted to G/L), local GAAP book(not posted), book to post difference of two GAAP(posted to G/L), and local tax book.
In AW01N, the ordinary depreciation value is shown correctly for all books in the first tab 'planned values',
But on the second tab 'posted values', depreciation value only shown for the US GAAP book.
I'm thinking it maybe relavant with posting to G/L or not, that means only book with posting to G/L is shown with deprecation value on the second tab.
But something strange is in another chart of deprecation, deprecation value is shown for US book, local book.
Could someone comment how to control deprecation value shown or not on the second tab by local book?
Best Regards,
Nicole

Hi,
If you would have mentioned it as a "area post in real time" it will show you in the aw01n. If not, it will not show. Because, the tab specifies the posted values which means how much depreciation posted to GL.
As you have put "area doesnot post" for the local book, it will not show the balance.
Thanks,
sravankumar

Tax statement item missing for tax code A0 - error while posting in MIRO

Hi,
At the time of MIRO, I am inserting P.O. and simulating the doc. However, at the time of posting the system is throwing the below mentioned error :
Tax statement item missing for tax code A0 (0% Input Tax)
Message no. FF805
Diagnosis
No tax item exists for tax code A0 in a G/L account item. A possible cause is an incorrect transfer of parameters by the application to the Accounting interface.
Procedure
Enter an OSS message.
Request you to help me resolving this error
Thanks in advance
Sagar
Edited by: Sagar Padhye on Nov 5, 2009 11:30 AM

Hey K.R.
a) Are you able to post transaction through Accounts payable using the same tax code ? - YES
b) in Miro are you able to use any other tax code and post the document ?- NO
I have created other tax code and tried to use it in MIRO, but system throwing the same message. Is it somehow related to Tax procedure / OSS pack levels?The message Type is ERROR.
Please confirm.
Thanks and Regards
Sagar
Edited by: Sagar Padhye on Nov 5, 2009 3:51 PM

Annual Depreciation Values appear in BW, but Posting Period Values do not

Hello All,
I'm using two BW cubes for fixed asset reporting. They are:
1) 0FIAA_C02 - Period Values
2) 0FIAA_C04 - Annual Values and Transactions
The 0FIAA_C04 cube (Annual Values and Transactions) ties back to R3 for every key figure, including annual depreciation. However, the 0FIAA_C02 cube (Period Values), ties back for most key figures, but does not for any of the depreciation key figures. In fact, all depreciation key figures are zero in this cube for any month. All of characteristics and key figures are fine in 0FIAA_C02.
Any suggestions as to why the 0FIAA_C02 cube display zero for all depreciation values regardless of month or key figure?
Thank you.

Please maintain the batch characterisitcs for the material at the time of Goods receipt for this material.
Or maintain the batch chracteristics in the PO.
Thanks & Regards
Kishore

How to post depreciation to different depreciation areas

Hi,
Can any body explain how to post depreciation to different dep areas other than 01 book dep,
and how to take the reports according GAAP and IAS.
Regards,
prasad

Hi,
When you create depreciation areas like Book, Tax, Costing etc., the system posts values like APC and Depreciation simultaneously in all the areas. You don't need to do any thing.
Just posting values through F-90, F-92, etc and for Depreciation AFABN.
This above holds good as long as you are posting to a single ledger.
The above answer is slightly different in case you are having parallel ledgers. Let me explain by taking an example.
Lets assume you are implementing for an Indian client whose parent compnay is in Dutch.
As per Indian GAAP you need to submit the local reporting on April to March basis and for Ducth Jan - Dec.
Assets in Indian GAAP are capitalised with values including frieght, Installation and trial run till Commencement date lets say @ 20%
Assets in Ducth GAAP are capitalised with only Cost, Frieght & Insurance (This is only an example) and the depreciation rate is 15%.
In this scenario you will be creating two ledgers(IN SAP sense and not the accounting GLs) with different fiscal year variants and will be defining Leding ledger and Non leading ledgers and Ledger Groups.
IN this case lets assueme Indian GAAP is Leading ledger and Dutch GAAP is Non Leading ledger and a ledger Group lets say "LG"
When you post using the transation code FB01L you will be using ledgers or ledger groups that are effecting with this transaction.
If you use the regular T codes without using the Ledger Groups, System posts the transaction to all ledgers simultaneously.
When You want to post the transaction as I said in the above example, you will be using FB01L like capitalising total cost in "LeadingLedger" and upto CIF value to "Non leading ledger"
NOw from the configuration front you will be creating seperate set of Depreciation keys for each GAAP and will be creating a depereciation area for Dutch GAAP.
You will also need to create a derived depreciation area which is the difference of Book Dep Area (as per Leading Ledger) and teh Duthc GAAP depreciation area (Non leading ledger). You can use the Wizard here which will guide you.
For Book depreciation are its always realtime posting and for other areas its periodic posting. i.e. as a monthend process you need to do,
For this you need to run TCODE ASKBN (Periodical posting ) anad AFABN.
ASKBN checks for the difference in APCs, Depreciations, Loss or gain on account of retirements differently for diffrent depreciation areas and posts the values.
When it comes to reporting all Standard reports will give you the flexibility of taking the reports based on Depreciation areas.
You have a TCODE "OARP" where in you will get all the asset related transaction reports.
The above scenerio is explained with an assumption of you using SAP Version above 4.7EE.
Reward if you find this explanation useful.
Sarma

Change in Useful life of asset in mid year, but the previous posted depreciation should not be changed

Dear Experts,
I have a requirement in one of my client, We need to extend the useful life of asset in mid of an asset fiscal year and the depreciation which was posted in the previous should not be changed.
Requirement:
Useful life of asset is to be extended after completing depreciation for 4 years and in-between the current asset fiscal year. Provided the present asset value has to be taken as the new book value of the asset and the depreciation posted henceforth to be posted based on the new asset value till the remaining useful life.
Previously posted depreciation should be unchanged.
Analysis:
1.      The fiscal Year followed - October to September.
2.      The useful life of asset will be changed, and the depreciated value posted till 31/mar 2014 will have the old depreciation value ( based on the original acquisition value)
3.      The Depreciation key used in of type LINR (linear), depreciation value will be calculated based on the Book value till the asset value becomes ZERO at the end of useful life of the asset.
4.      We can change the useful life of the asset at the end of a Asset fiscal year say FY- 2014, if this is done the existing configuration will take the Book value of the asset at the end of the Fiscal as the asset value and the new depreciation will be calculated based on the new useful life of the asset. The asset value will become ZERO at the end of the newly changed Useful Life.
5.      But the requirement is that the useful life of the asset will be changed exactly half way in between existing Asset fiscal (i.e., 31/03/2014), if this is done system will change the depreciation value based on the new useful life ( since the Dep Key is LINR), but the depreciation value will change from the fiscal start say October 2013 to September 2014 ), which will not satisfy the requirement of the client. Since the depreciation which is already posted from October 2013 to March 2014 should not be changed.
Note:
1. We are not willing to retire the asset and create a new asset with the remaining book value as asset value and start depreciation.
Kindly let me know if the requirement can be fulfilled without retiring the asset.

Dear All,
This requirement has been completed.
1. I created New Multi level valuation method with base 26 ( Net book value w/o Revaluation ).
2. New depreciation key was created and the above method was assigned to it. I never changed the Base method.
3. new interval was created in the depreciation area, with this created dep key and extended the useful life of the asset. The depreciation was calculated according to the requirement.
Originally the asset had useful life of 5 Years, I changed the asset useful life to 8 years now with new Depreciation key 2001.
Depreciation was already posted to the asset till 04- 2013 for an amount of 148.27 SAR.
Net Book value carried forward to 2013 = 1575.56 SAR
Depreciation already posted till 4th period =   148.27 SAR
Current Net book value after useful life extension           = 1427.29 SAR .
Now the new depreciation key 2001 with Multilevel method 201, will take this Net-book value as Asset value and will depreciate along the useful life of the asset till it becomes zero.
Planned depreciation of 2013 ( remaining 6 months) = 166.24 SAR
Planned depreciation of 2014 = 225.96 SAR
Planned depreciation of 2015 = 225.96 SAR
Planned depreciation of 2016 = 225.96 SAR
Planned depreciation of 2017 = 225.96 SAR
Planned depreciation of 2018 = 225.96 SAR
Planned depreciation of 2019 = 131.25 SAR
Total      = 1427.29 SAR ( the Asset value becomes zero at the end of its remaining useful life.
The previously posted depreciation from 01.01.2013 to 30.04.2013 was untouched.

Posted depreciation value is missing in Tax dep area

Similar Messages

Maybe you are looking for