PR generated only firm 3 months

Hi Gurus,
I need your advice that how to set up in the system the PR only generated for firm 3 months after MRP run (md01/md02). Fyi, my planning horizon is 100 days. Thanks in advance for your advice.
Best regards,
Mahnansa

>
Mahnansa Nanto wrote:
> Hi,
>
> Thanks for your quick response. I have tried to perform MD02 by using Processing Key NETPL and create PR (1), and change the planning horizon for testing 30(for plant and MRP Group Level), however, system still provide me PR up to January 2010.
>
> Best regards,
>
> Mahnansa
Mahnansa,
I assume that you are current system date is 11/11/2009 and you have assigned the MRP group configured with Planning horizon in the material master of the material.
I would suggest you delete all the PR's created and then try MRP run with NETPL.
Regards,
Prasobh

Similar Messages

Calendar - when I want to edit a monthly recurring event but only for one month I am no longer given the box to update only that date.

Calenndar - when I want to edit a monthly recurring event but only for one month I am no longer given the box to update only that date month. How do I do this with the new operating system?

Adding to Alan's answer:
One of the problems that comes with these tricks for variable-rate acquisition is being able to match up sample data with the time that it was sampled.
If you weren't using either of E-series board's counters, there is a nifty solution to this! You'll be using 1 of the counters to generate the variable-rate sampling clock. You can then use the 2nd counter to perform a buffered period measurement on the output of the 1st counter. This gives you a hw-timed measurement of every sampling interval. You would need to keep track of a cumulative sum of these periods to generate a hw-accurate timestamp value for each sample.
Note: the very first buffered period measurement is the time from starting the 2nd counter until the first active edge from the 1st. For your app, you should ignore it.
-Kevin P.

How to calculate the number of days until your next birthday. Only using current month, day and birth month and day.

I'm trying to calculate the number of days until your next birthday. Only using current month, day and birth month and day. I can get close but i'm way off. When i enter in the next day, the amount of days is supposed to be 364. This is where I am having problems. I know my code is way off. I just need some guidance please!
Attachments:
D5.7_1.vi ‏8 KB

I just had a little fun with the Time Record...
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
D5.7_1_BD.png ‏19 KB

How do I add a new user to my account? But I wanna give him a special product (e.g. InCopy) only for some month...

I am admin and I want to add a new user to my account. But as written above, I want that he/she will get this product only for some month and not for a whole year.
Thanks for the help.

Team license links that may help
-manage your team account http://forums.adobe.com/thread/1460939?tstart=0
-Team Installer http://forums.adobe.com/thread/1363686?tstart=0

I have a Apple imax only about 9 months old. I need a new printer. I am looking at a Canon MX926 PIXMA. Do I have Airprint or do I need to purchase it? I am a novice with Apple and any assistance would be greatly appreciated.

I have a Apple imax only about 9 months old. I need a new printer. I am looking at a Canon MX926 PIXMA. Do I have Airprint or do I need to purchase it? I am a novice with Apple and any assistance would be greatly appreciated.

Welcome to Apple Support Communities
If your iMac is only 9 months old, it probably comes with OS X Mountain Lion, and it includes AirPrint, so you do not need to purchase anything else apart from the printer (which is compatible with AirPrint).
Once you have purchased the printer, you need to follow the steps of the manufacturer. To add the printer to OS X, see > http://support.apple.com/kb/HT4670

It has been only about a month that i bought my macbook pro 15 but it is heating up really fast on the left side even when the cpu usage is only 10%...i'm worried if this is a problem of the hardware.

it has been only about a month that i bought my macbook pro 15 but it is heating up really fast on the left side even when the cpu usage is only 10%...i'm worried if this is a problem of the hardware?

The way something "feels" is very subjective. We would need to know your actual temps. You can install the free iStat Pro widget which is available as a download directly from Apple:
http://www.apple.com/downloads/dashboard/status/istatpro.html
Let us know what CPU temps you're seeing at the time you feel your machine is hot. As you indicated your CPU usage was only 10%, that would imply that you already know that heavy CPU usage would be one cause for your machine to be running on the warm side... but that doesn't seem to be the cause here.

2TB Time Capsule suddenly full after only a few months?

Hello all,
Apologies in advance if this is a question that's already been answered. I've been searching through threads, but didn't seem to see it.
I have a late 2009 iMac (27 inch, 2.8 GHz i7, 4GB Ram) that had a hard drive affected by the Seagate Recall. About the same time I was alerted to this, the Firewire drive I'd been using for timemachine backups reached it's capacity. I figured it was time to get a bigger backup drive and went out and bought a 2TB Time Capsule. This was on November 5th of 2012.
After making a bootabe clone of hard drive (just as a 2nd backup) I set up my time capsule. I did the first backup via ethernet, and then, per posts that I found on the forum,( I set it up so that it was connected to my existing wireless router via ethernet, and let my iMac back up to it wirelessly over the home network. Once or twice, when I've changed large amounts of data, I've reconnected the iMac to the timecapusle via the ethernet cable and let it backup that way. But overall, the backups have happened over the air. My home user folder is aprox 632 GBs.
I also had tried to set up my macbook (Intel, late 2006) to back up to the same timecapsule, but was having issues and ended up just turning time machine off since I haven't had time to trouble shoot them. That macbook (which only has 60 gig harddrive on it) has at least one full backup on it's part of the Time Capsule, but not many more.
So basically my setup looks like this:
Cable Modem connected to Belkin Wireless Router via Ethernet
2TB TC connected to Belkin Router via Ethernet in Bridge mode.
iMac connecting to TC via the wireless network created by router. (with the exception of a few times)
Today, I was surprised that, only a couple months later, that Time Machine told me that the Time Capsule was full, and that it had deleted older backups to make room. My earliest back up is now Dec 6th 2012.
Previously, my 1 TB firewire drive lasted several years before it started having to delete older backups.
Am I right to think this is out of the ordinary? And if it isn't, can anyone point me in the right direction to try and figure out why this is ocurring. I'm not really sure what the first step in trouble shooting the issue would be.
Thanks so much in advance,
avi

Thanks for the quick respons djcastaldo.
I'm not 100% sure what you mean by a "virtual machine"... but I'm guessthing that means I'm not doing it..
I do have about 64 gigs in my dropbox folder... but the day to day changes to the files in there are fairly small (mostly updates to word processing files as I move between computers). I don't think that would be the issue.
Would the best way to try and find the culrprit file be to just scan through my home folder and look for large files with recent "modified" dates?
Thanks so much,
avi

How do I set Mail to only download one-month old emails?

Hello there
I have been a Mac user since 2008 but I have never actually used the default Mail client. I always used third-party applications but since most applications on Yosemite perform really well, I decided to give Mail a shot. The only problem I am facing right now is finding a setting to have Mail only download one-month old emails rather than the whole inbox? I have three accounts (Two on GMAIL and one on Hotmail) and of course they contain thousands and thousands of emails and it will take a very, very long time to download all of them since my internet is pretty slow (2MB), so I was wondering if that option is available? It'd be fantastic. It's available on Android and iOS AFAIK so I assumed maybe it's an option on Mac too?
Thank you for your time.
Regards,
Tarek Elsakka

If you have gmail (Google Mail), one idea is to "label" all the mail you want to in the gmail web interface and then just download mail with a certain label. Take a look at the article at http://gmailblog.blogspot.com/2013/12/download-copy-of-your-gmail-and-google.htm l
Does that help?

Outlook 2003 Free/Busy only shows 2 months for users on Exchange 2010

Hi,
We are moving to Exchange 2010 from Exchange 2003 and have noticed that users who have been created on or migrated to Exchange 2010 who also use Outlook 2003 can only see 2 months worth of free busy information.
After doing some testing this is only an issue if the user who is looking at the free busy is located on Exchange 2010 and they are using Outlook 2003. It doesn't matter if the mailboxes they are looking at are on Exchange 2003 or Exchange 2010.
If the user uses Outlook 2007 they see free/busy past 2 months.
We configure Outlook to publish 12 months of free/busy.
Any help would be appreciated.
Regards
Matt

Hi Matt,
According to your description, the issue only happens in Outlook 2003 but not in other Outlook versions. Please check whether there is the Auto Accept Agent installed in your Exchange server. This issue occurs when you register the Auto Accept Agent to process
meeting requests for the affected mailbox.
Here is a KB related to this issue. Please follow it to configure the period for which you want to publish Free/Busy information in a registry entry on the Microsoft Exchange Server on which you have installed the Auto Accept Agent:
The published Free/Busy information for a mailbox is displayed for the default period of two months after you have configured a longer period in Outlook
http://support.microsoft.com/kb/917687
The free/busy publish range reverts back to the default setting when you direct book a resource in Outlook 2003
http://support.microsoft.com/kb/905817
Additionally, I recommend you upgrade your Outlook 2003 clients to Outlook 2010/2013 for better working. Because Microsoft ended support for Office 2003 on April 8, 2014.
Regards,
Winnie Liang
TechNet Community Support

Is table maintenance generator only for custom table?

hi ,
i have doubt is table maintenance generator only for custom table?

hi swamya,
Table Maintanance Generator is used to create/change/delete table entries in a particular table.
In the production system, end-users will not be having access to transaction codes like SE11 and SE16. Developers will not be having access to many transaction codes including the above two.To view the contents of the database table, we will use SE16n in Production system. All these authorizations will be maintained by BASIS team, by creating access profiles.So in order to edit or create the contents of a database table, we should go for table maintenance generator. In real time, authorizations will be maintained in production system.
The second reason is, we can edit or create multiple entries at a time, using tablemaintenance generator.
Apart from that we have options like 'Enter conditions' in table maintenance screen SM30.
hope this helps in clearing ur doubt.
Regards
Saurabh

Need skype no. only for 1 month

hi,
is that possible to have skype no only for 1 month?

Hi Dave828,
Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you. Please go to your profile page for the forum and look at the top of the middle column where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under "My Support Cases" you will find a link to the private board where you and the agent may exchange information. The title of your post is the link. This should be checked on a frequent basis, as the agent may be waiting for information from you before they can proceed with any actions. To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe". Please keep all correspondence regarding your issue in the private support portal.

EEM script that generates only 1 email when a fxs port is offhook.

Using the below config I am able to receive a email anytime my voice port is in any other state than ON HOOK. The problem I have is the script runs every 30 seconds and I receive an email every 30 seconds the line is in any other state than "ON-HOOK".
Is there a way to have only one email generated ONLY when the state changes from the previous state?
example : the line is on-hook, changes to off-hook or park or whatever- a email would be generated. ( only One email). not one every 30 seconds...
The line goes from Off-Hook back to IDLE. - A email would be generated to advise the line has been restored to a IDLE state.
I know what you're thinking why? Well I was thinking of using the analog ports as kind of a poor man's slightly intelligent surveillance system. If port 1/0/0 goes off hook or shorted, then this is an alarm condition. A email would be generated. I just don't need a email every 30 seconds.
scheduler allocate 20000 1000
event manager environment _email_from [email protected]
event manager environment _email_to email [email protected]
event manager environment _email_server smtp-server.isp.net
event manager applet check_1/0/0_if_NOT_ONHOOK
event timer watchdog time 30
action 001 cli command "enable"
action 002 cli command "show voice port summ | include 1/0/0"
action 003 foreach line "$_cli_result" "\n"
action 004 regexp "on-hook" "$line"
action 005 if $_regexp_result eq "1"
action 006 exit 0
action 007 end
action 008 end
action 009 syslog msg "PORT_1_is_in_any_other_state_then_on-HooK!"
action 1.0 mail server "$_email_server" to "$_email_to" from "$_email_from" subject "$_event_pub_time:Test EEM port 1/0/0 is SHORTED ie IN ALARM" body "TEST Body"
end
Any ideas?

Look at EEM context to save the value of a variable across policy runs. So you could retrieve the value of the context and compare it to the current value, if they are different then send an email and if they are the same then no action.
http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/eem/command/eem-cr-book/eem-cr-a1.html#wp2399063000
The first time your updated policy runs and executes the context retrieve there will not be a value since you have to do a context save first. To get around this make a second policy that runs at reboot to do a context save of the "on-hook" state.

At the momment i only pay a month to month after effects subscription for $29usd i am a video editor and only use After effects, premier, photoshop and Illustrator whats my best option, do i upgrade, cancel. what todo?

At the momment i only pay a month to month after effects subscription for $29usd i am a video editor and only use After effects, premier, photoshop and Illustrator whats my best option, do i upgrade, cancel. what todo?

You can upgrade to full CC, please check for the options & price here.
Creative Cloud pricing and membership plans | Adobe Creative Cloud
Cloud-based creative software and services | Adobe Creative Cloud
How to upgrade from a single app membership to complete Creative Cloud
Manage your membership and payments | Creative Cloud
Please let us know if you have any further queries.
Regards
Rajshree

Can I use my Ipad 3 with Verizon Wireless only on a month to month basis as needed?

Verizon wants to bind me to an ongoing contract for my Ipad 3. I understood when I bought it from Apple.com 2 years ago that it could be on Verizon's data plan on an as needed monthly charge. It would not be an ongoing charge. Then I would only pay a monthly charge of $10 for the months that I was signed into their data network. I could sign in and out of the network as I needed to. I will only use the Ipad on Verizons network 2 to 3 weeks per year when I'm on vacation and away from my home wi-fi, (I have a different home provider for wi fi at home). I have only had it activated on my Verizon account one time a couple of months ago. I called a month ago to cancel my data service for the Ipad only, not my phones. Since then, I have received emails say that they will continue to bill me. Is Verizon just trying to........? (Be Verizon).

Re: Airplay. This is currently up to the developers to implement so it has nothing to do with Apple. Hulu have decided against it for legal reasons.
IOS 5 will bring airplay mirroring with iPad 2 but will have to wait and see to test. It isn't out until the 12th.
Airplay will work with the Macbook but only through iTunes

TS1702 Have Tom Tom on My iphone 4, paid for "Traffic HD" for 12 months but only got 1 month .

I've tried restoring purchases from with the TomTom app on my I phone but it thinks I only have 1 month subscription to Traffic HD"
Any help would greatly appreciated.

Contact iTunes support:
https://www.apple.com/support/itunes/

PR generated only firm 3 months

Similar Messages

Maybe you are looking for