PR CS6 Incorrectly Shows Remaining HD Space

In Premiere CS 6 on Mac, no matter which hd I set as the scratch disk it doesn't update the remaining space available.
For instance on my main hd, in PR CS6 it shows only 167.8 gb available when I have over 400 gb available.
Austin

As well as mentioning here, which may or may not have an Adobe employee read your message, you might want to make a bug report
Bug Report and Feature Request https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Similar Messages

Finder showing incorrect amount of free space

After the recent Mountain Lion update, my Finder now shows an incorrect amount of free space.
I have a 500GB hard drive, and I have about 150GB free.
After the update, finder says I have 478.4 GB free?
That looks like the total capacity, after you account for system software. I've done a PRAM and SCM reset, disk verification and repair, but still no joy.
Any thoughts? Is it a bug in the update?

Here is the answer....
zchrykng
Re: Hard drive available space shown incorrectly in finder Jan 12, 2012 7:35 PM (in response to ilari Korte)
This is probably like the issue that I was having on my MacBook Pro. If you are using Time Machine on a laptop it stores the diffs in a file on your hard drive. This action can be disabled with the terminal command
sudo tmutil disablelocal
This turns the local Time Machine off. It is up to you if you want to do this, but Finder shows this space as unused since it can be overwritten when needed. It saved me over a hundred GBs of space.
MacBook Pro, Mac OS X (10.7.2)

Custom column to show total remaining storage space for a host

I'm looking for a way to easily view the total amount of remaining storage space for a virtual host. At present, viewing the properties for a host in VMM is the only way to view this in the GUI. I was looking at sourcing a Powershell command to do this,
and then feed it into a custom column, for easy viewing within the VMM main window. This is probably best suited to the Powershell forums, but I placed the post here, as I may have overlooked another way to achieve this within VMM itself. Has anyone desired
for such a thing?
Many thanks.

I'm looking for a way to easily view the total amount of remaining storage space for a virtual host. At present, viewing the properties for a host in VMM is the only way to view this in the GUI. I was looking at sourcing a Powershell command to do this,
and then feed it into a custom column, for easy viewing within the VMM main window. This is probably best suited to the Powershell forums, but I placed the post here, as I may have overlooked another way to achieve this within VMM itself. Has anyone desired
for such a thing?
Many thanks.

Command to show total remaining storage space for a host

I'm looking for a way to easily view the total amount of remaining storage space for a virtual host. At present, viewing the properties for a host in SCVMM is the only way to view this in the GUI. I was looking at sourcing a Powershell command to do this, and
then feed it into a custom column, for easy viewing within the VMM main window. Has anyone desired for such a thing?
Many thanks.

Hi!
Since I find your question to be interesting, I decided to write two scripts that might be of use to the both of us, and the community, perhaps. The first script does what you wanted. As a bonus, I wrote a similar script that checks for free space on the
virtual machines.
IMPORTANT: I tested the scripts on SCVMM 2012 Service Pack 1. I do not recommend running the scripts without checking for possible compatibility issues.
You can use the scripts in several ways. For example, you could run the scripts every time before running SCVMM. Or you could create a Scheduled Task using a Group Managed Service Account. Or on wednesdays...
The scripts update the fields when ran.
Prerequisites for running the first script:
Execution Policy, of course
Custom Property: "Available Storage"
Here is the script you are looking for.
Import-Module virtualmachinemanager
$hostNames = (Get-SCVMHost | Select-Object Name).Name
$availableStorageProperty = Get-SCCustomProperty -Name "Available Storage"
ForEach ($hostName in $hostNames) {
$VM_Host = Get-SCVMHost -ComputerName $hostName
$availableStorage = $null
$availableStorage = $VM_Host.AvailableStorageCapacity / 1GB
If ($availableStorage) {
$availableStorage = $availableStorage.ToString("N") + " GB"
} Else {
$availableStorage = "N/A"
Set-SCCustomPropertyValue -CustomProperty $availableStorageProperty -InputObject $VM_Host -Value $availableStorage
In my organization, most of the virtual machines use only one disk, but 20% or more of all our virtual machines have two or three disks. That is why the second script checks free space on three disks per machine.
Of course, it is fairly easy to remove the lines where the script checks the state of the other two disks.
NOTE: If a Virtual Machine is in an unknown state (deleted configuration or missing in other way), the script returns several errors (six) for that machine. The script is not destructive in any way, it only updates the desired fields (Custom
Properties).
Prerequisites for running the script:
Execution Policy, of course
Custom Property: "Disk0 FreeSpace"
Custom Property: "Disk1 FreeSpace"
Custom Property: "Disk2 FreeSpace"
Here is the second script.
Import-Module virtualmachinemanager
Function Get-FreeSpace {
param ($disk)
If ($disk) {
$disk_freeSpace = $disk.MaximumSize - $disk.Size
$disk_freeSpace = $disk_freeSpace / 1GB
$disk_freeSpace = $disk_freeSpace.ToString("N") + " GB"
} Else {
$disk_freeSpace = "N/A"
Return $disk_freeSpace
$VM_Names = (Get-SCVirtualMachine | Select-Object Name).Name
$VM_disk0_freeSpaceProperty = Get-SCCustomProperty -Name "Disk0 FreeSpace"
$VM_disk1_freeSpaceProperty = Get-SCCustomProperty -Name "Disk1 FreeSpace"
$VM_disk2_freeSpaceProperty = Get-SCCustomProperty -Name "Disk2 FreeSpace"
ForEach ($VM_Name in $VM_Names) {
$VM = Get-SCVirtualMachine -Name $VM_Name
$disk0 = $disk1 = $disk2 = $null
$disk0 = Get-SCVirtualHardDisk -VM $VM | Select-Object -First 1
$disk1 = Get-SCVirtualHardDisk -VM $VM | Select-Object -Skip 1 -First 1
$disk2 = Get-SCVirtualHardDisk -VM $VM | Select-Object -Skip 2 -First 1
$VM_disk0_freeSpaceValue = Get-FreeSpace $disk0
$VM_disk1_freeSpaceValue = Get-FreeSpace $disk1
$VM_disk2_freeSpaceValue = Get-FreeSpace $disk2
Set-SCCustomPropertyValue -CustomProperty $VM_disk0_freeSpaceProperty -InputObject $VM -Value $VM_disk0_freeSpaceValue
Set-SCCustomPropertyValue -CustomProperty $VM_disk1_freeSpaceProperty -InputObject $VM -Value $VM_disk1_freeSpaceValue
Set-SCCustomPropertyValue -CustomProperty $VM_disk2_freeSpaceProperty -InputObject $VM -Value $VM_disk2_freeSpaceValue
If you have any questions, ask. I'll check in later.
Cheers!

After I've heard an audiobook downloaded from the public library, how do I delete it from the Shuffle? When I plug it into my computer, I get a screen showing how much space is left on the Shuffle but no list of files that I can delete. WRA

After I've heard an audiobook downloaded from the public library, how do I delete it from the Shuffle to make room for other audiobooks? When I plug it into my computer, I get a screen showing how much space is left on the Shuffle but no list of files that I can delete. These books, incidentally do not appear in the ITunes screen. WRA

Select the iPod shuffle in the iTunes sidebar (under DEVICES). If this is a current 4th (or 3rd) gen iPod shuffle, you should be able to see the contents of the shuffle by type, intented under the shuffle's name (still in the sidebar). Select Music or Audiobooks (not sure where those items from the library will be listed). The items will be listed to the right, for each category. Find the items, select, and delete.
It's on page 20 of the manual
http://manuals.info.apple.com/en_US/iPod_shuffle_4thgen_User_Guide.pdf
NOTE: If this is an 1st or 2nd gen iPod shuffle, select the iPod shuffle in the iTunes sidebar (under DEVICES). Over to the right, go to the Contents tab, where the items are listed. Select and delete them from this list.
I find it more convenient to make a playlist in iTunes with things I want to put on the shuffle. I then set up automatic syncing (or use autofill) to have iTunes load the shuffle from that playlist, automatically.

How can I add new content in iDVD to a DVD-RW disc which has ample remaining free space? After preparing the new video for burning and clicking on Burn to iDVD, I get a window saying the disc's already recorded and that I can either Erase or Eject.

How can I add new content in iDVD to a DVD-RW disc with a video previously successfully recorded on it? (The disc has ample remaining free space.)
After preparing the new video for burning and clicking in the File menu on Burn to iDVD, I get a window saying the disc's already recorded and that I can either Erase or Eject. My assumption has been that iDVD would automatically find the free space and continue with the new recording from there. I'd be grateful if anyone can shine light on this.

There are, but not with a DVD written as a movie disk. It must be closed when completed, or it doesn't work.
Apple's built in Burn utility also automatically closes any data CD, DVD or Blu-ray disk you burn. Doesn't matter how much space is unused, you can't use it. You'd have to use a more advanced disk creation app, such as Toast Titanium. I then have the option of choosing to write the data as a session:
I can keep doing this until the disk is full. If I've written five sessions to the disk, when I put it in the drive, five CD/DVD icons will appear on the desktop since the OS will treat each session as if they are separate physical disks. At any point you choose Write Disk when writing a group of data, that means you're closing the disk, and again can't add anything after that. So if I had written two sessions, and the third was Write Disk, it's over. I can't put anything else on that disk.

Open/file in CS6 only shows the blue psd file. I want to see what it looks like if open.

Open/file in CS6 only shows the blue psd file. I want to see what it looks like if open.
I posted this earlier, but now I can't find it in the forum?

You could use Bridge, or depending on your operating system, use one of the codec packs that let you view PSD thumbnails in Windows Explorer. (I don't know OSX)
This seems like a popular choice for Windows 7
http://www.softpedia.com/get/System/OS-Enhancements/SageThumbs.shtml
Personally, I just use Bridge, but I can see how an app like Sage Thumbs would be useful

HT5731 My iPad says I cannot download any more because I am out of memory. I purchased space in cloud and still get same message. I do not know how to delete shows to open space. Can you help? Thanks.

My iPad says I cannot download any more because I am out of memory. I purchased space in cloud and still get same message. I do not know how to delete shows to open space. Can you help? Thanks.

Your iPad is physically out of storage space. Purchasing space in iCloud dosen't magically give your actual iPad more physical storage space.
You need to delete content off of your iPad.
https://discussions.apple.com/thread/5122738?start=0&tstart=0
http://m.youtube.com/watch?v=mZdBQoE37FA&desktop_uri=%2Fwatch%3Fv%3DmZdBQoE37FA

PO is incorrectly showing in other sale order document flow

Hi expwrs please help me on this issue. One PO is incorrectly showing in other sale order document flow and there is no relationship between PO and sale order. Why it is showing incorrectly.

Hi,
First you check the SO created with reference and then check teh PO type (based on item category).
I think with of any reference the PO will never show on doc flow,

New canvio connect 2tb shows 101mg unallocated space in in computer mgmt admin tools

i have a new canvio connect 2tb external hard drive. model hdtc720xk3c1. when ni checked the drive in administrative tools computer management it shows both a 101mb unallocated space and a health partion. It this the master boot record. Why does it show any unallocated space. iknow 101mb is small. Could not get satifactory fron tech support. I have two other 1tb external hard drives and thers is no unallocated space
Can someone explain. Drive is working good

How about "select partition 1" and "active"?
I'd stay away from the Cruzer. You may be able to create another set of media using this trick. I'm not sure if it still works with your machine.
Boot Media
Another thing I'd like to try but haven't: create another bootable USB flash drive using that link I posted up-thread. It will be blank. Then make sure you have all the "visibility" options selected for the drive with the recovery image (don't hide system files, etc) and copy the contents of the recovery drive that won't boot to the newly prepared drive. Does that make any sense?
This kind of thing works for the Win 7 install DVD files. Just copying them to a properly-prepared flash drive will generate a usable install USB drive. I've done it many times. It _might_ work with the Lenovo media. Maybe...
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Fix the coulmn width of main report which contain the sub report( remains white space of extra width)

Hi,
I am setting the column width of main report and that column is bounded with the sub report which contain some data.
But if width is exceeded other than sub report data that width is showing as white space block.
It should be showing as normal header in gray shade.
Please provide the solution for this. see the screen attached.
Thanks

Hi Raj,
According to your description, you want to show the sub report without any white space in the textbox. Right?
In Reporting Services, when we display a sub report in a textbox, this textbox will always show the whole sub report area. If the textbox is smaller than the report area, this textbox will extend automatically to fit the size of the sub report. Otherwise,
it will has white space inside of the textbox. And if you have white space in your sub report, it will also be displayed in the textbox. So you may need to adjust the sub report size to make it fitted in main report.
Reference:
Subreports (Report Builder and SSRS)
If you have any feedback on our support, please click
here.
Best Regards,
Simon Hou (Pactera)

HT5675 This update, upon booting, has caused my disk space to fill up and my system freezes up. The same happens to my coworker's computer. We both watch the remaining disk space decrease and the "spinning rainbow appears" and we must restart. What do we

Software Update: Java for OS X 2013-002 1.0
This update, upon booting, has caused my disk space to fill up and my system freezes up. The same happens to my coworker's computer. We both watch the remaining disk space decrease and the "spinning rainbow appears" and we must restart. What do we do?

First, empty the Trash if you haven't already done so.
Use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Proceed further only if the problem hasn't been solved.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
Install ODS in the Applications folder as usual.
Triple-click the line of text below to select it, then copy the selected text to the Clipboard (command-C):sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means.
When you're done with ODS, quit it and also quit Terminal.

Satellite C660-1PH - HDD shows different free space

Hello,
Ive noticed the last days that the 'windows partition C:' of my disk shows different free space without downloading/installing anything
E.g. I had 104GB free, then on next day it was showing 100GB free and then suddenly it became 104GB again. It happened with different values another day, it just keep changing out of the blue.
What could be causing this? Could the hard disk be faulty?
Thank you

Hi
Please dont forget that temporal stored files can change value of the free space on the HDD.
Use the CCLeaner (freeware) software which would delete and remove the temporal stored files.

Activity monitor shows wrong disc space

why does activity monitor shows wrong disc space after delating items still look as if they are there

See:
Where did my Disk Space go?
What are Local Snapshots?

My harddisk info shows more free space as it has capazity

hi everyone,
my harddisk info shows more free space as it has capazity!
Even after using the harddisk-tool to repair rights and catalog
the info below the harddrive shows more GB than it's own size.
This also appears in the info-window (command - i )
749,GB size of HD / 765,16 GB free
But the information about the harddrive shown in the harddrive-repair-tool
seems to be right, and shows approx. 600GB free of the 750GB harddrive ...
I'am a bit worried and are looking for a solution to repair this ...
best, boschma

thx for answering ;-)
yes, I did, under FIRST AID as well ... no positive result
thx for the tipp about 'Disk Warrior'
I will try that - update to follow ...
edit:
oops - that's a lot of money to pay for 'Disk Warrior'.
maybe there are any other utilities? tipps? tricks?
Message was edited by: bosbos

PR CS6 Incorrectly Shows Remaining HD Space

Similar Messages

Maybe you are looking for