Posting Journal Entry in v4.2SP4: Strange Issue. Anyone?

Behaviour:
The post button doesn't work. You can click it but it does nothing
When opening the journal manager and selecting the journal id and then posting, it says: "You cannot post/unpost until finishing journal post"
After this, you cannot post any journal entry on any application.
(multiserver environment)
Has anyone had this behaviour?

Hello Muhd
Please could you go in Administartion > Set Up > Fixed assets > GL
Account Detemination and check the settings of 'Clearing Acc. Asset
Acquisition' account, which is used when creating Journal Entry for
'Acquisition without vendor'.
Could you check if there is a 'Default VAT Code' assigned to this
account. In this case could you to clear the Default VAT Code assigned
to this account and try to do 'Acquisition without vendor' again?
Also,please try to check below option to see if that could help:
1)Check asset Class Land
2)Check GL accounts settings
3)Check the checkbox "Permit Other VAT Group"
Regards,
Syn Qin
SAP Business One Forums Team

Similar Messages

Add Customer Field while posting Journal Entry

BSEG-KUNNR is not exposed while posting journal entry using FB01. It is not available in the field status group also. How to add customer number field in the field status group to make it available during posting journal entry using FB01.

Hi Jac,
1, There is a known issue in a lower version before 2005A SP01 PL30when you try to run a retirement operation for a fixed asset with Net Price equal to the Net Book Value, it failed and you got the following error message:
21141 error while posting journalentry: -5012 /Unbalanced Transaction.
If you are in this scenario, please upgrade your Fixed Assest to the latest patch.
2. If you are not in above scenario, this problem is possibly caused by the incorrect configuration of accounts in G/L
Account Determination.
There should not be 'Default VAT Group' related to these accounts except for account 'Default Revenue Acc. Retirement' in G/L Account Determination.
1) Go to Administration - Setup - Fixed Assets - Open G/L Account Determination;
2) Select an Account Determination Group;
3) Under the G/L Account Determination window, open the account linked to 'Balance Sheet of Asset Acc.' by clicking on the yellow arrow;
3) The Chart of Accounts window will open, click on the'Account Details' button beneath the window to open G/L Account Details;
4) Empty the field 'Default VAT Code';
5) Execute the Retirement functionality again.
You can also refer to SAP Note 1050423 for reference. https://service.sap.com/sap/support/notes/1050423
I hope it is helpful!
Regards,
Ivy Zhang
SAP Business One Forums Team

"21141: Error while posting journal entry :-10 / Internal error"

Hi All,
I'm want to dispose fixed asset by using retirement function in Fixed asset module. Anyone know the solution for this error message "21141: Error while posting journal entry :-10 / Internal error". Please help me.
Thanks in advance.
uddin

Hello Muhd
Please could you go in Administartion > Set Up > Fixed assets > GL
Account Detemination and check the settings of 'Clearing Acc. Asset
Acquisition' account, which is used when creating Journal Entry for
'Acquisition without vendor'.
Could you check if there is a 'Default VAT Code' assigned to this
account. In this case could you to clear the Default VAT Code assigned
to this account and try to do 'Acquisition without vendor' again?
Also,please try to check below option to see if that could help:
1)Check asset Class Land
2)Check GL accounts settings
3)Check the checkbox "Permit Other VAT Group"
Regards,
Syn Qin
SAP Business One Forums Team

BAPI for Posting Journal Entries

hi,
I need a BAPI or IDOC for Posting Journal entries. It should have the following values at header level.
1. Header Text
2. Doc Type
3. Journal Type
4. Posting Date
5. Doc date
6. Rev reason
7. Reversal date
At line item level it should have following values:
company code
material type
material origin group
Profit center
SKF value
Inventory Balance
Thanks,
Payal

Hi,
U can use BAPI_ACC_DOCUMENT_POST
is there any particular txn for which u r looking bapi?
thanks
RK

Not able to post Journal Entry in Hyperion

We try to post an entry in Journal Task, but not save or post, and also receive "voilated integrity constraints on column table"... Any idea?
Edited by: user9102824 on May 7, 2010 9:50 AM

Is the issue happening on a database that was created using the copyapp utility? If so, check out the artcile below in the Metalink KB (which essentially states to patch the software and/or try a newer version of the copyapp utility).
*"Value violated the integrity constraints for a column or table" errors in HsvEventLog.log after copying an HFM application between two Oracle databases [ID 746562.1]*

PARK & POST Journal Entry and auto reversal

Dear All,
Our auditors has offered the following changes to be implemented in SAP system.
1. JE approval: Configure the system functionality to place journal entries in a u201Choldu201D status when entered into the system, then the supervisor/manager review and approval then required to release the journal entry from the u201Choldu201D status and post the entry to the general ledger. The reviewer should not have the ability to initiate a journal entry.
2. JE reversals: Utilize the functionality to automatically reverse journal entries, booked in prior month as u201Creversing,u201D when new period is opened.
3. 3-way match: Utilize the SAP functionality to perform an automated 3-way match process between invoice, purchase order, and goods receiving documentation. If invoices meet the 3-way match criteria based on established variance thresholds, invoices should automatically be approved for payment. If variances are noted, which exceed tolerance thresholds set by Management within the system, work flows should be used within the system to automatically route the invoice for the require approval.
How this changes can incorporated in the system.
Do suggest.
Regards,

For point 1, there is a functionality in SAP where all parked documents will be blocked and then released by the authorized person. There is a standard workflow for that. You may want to check Make and CHeck Settings for Document Parking. If this doesn't satisfy, then there's a need to create a customized workflow. Plus authorizations must be checked so that the users will not be able to Post but only Park. Note that, there is another functionality in Document posting called "Hold" this one, system doesn't assign any financial document. You can assign any reference/number to the document.
For point 2, there is a Mass Reversal functionality in SAP called the F.80. For accruals, you may use FBS1 which you can input the reversal date and run F.81 to run the reversal.
For point 3, it is a standard SAP functionality. You must set tolerance as to qty or price variance and the system automatically blocks the invoice for posting and the authorized person is required to release the approved invoices to remove the block for payment. In SAP, when you enter the PO for a particular invoice, it will give you how much or how many is actually goods received for that particular PO. in that sense you will be able to see whether the invoice is completely billed for the whole PO or not.

Post journal entry automatically when a certain account is posted

Dear all,
Thanks for your attention.
I would like to post an Journal entry automatically at the same time (or just after) a certain account is posted.
Certain account means an account ID for Payment Difference of Payment for Invoice.
I would like to reverse payment difference amount and post same amoount with another account ID.
What we need to do is to catch the event of each posting and if find the account ID, post another journal entry by using action "post".
But I have no idea where to catch posting occurs.
Could you tell me if anyone know what I should do for this?
If you need more info, please ask.
Thanks,
Mai

Hi Mai,
If you go to General ledger work center and click on Journal Entries view.
Here you can do advance filter and find the journal entry type of posting ( Cash Disbursement for instance) and you can make a note of the diff amount that got posted may be due to payment difference/exchange rate diff etc.,
(One way of finding out which is the journal entry id, you can find this id by going to invoicing & in its document flow.)
Now create a manual Journal entry voucher for this diff account and as you want to move this to another account, select it as offsetting.
Thanks
Lokesh Sharma

FSCM 9.0: COBOL Process GLPPPOST does not post Journal Entry correctly

Folks,
Hello. I am workin on FSCM 9.0 General Ledger module. "Edit Journal" is AE program that works correctly. But "Post Journal" is a COBOL program that does not works correctly.
COBOL process GLPPPOST posts only debit accounts of a Journal entry into table PS_LEDGER but does not post credit accounts of a Journal Entry into table PS_LEDGER. When run the Ledger Report, the report has only column headers and has no data.
Does FSCM 9.0 have a problem or COBOL process does not work correctly ? Can any folks help me ? Thanks.

Folks,
Hello. Thanks a lot for replying.
I linked my Ledger Group RECORDING with my Business Unit BU01 using "Set Up Financials/Supply Chain > Business Unit Related > Ledgers For A Unit". Then linked UserID VP1 with BU01 in User Preference. I have checked all information about the 3 concepts (VP1, BU01 and RECORDING) and don't see anything wrong.
I suspect the problem is in the Journal Line page because its Chartfileds belong to 2 SetID (SHARE and FEDRL) and 2 Business Unit (BU01 and BU02).
When define Chartfields value using "Setup FSC > Common Definition > Design Chartfield > Define Value", I see Chartfields "Fund", "Class" and "Program" with SetID "FEDRL", and other Chartfields with SetID "SHARE". The 2 SetIDs are default in the system.
Because one Business Unit (BU01) can link to only one SetID (SHARE), I create one more Business Unit BU02 and linked with SetID "FEDRL". Thus, when create a Journal entry using "General Ledger > Journal > Create Journal ", we type in Business Unit (BU01) and Ledger Group (RECORDING) in Header page, but in Line page, some of Chartfields link with SetID SHARE and BU01, and some of Chartfields link with SetID FEDRL and BU02. The journal entry indicates "Inter/Intra Unit Journal". When select "Edit Journal" and click "Process", the message comes up as follows:
"Ledger Group RECORDING is not valid for Business Unit BU01. Ledger Group defined for this journal is not valid for the Business Unit BU01".
My question is: That the Chartfields in Journal Line page link with 2 SetIDs and 2 Business Units causes the above error ? Can any folks help ? Thanks.

Re: Prevent to Post Journal entries

Hello,
I have a scenario to share with you all.
This is regarding journal entry postings during close periods. The Business Units will submit the data, check for errors and make adjustments. They continue to do these steps during the close process. However, the corporate want to prevent the Business Units from posting the journal entries. But the business units can mke a journal and save the journal entries.
After few days corporate will let them post the journal entries they saved the system.
Is BPC work status is the best way to control this process? Can anyone say what specific steps (beyond the work status set up in BPC) to be included in the system to achieve this?
Please respond.
Kind regards,
RJ

Hi Rosa,
Create a work state, say Locked. In that work state, mention locked for all the interfaces, including JRN. Now, once the period is closed, then the assigned person will change the work status to Locked for this particular period.
Please refer to the below links from help.sap for further details,
http://help.sap.com/saphelp_bpc75_nw/helpdata/en/f8/d51b881cfa4c5992de481ccfa05db3/content.htm
http://help.sap.com/saphelp_bpc75_nw/helpdata/en/75/712b5c7be845cbb1e76cfe78650343/content.htm
http://help.sap.com/saphelp_bpc75_nw/helpdata/en/8c/8529da752f4dc8a5148f095f15fdab/content.htm
Hope this helps.

Error while posting journal entry: -5012/unbalanced transaction

Hi everyone,
I got this error message when trying to add a FA Retirement. FA is dated 26.May.08, depreciated for the month of May 2008 and would like to be retired on 01.June.08 (sale with customer).
FA G/L Account Determination is completely defined.
Would appreciate any reply. Thanks in advance!
Jac

Hi Jac,
1, There is a known issue in a lower version before 2005A SP01 PL30when you try to run a retirement operation for a fixed asset with Net Price equal to the Net Book Value, it failed and you got the following error message:
21141 error while posting journalentry: -5012 /Unbalanced Transaction.
If you are in this scenario, please upgrade your Fixed Assest to the latest patch.
2. If you are not in above scenario, this problem is possibly caused by the incorrect configuration of accounts in G/L
Account Determination.
There should not be 'Default VAT Group' related to these accounts except for account 'Default Revenue Acc. Retirement' in G/L Account Determination.
1) Go to Administration - Setup - Fixed Assets - Open G/L Account Determination;
2) Select an Account Determination Group;
3) Under the G/L Account Determination window, open the account linked to 'Balance Sheet of Asset Acc.' by clicking on the yellow arrow;
3) The Chart of Accounts window will open, click on the'Account Details' button beneath the window to open G/L Account Details;
4) Empty the field 'Default VAT Code';
5) Execute the Retirement functionality again.
You can also refer to SAP Note 1050423 for reference. https://service.sap.com/sap/support/notes/1050423
I hope it is helpful!
Regards,
Ivy Zhang
SAP Business One Forums Team

Unbalance transaction Error - Journal Entry Posting

Hi all,
Good afternoon. i posted journal entry using DI -API. I have two Journal Entry when i add the first journal Entry added the second journal entry not added its show the Error Unbalanced transaction
Each Journal Entry have 2 lines
I am using 8.8 patch Level 12
Please anyone help me out of this issue
Edited by: lakshmi narayanan on Oct 19, 2011 9:11 AM

Hi Jitin,
Did you solved this issue? I just have the same problem with SAP Business One 2007 A (8.00.181) SP: 00 PL: 47
Here my oJournalEntry XML before Add.
You can see that Debit amount is equal to Credit amount (highlited with red)
I would like to receive some suggestions.
<?xml version="1.0" encoding="UTF-16"?>
<BOM>
<BO>
<AdmInfo>
<Object>30</Object>
</AdmInfo>
<OJDT>
<row>
<BatchNum>0</BatchNum>
<TransId>0</TransId>
<BtfStatus>O</BtfStatus>
<TransType>-1</TransType>
<BaseRef/>
<RefDate>20140104</RefDate>
<Memo>AS400-89532</Memo>
<Ref1/>
<Ref2/>
<CreatedBy>0</CreatedBy>
<LocTotal>0.000000</LocTotal>
<FcTotal>0.000000</FcTotal>
<SysTotal>0.000000</SysTotal>
<TransCode/>
<OrignCurr/>
<TransRate>0.000000</TransRate>
<BtfLine>0</BtfLine>
<TransCurr/>
<Project/>
<DueDate/>
<TaxDate>20140104</TaxDate>
<PCAddition>N</PCAddition>
<FinncPriod>0</FinncPriod>
<DataSource>N</DataSource>
<UpdateDate/>
<CreateDate/>
<UserSign>0</UserSign>
<UserSign2>0</UserSign2>
<RefndRprt>N</RefndRprt>
<LogInstanc>0</LogInstanc>
<ObjType>30</ObjType>
<Indicator/>
<AdjTran>N</AdjTran>
<RevSource>N</RevSource>
<StornoDate/>
<StornoToTr>0</StornoToTr>
<AutoStorno>N</AutoStorno>
<Corisptivi>N</Corisptivi>
<VatDate/>
<StampTax>N</StampTax>
<Series>1543</Series>
<Number>0</Number>
<AutoVAT>N</AutoVAT>
<DocSeries>0</DocSeries>
<FolioPref/>
<FolioNum>0</FolioNum>
<CreateTime>0</CreateTime>
<BlockDunn>N</BlockDunn>
<ReportEU>N</ReportEU>
<Report347>N</Report347>
<Printed>N</Printed>
<BaseTrans>0</BaseTrans>
<U_MIGSAP_KEY/>
<U_YVA_RENDI/>
<U_YVA_NUMREN>0</U_YVA_NUMREN>
<U_YVA_ANULADO/>
</row>
</OJDT>
<JDT1>
<row>
<TransId>0</TransId>
<Line_ID>0</Line_ID>
<Account>12121</Account>
<Debit>0.000000</Debit>
<Credit>0.000000</Credit>
<SYSCred>0.000000</SYSCred>
<SYSDeb>0.000000</SYSDeb>
<FCDebit>0.000000</FCDebit>
<FCCredit>863.420000</FCCredit>
<FCCurrency>USD</FCCurrency>
<DueDate>20140104</DueDate>
<SourceID>0</SourceID>
<SourceLine>0</SourceLine>
<ShortName>C10211220550</ShortName>
<IntrnMatch>0</IntrnMatch>
<ExtrMatch>0</ExtrMatch>
<ContraAct>C10211220550</ContraAct>
<LineMemo>AS400-89532</LineMemo>
<Ref3Line/>
<TransType>-1</TransType>
<RefDate/>
<Ref2Date/>
<Ref1/>
<Ref2>89532</Ref2>
<CreatedBy>0</CreatedBy>
<BaseRef/>
<Project/>
<TransCode/>
<ProfitCode/>
<TaxDate/>
<SystemRate>0.000000</SystemRate>
<MthDate/>
<ToMthSum>0.000000</ToMthSum>
<UserSign>0</UserSign>
<BatchNum>0</BatchNum>
<FinncPriod>0</FinncPriod>
<RelTransId>-1</RelTransId>
<RelLineID>-1</RelLineID>
<RelType>N</RelType>
<LogInstanc>0</LogInstanc>
<VatGroup/>
<BaseSum>0.000000</BaseSum>
<VatRate>0.000000</VatRate>
<Indicator/>
<AdjTran>N</AdjTran>
<RevSource>N</RevSource>
<ObjType>30</ObjType>
<VatDate/>
<PaymentRef/>
<SYSBaseSum>0.000000</SYSBaseSum>
<MultMatch>0</MultMatch>
<VatLine>N</VatLine>
<VatAmount>0.000000</VatAmount>
<SYSVatSum>0.000000</SYSVatSum>
<Closed>N</Closed>
<GrossValue>0.000000</GrossValue>
<CheckAbs>0</CheckAbs>
<LineType>0</LineType>
<DebCred/>
<SequenceNr>0</SequenceNr>
<StornoAcc/>
<BalDueDeb>0.000000</BalDueDeb>
<BalDueCred>0.000000</BalDueCred>
<BalFcDeb>0.000000</BalFcDeb>
<BalFcCred>0.000000</BalFcCred>
<BalScDeb>0.000000</BalScDeb>
<BalScCred>0.000000</BalScCred>
<IsNet>Y</IsNet>
<DunWizBlck>N</DunWizBlck>
<DunnLevel>0</DunnLevel>
<DunDate/>
<TaxType>0</TaxType>
<TaxPostAcc>N</TaxPostAcc>
<StaCode/>
<StaType>0</StaType>
<TaxCode/>
<ValidFrom>19000101</ValidFrom>
<GrossValFc>0.000000</GrossValFc>
<LvlUpdDate/>
<U_BPP_CTAD/>
<U_BPP_CTAPAT/>
<U_BPP_DCCD>0</U_BPP_DCCD>
<U_BPP_DCPR>N</U_BPP_DCPR>
<U_INFOPE01/>
<U_INFOPE02/>
<U_INFOPE03/>
<U_InfoCo01/>
<U_YVA_TIENDA/>
<U_YVA_UNDTRANS/>
<U_YVA_FECDOC/>
<U_HYP_Status>3</U_HYP_Status>
<U_HYP_BofEx400>89532</U_HYP_BofEx400>
<U_HYP_Closed>N</U_HYP_Closed>
</row>
<row>
<TransId>0</TransId>
<Line_ID>0</Line_ID>
<Account>12311</Account>
<Debit>0.000000</Debit>
<Credit>0.000000</Credit>
<SYSCred>0.000000</SYSCred>
<SYSDeb>0.000000</SYSDeb>
<FCDebit>431.710000</FCDebit>
<FCCredit>0.000000</FCCredit>
<FCCurrency>USD</FCCurrency>
<DueDate>20140203</DueDate>
<SourceID>0</SourceID>
<SourceLine>0</SourceLine>
<ShortName>C10211220550</ShortName>
<IntrnMatch>0</IntrnMatch>
<ExtrMatch>0</ExtrMatch>
<ContraAct>C10211220550</ContraAct>
<LineMemo>LT-268302</LineMemo>
<Ref3Line/>
<TransType>-1</TransType>
<RefDate/>
<Ref2Date/>
<Ref1/>
<Ref2>268302</Ref2>
<CreatedBy>0</CreatedBy>
<BaseRef/>
<Project/>
<TransCode/>
<ProfitCode/>
<TaxDate/>
<SystemRate>0.000000</SystemRate>
<MthDate/>
<ToMthSum>0.000000</ToMthSum>
<UserSign>0</UserSign>
<BatchNum>0</BatchNum>
<FinncPriod>0</FinncPriod>
<RelTransId>-1</RelTransId>
<RelLineID>-1</RelLineID>
<RelType>N</RelType>
<LogInstanc>0</LogInstanc>
<VatGroup/>
<BaseSum>0.000000</BaseSum>
<VatRate>0.000000</VatRate>
<Indicator/>
<AdjTran>N</AdjTran>
<RevSource>N</RevSource>
<ObjType>30</ObjType>
<VatDate/>
<PaymentRef/>
<SYSBaseSum>0.000000</SYSBaseSum>
<MultMatch>0</MultMatch>
<VatLine>N</VatLine>
<VatAmount>0.000000</VatAmount>
<SYSVatSum>0.000000</SYSVatSum>
<Closed>N</Closed>
<GrossValue>0.000000</GrossValue>
<CheckAbs>0</CheckAbs>
<LineType>0</LineType>
<DebCred/>
<SequenceNr>0</SequenceNr>
<StornoAcc/>
<BalDueDeb>0.000000</BalDueDeb>
<BalDueCred>0.000000</BalDueCred>
<BalFcDeb>0.000000</BalFcDeb>
<BalFcCred>0.000000</BalFcCred>
<BalScDeb>0.000000</BalScDeb>
<BalScCred>0.000000</BalScCred>
<IsNet>Y</IsNet>
<DunWizBlck>N</DunWizBlck>
<DunnLevel>0</DunnLevel>
<DunDate/>
<TaxType>0</TaxType>
<TaxPostAcc>N</TaxPostAcc>
<StaCode/>
<StaType>0</StaType>
<TaxCode/>
<ValidFrom>19000101</ValidFrom>
<GrossValFc>0.000000</GrossValFc>
<LvlUpdDate/>
<U_BPP_CTAD/>
<U_BPP_CTAPAT/>
<U_BPP_DCCD>0</U_BPP_DCCD>
<U_BPP_DCPR>N</U_BPP_DCPR>
<U_INFOPE01/>
<U_INFOPE02/>
<U_INFOPE03/>
<U_InfoCo01/>
<U_YVA_TIENDA/>
<U_YVA_UNDTRANS/>
<U_YVA_FECDOC/>
<U_HYP_Status>3</U_HYP_Status>
<U_HYP_BofEx400>268302</U_HYP_BofEx400>
<U_HYP_Closed>N</U_HYP_Closed>
</row>
<row>
<TransId>0</TransId>
<Line_ID>0</Line_ID>
<Account>12311</Account>
<Debit>0.000000</Debit>
<Credit>0.000000</Credit>
<SYSCred>0.000000</SYSCred>
<SYSDeb>0.000000</SYSDeb>
<FCDebit>431.710000</FCDebit>
<FCCredit>0.000000</FCCredit>
<FCCurrency>USD</FCCurrency>
<DueDate>20140305</DueDate>
<SourceID>0</SourceID>
<SourceLine>0</SourceLine>
<ShortName>C10211220550</ShortName>
<IntrnMatch>0</IntrnMatch>
<ExtrMatch>0</ExtrMatch>
<ContraAct>C10211220550</ContraAct>
<LineMemo>LT-268303</LineMemo>
<Ref3Line/>
<TransType>-1</TransType>
<RefDate/>
<Ref2Date/>
<Ref1/>
<Ref2>268303</Ref2>
<CreatedBy>0</CreatedBy>
<BaseRef/>
<Project/>
<TransCode/>
<ProfitCode/>
<TaxDate/>
<SystemRate>0.000000</SystemRate>
<MthDate/>
<ToMthSum>0.000000</ToMthSum>
<UserSign>0</UserSign>
<BatchNum>0</BatchNum>
<FinncPriod>0</FinncPriod>
<RelTransId>-1</RelTransId>
<RelLineID>-1</RelLineID>
<RelType>N</RelType>
<LogInstanc>0</LogInstanc>
<VatGroup/>
<BaseSum>0.000000</BaseSum>
<VatRate>0.000000</VatRate>
<Indicator/>
<AdjTran>N</AdjTran>
<RevSource>N</RevSource>
<ObjType>30</ObjType>
<VatDate/>
<PaymentRef/>
<SYSBaseSum>0.000000</SYSBaseSum>
<MultMatch>0</MultMatch>
<VatLine>N</VatLine>
<VatAmount>0.000000</VatAmount>
<SYSVatSum>0.000000</SYSVatSum>
<Closed>N</Closed>
<GrossValue>0.000000</GrossValue>
<CheckAbs>0</CheckAbs>
<LineType>0</LineType>
<DebCred/>
<SequenceNr>0</SequenceNr>
<StornoAcc/>
<BalDueDeb>0.000000</BalDueDeb>
<BalDueCred>0.000000</BalDueCred>
<BalFcDeb>0.000000</BalFcDeb>
<BalFcCred>0.000000</BalFcCred>
<BalScDeb>0.000000</BalScDeb>
<BalScCred>0.000000</BalScCred>
<IsNet>Y</IsNet>
<DunWizBlck>N</DunWizBlck>
<DunnLevel>0</DunnLevel>
<DunDate/>
<TaxType>0</TaxType>
<TaxPostAcc>N</TaxPostAcc>
<StaCode/>
<StaType>0</StaType>
<TaxCode/>
<ValidFrom>19000101</ValidFrom>
<GrossValFc>0.000000</GrossValFc>
<LvlUpdDate/>
<U_BPP_CTAD/>
<U_BPP_CTAPAT/>
<U_BPP_DCCD>0</U_BPP_DCCD>
<U_BPP_DCPR>N</U_BPP_DCPR>
<U_INFOPE01/>
<U_INFOPE02/>
<U_INFOPE03/>
<U_InfoCo01/>
<U_YVA_TIENDA/>
<U_YVA_UNDTRANS/>
<U_YVA_FECDOC/>
<U_HYP_Status>3</U_HYP_Status>
<U_HYP_BofEx400>268303</U_HYP_BofEx400>
<U_HYP_Closed>N</U_HYP_Closed>
</row>
</JDT1>
</BO>
</BOM>

GL Journal Entry & post - control by GL accounts?

Hi all,
There are many users assigned with GL Journal Entry & Post responsibility. Some of them are budgeting staff and some of them are comptrollers.
Questions:
1. Is it possible to restrict a user to enter/post journal entries to only a group of GL accounts?
2. Is a finance comptroller supposed to enter and post journal entries?
Thanks in advance.

Hi
Yes, it is possible through Cross Validation rules or Security Rules. And this is as per your requirement
Regards
Sunil

Re: BPC Journal Entry Posting

Hello Everyone,
Would it be possible to perform a test run before posting journal entries into the BPC system?
Is there any task available in BPC to check debit/credit mismatch or error in the journal entries?
Please let me know.
Kind regards,
RJ

i don't think so that there is any task which does the TEST RUN kind of activity for Journals in BPC.
If no body id posting the values in that account from input schedule then you can easily find out the diference.

Journal Entry

Hi All,
I have to update one field(Header- User defined) in journal entry using DI API for each and every transaction. I know how to update journal entries using DI API but my issue is under which event i will write my update code when system post Journal entries automatically
or
How I will update journal entry which is posted by system using DI API.
I dont want to write update query in Transaction notification Procedure also.
Regards
Firos

Hello Firoz,
The problem:
Documents using integration booking (JE-s) are notified by SP_TRANSACTIONNOTIFICATION, but JE.-s are not recorded there. So you cannot monitor the creation of JE-s.
But, some logic you can find the JE-s booked by Integration
You monitor the et_form_data_Add event on all forms,
- if you are before action, record the journal entry autokey from ONNM (object type 30)
- and when this event executed, you can compare the autokey of journal entries in ONNM table as you have recorded. If the number is difference, you have a background posting happened, so you can call your DI API update procedure.
What i would do in this situation (running logic of the addon)
1. Create an SQL table for storing the updated JE keys
2. Check the OJDT table by time to time (ET_FORM_DATA_ADD event is a good)
3. Update JE headers and record the updated keys in the SQL table created in point 1.
By this method you can populate your field. This solution is also good when an addon is not running on each client.
Regards
János

BPC 10.0 NW: JOURNAL ENTRIES ARE REVERSED WHEN RUNNING CONSOLIDATION

Hi Expert,
After running consolidation, I made various journal entries. After posting the journal entries, status of consolidation and currency translation in consolidation model was changed from "done" to "to be executed". When I re-run the consolidation, the journal entries were reversed.
Please help.
Thanks,
A

Hi A
The fundamental principles of Consolidation Journal entries are when posted, Please keep in mind following rules for any Consolidation system.
Journal Entry Type Local Currency Group Currency ScopeTranslation     Consolidation
Reporting or
Local Currency             LC                    NONE                 NOSCOPE    YES             YES
Group
Currency                        -                        USD                 NOSCOPE     NO              YES
Scope Level
Adjustments                 -                         USD                    SCOPE1        NO            NO
(Top side Adjustments)
==============
I believe that you have had posted Journal entries in Local Currency(LC) and Group Currency with NOSCOPE level. Based on your entry System would perform from above rules.
Hope this will clarify your questions on journal entries why the Monitor has to re-run CT and Consolidation Process.
Thanks
Venkat
*** You Can not Post " LC with SCOPE1(actual ownership scopes)****

Posting Journal Entry in v4.2SP4: Strange Issue. Anyone?

Similar Messages

Maybe you are looking for