Prasad Reddy

Hi Experts,
I am working on userexit_save_document_prepare strucked up with the condition please give me suggestion.
My condition is to save the sales order:
Light Check:
In creation mode (T180-TRTYP = 'H'),
If the country of the sales organization is different from the country of the ship -to
(header or line level) and both countries belong to same country group then
Light Check = NO (no further processing)
If the country of the sales organization is different from the country of the ship -to
(header or line level) and they do NOT belong to the same country group, then
Light Check = Yes
In creation mode (T180-TRTYP = 'H'),
If the country of the sales organization and at least ONE ship-to country (header or
line) do NOT belong to the same country group, then Light Check = Yes
In 1st Case satisfies no further action should be done and sales oder should be save.
In 2nd Case satisfies then the Error Message Should be riase and sales order should not be save.
                 In FS I don't get the fieldnames and Table name for reference. And also am not sure about how to get the country group here for the same.
                 The Sales Organization Table(TVK0) don't have the Country field and the Ship-to Table have LAND1 in such case how we will get the country of the sales organization and Country group.
                 Please suggest me ASAP.
Thanks in Advance,
Prasad Reddy.

Hi Dave,
The business will 'mess up' the ZE partner function in change
mode. Nonetheless every time a new export compliancy check will be triggered
the ZE partner will be checked. It is up to the Change management people to
inform the business about this new check.
Need to check the Sales Org of US01 and CA01. Sales Org, Start Date and Sales Doc against to VBAK and ZSVKORG. Instead of TVARVC table they maintain this table for maintaining entries for feature reference.
So now question is after checking the above condition need to check the Light Check also PARVW ne ZE.
1. When the both country sales org is different from the country ship-to then both counties belongs to same country group no need to check the condition.
2. When the both country sales org is different from the country ship-to then they do NOT belongs to same country group no need to check the condition.
Please Suggest me.
Thanks in Advance,
Prasad.

Similar Messages

HTTP Error 403.16 - Forbidden, Your client certificate is either not trusted or is invalid.

Dear Experts,
I have tried mutual authentication with sample website as per below link:
http://itq.nl/testing-with-client-certificate-authentication-in-a-development-environment-on-iis-8-5/#comment-19427
1. Created a Root certificate, client and server certificate based on this root certificate by using Makecert command as per below link:
2. Import these certificates in Trusted Root Certification authority of both the stores (Local and Current user)
3. Created a sample website with HTML page
4.Hosted this website in IIS with HTTPS binding and selected the above server certifcate
5. Enabled "Require SSL" and selected "Require" under SSL settings of website
6. Exported the client certificate in base64 format --> Edited in notepad --> made the key into single line
7. Placed the above key under Configuration editor --> system.webServer/security/authentication/iisClientCertificateMappingAuthentication --> one to one mapping with user credentials.
8. I tried to access the website
But, I ended with below error :(
HTTP Error 403.16 - Forbidden
Your client certificate is either not trusted or is invalid.
Detailed Error Information:
Module    IIS Web Core
Notification    BeginRequest
Handler    ExtensionlessUrlHandler-Integrated-4.0
Error Code    0x800b0109
Requested URL    https://localhost:443/
Physical Path    E:\SampleRoot
Logon Method    Not yet determined
Logon User    Not yet determined
Could you please let me know what I missed here.
Note:
I am using windows8, IIS8.0.
Thanks in advance.
Regards,
M. Prasad Reddy.

Hi Prasad,
As per this case, I have been shared the corresponding details below
1.First of all,make sure that you import the certificate whether it belongs to Trusted RootCertification or not .
    If that is the case ,Goto Microsoft Management Console (MMC), open the Certificates snap-in.
    For instance, the certificate store that WCF is configured to retrieve X.509 certificates from, select the Trusted RootCertification Authoritiesfolder. Under the Trusted Root Certification Authorities folder, right-click the Certificatesfolder,
point to All Tasks, and then click Import.
2.you configured the server certificate as well, But check the client certificate whether have root certificate or not by following command?
makecert -pe -n "CN=SSLClientAuthClient"
         -eku 1.3.6.1.5.5.7.3.2 -is root -ir localmachine -in WebSSLTestRoot
         -ss my -sr currentuser -len 2048
3. Also check the Service Certificate whether its configured on the WCF Service side
4.Make sure that you followed all the steps are done correctly from your given referred link below
http://itq.nl/testing-with-client-certificate-authentication-in-a-development-environment-on-iis-8-5/#comment-19427
5.Besides, please try to set the require SSL as ignore to see if you can access the website.
If the above details cannot able to resolve this issue, please post your config file here.

How can we remove an unwanted # in sales order texts created using a bapiFM

Hi,
i've written the following code which splits the record fetched from apllication server and moves it into a workarea.
CONSTANTS:c_sep VALUE cl_abap_char_utilities=>horizontal_tab, "for separation
SPLIT wa_tab1-rec1 AT c_sep INTO wa_inf_itm-inf_vbeln
                                       wa_inf_itm-itm_number
                                       wa_inf_itm-material
                                       wa_inf_itm-req_qty
                                       wa_inf_itm-uom
                                       wa_inf_itm-amount_pr00
                                       wa_inf_itm-amount_pi02
                                       wa_inf_itm-amount_mwst
                                       wa_inf_itm-amount_vprs
                                       wa_inf_itm-currency
                                       wa_inf_itm-text.
Here c_sep will have a value '#' instead of 'space' in Flatfile from application server.
The field 'wa_inf_itm-text' though it doesnot contain any value in debugging, when the sales order is created using FM 'BAPI_SALESORDER_CREATE_FROM_DAT2' the item texts are having a # character at the end of the text if it has any text(when checked in va03--sales order item text) or if it doesnot contain any text ,then also # character is seen in texts.
Thanks & Regards,
Prasad Reddy.

hi
use
Replace all occurrence of '#' with space from .......
I think it will solve ur problem.
Rewards with point if helpful.
Regards
Santosh.

Creating BADI for datasource enhancement in CRM.

Hi,
I am working on SAP BI/BW. This is the first time I am working in CRM system with CRM datasources. Facing some problem for datasource enhancement as never done it before in the CRM system. Is there anyone who can help in in creating BADI for datasource enhancement in CRM.
Thanks in advance
Moumita

Hi Prasad Reddy,
This are the available badis and exits for this t.code:
Enhancement/ Business Add-in            Description
Enhancement
MGA00001                                Material Master (Industry): Checks and Enhancements
MGA00002                                Material Master (Industry): Number Assignment
MGA00003                                Material Master (Industry and Retail): Number Display
Business Add-in
MG_MASS_NEWSEG                          User-Specific Fields & Segments in Mass Maintenance
MATGRP_SKU_UPD
CDT_CHECK_MATERIAL                      Checks for Existence of a Material in a CDT
BADI_MM_MATNR
BADI_MAT_F_SPEC_SEL                     BAdI for Material Special Field Selection
BADI_MATNR_CHECK_PVS
BADI_MATERIAL_REF                       Addition of customer-defined default data for material
BADI_MATERIAL_OD
BADI_MATERIAL_CHECK                     Enhanced checks for material master table
BADI_GTIN_VARIANT
BADI_EAN_SYSTEMATIC
o.of Exits:          3
o.of BADis:         11
Find the Exact exits and badis for ur requirement.
How to fine the exact badi:
1) Goto se24 (Display class cl_exithandler)
2) Double click on the method GET_INSTANCE.
3) Put a break point at Line no.25 (CASE sy-subrc).
Now
4) Execute SAP standard transaction
5) Press the required button for which you need to write an exit logic, the execution will stop at the break point.
6) Check the values of variable 'exit_name', it will give you the BADI name called at that time.
7) This way you will find all the BADIs called on click of any button in any
transaction
Rgds,
P.Naganjana Reddy
if you follow this 7 steps, you will find a suitable BADI.

FM for sending itab data to excel sheet

Hi,
Can any one tell FM for sending internal table data to excel.
Thanks & Regards,
Prasad reddy.

Hi,
If you want open Internal Table data in Excel automatically, try this FM: EXCEL_OLE_STANDARD_DAT.
Here the sample program:
REPORT ZTEST .
TABLES: USR03,DD02L.
DATA: ZX030L LIKE X030L.
DATA BEGIN OF ZDFIES OCCURS 0.
INCLUDE STRUCTURE DFIES.
DATA END OF ZDFIES.
DATA: BEGIN OF FLDITAB OCCURS 0,
FLDNAME(11) TYPE C,
END OF FLDITAB.
DATA ITABUSR03 LIKE USR03 OCCURS 0 WITH HEADER LINE.
DATA TNAME LIKE DD02L-TABNAME.
SELECT * FROM USR03 INTO TABLE ITABUSR03.
TNAME = 'USR03'.
PERFORM GETFIELEDS.
PERFORM SHOW123.
FORM GETFIELEDS.
CALL FUNCTION 'GET_FIELDTAB'
    EXPORTING
      LANGU = SY-LANGU
      ONLY = SPACE
      TABNAME = TNAME
      WITHTEXT = 'X' IMPORTING
      HEADER = ZX030L
    TABLES
      FIELDTAB = ZDFIES
    EXCEPTIONS
      INTERNAL_ERROR = 01
      NO_TEXTS_FOUND = 02
      TABLE_HAS_NO_FIELDS = 03
      TABLE_NOT_ACTIV = 04.
CASE SY-SUBRC.
    WHEN 0.
      LOOP AT ZDFIES.
      FLDITAB-FLDNAME = ZDFIES-FIELDNAME.
      APPEND FLDITAB.
      ENDLOOP.
    WHEN OTHERS.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
      with SY-SUBRC.
ENDCASE.
ENDFORM.
FORM SHOW123.
CALL FUNCTION 'EXCEL_OLE_STANDARD_DAT'
    EXPORTING
      FILE_NAME = 'C:USR03'
      DATA_SHEET_NAME = 'USER LIST'
    TABLES
      DATA_TAB = ITABUSR03
      FIELDNAMES = FLDITAB
    EXCEPTIONS
      FILE_NOT_EXIST = 1
      FILENAME_EXPECTED = 2
      COMMUNICATION_ERROR = 3
      OLE_OBJECT_METHOD_ERROR = 4
      OLE_OBJECT_PROPERTY_ERROR = 5
      INVALID_FILENAME = 6
      INVALID_PIVOT_FIELDS = 7
      DOWNLOAD_PROBLEM = 8
      OTHERS = 9.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
Regards,

ABAP Objects-attribute accessability issue

Hi,
Let me introduce the problem.
I have a class c1 which has a public attribute a1.
a1 is of table type which refers to a class c2. c2 has an attribute a2 which is public.
With the object o1 of class c1 I need to access a2.
Please help me solve the problem.
Regards,
Ravi
Message was edited by: Ravi Prasad Reddy L

HI,
Check the below code....
Hope it solves your purpose.
class b definition deferred.
class a definition.
public section.
    data : obj2 type ref to b.
    methods : write_data.
endclass.
class b definition.
public section.
    data : v_num type i.
      methods : assign_value.
endclass.
class a implementation.
method write_data.
    create object obj2.
    call method obj2->assign_value.
    write:/1 'Hello Everybody'.
endmethod.
endclass.
class b implementation.
method assign_value.
    v_num = 100.
endmethod.
endclass.
data : obj1 type ref to a.
start-of-selection.
create object obj1.
call method obj1->write_data.
write:/1 obj1->obj2->v_num.
Regards,
Vara

Enhance the Time Dependent Tab of the Asset Master AS01

Hi,
My requirement is to enhance the Asset Master Client dependent Tab transaction AS01.
I have added a field in the ANLZ through some Append Structure.
And added that field in the Custom Screen.
After doing the functional config that field is visible.
In the Time dependent tab, when we press MORE INTERVEL PUSH BUTTON A new screen appear with certain fields which already present in the Time dependent tab.
Now my question is: How I can insert the new enhanced field in that and how we can save the data in ANLZ table.
We are using ECC 5.0 version, requirement is to add some fields similler to ECC 6.0 version in time dependent tab of AS01 transaction.
Thanks in Advance,
Hari
Edited by: Hari prasad REDDY 123 on Dec 17, 2009 2:52 PM

Hi hari,
Was this problem solved ? Wuld be great if you could le me know the solution .
Thanks!!

Crosstab Header Labels - Can they be merged?

I have a crosstab report and I would like to be able to put one label above the dynamic columns. If there was a way to merge the header cells above
Since this report will always have the same number of dynamic columns, I tried putting a cell on the report that is as wide as the total of the dynamic columns. That works fine - until somebody decides to add a dimension down the left side.
I'm not sure if it's even possible but if anybody knows of a work-around that would help me, I would apprecaite any ideas and/or suggestions.
Thanks.
Ron

Hi Ron
I have Done the following thing
1.create variable
=Sum([measure]) ForAll ([Dimension];[Dimension])
2.if you want each
=Sum([Dimension]) ForEach ([Dimension])
for example
i have taken 2 dimension i.e Category,Year and 1 measure SalesRevune(here year i have taken header in Crosstab)
for this i have taken variable like this
=Sum([Sales revenue]) ForAll ([Category];[Year])
if you have any doubt or any additional requirement please let me know
Thanks
Prasad
Edited by: S R Prasad Reddy on Jul 29, 2011 1:43 PM

Editable records in list output.

dear gurus,
i have a small query regarding lists.
how can we make the list output entries editable and once i edit a field it has to be updated in the internal table and a new list should be shown with the changes made in the list.
any sort of help is higly appreciated.
Message was edited by:
        vara prasad reddy sanam

Here is the simple example...
REPORT demo_list_format_input.
WRITE   'Please fill in your name before printing:'.
WRITE / '   Enter name here    ' INPUT ON.
ULINE.
WRITE 'You can overwrite the following line:'.
FORMAT INPUT ON INTENSIFIED OFF.
ULINE.
FORMAT INPUT OFF INTENSIFIED ON.
Thanks,
Santosh

Transporting module pool program from sand dev to dev system

Hi,
Can any body tell me how to transport module pool objects(including screens) from sand dev to dev system rather than manually with in the same client.
regards,
prasad reddy.

Hi
Go to Screen painter and give your program name which you wanted to transport.
Go to --> Object directory entry and there enter Development class and press enter then it will ask for request,. create a request accordingly.
Then you can release the sub task and give the main request to your Basis person to move it to target system.
Regads
Suresh

Unable to start services on Weblogic server

When I am trying to start managed server or any additional services I am getting following error,
Please may I know why this error is showing and what would be the solution.
For server vijay_webcenter, the Node Manager associated with machine Machine-0 is not reachable.
All of the servers selected are currently in a state which is incompatible with this operation or are not associated with a running Node Manager or you are not authorized to perform the action requested. No action will be performed.

Hi,
you need to start the node manager service before to start the managed server. if you start the managed server without node manager check whether the MSI mode is enabled or not.
Regards,
Siva Prasad Reddy
[email protected]
9550887963

JMS Bridge status

Hi,
I am trying to find out the bridge status using the below wlst script. But failed to execute it.
Please help me.
connect(weblogic,'weblogic','t3://localhost:7001')
servers = domainRuntimeService.getServerRuntimes();
if (len(servers) > 0):
     for server in servers:
     messagingBridgeRuntime = server.getMessagingBridgeRuntime;
          messageBridges = messageBrigdeRuntime.getMessageBridges();
          for messageBridge in messageBridges:
               destinations = messageBridges.getDestinations();
               for destination in destinations:
                    print ' BridgeName          ' , destination.getName()
                    print ' State ' , destination.getState()

Hi Dongbo,
Even i am also facing the same issue. when i checked the serverRuntime(), i am unable to find the MessagingBridgeRuntime. Please find the below serverRuntime() when i executed it.
wls:/sampledomain/serverConfig> serverRuntime()
Location changed to serverRuntime tree. This is a read-only tree with ServerRuntimeMBean as the root.
For more help, use help(serverRuntime)
wls:/sampledomain/serverRuntime> ls()
dr-- ApplicationRuntimes
dr-- ClusterRuntime
dr-- ConnectorServiceRuntime
dr-- DefaultExecuteQueueRuntime
dr-- EntityCacheCumulativeRuntime
dr-- EntityCacheCurrentStateRuntime
dr-- EntityCacheHistoricalRuntime
dr-- ExecuteQueueRuntimes
dr-- JDBCServiceRuntime
dr-- JMSRuntime
dr-- JTARuntime
dr-- JVMRuntime
dr-- JoltRuntime
dr-- LibraryRuntimes
dr-- LogBroadcasterRuntime
dr-- LogRuntime
dr-- MANReplicationRuntime
dr-- MailSessionRuntimes
dr-- MaxThreadsConstraintRuntimes
dr-- MinThreadsConstraintRuntimes
dr-- PathServiceRuntime
dr-- PersistentStoreRuntimes
dr-- RequestClassRuntimes
dr-- SAFRuntime
dr-- ServerChannelRuntimes
dr-- ServerSecurityRuntime
dr-- ServerServices
dr-- ThreadPoolRuntime
dr-- TimerRuntime
dr-- WANReplicationRuntime
dr-- WLDFRuntime
dr-- WLECConnectionServiceRuntime
dr-- WTCRuntime
dr-- WebServerRuntimes
dr-- WorkManagerRuntimes
But in serverConfig(), i found the MessageBridges. Please find the below serverConfig() when i executed it.
wls:/sampledomain/serverConfig> ls()
dr-- AppDeployments
dr-- BridgeDestinations
dr-- Clusters
dr-- CustomResources
dr-- DeploymentConfiguration
dr-- Deployments
dr-- EmbeddedLDAP
dr-- ErrorHandlings
dr-- FileStores
dr-- InternalAppDeployments
dr-- InternalLibraries
dr-- JDBCDataSourceFactories
dr-- JDBCStores
dr-- JDBCSystemResources
dr-- JMSBridgeDestinations
dr-- JMSInteropModules
dr-- JMSServers
dr-- JMSSystemResources
dr-- JMX
dr-- JTA
dr-- JoltConnectionPools
dr-- Libraries
dr-- Log
dr-- LogFilters
dr-- Machines
dr-- MailSessions
dr--   MessagingBridges
dr-- RemoteSAFContexts
dr-- SAFAgents
dr-- SNMPAgent
dr-- Security
dr-- SecurityConfiguration
dr-- SelfTuning
dr-- Servers
dr-- ShutdownClasses
dr-- SingletonServices
dr-- StartupClasses
dr-- SystemResources
dr-- Targets
dr-- VirtualHosts
dr-- WLDFSystemResources
dr-- WLECConnectionPools
dr-- WSReliableDeliveryPolicies
dr-- WTCServers
dr-- WebAppContainer
dr-- WebserviceSecurities
dr-- XMLEntityCaches
dr-- XMLRegistries
wls:/sampledomain/serverConfig> cd('MessagingBridges')
wls:/sampledomain/serverConfig/MessagingBridges> ls()
dr--   com.jms.bridge.sample.in
wls:/sampledomain/serverConfig/MessagingBridges> cd('com.jms.bridge.sample.in')
wls:/sampledomain/serverConfig/MessagingBridges/com.jms.bridge.sample.in> ls()
dr-- SourceDestination
dr-- TargetDestination
dr-- Targets
-r-- AsyncEnabled true
-r-- BatchInterval -1
-r-- BatchSize 10
-r-- DeploymentOrder 1000
-r-- DurabilityEnabled true
-r-- IdleTimeMaximum 60
-r-- Name com.jms.bridge.sample.in
-r-- Notes null
-r-- PreserveMsgProperty true
-r-- QOSDegradationAllowed true
-r-- QualityOfService Exactly-once
-r-- ReconnectDelayIncrease 5
-r-- ReconnectDelayMaximum 60
-r-- ReconnectDelayMinimum 15
-r-- Selector
-r-- Started true
-r-- TransactionTimeout 30
-r-- Type MessagingBridge
-r-x freezeCurrentValue Void : String(attributeName)
-r-x isSet Boolean : String(propertyName)
-r-x unSet Void : String(propertyName)
wls:/sampledomain/serverConfig/MessagingBridges/com.jms.bridge.sample.in>
wls:/sampledomain/serverConfig/MessagingBridges/com.jms.bridge.sample.in> cmo.getName()
*'com.jms.bridge.sample.in'*
wls:/sampledomain/serverConfig/MessagingBridges/com.jms.bridge.sample.in> cmo.getType()
*'MessagingBridge'*
wls:/sampledomain/serverConfig/MessagingBridges/com.jms.bridge.sample.in> cmo.getState()
Traceback (innermost last):
File "<console>", line 1, in ?
AttributeError: getState
Using the MessagingBridges i am able to find the name of the bridge and its type except the state as shown above.
I need to find the bridge status through the WLST script only. Let me know is there any possibility in this.
Regards,
Siva Prasad Reddy
+91 9550887963

Anychart bullet graph

Hi,
anychart bullet graph [http://www.anychart.com/products/anychart/gallery/samples/Horizontal-Linear-Gauge-Bullet-Graph-Demo.html]
does not come with the apex version of anychart
it's basically a bar chart but with different possible scales
I am wondering whether anyone has implemented a free alternative to this
even html5 might be an option
used versions :
APEX 4.1.1.00.23, anychart 5.1.3 that came with it
Kr
Martin

Hi
generally you have Horizontal Bullet Chart component in Xcelsius then why u are go for technique,i didn,t get the meaning of As i understand it two comparative measures is not supported for 4.0 or 4.1.
Regards
Prasad
Edited by: S R Prasad Reddy on Aug 24, 2011 5:06 PM

How to Modify Weblogic's Admin Console Login?

Hi all,
I am working with Weblogic Server 8.1. I would like to take weblogic's current
administration console ( ../console/LoginForm.jsp) and make some modifications.
Mostly, I would like to access LoginForm.jsp. Where exactly is this file located?
I can find the console.war file, but the LoginForm.jsp is not there. I can't find
the files I need to modify. Where can I find files to modify the administration
console/login?
You help is appreciated, thanks!

Hi Shailesh Dyade,
Try to execute the following script after executing the startup script (startWeblogic.cmd or startWeblogic.sh).
connect("username","password","t3://hostname:portnumber")
edit()
startEdit()
cmo.setConsoleEnabled(true)
save()
activate()
disconnect()
exit()
once execute the above script then restart the server & try to access the console using the URL
Thanks & Regards,
Siva Prasad Reddy
[email protected]
9550887963

Hi this is Krishna Prasad,completed ABAP training,and i need some suggestin

Hi,
I completed my course on ABAP, and in search of job on ABAP,
can anyone tell me the books required to prepare and the main objects to be known.
if u people have any material please forward to my maild id,[email protected]
Thanks,
Krishna Prasad.

No way related to this thread......Automatic infotech hiring freshers......but they take some hefty amount frm u...(job guarantee 0%).. 1st batch of freshers is still goin on.....

Prasad Reddy

Similar Messages

Maybe you are looking for