Posting records in COPA

Hi,
Can anyone tell me how long it takes to post a COPA record.I have done posting in COPA. And that particular record is not reflected in my extractor when I go to RSA3.So can it be some issue with R3 or does it normally takes time to record the posting.
regards,
Kal

Hi,
I think Safety Delta is 30 minutes for COPA.
Check the Note 0392635 may help you in extraction.
Hope this helps. reward with points if this helps or let us know the issue again.
Regards,
Ashish

Similar Messages

  • Post record trigger

    Hi ,
    I need to use post record trigger, but it is not working in oracle forms 6 , do you have any suggestion ?
    I want to use this trigger to prevent the cursor to go to the next record before commit the previuos one.
    Thanks

    The Post-Record trigger is a valid trigger in Forms 6i.  Can you show us your code in this trigger?
    Craig...

  • PGI delay posting records in LIKP and LIPS

    Hi
    We are facing problem with PGI, When we are process PGI entries with SAP_ALL profile user ID. System process records in Seconds.
    When we are processing PGI entries with all required authorisation for PGI. System takes more time in posting records in LIPS and LIKP as well as Locks material.
    We could not able to find why system behave differently.
    Thanks,
    Yogesh

    Yes I should elaborate a little more. And also add some info.
    There are two entries in CO09 as "total records". One for customer orders and the other for delivery. If you double click in both they do not "unfold" into  the detailed view, as rthe correct "total records do".
    We are using APO, but not for availability check as far as I understand. I do not know how to check this in customiz. but when debugging   PERFORM AVAILABILITY_CHECK_R3 is used inside LATPCU05 source code.
    and inside SAPLATPC / LATPCF0A the  CALL FUNCTION 'AVAILABILITY_CHECK_SERVER' function is called with a dest. that is the R3 name...
    The information displayed in CO09 correspond to a delivery and order that are not pending. I know only because it fits in quantities, not because tehre is any information that tells me so. The delivery was deleted and the order served with another delivery.
    No other order is pending in the system at the moment.
    Some trace of my debugging:
    For what I see, funnction module  CALL FUNCTION 'STOCK_RECEIPT_ISSUE_READ' in SAPLATP0 / LATP0U04 table  S_ATPKXI is felt with the wrong data     
    inside that function module:
      read sales requirements: individual records
              PERFORM vbbe_read.
    and after then this little piece of code:
    SB_READ VBBE.
    (a DEFINE I am not so maliar with..)
    and we get to
    IMPORT P_ATPMX FROM SHARED BUFFER ATPSB(AC) ID P_ATPBI.      in SAPLATP2 / LATP2FMA
    That id contains data that corresopnds to the material. I am not very familiar with this, but I guess it is a sort of buffer normally to avoid extra DB access. If I could just..."delete" that ID....well...just a wild idea.
    I hope that helps you to help me.

  • Accruals Condition Record posted late in COPA along with the Settlement

    Hi Gurus,
    Accruals condition record for 1 item in an Invoice is posted along with the Settlement Credit Note in COPA. While condition records of the other items from the same invoice were posted on the Billing Date itself.
    For eg:
    Invoice 111       Date 01.03.2011
    Items     Condition   value
    1              Z1            100
    2              Z1             200
    3              Z1             300
    COPA Doc No.        Value Field        Date
         001                         200             01.03.2011
         002                         300             01.03.2011
         003                         100             30.05.2011
    30.05.2011 is the date of Rebate Credit Note for the Invoice # 111
    I also got that if Posting of Accrual is not done for an Item, Retroactive rebate settlement automatically posts a new document for accrual.
    So the question is why the posting of accrual was not done on the Invoice date in the first place?
    Edited by: Parth Kulkarni on Jul 1, 2011 4:31 PM

    Hi Suraj,
    i too have the same problem, the condition types for Values and quantity in COPA are assigned. The system updates the quantity for the first billing document but not for the subsequent billing documents.
    Cost of goods sold and revenue gets updated.
    Regards,
    Prateek

  • Post directly into COPA W/O FI update

    Hi All
    Some disounts are posted into FI without  getting posted into COPA in previous periods. Now I want to post those discounts directly into COPA with out updating FI. Is there any transaction to do that?
    Thanks in advance

    Try TOCDE KE21N.
    Enter the characteristics and value fields. Before that select the record type as B.
    It works for me. This populates value only in COPA.
    Regds
    Abu

  • Zrps (copy of vprs) not active in sales order in order to post it to copa

    Hi All,
    Our company is selling products to its other entities (in other parts of the world) who are not in SAP.
    We should be selling to them at 110% of the actual cost.
    I copied VPRS to ZRPS. In the Pricing Procedure, i placed ZRPS on top, followed by ZPRI (it has condition record for 110%), ZNOR (manual condition type, where in if the user wants to enter a price manually, then can enter).
    lf the cost of the material is $30, in the PP, ZRPS is inactive with $30, ZPRI is active with $33, no ZNOR. and the rest below to it looks beautiful with the totals.
    But what's the problem is, in order to get ZRPS into COPA it has to be active, and it is not active in current situation. As ZRPS is mapped into I/C COGS in COPA as this can be seen at the time of billing.
    I want this ZRPS to be active in order to get this solved. I also added VPRS at the bottom. It has a red bomb with $0 value. It did nt work either.
    Hope I am clear.
    Please suggest me on this or any other solution.
    Thanks in advance.
    Regards,
    Vamsi.

    Kindly check at you Item Category in VOV7 whether Determine Cost checkbox is activate or not.
    As before maintaining Condition Type in the Pricing procedure ,it should be activated at Item Category level.
    Best regards,
    Ankur

  • Content repository configuration to store process orders record in COPA

    Dear Experts ,
    i have status ORRQ for my process orders. to save the order records i execute T-code COPA but message comes
    " zero  process order stored ".
    after investigation it was found that we have to maintain content repository  id in OAC3 for process order object type BUS0001.
    OAC0 , OACT  are the t-codes to maintain it in SPRO.
    but the problem i dont know how to do it , neither know which module consultant will be able to do that.DMS or netweaver or
    someone else.
    please guide
    regards
    satish

    not answered

  • Help.....Help......Help....My database is not posting records has got very slow.

    What to do know.
    My database has got very slow.
    Repeatedly I am getting 12571 error in UDUMP
    FATAL ERROR IN TWO-TASK SERVER: error = 12571
    *** 2002.06.29.15.44.23.992
    ksedmp: internal or fatal error
    No current SQL statement being executed.
    ----- Call Stack Trace -----
    No operator is able to post any records.
    What to do, Please Help.
    Sumeet

    What to do know.
    My database has got very slow.
    Repeatedly I am getting 12571 error in UDUMP
    FATAL ERROR IN TWO-TASK SERVER: error = 12571
    *** 2002.06.29.15.44.23.992
    ksedmp: internal or fatal error
    No current SQL statement being executed.---->please notice this line why no any SQL statement is executing
    ----- Call Stack Trace -----
    No operator is able to post any records.
    What to do, Please Help.
    Sumeet

  • Condition Records in COPA

    Hello,
    I want to know the Tcode where we load the condtion records into  condition Types
    in COPA.
    Nettem.

    Hi Srikanth
    I think you mean by derivation rules - It is KEDR.
    Thanks
    Ashok
    Assign points for useful answer

  • POsting Date in COPA

    Hello
    Is it possible to create a COPA report with posting date as a selection criteria? If so, how?

    I think, no need to create new report.
    You can use KE24 ->Edit->Additional Selections. A pop up comes , there select posting date and give the required inputs.
    regards
    S

  • Using Suspense account to post records

    Hi,
    I have a situation which indicates that a file needs to be processed with huge no.of records in SAP.
    As a document limit we know that there is a limitation for processing records i.e ....Alineitem count should be untill 998 then the next set of records needs to be split .
    Could anyone guide me  asper how to split a set of records and then process or rather post the first 998 records in a suspense account and next set of records in another run?
    Thanks
    Kylie
    Edited by: kylietisha on May 26, 2010 3:34 PM

    Too bad - I couldn't find much even though I remember answering such a question years ago.
    OK - summarize:
    You cannot post a financial document with more than 999 items. this is an SAP hard limit. In fact SAP recommends not posting more than 950 items in a document because of automatic entries that may be produced.
    Let's say you have a file with 10,000 items that must be updated. You loop through the entire file and first determine that the sum of debits equals the sum of credits. If not, it's an error and you stop.
    Assuming they are equal, loop through it again in groups of 950 items.keep track of the total considering debits and credits. Create a line item for each of the 950 items and at the end of each 950 group, create an entry in the suspense account for the total of the 950 items. (so if the sum of the 950 items is a credit of $1,000, you create an item with a debit of $1,000 to the suspense account. You will likely not have an even multiple of 950 documents, so at the end, you must take the last group into account.
    If you have done everything correctly, after all the documents have posted, the sum of the suspense account should be 0.
    Rob

  • Duplicate Records in COPA cube

    Dear Friends,
    We have two BW systems with one R/3 as a source system. There are identical COPA cubes in both the BW systems. We had created the COPA cube in the second BW system  recently and did a full load. When i validate the data between the two COPA cubes, i see duplicate records in the second COPA cube. I am wondering why is this so? Is there any setting in the R/3 side that i am missing or anything else? Any ideas?
    Thanks
    Raj

    HI ,
    I am also facing the same problem. In ZCOPA_C01_Q06 i am getting the value double. kindly help with steps as i am new to BI.
    Regards
    Amarendra

  • No Data records for COPA Extractor when using RSA3

    Hi there,
    I created a datasource for COPA (geenerated) and tried to test with Extractor Checker. There is no data records! What's wrong? Any idea? Thanks in advance!
    Weidong

    hi,
    as Ashish wrote check in se16 if there are data for your selection criteria in tables you use in this datasource
    if you use infoset check it in sq02 especially join conditions
    if you use function module - test this module in se37
    Regards,
    Andrzej

  • Direct posting from FI-copa

    Hi Experts
    i have configured  total sales and total cost of our company but the expenses are not reflected can any one please tell how to config Expenses in COPA ???
    Regards
    MuR!!!

    Dear Paolo
    we have live system, we also have cost center accounting active.
    do u know how to active automatic posting in Profit segment through cost center.
    For Example, i post document in FB60, i assign cost center against GL expense account, if i assign profit segment the amount reflects in COPA, but i want when i assign required cost center it automatically active the profit segment ?
    hope you under stand my query!!!
    Regards
    MuR!!!!

  • From stereo on one side to two post recording

    Hi, I recorded last week's sermon using the stereo input rather than the mono so the track has only recorded below the line. Is there any way I can modify to get it to have it output so it will be in both sides of the headphones? I guess I would call it balanced stereo. I hope you can figure out what I am asking. I am learning as I go and don't know the audio lingo.
    Thanks so much,
    Sue

    Thank you I read the info. This is beneficial but doesn't answer my question as to whether it is now possible to convert the left only to mono so that it comes out in both speakers. Any help??

Maybe you are looking for