PPOME and PPOCE

Hi Expert,
While create/update the basic data i.e shot and long text for org. unit or position or job through transaction PPOME or PPOCE. System is not able to save the shot and long text. It's giving message "record saved" but when I again checked the shot and long text it's given Organizational - New org unit and New organizational unit, not the one which I saved.
Thanks
Abhi

Dear Abhi,
Please implement Note no. 1156683 in your system which will solve your problem.
Regards
Christine

Similar Messages

Whats the diff between PPOC and PPOC with Work flow?

Hi,
Can any one please tell me out the difference between Creating Organisational Structure under OM and creating under "Tools" with Work Flow ?
on Creation what would be changing factors between them?
And Explain me about Work flow and how it will be useful and also where and all it reflects in SAP HR?
Regards,
Vinoth Kumar.R

Hi
I need the procedural difference between PPOCE And PPOCE with work Flow.
Suppose if i need to create with PPOCE with work flow, is the Procedure would be the same or additionally I need to Activate some thing, It Might be very much Basic but i didnt work on othat so far.
If there is any notes or Links to learn about it, please forward as it is helpful.
Regards,
Vinoth Kumar.R

PPOME and Reporting Structure

I have created two positions (TST_1 and TST_2) under an org unit via PPOME. I want TST_2 to report to TST_1. I should be able to create this relationship through PPOME right? These are the steps I'm taking...
1. PPOME
2. Under the org unit, highlight TST_1
3. Choose 'Reporting Structure' from the drop down
4. TST_1 is still highlighted. Then I click 'Assign'
5. Then highlight 'Is line supervisor of ... Position' in the "Choose Relationship" pop-up, hit the green check mark
6. The next pop-up is "Choose Position", however there are no position objects to choose from
I have both TST_1 and TST_2 positions saved under my org unit; any idea what I can check to find out why TST_2 isn't appearing in my step #6 list to assign to TST_1?
Thanks!

nevermind, figured out the issue.

IT 001, PPOME AND AD HOC QUERY

hi
i have an issue regarding all employees that their job description is ok in ppome but wrong in IT 001 and in ad hoc query
can any one have solution?

Hi,
In table T77S0 (transaction SM30) you can set up what will be transferred to PA IT 0001 from OM:
'X': Transfer short text of org.unit to Personnel Administration
' ': Transfer long text of org.unit to Personnel Administration
PLOGI     TEXTC for Job
PLOGI     TEXTD for Org.Unit
PLOGI     TEXTS for Position
Cheers

FMEA / xRCM with SAP PM

HI,
I have few questions about using Failure Mode & Impact Analysis & Reliability based maintenance with SAP. They are as below:
1. SAP provides the FMEA functionality but in QM module - Whether it can be used for SAP PM objects?
2. I could find the SAP note '1954644 - Meridium Reliability-Based Asset Management for SAP® Solutions - EBS partnership details' but no further dtails on the solution / integration points. Can any one forward me the link to this solution?
Many thanks

Hi,
You are missing/check for completion of some of the steps which are need to see demands from PS in MRS Planning board.
Create Org unit using transactions PPOME and PPOCE.
In PPOCE, create postions of the node, create user/person to that position and assign resource under that position.
In short your Org unit node will have a hierarchy as O_S_P (Organization_Position_Person).
Then to PP01 and maintain relationship between Org unit and Postion.
Then using SA38 and program run the availability transfer report /MRSS/HCM_RPTWFMIF for the resources.
Then go to transaction /MRSS/PLBOSRV
Thanks,
Sudhakar

Organisational structure in PPOME/PPOCE

Hi all.
I've got my organizational structure in PPOME and I want to perform a copy of the entire structure. I've tried to copy it by right clicking (copy) on root node but It doesn't work.
Can you help me?
Thank you in advance.

Hi David,
One way is that since you have the data with you in Tables Downlaod it and Upload it using BDC or LSMW
There is also a Transaction code for Creating Sequential File "OOMV" -> This will automatically create a Batch file for you depending upon the Selection criteria you have enter on the selection Screen
User Transaction "OODT" to upload the sequential file later into the system.
Note: Keep the number range in mind before uploading it may be Internal or External Number ranges.
Hope this helps you.
~Bhawanidutt

SRM- Pucchase Order and Contract (backend) Tolerance failures

Using SRM 7 Extended classic scenario with ECC 6.0. Tolerances have been set up in ECC and SRM.
The Contract is raised in the backend and replicated into SRM.
In SRM, both PPOMA and Vendor groups have been assigned the correct TOG.
Raising a Shopping Cart that exceeds the Contract Target value, but it within the Tolerance, works fine. However, once the Shopping Cart is approved, the back end PO creation fails, leaving the SC status as Saved. A review of SLG1 says that the PO exceeded the Contract value and displays errors for both Quantity and Target Value.
Any ideas on where to investigate appreciated.
Regards

S0001334469 wrote:>
> Muthu
>
> If I create a PO in the backend then it works within my defined tolerances. When I create a PO via SRM Shop Cart, teh shopping cart is ok but when it gets approved, the SRM PI is created but the backend PO is NOT created - and the SC status is set to Saved in the Follow On Documents for the Purchase Order. Seems that tolerances are being ignored.
>
> 'TOG' is the Tolerance Group - needs to be assigned to Vendor group and HR Org Structure (PPOMA) in SRM
>
> Gerry.
Hi Gerry
give more precise data about TOG you given in org structure
so you will get more suggestions from other people. it is power of SDN
created PO successfully in ECC via ECC request
no PO created successfully in ECC via SRM request
give more data on sc /pr /contract data ( quantity or value contract) for better understanding
Muthu
I'm having similar problems btu with repsect to SRM PO's against Contracts raised in the backend (replicated into SRM)
Our infrastructure -s SRM 7 Extended Classis Scenario and ECC 6.
I have tolerances setup in ECC and SRM and the TOG has been assigned in SRM Vendor Groups and in the HR Org Structure (PPOMA).
Tolerance are 5% up to $100.00
If I raise a Contract in ECC, and a PO (MM) in ECC, then the PO will work if I stay within the allowed tolerances.
When I raise a PO in SRM, the Shopping Cart is processed OK, but when the SC is approved, the backend PO is not created.
In the Shopping cart in Related Documents for document Purchase Order, the Satus is set to Saved. A review of SLG1 indicates error due to exceeding the quantity and the Target value.
Why are tolerances not being taken into consideration? How do I get this to work?
Gerry

PPOME HOLDER NAME IS not displayed

Here is the case ..whena person is retired ..wht we do currently is run a retire action ...and the person is placed in a retirement org unit ..Wwe go to ppome ..we can can c the person who has retired .
Now when he is dead ..his wife needs to get the benefits ..or his wife carries forward his benefits .
In such a case wht we do ..is to just the Wives name on the system ..we perform anthoer action survivor with benefits .
which is similar to Hire action ..where she is hired on the position of the her reitred husband .
It delmits the postiion which the Husband held as per the date of his death and the Places the wife as a new postion Holder .
When iperfrom this action everythign goes fine ..series of infotypes are maintained .
I check pa30 ..all details 1 ,2 infotypes are updated as per the spouse details .
Now thw problem starts
when i go to ppome and enterthe position no ..It shows the Holder icon but no details ..Name nothing no details ..
Wwhat could be wrong ..
I guess something goto towith the ppome screen where its pulling the details ..
Kinldy help me out here .
Regards
San

As Arti stated check the details for holder relationship in PO13. If the relation is not created then you will have to run RHINTE00 report for the spouse.
Are you loading the spouse action through PA40 or through some program?
If program then you will have to run report as stated.
Also in PPOME check the period for which you are checking the data.
cheers
Ajay

Integrating the OM infotypes in the Column area in PPOME Screen

I am trying to integrate om Infotypes itno the column Configuraton area in the Screen PPOME and going through the Hierarchy Framework-Column Framework
Tables
T77ARRAYTP
T77ACOLC
T77COL
T77FRIEND
and after doing a ton of changes nothing changes in the Column framework.Does anybody have an idea

Dear Praneeth,
Thanks for your response. Yes I am aware of the above threads.
I will explain my exact requirement here:
We have created 5 Custom Objects (For Eg. 1,2,3,4 & 5). This newly created Custom Objects has an Allowed Relationship A/B 003 with the Object Org Unit.
For Eg : I have Created Org Unit and related those Custom Objects (1,2,3,4 & 5) using A/B 003 Relationship through Expert Mode.
However, I do agree we could not able to view through PPOME/PPOSE Screen since it is Custom Object.
In this case, I will create a Custom Infotype where i will be maintaining those Objects relationship against the particular Org Unit. Later I shall add it as Tab Page in the Detail Area.
My question is it possible to do as I mentioned above?
Apart from the above, please suggest can we able to add IT1001 Infotype as a Tab Page in the details area through configuration?
Regards,
Manikandan N

Multiple position for one central person and one user

Dear Guru's,
I have a requirement to create multiple position for a existing User - which already has CP Central Person and S Position.
How to create this new position and assign the same CP to all the new positions ?
Thanks and regards,
Anil Rajpal

Hi
Yes you can definitely do this
Create the new position and assign the CP to this position in transaction PPOME. You may find the position first there in PPOME, and then drag-drop the CP over the position to make the assignment. System will ask the percentage of responsibility.......which you will ve to enter...
Regards
Virender Singh

"No entry in the table T589A for P" in PPOME's custom Tab

Hello,
requisites: Add one custom Tab to transaction PPOME relative to Position (Object type S)
problem:"No entry in the table T589A for P" when entering the transaction PPOME, and choose my new added Tab.
I get this error message "No entry in the table T589A for P" when entering the transaction PPOME, and choose my new added Tab.
The thing is, if I comment the line "MODULE BEFORE_OUTPUT" in subscreen 7000 of the infotype (the tab is infotype specific) this error disappear. But then the data entered in the tab, which should be relative to one position (type S), is now displayed for all positions. When leaving the transaction, and entering again, in the same tab, the data has disappeared.
I think I should not comment this: "MODULE BEFORE_OUTPUT"
Why is this error being raised, and what must I do do stop it?
Thank you.

Hi,
The table T589A is a configuration table pertaining to the pf status of the infotype. I changed the pf status of the infotype i.e. added my own buttons on application tool bar. May be cos of that it is giving error. Not sure.......

PPOME

Hi All,
In our project, whenever a user open PPOME, one org unit defaults on PPOME page. So, I mean, for each user it is different org unit that automatically defaults on PPOME.
Pls can someone give me a lead as to how PPOME is defaulting the org units based on users.
The other thing is that, for example, i tried to acces org unit 50000461 via PO10 and i was able to display/change. but when i access the same org unit via SEARCH TERM in PPOME, it says no objects found. I check authorizations & structural authorizations and everything seemed fine.
Are there any specific authorizations exclusively for PPOME?
Thanks

Hi,
regarding the object defaulted, it is always the last one you have used there. It is possible to initilizate that using report RH_DELETE_USER_SETTINGS, with option 'Delete Last Object Selection' for the user.
Regarding your second quarion, there are no specific authorizations for PPOME. Same authorizations are used in PPOME and PO10 (structural authorizations and authorization object PLOG). Do you have access to the object fo all periods?. Maybe the reason is the selction period in PPOME.
Regards,
Ana

Copy infotypes organization unit ppome

Hi.
We are with an upgrade and we are copying infotypes from organization unit in PPOME and the infotypes copied aren't the same in both systems. Are there any database table where you indicate the infotypes to be copied.
Thanks.
Regards.
Jose

Hi,
You could find a list of infotypes off the IMG. Are you looking for PA or PD infotypes?
Try RPUAUD00 Infotype Log Documents
OR
T512Z Permitted Wage Types for HR.
Regards,
Amit Lal

Object history ppome

Hi.
When you are in ppome and click in the object history it shows you information.
Where is this information stored?
i am debugging and i don't find this information, becasuse it is empty but it should show me some information.
thanks.

The standard APO system does not show change log for a PPM.
There are 2 non-standard ways:
(1) R3 system- Write a program for checking the combined change log for Routing+ BOM + Production version
(2) APO PPM: Write a custom program which is not going to be an easy task
I am sure someone must have implemented this. Lets wait and see if we get responses
Thanks
Kumar

PPOME/PPOSE

Hi ,
In my system, upgraded from 4.6c to ECC6 for the transactions PPOME and PPOSE I get the details of the Org.Units and Persons when I double click on them but I am not getting the display of Position and Job in the object Manager. I have checked all the settings not sure why they are not coming up in Display.
Would appriciate any help.
Regards
Uday

Hi,
Check your Search Help for Position and Job.
Good Luck
Om

PPOME and PPOCE

Similar Messages

Maybe you are looking for