Power mac become stupidly slow after update from 10.4.7 to 10.4.8

Hey people. My Power mac takes on average 3mins 30 to start up after i updated from 10.4.7 to 10.4.8 . Before it took on average about 50secs to start up and get a application running. Are any of you experiencing this problem. I have only used 50gigs of space. I have done system recoverys and this still happens

i have checked. it will have the have the white screen where you see the apple logo and the loading cursor. That lasts about 40secs. Then it will it will show the loading bar. Thats lasts about 30secs. then it will show my desktop background image. It takes about 40secs to load my desktop items. then it will take about a min after that to show my username,time,Country flag,Volume control and my wireless icon in the top right hand corner. I have done 4 system restores, my recovery disks start at 10.4.4 it will work fine all the way up until 10.4.8. Is there a major bug in the upgrade or what?

Similar Messages

My mac become more slower after update to Mountainlion

My mac become more slower after update to Mountainlion
What shoudl I do? can you guys help me? BTW I have update my RAM to 8G
Thank you

What is your Mac?
What did you update from? 10.6 or 10.7?
If from 10.6 or your machine was at 10.5 at one time, it might be too old/slow for 10.8, you might want to revert to 10.6 again.
How to revert your Mac to Snow Leopard
What do you notice is slower than before? Like Internet or booting or loading programs or UI feel or what exactly?
If it's the Internet, then check this out
WiFi, Internet problems, possible solutions
WiFi security issues, at home and WiFi hotspots
Now a fresh install of OS X usually does wonders, this would mean you will need to take acurate account of your installed programs, passwords, export bookmarks and backup all your data to a external storage drive. Keep the boot drive data below 50% filled ideally, (not much for you apprantly, just reduce 50GB of data)
Most commonly used backup methods
Write down your AppleID and password to reinstall 10.8
When your sure, then hold command r boot into Recovery, use Disk Utility to Erase (middle selection) the Macintosh HD partition and wait, it's going to map off fialing sectors. When done quit and reinstall 10.8 fresh and install programs and files from backup into the same named accounts.
https://support.apple.com/kb/HT4718
That should make things zippy again. Also a #12 OnyX cache cleaning routine
Step by Step to fix your Mac
Another method is this, it's a defragging/performance speed up step, you won't have to reset everything up again from scracth like a fresh install method does. But it requires paid software and a external drive, but makes a excellent bootable backup in the process that can save your behind one day.
How to properly defrag a Mac's hard drive

Mac got really slow after updation of os X and some application misbehaving and not able to open them.

Mac got really slow after updation of os X and some application misbehaving and not able to open them.

Apply the combo update
http://support.apple.com/kb/DL1640

Why is my mac a lot slower after updating to 9.2. ?

Hi! My Mac is so much slower after updating it to 9.2., I installed Java but I read at some forums I should delete it, but I dont know how. Can somebody help me?
My system review in Etrecheck is:
Hardware Information:
          MacBook Pro (13-inch, Early 2011)
          MacBook Pro - model: MacBookPro8,1
          1 2.3 GHz Intel Core i5 CPU: 2 cores
          4 GB RAM
Video Information:
          Intel HD Graphics 3000 - VRAM: 384 MB
System Software:
          OS X 10.9.2 (13C64) - Uptime: 6 days 11:48:20
Disk Information:
          TOSHIBA MK3265GSXF disk0 : (320,07 GB)
                    EFI (disk0s1) <not mounted>: 209,7 MB
                    Macintosh HD (disk0s2) / [Startup]: 319,21 GB (50,46 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          HL-DT-ST DVDRW GS31N
USB Information:
          Apple Inc. BRCM2070 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Inc. FaceTime HD Camera (Built-in)
          Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Kernel Extensions:
          com.logmein.driver.LogMeInSoundDriver          (1.0.3 - SDK 10.5)
Launch Daemons:
          [System] com.google.keystone.daemon.plist 3rd-Party support link
          [System] com.logmein.logmeinblanker.plist 3rd-Party support link
          [System] com.logmein.logmeinserver.plist 3rd-Party support link
          [System] com.logmein.raupdate.plist 3rd-Party support link
          [System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
          [System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
          [System] org.macosforge.xquartz.privileged_startx.plist 3rd-Party support link
Launch Agents:
          [System] com.divx.dms.agent.plist 3rd-Party support link
          [System] com.divx.update.agent.plist 3rd-Party support link
          [System] com.google.keystone.agent.plist 3rd-Party support link
          [System] com.logmein.logmeingui.plist 3rd-Party support link
          [System] com.logmein.logmeinguiagent.plist 3rd-Party support link
          [System] com.logmein.logmeinguiagentatlogin.plist 3rd-Party support link
          [System] com.oracle.java.Java-Updater.plist 3rd-Party support link
          [System] org.macosforge.xquartz.startx.plist 3rd-Party support link
User Launch Agents:
          [not loaded] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
          [not loaded] com.facebook.videochat.[redacted].plist 3rd-Party support link
          [not loaded] com.facebook.videochat.[redacted].plist 3rd-Party support link
          [not loaded] com.google.GoogleContactSyncAgent.plist 3rd-Party support link
          [not loaded] com.google.keystone.agent.plist 3rd-Party support link
          [not loaded] com.spotify.webhelper.plist 3rd-Party support link
User Login Items:
          iTunesHelper
          Spotify
Internet Plug-ins:
          o1dbrowserplugin: Version: 5.2.4.18058 3rd-Party support link
          OVSHelper: Version: 1.1 3rd-Party support link
          Default Browser: Version: 537 - SDK 10.9
          Google Earth Web Plug-in: Version: 7.1 3rd-Party support link
          Unity Web Player: Version: UnityPlayer version 3.4.2f3 - SDK 10.5 3rd-Party support link
          Silverlight: Version: 5.0.61118.0 - SDK 10.6 3rd-Party support link
          LogMeIn: Version: 1.0.935 - SDK 10.7 3rd-Party support link
          DivX Web Player: Version: 3.1.1.9 - SDK 10.6 3rd-Party support link
          QuickTime Plugin: Version: 7.7.3
          LogMeInSafari32: Version: 1.0.935 - SDK 10.7 3rd-Party support link
          googletalkbrowserplugin: Version: 5.2.4.18058 3rd-Party support link
          SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 3rd-Party support link
          iPhotoPhotocast: Version: 7.0 - SDK 10.7
          JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
Safari Extensions:
          Slick Savings: Version: 1.0
          Amazon Shopping Assistant: Version: 1.1
          Searchme: Version: 1.2
          Ebay Shopping Assistant: Version: 1.1
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 2.0 - SDK 10.9
          AppleAVBAudio: Version: 203.2 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
          PSPlugin: Version: (null) 3rd-Party support link
3rd Party Preference Panes:
          Java 3rd-Party support link
Old Applications:
          /Library/Application Support/Microsoft/MERP2.0
                    Microsoft Error Reporting:          Version: 2.2.9 - SDK 10.4 3rd-Party support link
                    Microsoft Ship Asserts:          Version: 1.1.4 - SDK 10.4 3rd-Party support link
          Solver:          Version: 1.0 - SDK 10.5 3rd-Party support link
                    /Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
          /Library/Application Support/DivX
                    DivXUpdate:          Version: 1.0 - SDK 10.5 3rd-Party support link
                    DivXMediaServer:          Version: 10.1 - SDK 10.5 3rd-Party support link
                    DivXTransferWizard:          Version: 10.1.1 (Build 10.1.1.44) - SDK 10.5 3rd-Party support link
                    DMSLaunch:          Version: 1.0 - SDK 10.5 3rd-Party support link
          SLLauncher:          Version: 1.0 - SDK 10.5 3rd-Party support link
                    /Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
          /Applications/Microsoft Office 2011/Office
                    Microsoft Graph:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Database Utility:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Office Reminders:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Upload Center:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    My Day:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    SyncServicesAgent:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Open XML for Excel:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Alerts Daemon:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Database Daemon:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Chart Converter:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Clip Gallery:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
          /Applications/Microsoft Office 2011
                    Microsoft Communicator:          Version: 13.1.2 - SDK 10.5 3rd-Party support link
                    Microsoft PowerPoint:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Excel:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Outlook:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Word:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Document Connection:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
          Microsoft Language Register:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    /Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
          iSkysoft Helper Compact:          Version: 2.2.6.4 - SDK 10.5 3rd-Party support link
                    /Users/[redacted]/Library/Application Support/Helper/iSkysoft Helper Compact.app
          Microsoft AutoUpdate:          Version: 2.3.6 - SDK 10.4 3rd-Party support link
                    /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
          Microsoft Communicator:          Version: 13.1.3 - SDK 10.5 3rd-Party support link
          DivX Converter:          Version: 10.1.1 (Build 10.1.1.67) - SDK 10.5 3rd-Party support link
          DivX Player:          Version: 10.1.1 (Build 11.3.1.8) - SDK 10.5 3rd-Party support link
Time Machine:
          Time Machine not configured!
Top Processes by CPU:
              15%          fsck_hfs
               7%          Disk Utility
               7%          WindowServer
               2%          diskmanagementd
               2%          EtreCheck
Top Processes by Memory:
          217 MB          com.apple.MediaLibraryService
          172 MB          iTunes
          156 MB          fsck_hfs
          106 MB          Google Chrome
          98 MB          mds_stores
Virtual Memory Information:
          13 MB          Free RAM
          1.01 GB          Active RAM
          1.01 GB          Inactive RAM
          1015 MB          Wired RAM
          21.27 GB          Page-ins
          435 MB          Page-outs

You are using all your 4GB of RAM
Virtual Memory Information:
          13 MB          Free RAM
          1.01 GB          Active RAM
          1.01 GB          Inactive RAM
          1015 MB          Wired RAM
          21.27 GB          Page-ins <---------
          435 MB          Page-outs
When you run out of real RAM you start writing to free hard disk space. This is paging in/out. This is much slower than using real RAM
Add more RAM Basics
Open System Profiler > Hardware
Copy the Serial number and model identifier
Under Memory in System Profiler, you'll see how many slots and what is installed. You need matching pairs. Most likely you will have to replace RAM you have installed unless you have 4 slots and are only using 2 slots.
Go to this page:   http://support.apple.com/specs/
Copy the Serial number in the "Search Tech Specs" search box. This will take you to the info on your computer.
Next using the Identifier and with the knowledge of your exact model and how much RAM you can install, go to this site: (There are several sources for memory. This one has good prices and has the video showing how to install)
http://eshop.macsales.com/shop/memory/
You can find install videos here: http://eshop.macsales.com/installvideos/
Hope this helps!

Photoshop cc 2014 slow after update from mac os 10.9 to 10.10.2

hello
i have update from 10.9 to 10.10.2 i am using a mac pro 2012 2.4 ghz 6 cores 48GB ram and a NVIDIA Quadro K5000 3583 MB
since i update photoshop is extremely slow
any function takes much longer to render , and i am now trying to reverte to the back up runing 10.9.5 again but before that would liek to know if someone can please help me
towards any advice how to try to speed up photoshop been cc or cc2014
thanks
luis
Reply

Kitcateleven please see Error U44M1I210 | Install updates for information on how to resolve the U44M1I210 error.

Mac is much slower after update

why does it take 3-5 minutes longer to start up my mac after I updated from 10.6.4 to 10.6.6? I noticed that it got slower after I first installed 10.6.5... but its really weird!

the hard drive was failing

Can't pause flash with right mouse click on mac osx 10.6 after update from firefox 3 to 6

After updating my firefox 3... to firefox 6 I can no longer right click in a flash video and pause it

My camera is a 1Ds mk II..
and for that one it says
All versions tested. All versions tested. Supported only through Lightroom 4.1.
however, it also says
Windows XP, Vista, 7; Mac OS X 10.5 or 10.6
which is plain wrong, because Canon never supported any drivers for Windows Vista or Win 7, not to speak of XP 64bit. (You cannot connect the camera via firewire, without the device drivers!)

Mac OSX very Slow after update iLife

Dear all;
I just faced problem with my Mac OSX 10.8.4 after upgrade the iLife, the OS freeze then logout from the system
any ideas how to solve this problem?
Regards;

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output andWi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Power Mac G5 Kernel Panics After Waking From Sleep

My G5 has been kernel panicking intermittently the last few weeks. I brought it in to the Apple Store and they ran Apple System Diagnostics (ASD) on it, but found no errors. However, they were able to get it to kernel panic after running it on a full processor load for a couple hours.
After getting the machine back, it has been pretty stable, but it will kernel panic within a minute of waking it up from sleep. Therefore, I can't put the machine to sleep anymore. Once in awhile, it also kernel panics during the boot process.
A few times, including today, the memory also shows up incorrectly in the System Profiler. Right now, my G5 says only 3 GB of RAM are installed when there are actually 4 GB. The Profiler shows six 512 MB chips when there are actually four 512 MB chips and two 1 GB chips in the machine.
Does anyone have an idea of what might be causing this and how I might be able to fix it?
Thanks.

Thanks for the suggestion. I disconnected the MyBook drive from the Firewire 800 port, then put the G5 to sleep again. When I woke it from sleep, it ran almost five minutes, then kernel panicked.
So I did a test with half the RAM and had the same problem. Then I tested the other half of the RAM and the same kernel panics happened. I tried different DIMM slots and it kernel panicked no matter what I tried. The last few times, it just froze without displaying the kernel panic screen.
The kernel panics started happening when I installed the August security update. So I decided to install Leopard on a secondary internal drive. The installation went smoothly and I ran some programs for a new minutes with no external drive attached. Then I put the computer to sleep. When I woke it up about an hour later, the cursor was gone and the screen was frozen.
So I am pretty confused. The computer runs fine as long as I don't put it to sleep. But if I wake it up from sleep, it is a ticking time bomb before it crashes. Is there anything else I can try?

After pressing 'shift' , mac become really slow!

I realy got crazy on my mac....
last year i found that my mac's "shift" key was kept being pressed
so i sent it to Apple,and they fixed it
but after about 2 days of normal status,my mac become incredible slow.....
I cant even do my typing normally...
but this time i let a friend of mine to fix it, and he removed the ox system i had,repalced with XP
the XP runs great
but i didn't do much things in XP,cos i don't like it
so i turn my mac into OS system again
then my mac runs normal
but the whole things turned into a tragedy angain after i pressed "shift"
mac become really slow ,and makes out big noise!!! I couldn't bear it , it's now the worst machine i have
is anyone figure out the real problem with my mac?
does it still a hardware mistake with my "shift key" ? i would be really appreciate if u can solve my problem!!

You should update to the latest version of Snow Leopard (it is now at version 10.6.8) and see if this helps. This will also install a number of security updates to help protect you from potential viruses.
The few other things I can suggest to try are:
1) checking the hard disk by running "Verify Disk" in the Disk Utility program (see the Apple KB article at http://support.apple.com/kb/HT1782 for instructions)
2) check and repair file access privileges (see Apple kb article http://support.apple.com/kb/HT1452)
3) make sure the Startup Disk System Preference shows the Macbook Air's hard disk is selected.
Sorry I have no experience with Chinese input on the mac, however I did find this website http://www.yale.edu/chinesemac that may further help. Good luck!
Rob

First off, i think it's sad that i have to use my non apple device to post this question... Why has my iPad become absolutely useless after updating to iOS 8.1? I am unable to use my mini because it crashes, slow performance, major battery drain.

First off, i think it's sad that i have to use my non apple device to post this question... Why has my iPad become absolutely useless after updating to iOS 8.1? I am unable to use my mini because it crashes, slow performance, major battery drain.

Restore iPad to Factory Default; do not restore from backup. It may be the cause of the problem.
Settings>General>Reset>Erase all content and settings

After change to Mavericks my Mac become too slow e I can't use it because stays asking passwords for "talagent" and "messages agent" as icloud keys. I got changed the icloud password many times and still doesn't work. I can't open any program.

After change to Mavericks my Mac become too slow e I can't use it because stays asking passwords for "talagent" and "messages agent" as icloud keys. I got changed the icloud password many times and still doesn't work. I can't open any program.

Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.

Why my Mac Pro 2009 became too slow after updated Yosemite?

Why my Mac Pro 2009 became too slow after updated Yosemite?

When the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Mac mini 2010 very slow after update to Mavericks

My mac mini 2010 (2.4 Ghz, 8GB ram) is running really very slow after updating to Mavericks.
Clearly OneDrive is a pain... but had it running on ML as well, and though it is a memory and CPU hog, it never really slowed down the system.
This is what Etresoft says:
EtreCheck version: 1.9.15 (52)
Report generated 21 Aug 2014 19:39:34 GMT+2
Hardware Information: ?
Mac mini (Mid 2010) (Verified)
Mac mini - model: Macmini4,1
1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
8 GB RAM
Video Information: ?
NVIDIA GeForce 320M - VRAM: 256 MB
32LG3000 1360 x 768 @ 59 Hz
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 1 day 0:0:8
Disk Information: ?
TOSHIBA MK3255GSXF disk0 : (320,07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209,7 MB
Macintosh HD (disk0s2) / [Startup]: 319,21 GB (104,99 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-STDVDRW GA32N
USB Information: ?
Western Digital Ext HDD 1021 1,5 TB
S.M.A.R.T. Status: Verified
BigOne (disk1s1) /Volumes/BigOne: 1,5 TB (16,45 GB free)
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Logitech USB Receiver
Logitech USB Receiver
Gatekeeper: ?
Mac App Store and identified developers
Kernel Extensions: ?
[loaded] com.Cycling74.driver.Soundflower (1.6.2 - SDK 10.6) Support
[not loaded] com.iospirit.driver.RBTSRPlugin (1.18 - SDK 10.6) Support
[loaded] com.iospirit.driver.rbiokithelper (1.18.1 - SDK 10.6) Support
Problem System Launch Daemons: ?
[failed] com.apple.softwareupdated.plist
[failed] com.apple.wdhelper.plist
Launch Daemons: ?
[loaded] com.iospirit.candelair.daemon.plist Support
[loaded] com.iospirit.candelair.sync.plist Support
Launch Agents: ?
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
User Launch Agents: ?
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
[loaded] com.google.keystone.agent.plist Support
[running] com.plexapp.helper.plist Support
[running] com.spotify.webhelper.plist Support
User Login Items: ?
iTunesHelper
Preview
ElementsAutoAnalyzer
Google Chrome
SEC Helper
Internet Plug-ins: ?
Silverlight: Version: 5.1.20513.0 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 537 - SDK 10.9
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
Candelair Support
Perian Support
Time Machine: ?
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 297.29 GB Disk used: 199.51 GB
Destinations:
BigOne [Local] (Last used)
Total size: 1 TB
Total number of backups: 84
Oldest backup: 2013-07-17 22:07:43 +0000
Last backup: 2014-08-21 17:31:13 +0000
Size of backup disk: Excellent
Backup size 1 TB > (Disk size 297.29 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU: ?
      78% OneDrive
      3% ScreensharingAgent
      3% WindowServer
      0% Google Chrome
      0% fontd
Top Processes by Memory: ?
1.18 GB OneDrive
90 MB Google Chrome
82 MB Finder
57 MB mds_stores
51 MB Google Chrome Helper
Virtual Memory Information: ?
4.46 GB Free RAM
1.94 GB Active RAM
321 MB Inactive RAM
908 MB Wired RAM
3.02 GB Page-ins
506 MB Page-outs

Chances are you have applications that are out of date and need to be updated. Another possibility is Spotlight is indexing and you to wait until it has finished.

HT2848 hi my mac ppc g5 very slow after update mac os x 10.5.8

hi my mac ppc g5 very slow after update mac os x 10.5.8

See if you can hop over to the PowerMac forums.

Power mac become stupidly slow after update from 10.4.7 to 10.4.8

Similar Messages

Maybe you are looking for