PowerBI Analysis Services Connector Error 403

Hi all,
I have a problem with the configuration of PowerBI Analysis Services Connector. I fill all fileds but i have an error in the last step.
Error description: "The remote server forward an error: Forbidden (403)"
I don't understand this error because:
- SSAS acces are granted for my domain\user
- Office 365 account is the same user
- SSAS tabular model is granted for this same domain\user
Who can help me ?
Thanks

Brian-
One other common issue I've seen is the UPN not quite matching. Log onto the SSAS server as the user who's logged into Power BI. Then open a command prompt and run:
whoami /upn
Hopefully the UPN it says will match your EffectiveUserName test and will match exactly how you're signing into the Power BI site.
If that doesn't work, your best bet is to go to
http://support.powerbi.com/ and click Contact Support and describe this situation and someone from the Power BI support team should get in touch with you to troubleshoot.
http://artisconsulting.com/Blogs/GregGalloway

Similar Messages

  • Power BI analysis services connector - the remote server returned an error (403)

    Hi all, does any one have any suggestions what to try to identify the configuration problem I have?
    I have, a SSAS 2012 tabular instance with SP2, there is a database on the instance with a read role with everyone assigned permissions. 
    When configuring the Power BI analysis services connector, at the point where you enter Friendly Name, Description and Friendly error message, when you click next I receive the error "The remote server returned an error (403)." 
    I've tested connecting to the database from Excel on a desktop and connect fine.
    I don't use a "onmicrosoft" account so don't have that problem to deal with.
    We use Power BI Pro with our Office 365. As far as I can tell that part is working ok as I pass that stage of the configuration with a message saying connected to Power BI.
    The connector is installed on the same server as tabular services, its a Win2012 Standard server. The tabular instance is running a domain account that is the admin account for the instance (this is a dev environment) that account is what I've used in the
    connector configuration. It's also a local admin account. There is no gateway installed on the server.
    Any help would be greatly appreciated, thanks, Brian
    Brian Searle

    Brian-
    One other common issue I've seen is the UPN not quite matching. Log onto the SSAS server as the user who's logged into Power BI. Then open a command prompt and run:
    whoami /upn
    Hopefully the UPN it says will match your EffectiveUserName test and will match exactly how you're signing into the Power BI site.
    If that doesn't work, your best bet is to go to
    http://support.powerbi.com/ and click Contact Support and describe this situation and someone from the Power BI support team should get in touch with you to troubleshoot.
    http://artisconsulting.com/Blogs/GregGalloway

  • Connection issue for Power BI Analysis Services Connector

    Hi,
    I have a problem with the connection to power bi.
    the analysis services connector was installed correctly and I see in my account of power bi the tabular server, but, when wanting to deploy
    database it marks me the following error: IMDExternalConnection
    the user that I set as administrator has permissions on the server tabular connector.
    An example :
    register my account with this email from my work : [email protected], and the domain user is [email protected]
    could you guide me to know why this mistake is happening?
    what credentials does power bi use to access my tabular server ?
    Greetings!

    Hi,
    Can you please share a screenshot of the error message? Is it during the installation/configuration of the connector?
    If yes, I suspect it is due to invalid credentials. You need to use your windows account of the Analysis Services server admin.
    If the error is during connecting to AS server from Power BI, most likely it is due to a effective user name mismatch. The 6th FAQ listed in this blog post talks about the IMDExternal connection error -
    http://blogs.msdn.com/b/powerbi/archive/2015/03/11/power-bi-analysis-services-connector-deep-dive.aspx#faq
    Please check it out & let us know if your issue is resolved.
    Thanks,
    Mini

  • Can't connect to BI Analysis Services Connector

    Hi all,
    I had tried to connect with BI Analysis Services Connector. I had done all steps, but when I tried to connect with BI Analysis Services Connector, can't view cubes and appear a error message. This don't have specifications.
    Technical details:
    Activity Id: 3629f200-123e-e7b5-7a6b-6676f47608ef
    Request Id: fdfa02e2-4500-3c74-47c5-573a5a97bb9b
    Date: 2015-03-27 20:44:01Z (UTC)
    I don't undertand what is the error.
    Please Help me
    Thanks!

    Thanks for your reply.
    The error I got in the OC4J window is : WARNING java.net.ConnectException: Connection refused: connect
    However, I have now been able to login to BI Publisher as Administrator. What I did was uninstall the full OBIEE (Basic) installation, and instead installed the BI Publisher component only, (along with OC4J).
    Works fine now, although I don't know why it didn't work with the full install. Any ideas?
    Cheers,
    Stephen

  • Will the Power BI Analysis Services Connector work if AD and AAD UPN suffixes don't match?

    We are using Azure Active Directory, AD FS, and DirSync with
    Alternate Login IDs, which means that our on-prem usernames have a different UPN suffix from our AAD usernames.
    Will the Power BI Analysis Services Connector work in this setup? Or do the AD and AAD UPN suffixes absolutely have to match?

    Hey Adam,
    From SSAS, we simply query AD by passing the UPN we receive from AAD. As long as AD can find a match, it'll work.
    So if there is a way in AD to map a particular UPN to another value, it'll work.
    For example: For a user A, her on premises UPN is
    '[email protected]' but she uses '[email protected]' as her email address. From AAD we'll receive
    '[email protected]' & since AD knows that this is same as
    '[email protected]' effective user name will work.
    Hope this clarifies! let me know if you have more questions.
    -mini

  • What's my password....Power BI Analysis Services Connector Deep Dive

    Here are three screen shots:
    SSMS:
    PowerBI connected:
    What's my password?

    Hi Greg,
    According to your description, you want to know the what you need to put when logging on to SSAS. Right?
    In Analysis Services, Analysis Services provides a role-based authorization model that grants access to operations, objects, and data. All users who access an Analysis Services instance or database must do so within the context of a role. And the membership
    of roles should be assigned to windows use (windows authentication). 
    In this scenario, you need to put in the windows user password. It's not supported to connect via SSAS without password. 
    Reference:
    Roles and Permissions (Analysis Services)
    If you have any question, please feel free to ask.
    Best Regsards,
    Simon Hou
    TechNet Community Support

  • Bad Request error on Analysis Services Connector

    I'am trying to connect my PowerBI preview account to a tabular instance on a Azure Virtual Machine and always fail at the end with this error:
    The remote server returned an error: (400) Bad Request. [UTC TIMESTAMP: 2/19/2015 12:20:49 PM] [REQUESTID: 72fc77f8-05c1-4293-b3d3-89d42cbbb8d7]
    It also fail in my PowerBI account:
    Rui Romano

    Hi Rui,
    Sorry for the delay in getting back to you on this. If you're still hitting the issue, please use the "Contact Support" option at the top-right of the website. This will send the full error details directly to our Engineering team who will follow
    up with you.
    Regards,
    M.

  • PeopleSoft Web Services Connector Error – Failed to create a 'RequestMessageMemberType' . . .

    Hello all,
    I am new to FIM and am currently in the process of setting-up a PeopleSoft
    Web Services MA.  I am receiving the following error in the FIM Sync Manager in the Create Management Agent dialog in the Global Parameters section:
    “Test Connection failed with the following error: Failed
    to create a ‘RequestMessageMemberType’ from the text d:Find__CompIntfc__CI_PERSONAL_DATATypeShape’. Below is the information about configured endpoint address(es): http://<FQDN>:10320/PSIGW/PeopleSoftServiceListeningConnector/HR92DEV”.
    I had no issues with the discovery process in the Web Services Configuration tool.  The following parameters were supplied for the config file:
    WSDL: 
    http://<FQDN>:10320/PSIGW/PeopleSoftServiceListeningConnector/HR92DEV/PSCONNECTORWEBSERVICE.1.wsdl
    Namespace: 
    targetNamespace
    Basic authentication <user>, <password>; Interoperable:
    PasswordText
    Has anyone else received this error message or can anyone give me some advice on how to troubleshoot?  Any help would be greatly appreciated.
    Thanks.

    Hello all,
    I am new to FIM and am currently in the process of setting-up a PeopleSoft
    Web Services MA.  I am receiving the following error in the FIM Sync Manager in the Create Management Agent dialog in the Global Parameters section:
    “Test Connection failed with the following error: Failed
    to create a ‘RequestMessageMemberType’ from the text d:Find__CompIntfc__CI_PERSONAL_DATATypeShape’. Below is the information about configured endpoint address(es): http://<FQDN>:10320/PSIGW/PeopleSoftServiceListeningConnector/HR92DEV”.
    I had no issues with the discovery process in the Web Services Configuration tool.  The following parameters were supplied for the config file:
    WSDL: 
    http://<FQDN>:10320/PSIGW/PeopleSoftServiceListeningConnector/HR92DEV/PSCONNECTORWEBSERVICE.1.wsdl
    Namespace: 
    targetNamespace
    Basic authentication <user>, <password>; Interoperable:
    PasswordText
    Has anyone else received this error message or can anyone give me some advice on how to troubleshoot?  Any help would be greatly appreciated.
    Thanks.

  • Permanently change default error configuration in Analysis Services 2005

    Hi,
    Currently, I am working on a BPC 5.1 application.  The data for this application is loaded(inserted via SQL statement) right to the FACT table and then a full process is run for that cube via an SSIS package using the Analysis Services Processing Task.  Often records are loaded this way where a dimension member for some of the records has not been added to the Account dimension yet.  These records after loading are considered 'orphan records' until the accounts are added to the account dimension.
    This loading process is used because of the volume of records loaded(over 2 million at a time) and the timing of the company's business process.  They will receive data sometimes weeks before the account dimension is updated in BPC with the new dimension members.
    If I try and process the application from the BPC Administration area with these orphan records in the FACT table, the processing stops and an error displays.  Then when I process the cube from Analysis services, an error is displayed telling me that orphan data was found.
    A temporary work-around is to go into the cube properties in Analysis Services 2005, click on Error Configuration, uncheck 'Use default error configuration' and select 'Ignore errors'. Then you can process the application from BPC's Administration page successfully.  But, the problem is that after processing the application successfully, the Analysis Services Error Configuration automatically switches back from 'Ignore errors' to 'Use default error configuration'.
    Does anyone have any suggestions on how to permanently keep the 'Ignore errors' configuration selected so it does not automatically switch back to 'Use default error configuration'?  Prior to BPC 5.0 this was not occurring.
    Also, does anyone know why this was changed in BPC 5.0/5.1?
    Thanks,
    Glenn

    Hi Glenn,
    I understood the problem but I can say that it was a bad migration of appset from 4.2 to 5.0.
    Any way they are using a dts package to import data into our fact table. That's means they have to add another step into that package where they have to do the verfications of records before to insert into fact table. Verfications can be done using the same mechanism from our standard import. Just edit that package and add similar steps into customer package.
    Attention you need somebody with experience developing DTS packages with for BPC to avoid other problems.
    One of big benefits from 5.X compare with 4.2 was the fact that we are able to use optimization schema and aggregations for cubes.
    Heaving that orphan records it is not possible to use optimization schema for cubes and you are not able to create good aggregation into your cube.
    So my idea is to provide all these information to customer and to try to modify that package instead to enable that option which can cause many other issues.
    Sorin

  • Can't connect to analysis services

    Hi,
    After looking through the forum, I haven't seen the problem I encounter.
    I am able to connect to the Database Engine, Integration services, Reporting Services but I can't connect to Analysis Services from SQL Server Management Studio although the service is running.
    I am using SQL Server 2012.
    I have the following error :
    Internal error: An unexpected error occurred (file 'pfshcollation.cpp', line 323, function 'PFCollation::Init'). (Microsoft SQL Server 2012 Analysis Services)
    The progam location is:
       at Microsoft.AnalysisServices.AdomdClient.AdomdConnection.XmlaClientProvider.Connect(Boolean toIXMLA)
       at Microsoft.AnalysisServices.AdomdClient.AdomdConnection.XmlaClientProvider.Microsoft.AnalysisServices.AdomdClient.AdomdConnection.IXmlaClientProviderEx.ConnectXmla()
       at Microsoft.AnalysisServices.AdomdClient.AdomdConnection.ConnectToXMLA(Boolean createSession, Boolean isHTTP)
       at Microsoft.AnalysisServices.AdomdClient.AdomdConnection.Open()
       at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
       at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
    What can I do to connect?

    Hi Thush,
    According to your description, you get the above error when connecting SSAS in SSMS. Right?
    In Analysis Services, this error turns out to be a the data provider issue. I suggest you re-install the OLE DB Provider for SQL Server 2012.
    On the Installation page, choose New SQL Server stand-alone installation or add features to an existing installation.
    On the Installation Type page, choose Perform a new installation of SQL Server 2012.
    On the Setup Role page, choose SQL Server Feature Installation.
    On the Feature Selection page, click Client Tools Connectivity. This option installs
    Microsoft.AnalysisServices.Xmla.dll
    Do not select any other features.
    Click Next to finish the wizard, and then click Install to run Setup.
    Reference:
    Microsoft® SQL Server® 2012 SP1 Feature Pack
    If you have any question, please feel free to ask.
    Regards,
    Simon Hou
    TechNet Community Support

  • The schedule in Power BI report refresh error with the powerpivot or powerview with SQL Analysis services as data source

    In the Power BI Admin Centre, the data sources that cannot be setup with Analysis services, and it has the error to schedule the powerpivot or powerview report to have data refresh. The error is "我們無法重新整理此報表中的資料來源種類。" - english, "We
    can not rearrange the source of information in this report types ." We would like to know the power bi schedule function can support SQL analysis service or not. Please advise. Thanks.
    Winsee

    It is not currently supported. You might be able to create a linked server in SQL to be a proxy for the connection and enable scheduled refresh if you are desperate.
    https://support.office.com/en-US/Article/Supported-data-sources-cb69a30a-2225-451f-a9d0-59d24419782e#__supported_data_sources
    http://artisconsulting.com/Blogs/GregGalloway

  • Analysis Services Processing Task - Error processing

    Hi all,
    I have a SSIS package containing an Analysis Services Processing Task. In case it fails, I want to insert the error messages in a table. I have create an SSIS package that fails because of dimension values that are not in the fact table. The package fails and
    shows a number of errors in the debug window:
    Error: 0xC1000007 at Create Cube, Analysis Services Execute DDL Task: Erreur interne : L'opération n'a pas abouti.
    Warning: 0x811F0001 at Create Cube, Analysis Services Execute DDL Task: Erreurs dans le moteur de stockage OLAP : 
    Clé d'attribut introuvable lors du traitement de : Table : 'dbo_SSIS_DATA', Colonne : 'PRODCODE', Valeur : 'HUME'. L'attribut est 'PRODCODE'.
    SSIS package "Step 2 - Create Cube.dtsx" finished: Failure.
    However in the error list window there are 0 errors and 0 warnings.
    So, why doesn't it show an error message in the error list when the package clearly fails. And how can I get the error messages from the log into a table? Thanks in advance.
    Hugo

    Error list does not reflect what is getting to be logged, it is more for package validation.
    But the same errors will show up in the status, and the output window.
    Furthermore, if your log is table bound (e.g. the sysssiserrorlog) and in the log config you chose to log the OnError events then these will be captured automatically.
    Arthur
    MyBlog
    Twitter

  • Analysis Services failing to Start . File system error: Error occurred during the creation of directory

    Hello All,
    Posting this problem here and hoping for a solution from the experts in this forum.
    When i have restarted the Analysis Services , i see that it has been stopped but never started back. It fails with an error
    "The SQL Server Analysis Services (MSSQLSERVER) service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs."
    When Checked the Event Viewer i see the following error -
    The service cannot be started: The following system error occurred:  The filename, directory name, or volume label syntax is incorrect.  File system error: Error occurred during the creation of directory: '\\?\E:\OLAP\MSSOLAPFactory\OlapData;M:\Test
    Backup'.
    I remember changing the BackupDir value of Analysis Services few days back, and i think it could have impacted. Can you please help me how can i change back the BackupDir value and have the server back?
    Let me know if you need any more details
    SG

    Is this still an issue? If so, I would find msmdsrv.ini and make sure you don't have two folders listed in the BackupDir (or DataDir or TempDir). You'll have to runas Administrator to edit the msmdsrv.ini file and save changes. Once you fix that, it should
    succeed.
    http://artisconsulting.com/Blogs/GregGalloway

  • Generic service 'Analysis Services (TEST1)' could not be brought online (with error '1060') during an attempt to open the service. Possible causes include: the service is either not installed or the specified service name is invalid.

    Hi,
    We have a cluster with 2 nodes. Everything works fine in Node1. When I try to failover TEST1 database to Node-2 it fails with this message.
    Generic service 'Analysis Services (TEST1)' could not be brought online (with error '1060') during an attempt to open the service.  Possible causes include: the service is either not installed or the specified service name is invalid.
    Any help is much appreciated.
    Thanks

    Hello,
    The error message is pretty straight forward, it's saying either the service isn't installed or it's not installed as the same service on that node. Did you install analysis services on the second node (from the error it seems like it isn't)?
    Sean Gallardy | Blog |
    Twitter

  • Analysis Services Execute DDL Task Internal error

    Hi all,
    I need help in solving this sporadic problem...  the dimension below (blanked out as xxxx) is based on a view.  The cube processes fine many times - but fails - abruptly once a week... it's being called from a sql job.
    Any ideas?  Thanks in advance!!
    Error: 2010-06-28 15:45:17.69     Code: 0xC1000007     Source: xxxxxxx Analysis Services Execute DDL Task     Description: Internal error: The operation terminated unsuccessfully.  End Error 
    Error: 2010-06-28 15:45:17.69     Code: 0xC11F000D     Source: xxxxxxx Analysis Services Execute DDL Task     Description: Errors in the OLAP storage engine: An error occurred while the 'xxxxx' attribute
    of the 'xxxxx' dimension from the 'xxxxxx' database was being processed.  End Error  Error: 2010-06-28 15:45:17.69     Code: 0xC11F0006     Source: xxxxxxx Analysis Services Execute DDL Task    
    Description: Errors in the OLAP storage engine: The process operation ended because the number of errors encountered during processing reached the defined limit of allowable errors for the operation.  End Error  Error: 2010-06-28 15:45:17.69    
    Code: 0xC11C0002     Source: xxxxxx Analysis Services Execute DDL Task     Description: Server: The operation has been cancelled.  End Error  DTExec: The package execution returned DTSER_FAILURE (1). 
    Started:  3:45:00 PM  Finished: 3:45:17 PM  Elapsed:  17.328 seconds.  The package execution failed.  The step failed.
    Harsh B

    (From http://msdn.microsoft.com/en-us/library/cc966526.aspx)
    "ExternalCommandTimeout is a server property that is used to set the number of seconds that SSAS should wait to time out when issuing commands to external data sources, such as relational and other OLAP sources."
    "ExternalConnectionTimeout is a server property that is used to set the number of seconds, by default, that SSAS should wait to time out when connecting to external data sources, such as relational and other OLAP sources."
    What you set it to, it's absolutely up to you... But as I see it in your log, your task failed in 17 and 9 seconds... So I think you can multiply the values by 10, I guess the situation won't change... But it is worth to check it at least.
    So... How often your fact table gets new (degenerate) dimension reference values? Is it a process update, or a process full command? I really would like to see it :)
    -- Zoltán Horváth
    -- MCITP SQL Server Business Intelligence Developer 2005, 2008
    -- Please mark posts as answered or helpful where appropriate.

Maybe you are looking for