POSTING DATE in Accounting Document

Hi All,
I am facing the problem with POSTING DATE in Accounting Document.
Sales Order               25/10/2008
Delivery & PGI           29/10/2008
Billing Doc                05/11/2008
Accounting Doc Date 05/11/2008.
The system picks the PGI Date 29/10/2008 as POSTING Date of Accounting document. It should be 05/11/08.
Please let me know the reason.
Thanks & Regards,
Hemant Patil

Hi
if you are looking accounting document of PGI it must be on 29th because material movement have done on 29th through PGI (it is accounting document for material movement not for invoicing)
if helpful then give points

Similar Messages

How to change Posting Date in Accounting Document

Dear All,
Query: While Releasing Invoice Document (BL) for Account Posting, How can we change the Posting Date for Accounting Document (AB)?
Explanation: User has created one Invoice on 26.02.2009. that time, Because of Missing Foreign Trade Data, No Accounting Document had been generated. Now, if today i.e. 10.03.2009, I maintain Foreign Trade Data and Release Invoice for Account Posting, The Accounting Document will be posted as on Today's Date, i.e. 10.03.2009.
User's requirement is the Invoice Document (BL) Date and Accounting Document (AB) Date must be same, i.e. 26.02.2009.
It shouldn't be like Invoice is getting generated on 26.02.2009 and Accounting Document is getting posted on 10.03.2009.
Thanks in Advance.
Amit

Dear Michael,
It was a User confusion with Creation Date of Invoice, Billing Date of Invoice and Posting date of Accounting Document.
User had created Invoice on some 01.03.2009 but Kept Billing Date as 26.02.2009. So, while released Accounting Doc. on 10.03.2009 (Releasing date and not Posting Date), It gets Posted on 26.02.2009, only, and not on 10.03.2009.
The whole confusion was:
When User refers Document Flow (for Invoice in VF02), System shows Invoice Date as 01.03.2009, against Accounting Posting Date 26.02.2009.
Whereas,
When I showed FBL5N to user, BL Document and AB Document both get posted on 26.02.2009 only.
Its Clear now.
Best Regards,
Amit

Implications of Changing Posting date of parked document.

Hi,
I have changed the posting date, document date & translation date to current period
of an already parked document in a closed period.
(e.g) Document parked in month of 28.04.2009(closed period) & i have changed the dates to
28.05.2009(current period)
I need to know what are the implications of the changes in dates for (posting date, document date & translation date) induvidually for both the periods(closed & current).
Thanks
Kenn

Hi,
There is no implications of change the the posting date of parked document because parked documents are not affected in financial.When you post the doucment then it will affect in finance.so there is no problem. You can change the posting date or document date only in a Fiscal year.

Need BAPI to update posting date for parked documents in transaction FBV2?

Hi All,
I am retrieving records from table VBKPF and I have to update the posting date for parked documents in transaction FBV2.
I am doing it with BDC , working fine in foreground, but it is not workung fine in back ground.I want to do this with bapi.
Can any one suggest me corrct BAPI?
TYPES : BEGIN OF It_vbkpf,
         bukrs LIKE vbkpf-bukrs,            "Company Code
         belnr LIKE vbkpf-belnr,            "document number
         gjahr LIKE vbkpf-gjahr ,           "Fiscal year
         budat LIKE vbkpf-budat,            "Posting date
         bldat LIKE vbkpf-bldat,            "Document date
         blart LIKE vbkpf-blart,            "Document type
         xblnr LIKE vbkpf-xblnr,            "Reference
         tcode LIKE vbkpf-tcode,            "Transaction Code
         bktxt LIKE vbkpf-bktxt,            "Document header text
         usnam LIKE vbkpf-usnam,            "User Name
         xwffr LIKE vbkpf-xwffr,            "Release necessary
         xprfg LIKE vbkpf-xprfg,            "Document complete
         xfrge LIKE vbkpf-xfrge,            "Release takes place
        END OF it_vbkpf.
Thanks,
Suresh.

Hi ,
Thanks for your response.
PRELIMINARY_POSTING_UPDATE seems working good,But my requirement here , to update the posting date with last working day . how can i do this?
thanks,
Suresh.

Report to get correct posting date of material document?

I have material number (matnr) and plant (werks). Which report do I use to get posting date of material document (mkpf-budat) ? Thanks!

Hi,
Use MB51 or MB5B as per your convenience.U will get the Matl Doc,Mov Type & Posting Date.
Award points if helpful
Thanks & Regards
Saeed Arif

Depreciation posted,but no accounting document generated

Dear Experts,
i have run the depreciation, it is sowing in AW01N posted, but no accounting document generated with document type AF.
Please Suggest!!!!
Many thanks
Naru

Hi Naru,
I'm not sure what version of SAP you are on however you could try and identify the documents posted from the depreciation run from transaction AFBP.

Change Posting Date in the Document (BUDAT) in VL02N

Hello everyone.
In the VL02N transaction, when I push the "Post Goods Issue" button to create the Material Document, the system puts in the BUDAT field (Posting date in the document) in the MKPF table the value of today (sy-datum). I need to change this value but I can´t find an user-exit that let me do it.
Any idea?
Thank so much.

I finally found a badi: LE_SHP_GOODSMOVEMENT.
Goodbye.

Posting date to accounting for billing document

Dear Experts
In SD cycle, we have created billing document in first quarter. As per our customization settings the billing document was created with Posting block.
Now today i.e. in second quarter we want to release this billing document to accounting without opening the posting period for FI/CO. i.e. we want to release the billing document to accounting in current period. How to manage this??
Also I have another query, Billing document created in first Quarter is having one exchange rate (e.g. EXQ1). Let say current exchange rate is EXQ2.
Now when we release the same billing document today i.e. in second quarter, which exchange rate will be applicable to that billing document EXQ1 or EXQ2 ??
Thanx in advance
Kailash

Dear Prashant
It is Posting Date only. You dont find this field in invoice but you can see in accounting document. The table is BKPF - Field Name BUDAT. Once you apply the user exit ZXVVFU01 and click on the green flag in VF02, system will propose to input a date. Whatever date you enter here, it will be updated in the above field. Of course, you cannot input a date here for which FI period is closed.
Take the help of ABABer and give this logic. He will fulfill your requirement.
thanks
G. Lakshmipathi

Posting date in Dunning Document

Hello Everybody,
I need to know how I can put my desired posting date in a dunning document ,which is generated through tcode FPVA and FPVB. As of now it is automatically taking the present date(date at which tranaction is run) as posting date.
It would be of great help if you can help me out in this.
Thanks in advance
Kunal

Hi:
During the Dunning Proposal, you can set your own date. The details are as
1. Dunning Proposals
The dunning proposal examines the customers contract account for open items and applies the rules established by the customers dunning procedure to these items. The output of this process is a proposal (a list of accounts with the proposed actions) which identifies the actions which will be enacted by the activity run. This proposal allows the user to review the list of business partners who should not be included in the run and to reverse them out of the proposal.
Transaction FPVA requires the user to input a date and initial to identify the particular run. Upon entry, the system allows the user to identify the options for the proposal. These parameters can include general items such as a specific range of contracts, contract accounts, business partners, companies or general items. Once these general parameters are determined (It is acceptable to leave them all blank and run against all accounts) the specific dunning parameters are input which define the date of issue , open item due dates to be considered, and ranges of dunning procedures to be considered. The date of issue and the open item due date are the key data for these procedures. The remaining tabs control parallel processing and the level of detail in the program logs. The level of detail in the logs should be limited as a large number of entries can be generated from a single proposal. The selection entries should be saved and the proposal should be scheduled for execution.
SAP Easy Access→ Utility Industry →Contract Accounts Receivable and Payable →Periodic Processes→ For Contract Accounts →Dunning Notice →Dunning Proposal Run (Transaction FPVA).
2. Dunning activity
The activity run can not be performed unless a proposal exists. The system uses existing proposals as input for the activity. The activity run executes all actions identified by the dunning procedure for those customers remaining in the proposal.
SAP Easy Access→ Utility Industry →Contract Accounts Receivable and Payable →Periodic Processes→ For Contract Accounts →Dunning Notice →Dunning Activity Run (Transaction FPVB)
This includes:
Generating the identified collection letters.
Generating disconnect service orders.
Identifying and initiating the delivery of accounts to third party collection agencies.
The identification of candidates for write-off.
The updating of customers creditworthiness totals.
Generate lien placement warning letter (addressed to premises owner).
Hopefully it would be helpful.
Regards
Shashi

Billing document date and accounting document date varying...

Hello Experts,
There is one billing document and the date of invoice is, say today, 12/01/2009. and the accounting document date is, say 15 days ahead or behind, 27/01/2009.however, the posting date is proper and according to the billing date and that is again dated today-12/01/209. Now, the user wants to know why the difference exists between the accounting document date and the billing date. any idea? there are some user exits being used but I cant make out, neither the abaper. suggestions please.
Regards,
N.Raja Sekhar.

Dear Raja Sekhar
Document date is nothing but the date on which that particular transaction has taken place. But I dont know where you get the date as 27-01-2009.
It is a general practice that for exports billing document, there would be a Posting block and once the exporter receives the B/L, based on that date, the billing document would be released manually. For this, there is an user exit to input the B/L number and date and release the billing document.
So here, what the end users normally does is that the B/L Date might be on 02-01-2009 but he would not have updated on the same date. At a later date, say on 12-01-2009, he can input the B/L Date (in another words, it is Posting date) as 02-01-09 and execute the billing document.
If you see the accounting document here, the posting date would have been 02-01-2009 but the document date would be 12-01-09.
thanks
G. Lakshmipathi

Baseline date in Accounting document changed after creation of Invoice List

Hi all,
1) User Requirement:-
Creation of Invoice document(using VF01), Transfer u201CGoods Issue Dateu201D to FI accounting as a Baseline date instead of Invoice creation date.
To meet the above requirement I did enhancement name: SDVFX008 user exit: EXIT_SAPLV60B_008.
Its working fine and transfered goods issue date to Accounting(as baseline date) insted of invoice date.
2) Problem:-
After Creation of Invoice List (VF21) system again overwriting baseline date iwith invoice list date.
Does anyone know how to Stop overwriting baseline date in accounting while creation of invoice list.
Thanks & Regards
Sudheer

Hi Valerie,
do you recall the User Exit?
Thanks

Error in Posting Excise Invoice - Accounting document not generated !

Hi,
We have done the GR using MIGO-Only Part I, captured in the Excise Invoice using J1IEX and these two transactions are OK.
While we are trying to post the Excise Invoice, the system is displaying the following error:
Accounting document not generated!
Message no. 4F186
Please guide.
Please note that we are running the transaction in the Pre-production server for the very first time.
Also would like to know what all reports I should run related with Excise. Someone told me that I should run the T Code J1I5 & J2I5 to update the RG23 register the next day of the transaction the entry related with excise is not updated on the same day. I think the updation of register should be automatic
Regards,

Hi,
I am repeating my Process/Question:
We have Created a Purchase Order with Tax Code (JMOP) related with Excise (Cenvatable).
We did the Goods Receipt (MIGO-> Only Part 1)
We did the Capture Invoice (J1IEX).
Till here every thing is OK.
While Posting the Excise Invoice (J1IEX), the system is giving the follwoing error:
Accounting document not generated!
Message no. 4F186
On Simulation window, the System is displaying the following CENVAT Posting:
24820020           Dr.      1,058.00
24820000           Dr.      105,840.00
24820010           Dr.      2,117.00
13113920           Dr.     109,015.00
But when we click on the Post CENVAT Button, the system is displaying the message "Accounting document not generated !" and exits.
Please guide.
Please note that we are running this Transaction on the Pre-production Server; On the Development Server it is working fine.
Regards,

Posting date of Dunning document

Hello Everybody,
I need to know how I can put my desired posting date in a dunning document ,which is generated through tcode FPVA and FPVB. As of now it is automatically taking the present date(date at which tranaction is run) as posting date.
It would be of great help if you can help me out in this.
Thanks in advance
Kunal
My apologies for posting the same message twice
Message was edited by:
Kunal Handa

Hi Kunal
In dunning in FICA there are two dates, the first one is the issue date. This can be chosen in FPVA and is the key date for which dunning notice. Next to that you've got the print date, and that is the date on which the activity is executed. You cannot choose this date, the system decides it automatically at the time of execution of the dunning activity run. And I do not think that this can be changed.
So I think you should use the issue date.
Best regards,
Dimitri Vandenborn

BAPI to change the posting data of invoice document

Hello All,
I need a BAPI to change the posting date of the invoice document (Type : RE, Generated from MIRA transaction). Do let me know if you can across a BAPI to do it.
Thanks,
Siva.

BAPI_INCOMINGINVOICE_CHANGE

Invoice Posting with two accounting documents for Service PO

Hi Gurus,
We have created one service (GR based Invoice verification) PO for which we have assigned a costcenter which has been created for different company code(rather than what company code we have mentioned in PO).
Now during Invoice creation out of 6 invoice entries only one Invoice has been created with two accounting documents for two different company codes, when we found this and canceled the same only basic entries has been reversed.
I just wanted to know how this single invoice has been created with two different accounting documents for two different company codes.
Please guide me in this regard.
Thanks and Regards,
Ravindra C.M

Hi Aasif,
Thanks for your reply, if that would have been case then each Invoice created for that PO should have two accounting documents but out of 6 invoice created only one invoice has been created with two accounting documents.
I am completely agree with you that it has posted as inter-company transfer but why only one invoice has been created with two accounting documents.
In addition to the above I just wanted to know if for GR-based invoice verified PO if we create a Invoice before creating service entry sheet whether two accounting documents will be created as we have mentioned different company code costcenter.
Please guide me in this regard.
Thanks and Regards,
Ravindra C.M

POSTING DATE in Accounting Document

Similar Messages

Maybe you are looking for