Power Adapter Does Not Charge the Battery and Charge Light Is On?
Power Adapter Does Not Charge the Battery and Charge Light Is On?
My power adapter doesn't charge my computer anymore. however the charge light is on.
Please help my battery is draining fas
So, with your power adaptor connected not only does the battery not charge but the powerbook is not running on ac power. Then I guess the power adaptor is faulty. In as much as you've verified this with a known good one a new one is in order. Try yours in another powerbook to make sure.
Similar Messages
-
HP DV7-3085dx won't power up, seems the battery and charging is ok.. possible mother board problem?
Hi I recently received an HP DV7-3085dx from a friend of mine since he hadn't been using it for a while.
So, when I tried to turn it on for the first time, the power button wouldn't work, or the lap top itself wouldn't power on.
When I plug in the charger, AC adapter light turns on, and when I connect the battery, both the battery light and the AC light turns on fine.
However, there's no fan, or any light flashing when I press the power button as if it's dead.
I've searched and tried:
1. hard reset - pressing on the power button for a minute without any attachement and so on
2. reseating ram and CMOS battery
3. cleaning heatsink and re-applying thermal compound.
4. tried turning on the laptop without hard drive.
However, none of those would solve the problem.
Could it be the faulty motherboard, fan or heatsink?
Or, does battery light on means the motherboard is safe, at least?
By the way, it seems like the battery charges just fine as after a while on an AC, the battery light turns off(signaling that it's fully charged)Hello coolhair50, welcome to the HP Forums.
I see that you've acquired your Notebook from a friend, that you're trying to get it to turn on and start up. That only the batter and charger appear to be working as the Notebook will not turn on. I will try to assist you with this.
You're on the correct path, the issue does appear to be hardware related from what you've attempted so far. The battery and charger appear to be fine.
What I would suggest starting with is this document: Troubleshooting Black Screen Displays with No Error Messages During Startup or Boot. It will guide you through testing the memory and hard drive. If all of that tests ok, then you're most likely looking at a motherboard issue.
You have a few options at that point. The first would be callling support to see what they could offer. HP Technical Support, North America 1-800-474-6836. For all other regions click here.
The second would depend on your own personal knowledge of Notebooks, but you could use the Maintenance and Service guide to look up possible compatible parts and how to replace them.
Please let me know how everything goes for you.
Thank you for posting on the HP Forums.
I worked on behalf of HP. -
A 305- S6825 will not start with the battery and charger. There's no light, no noise on fan or HDD
PC will not start with the battery and charger. There's no light, no noise on fan, hard drive and CD writer. The hard drive, fan and charger are new. But I was havingproblems and sudden blackouts System 32. Try several times to install theoperating system but the pc turned off suddenly and restarted until I stop working completely. Now it does nothing and no light. I hope it can help me I need torespect and love very much this notebook.
Thanks in advance
Jose Echevarria
[email protected]Turn off your laptop, unplug all wires, remove the battery, and hold the power button for thirty seconds. Afterwards, reattach the battery and connections. If it still won't start, remove the battery and start with just the AC power. Next try without the AC power and just the battery.
- Peter -
My IPad screen is dark and will not turn on. I have charged the battery and no luck. I have tried to restart it multiple times with no luck. During the restart, the screen will flicker like it is trying to restart but the silver apple never shows. Any suggestions?
Please tell me that it has NEVER been jailbroke. If it has never been jailbroke, here are some standard repair procedures:
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, read this. -
My computer (MacBook mid-2007) does not recognise the battery suddenly. A cross appears on the image. I have tried uninstalling and re-installing it but it didn't help. Is the battery dead?
Welcome to the Apple Support Communities
Try resetting the SMC > http://support.apple.com/kb/HT3964
If it doesn't work, take the Mac to an Apple Store to get it diagnosed -
Ibook g4 that does not display the battery meter, sound volume, tim
I have an ibook g4 that does not display the battery meter, sound volume, time & day.When i move cursor over the area where they should be I see a spinning beach ball beach ball
Choose Go to Folder from the Finder's Go menu and enter ~/Library/Preferences/ as the folder's path. Locate the item named com.apple.systemuiserver with or without a plist at the end, and drag it to the desktop.
(10471) -
My new iPod nano does not get the battery life that is advertised
Help me my iPod nano does not get the battery life that is advertised
Which battery life are you referring to? Apple's website states the iPod Nano 6th Gen will get "up to 24 hours of music playback when fully charged". There are going to be a lot of things that can change that. Are you using the stopwatch or the count down timer a lot? Are you using the FM radio a lot? Any accessories that you are using with the iPod? These will all have an effect on your battery life.
-
Problem:
When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.
Any help that you can provide in helping my iPhone accurately sync with iPhoto and iTunes will be greatly appreciated.
Symptoms:
1) Sync: It’s not completing the sync. Below, I’ve provided all of my settings from the iTunes Summary tab so that you might tell me if I’ve selected any incorrect options. I prefer to sync the “old school” way – by connecting to the computer – as opposed to syncing over the cloud. Perhaps this is what’s causing the problem? Here is a list of the steps displayed in the iTunes window as the sync progresses:
waiting for sync to start (step 1 of 7)
backing up (step 2 of 7)
preparing to sync (step 3 of 7)
determining apps to sync (step 4 of 7)
preparing apps to sync (step 5 of 7)
importing photos (step 6 of 7)
waiting for changes to be applied (step 7 of 7)
syncing apps / copying 1 of 4 (App name) (step 7 of 7)
canceling sync
apple icon
2) Photos: I've selected only certain of my iPhoto albums to sync to my iPhone. All of the albums are correct/complete in iPhoto. All of the albums are listed on my iPhone, both before and after the sync, but the albums are empty (no actual photos) before and after the sync. Perhaps this is tied to the fact that the sync isn’t completing, but because “importing photos” is one of the steps that the incomplete sync displays, I don’t know.
3) Apps: When I launch iTunes and click on the Apps folder under the Library listing, then click on the Updates tab, iTunes searches for any Apps needing to be updated and provides a list. If I click on Update All, the Apps are successfully updated in iTunes. But, when I plug in my iPhone so that the updates will transfer to the apps on my iPhone, the updates don’t transfer to the apps on my iPhone and those apps still reflect that they need updating on the iPhone.
Other Potential Pertinent Info:
The flash memory hard drive on my MacBook Air recently died (perhaps a month or two ago). Apple had emailed me about a known issue and literally the next day, my MacBook Air crashed. I installed a new flash memory drive and re-installed everything from a backup off of an external hard drive. Everything seems to be working fine; it recreated accurately all of my software and data, including iPhoto and iTunes, the pictures and songs (respectively) for which are stored on that hard drive, as opposed to being on the flash memory in the MacBook Air itself. However, I don’t recall if the start of the sync problem described herein started happening at the same time that I replaced the flash memory drive. All I know is that the computer is working perfectly in all respects and that even as the sync is failing, it at least says that it’s doing the right things and looking in the right places (e.g., the list of albums on my iPhone matches the list of albums in iTunes, etc.).
Settings/Status:
MacBook Air
OSX v. 10.9
iPhoto ’11 v. 9.5 (902.7)
iPhone iOS 7.0.4
iTunes v. 11.1.3 (8)
Summary Tab
Backups (This Computer)
Options
Automatically sync when this iPhone is connected
Sync only checked songs and videos
Photos Tab
Sync Photos from iPhoto (429 Photos)
Selected albums, Events, and Faces, and automatically include (no Events)
Albums – 9 are selectedYou need to download iTunes on your computer. iOS 6 requires the latest version of iTunes which is 10.7.
-
The application does not use the screen and run in the background
Hi
I have downloaded a package of j2me Midlet
from [link] here [link]
and try to reuse the code
but I get the following error when running the code:-
The application does not use the screen and run in the background
I think the error into one of these two classes
package main;
import javax.microedition.midlet.*;
import javax.microedition.midlet.*;
import javax.microedition.lcdui.*;
import javax.microedition.media.Manager;
import javax.microedition.media.MediaException;
import javax.microedition.media.Player;
import java.io.IOException;
import java.io.InputStream;
public class MainMidlet extends MIDlet implements CommandListener {
private SSGameCanvas gameCanvas ;
private Command exitCommand ;
private Player player = null;
public void startApp() {
try {
// create new game thread
gameCanvas = new SSGameCanvas();
gameCanvas.start(); // start game thread
exitCommand = new Command("Exit",Command.EXIT,1);
gameCanvas.addCommand(exitCommand);
gameCanvas.setCommandListener(this);
Display.getDisplay(this).setCurrent(gameCanvas);
catch (java.io.IOException e)
e.printStackTrace();
try {
// start sounds
InputStream in = getClass().getResourceAsStream("/resource/startfly.wav");
player = Manager.createPlayer(in,"audio/x-wav");
player.setLoopCount(1);
player.start();
catch (MediaException ex)
ex.printStackTrace();
catch (IOException ex)
ex.printStackTrace();
public void pauseApp() {
public void destroyApp(boolean unconditional) {
if (player != null) {
player.close();
System.gc();
public void commandAction(Command command, Displayable displayable) {
if (command == exitCommand)
destroyApp(true);
notifyDestroyed();
package main;
import java.io.IOException;
import javax.microedition.lcdui.*;
import javax.microedition.lcdui.game.*;
public class SSGameCanvas extends GameCanvas implements Runnable {
protected GameManager gameManager;
protected boolean running;
private int tick=0;
private static int WIDTH;
private static int HEIGHT;
private int mDelay = 20;
Form mainForm;
Display display;
//private int MaxTime;
public SSGameCanvas() throws IOException{
super(true);
gameManager = new GameManager(5,5,getHeight()-10,getWidth()-10,this);
public void start() {
this.running = true;
Thread t = new Thread(this);
t.start();
public void stop() {
running = false;
public void render(Graphics g) {
WIDTH = getWidth();
HEIGHT = getHeight();
// Clear the Canvas.
g.setColor(0, 0, 50);
g.fillRect(0,0,WIDTH-1,HEIGHT-1);
// draw border
g.setColor(200,0,0);
g.drawRect(0,0,WIDTH-1,HEIGHT-1);
// draw game canvas
gameManager.paint(g);
public void run() {
while (running) {
// draw graphics
render(getGraphics());
// advance to next graphics
advance(tick++);
// display
flushGraphics();
try { Thread.sleep(mDelay); }
catch (InterruptedException ie) {}
public void advance(int ticks) {
// advance to next game canvas
gameManager.advance(ticks);
this.paint(getGraphics());
}Edited by: VANPERSIE on Jul 10, 2012 12:26 PMHi Andi,
Thanks for your reply.
Yes, I have waited for a while and the result doesn't change.
The Porblem here is the application is seen started in visual administrator.Only restart brings up the page back.
Can you please suggest anything.
Thanks and regards
Nagaraj -
Yesterday I decided to finally update my iphone 4S to the latest operating system 7. It asked me for a password when upgrading but now does not recognize the password and will not let me in. FRUSTRATED. What do i do????
Hi Rachel,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Cheers,
- Judy -
I have an iphone 5s and it is synced to itunes and works fine. previously I have downloaded audiobooks to my wifes 6th gen nano using this account - now I tunes does not recognize the device and also it seems that it is not being read by the computer?
Hey Stan1958,
Thanks for the question. I understand you are experiencing issues with your iPod nano and iTunes. Based on your symptoms, you may find the following resources helpful in resolving this issue:
Windows
iPod appears in Windows but not in iTunes
iPod not recognized in 'My Computer' and in iTunes for Windows
iTunes reports that "iTunes cannot recognize this iPod at this time"
Thanks,
Matt M. -
I have a gen 3 ipod and can't get it into disk mode. In itunes it does not have the option and I cant figure out how to do it on the ipod touch itself. Any ideas?
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities
-
I am having issues with adjusting the duration of time for each still frame and transition in imovie 11. Each time that I adjust these times, the application does not accept the change, and instead automatically enters its own time. Is there a work around this? Or am I doing something wrong? Please Help!
Thank you,
lagrlHave you tried turning off automatic transitions ? Choose file - project properties and follow the dialogue box to change duration with a slider. iMovie also doesn't allow a transition to be more than 50% duration of the clip its attached to. In other words if the clip is 4 seconds the transition cannot be more than 2 seconds and remember that relates to the first clip as the following clip (right side) is pulled back to overlay it.
Does this help. Perhaps you already know this ? -
Hi, we have a G5 Blade server running OS X 10.5.8 with adual Fibre Channel card. The OS does not read the card and cannot establishconnection to the RAID controller.
I have tried to move the card to another port with no luck.Ran all the updated software possible. Please can someone adviceHi,
Was the card previously working in that machine? If it was and you have a G5 tower you could try the card in there. Here is a list of Apple fibre cards and cables which show what's compatible with what. http://support.apple.com/kb/HT1769
The card should appear in the System Profiler under Fibre Channel and PCI Cards.
All the best
Beatle -
i got my new iphone 4s , can not download the OS 5 it says error 9006 on my windows 7. also the phone does not show the capacity and serial number details on the itunes summery ?? please help
Hi Kevin,
The iPhone 4S comes automatically loaded with iOS 5, and any updates after iOS 5.0 can be completed directly from on the phone in Settings > General > Software Update. If you are having trouble using iTunes to update software, I suggest you reset iTunes so that you can pair your phone to the computer again, because if you can't see the serial number and capacity, that generally means your phone isn't paired. For any problems this doesn't fix, please contact Apple directly through their automated help line, 1(800)MYAPPLE.
Maybe you are looking for
-
After upgrading to firefox 4 im now having a lot of problems using the browser. if i try an open a link in a new tab it will just open up a blank tab, if i click on links or even type in the google search bar at the top it doesnt do anything, it just
-
Scehdule Line Date getting change to future date once the Sales Order is saved
Hello Experts, Good Morning to you all, This is with respect to the Issue we are facing for the Orders having Product Allocation on multiple materials. Please find enclosed the detials below. Issue : Scehdule Line Date getting change to future date o
-
How do I get the top links in the search results page to display the folder?
In the search results page, if you click on the top link from each result, it only brings up the description. Not much use as a link, so was wondering how you display the folder from this link.
-
Will 10.4.4 Slow Down the Computer?
Hi there, When 10.4.3 came out, I heard that it had sped up the fan speed on some or all G5s. I figured that this must be because 10.4.3 was making the G5s work harder. So when I put 10.4.3 into my G4 I was a little unsure if it would be a good idea.
-
Does anyone know why there is ALWAYS an empty jazn-data.xml file deployed with my application even though I don't have one defined in my project? Also, how can I stop this? I want my application to use the jazn-data.xml file already configured for th