PowerView worksheets lost when reopening Excel documents

I have a test machine that is a clean installation of Office 2013 for testing PowerView.
When I create a PowerView worksheet in Excel 2013 and then save the Excel document, the PowerView sheets are not saved. When I reopen the Excel document all the PowerViews have been replaced with images.
Does this happen to anyone else?
I haven't found anything in the documentation that says anything about not being able to save PowerViews within Excel documents.

Yes, it looks like a sheet of paper.
When you tap that, you have to scroll left or right to go through the sheets. Select the one you want and then tap on it to go into it.

Similar Messages

Character Styles lost when reopening a document

Having set Character Styles as usual (in this case with green type), when I reopened the same document all the type to which I had previously applied styles all reverted to black. When I checked the Character Styles list the green was as exactly as I had specified it, but it nevertheless displayed as black in the document.
What am I doing wrong?

Thanks Monika. I think I went through all the steps mentioned in the post you suggested, including loading swatches first. The problem is that I'm working on a map with hundreds of names already positioned – I simply want to change the font and other attributes without having to retype all the names. This is fine until I close the document and reopen it when, annoyingly, most of the names (not all of them, oddly) display in black. Fortunately, each class of name (towns, rivers, etc) are on a different layer, so it's not altogether difficult to reapply styles – just annoying that I should need to do it at all.
From what I've read, this appears to be an ongoing problem. I'm using CC on a Mac, btw.

HP Laser Jet P2055 slow when printing Excel documents or from databases.

I work for a company that is deploying 100s of this model of printer and for some reason Excel documents and print jobs sent from databases print out extremely slowly. It takes 2 to 7 seconds per page depending on what is being printed.
The way we are setup is with a Windows 2008 print server with print queues on it. We use only the HP universal print driver on this particular print server and it is against our standards to install the printers locally. Also all of our printers have been updated to the firmware 20101025
After doing a lot of troubleshooting I found that this appears to happen anytime I use either of the following printer drivers with this printer.
HP Universal Print Driver ver 5.01, 5.1, 5.2, 5.3 Both in Windows XP and in Windows 7 and with both PCL 5 and PCL 6.
HP 2055 PCL 6 ver. 61 in Both Windows XP and in Windows 7.
I have also tried connecting the printer locally to see if that helps but I experience the same issues. So far the only work around I have found is to use an older print driver for a down level printer. For example the P2015 and 1320n print drivers appear to work better though there is still a slight delay.
An additional step I tried is leaving the tray open when I send the print job. This appears to force the printer to spool the print job correctly though there is still hesitation it just isn't as pronounced. For example with a 10 page Excel document once I push the tray back in the printer will print 4 pages then pause, print 3 more pages, then pause, then print 2 more pages, pause then print the final page. This has happened with all 5 P2055x printers that I have tested it on.
Please help, we need to get this resolved because this particular printer is the only model we are currently allowed to use. I'm hoping a newer firmware than 20101025 might be on the way?
Ren

To get your issue more exposure I would suggest posting it in the commercial forums since the Laserjet 1320n is a commercial product. You can do this at Commercial Forums - Printing and Digital Imaging.
In the meantime, the support page for your product may help:
HP LaserJet 1320 Printer series Support
I hope this helps!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

TOC format lost when reopening document

I have just received a replacement Intel Core 2 Duo iMac for my previous Intel iMac. I firewired over all my files and programs to the new machine. I then tried to open a large document which had been created using my own templates on my previous iMac.
On opening this file the placement of all the text boxes, graphics and pictures has been lost. On investigation I have discovered that the problem is to do with the loss of formatting in the TOC - the style for one of the TOC headings changes to a larger, embolden font, which knocks the TOC onto two pages, which then affects all the other pages. By the end of a 44 page document, it has increased the pagination to 50 pages. The non-text layer objects, as they are 'fixed on page' remain where they were originally, but their interaction with the text layer creates a complete mess. Reducing the TOC back down to one page does not help, as all the graphics then move up with the surrounding text instead of staying put.
I have spent this afternoon reformatting the whole document from scratch. I then saved my changes, but on reopening as the TOC formatting has changed, then the document is in the same state as it was before.
Although I have experienced this TOC problem before, it is only since I migrated to this iMac that it has had upset all the formatting of the document. Previously if I reduced the TOC back down to a single page, the text and graphics interacted correctly and there was no additional adjustments to be made.
Is there any way that I can make the TOC stable so that it does not have such a detrimental affect on a large document?
iMac 5.1 Intel Core 2 Duo Mac OS X (10.4.7) MacBook 1.1; iPod Shuffle

You're welcome. Just to be clear -
All links in a TEMPLATE file should be one of three kinds -
1. Relative to the template file, e.g.,
<a href="../ (meaning that you must go up one level from the template folder
to reach the root of the site, hence all other files, since none of them
should be in the templates folder)
2. Relative to the site root, e.g.,
<a href="/ (meaning that one would begin looking for the linked file at the
root of the site and follow the pathing from that point)
3. Absolute, e.g.,
<a href="http:// (meaning that the link is to a page external to the site).
If you see any DOCUMENT RELATIVE LINKS that don't begin with "../" in a Template file, you can be sure that something is wrong.

When reopening my document to work on it, 2nd page was not there.

I was working on editing an iPages brochure. When I reopened it a few hours later, the second (back) page had disappeared. All other times I had previously closed and reopened it, both pages had been there.

We always start to get worried when the poster doesn't know what application they are using.
When a page disappears in Pages it is due to the text filling it no long extending onto the page.
Each page in a Word Processing document only exists if it has text on it. If there is no text on it the document contracts to the last page that does.
My suspicion is that you have hammered away at the spacebar, tab and return keys to position text and objects.
You probably have images with text wrap on them that pushes text out of the way. Depending on where those images are placed, text can pop back and forth altering the layout, which is why not using accurate type layout is such a bad idea.
Menu > View > Invisibles/Layout
…and you will see what is where. Click on the end of your last visible page:
Menu > Insert > Page Break
…and your missing page should reappear.
Peter

Warning from Excel when opening Excel document in JSP

Hi,
I populate a HSSFWorkbook with data retrieved from a database using user input. I then want to open the excel file up so the user can see it.
This works fine, but prior to the file opening I get a warning message from Excel saying that the file is of another format etc etc do you still want to open. It actually takes the name of the JSP page as the name of the file I want to open. The file opens if I ignore the warning.
I do the following when opening the file:
FacesContext facesContext = FacesContext.getCurrentInstance();
ExternalContext externalContext = facesContext.getExternalContext();
HttpServletResponse response = (HttpServletResponse) externalContext.getResponse();
ServletOutputStream out = null;
try {
// Initiate servlet response
response.setContentType("application/vnd.ms-excel");
response.setHeader("Content-disposition", "inline;filename=\"" + excelSheet.getFile().getName() + "\""); //ExcelSheet getFile() returns java.io.File
out = response.getOutputStream();
excelSheet.getWb().write(out); //get HSSFWorkbook
// Finalize task.
out.flush();
} finally {
// Gently close stream.
close(out);
Any tips?

This would occur only in a certain widely used webbrowser developed by a team in Redmond. It completely ignores the filename part of the content disposition header, takes the part after the last slash of the URL as the actual file name, examines its extension against the platform specific list of file associations and in case of an unknown filetype it reads the content type header and gives a warning before when the content type is different.
To solve this problem, you need to append the filename as part of the URL. You can get some ideas out of this: [http://balusc.blogspot.com/2007/07/fileservlet.html].
Its market coverage if fortunately shrinking, but until then we, developers, have to live with that product. It works perfectly in all other webbrowsers.

File Server Crash when opening excel document

Hi,
I'm having a strange issue.
We have a 2012 file server (clustered), now when a user emails a UNC link to a file (excel)on this file server, everyone in the company (250-300 users) seems to open this at around the same time and then all resources on the server then seem to be denied.
Not just to this file. No failover, just unable to access anything else on this server.
Here's what nagios tells me, No memory issues, A cpu spike to 20%around the time.
Nothing in the cluster log, nothing in application,system event logs.
The network card is 4*1gb/s teamed (nagios/whatsup gold say this isnt being hammered)
Any ideas on how I can troubleshoot further?
Phil

1. Check whether event ID : 2011 and 2012 event ID's are registering in event viewer.
2. I am suspecting issue at IRPStack size limit, Since all users are accessing at a time
3. If you are suspecting issue at Handle count side,
4. Identify the handle count which is more than 5000 and perform according to application.
You can refer below links to work with Handles.
http://blogs.technet.com/b/markrussinovich/archive/2009/09/29/3283844.aspx
http://social.technet.microsoft.com/Forums/systemcenter/en-US/93f74af5-d43c-4dd9-98f0-8fb77a97b652/healthservice-high-handle-count-on-operations-manager-2012-management-server?forum=operationsmanagergeneral
http://blogs.technet.com/b/yongrhee/archive/2011/12/19/how-to-troubleshoot-a-handle-leak.aspx
http://my.opera.com/Lee_Harvey/blog/2013/07/27/resolving-high-handle-count-in-windows-system-process-pid-4
Regards,
Manjuanth Sullad

When reopening a document after making a change and saving, the change has not been saved. A

Adobe Reader X

Here's a test to see where the problem lies.
Open the file in Reader X
Make a change
Save the file to desktop.
If it isn't the same computer with Reader 9, copy this to the other computer, perhaps using a memory stick.
Open the file in Reader 9.
Is the change showing up in Reader 9?

SharePoint 2007 - Invalid Token Error when Generating Excel Worksheet with ItemLevelAudit

All,
I have the AuditLevel project located here working on a test site:
https://msdn.microsoft.com/en-us/library/office/bb397403(v=office.12).aspx#MOSS2007ItemLevelAudit_AuditingwithSharePointServer2007
Since I'm a site collection admin - I can access a document and go to View Audit History.
When I click the button to Generate Excel Document - if I've viewed the document I get the following error
since I have a ' in my name - is this due to AD or can this be fixed in code - I did run a
Replace ' with '' in each of the page loads on any aspx pages I saw
string s = "'";
string escaped = s.Replace("'","''");
'//s:si[s:t='O'Neill, Kevin']' has an invalid token.   at MS.Internal.Xml.XPath.XPathParser.CheckToken(LexKind t)
   at MS.Internal.Xml.XPath.XPathParser.ParsePredicate(AstNode qyInput)
   at MS.Internal.Xml.XPath.XPathParser.ParseStep(AstNode qyInput)
   at MS.Internal.Xml.XPath.XPathParser.ParseRelativeLocationPath(AstNode qyInput)
   at MS.Internal.Xml.XPath.XPathParser.ParseLocationPath(AstNode qyInput)
   at MS.Internal.Xml.XPath.XPathParser.ParsePathExpr(AstNode qyInput)
   at MS.Internal.Xml.XPath.XPathParser.ParseUnionExpr(AstNode qyInput)
   at MS.Internal.Xml.XPath.XPathParser.ParseUnaryExpr(AstNode qyInput)
   at MS.Internal.Xml.XPath.XPathParser.ParseMultiplicativeExpr(AstNode qyInput)
   at MS.Internal.Xml.XPath.XPathParser.ParseAdditiveExpr(AstNode qyInput)
   at MS.Internal.Xml.XPath.XPathParser.ParseRelationalExpr(AstNode qyInput)
   at MS.Internal.Xml.XPath.XPathParser.ParseEqualityExpr(AstNode qyInput)
   at MS.Internal.Xml.XPath.XPathParser.ParseAndExpr(AstNode qyInput)
   at MS.Internal.Xml.XPath.XPathParser.ParseOrExpr(AstNode qyInput)
   at MS.Internal.Xml.XPath.XPathParser.ParseXPathExpresion(String xpathExpresion)
   at MS.Internal.Xml.XPath.QueryBuilder.Build(String query, Boolean allowVar, Boolean allowKey)
   at MS.Internal.Xml.XPath.QueryBuilder.Build(String query, Boolean& needContext)
   at System.Xml.XPath.XPathExpression.Compile(String xpath, IXmlNamespaceResolver nsResolver)
   at System.Xml.XPath.XPathNavigator.Compile(String xpath)
   at System.Xml.XmlNode.SelectSingleNode(String xpath, XmlNamespaceManager nsmgr)
   at ItemAuditing.AuditLogWorkbook.XLInsertStringIntoCell(String sheetName, String addressName, String value)
   at ItemAuditing.AuditLogWorkbook.WriteCell(String celladdress, String cellvalue)
   at ItemAuditing.AuditLogWorkbook.WriteEntry(String User, String Occurred, String Event, String Version)
   at AuditLogWorkbookHandler.<>c__DisplayClass1.<ProcessRequest>b__0() in c:\Program Files\Common Files\Microsoft Shared\web server extensions\12\TEMPLATE\LAYOUTS\AuditLogWorkbook.ashx:line 54
   at Microsoft.SharePoint.SPSecurity.CodeToRunElevatedWrapper(Object state)
   at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass4.<RunWithElevatedPrivileges>b__2()
   at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode)
   at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param)
   at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated secureCode)
   at AuditLogWorkbookHandler.ProcessRequest(HttpContext context) in c:\Program Files\Common Files\Microsoft Shared\web server extensions\12\TEMPLATE\LAYOUTS\AuditLogWorkbook.ashx:line 30
   at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
   at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)

Hi Alan J Stewart,
This issue may occur due to the column name in your scenario.
Would you please change the column name: raised by column to “raised_by”, and export the list with this column, check whether the issue persists.
I have seen similar issue that caused by the column name.
Thanks,
Qiao
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Qiao Wei
TechNet Community Support

I have downloaded and installed the latest version of numbers on my mac. Everytime I save and then try to reopen that document, I receive a message telling me that I need a new version of numbers. Also, when I try to sort the date column, it sorts out of

I have downloaded and installed the latest version of numbers on my mac. Everytime I save and then try to reopen that document, I receive a message telling me that I need a new version of numbers. Also, when I try to sort the date column, it sorts out of order. The last version sorted fine.

Welcome to Apple Support Communities
When you install the new iWork version, the old iWork version is kept, so it looks like you are opening your old version.
To fix this, open a Finder window, choose Applications in the sidebar and drag the new Numbers version to the Dock, so you can access to it quickly. Open all documents from this version. I don't recommend you to delete the old Numbers version in case you need it.
Respecting to the second question, you will get better answers in the Numbers for OS X forum

Time out when trying to open Word/Excel document from portal

Several of our users have been timing out when trying to open/download documents stored in our portal.
The error message is "Download failed. Connection to server was reset."
Is there some obvious setting that I am missing here?
It happens with things as small as 200K - Word and Excel documents.
thanks!!

Hi Gary Jiang,
Thanks for posting in MSDN forum.
This forum is for developers discussing issues about
apps for Office.
Based on the description, it seems that you got an issue when you deploy the code sample. If I understood clearly, I suggest that you contact the author of the code sample from the "Q and A" tab.
Also if you have the question about WOPI, I suggest that you get more effective response from
Office
Protocols forum.
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

"An error occurred sending the command to the application" When trying to open excel document from outlook 2007

Error message "An error occurred sending the command to the application" When trying to open excel document from outlook 2007.
OS: Windows Server 2008 R2
If I save the document then it opens fine, messing with default file associations does not resolve this problem, I've googled for ir it and some suggest unticking compatibility mode or "run as admin" for excel application, neither is selected in my case.
Outlook is configured to run as remote application from remoteApp server, this error is only occurring for one user, for others excel documents open just fine.

Hi
Thank you for using
Microsoft Office for IT Professionals Forums.
From your description, we can Create a trusted location follow these steps
Click the Microsoft Office Button , and then click Excel Options.
Click Trust Center, click Trust Center Settings, and then click
Trusted Locations.
If you want to create a trusted location that is not local to your computer, select the Allow trusted locations on my network (not recommended) check
box.
Click Add new location.
IMPORTANT We recommended that you don't make your entire
Documents or My Documents folder a trusted location. Doing so creates a larger target for a hacker to potentially exploit and increases your security risk. Create a subfolder within Documents or My Documents, and make only that folder a trusted location.
In the Path box, type the name of the folder that you want to use as a trusted location, or click Browse to
locate the folder.
If you want to include subfolders as trusted locations, select the
Subfolders of this location are also trusted check box.
In the Description box, type what you want to describe the purpose of the trusted location.
Click OK.
More detailed information you can refer to this link:
http://office.microsoft.com/en-us/word-help/create-remove-or-change-a-trusted-location-for-your-files-HA010031999.aspx?CTT=1#BM12
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
I can do for you, please feel free to let me know.
Hope that helps.
Sincerely
William Zhou CHN
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

How do I convert an excel (2008) document to Numbers? When I drag the Excel document onto the Numbers icon I get, "Import error. The file format is invalid"

How can I convert an Excel (2008) document to Numbers. When I drag the Excel document onto the Numbers icon I get, "Import error. The file format is invalid.

That extension identifies the most current Excel file format, a format that can be opened by Numbers '09 (and by Numbers '08).
A check with Numbers '09 shows it capable of opening .xlsx files when right-clicked (and Numbers chose as the application to open, when double-clicked (if Numbers has been set as the default application to open this type of file, or when dragged to the Numbers icon in the dock.
I see two possibilities for Numbers inability to open it and the message you receive:
1. The file is not actually an Excel file, and the sender has added the .xlsx extension to the filename manually.
2. The file is an Excel file, but has somehow been corrupted.
Have you tried opening the file with a different application? The open source Office suites, OpenOffice.org, LibreOffice and NeoOffice can also open .xlsx files. If they're unable to open this one, that would point toward the file itself being faulty. You can download these applications from their rspective websites, linked in the names above. All request a donation to support future development, but only Neo requires one to have been made recently, and that only for the current release (which won't be necessary to open .xlsx files).
Regards,
Barry

Suddenly, all my saved Excel Worksheets are opening as Numbers documents, even though I've NEVER used the Numbers application, and even though the documents continue to be identified as Excel documents--losing years of work. What happened?

How can I uninstall Numbers? I've never used the Numbers application before, and suddenly all my saved Excel Worksheets are opening as Numbers documents, even though they continue to be identified as Excel documents? I'm losing years of work.

Right click on a Excel Worksheet file, choose 'Get Info'. In the small window that opens change the 'Open with:' from Numbers to Excel. Click on 'Change All…'

When I create a PDF from Excel, there are blank cells in Excel document, when they convert to PDF the blank cells have data in them?

There are cells in the excel document that have formula's in them. The formulas are pulling data from other blank cells, so that is why they are blank in the formulated cells. So in Excel, they are just a dash. When I create the PDF, the document gets opened in Acrobat and the once blank cells have data in them. Not sure why there is data in those fields on the PDF if its blank on Excel.

Not really sure that I fixed the problem, but I did find a work around and wanted to post it if someone else runs across the same issue. Apparently the document creator used lots of custom rules and shading. If I pulled up the custom rules and shading palette and just unchecked both the custom ruling and shading boxes, it allowed me to create the print file correctly--the disappearing part numbers were on the new PDF. I didn't have to update the whole book which I didn't want to do because I feared it would mess up the rules and shading. Just unchecking the box before creating the PDF solved that issue for my purposes.

PowerView worksheets lost when reopening Excel documents

Similar Messages

Maybe you are looking for