Premier elements 8 installation issues

I have tried to load Premiere elements 8 on a new HP laptop with a 2.1. After speaking with ADOBE, they said that it requires a 3.0GHZ preocessor or higher.
A message keeps returning that "audio only loaded"
IS there a way to install it so the HD function is not loaded and therefore does not require a faster processor than a 2.0GHZ processor?

And even a 3.0 ghz Pentium would be pretty low end -- especially if you plan to edit hi-def video.
I'd recommend at least a dual-core 2.8 ghz with 4 gigs of RAM or, even better, a quad core processor or i7. This version of the program really does demand lots of power, RAM and hard drive space in order to work.

Similar Messages

  • Premier Elements Trial Installation goes into oblivion

    Windows 7 64 bit 16 GB memory /  Premier Elements Trial Installation goes off into oblivion
    I started the installer, ready privacy policy (sort of), chose English, clicked Install. Installer disappears from the screen and the harddrive winks madly for about a half hour. Don't see the program in control panel or installed programs. Re-downloaded, same results.
    I've had no installation issues with any other SW including Lightroom 3 and Photoshop CS4. What the heck is going on here? - Help appreciated, IM

    Troubleshooting installation issues can be a daunting task. Also, most of us on the forum have not had installation issues, so we can only go by what we have read, that has worked for others - little, to no, direct experiences.
    Usually, a failure to install is specific to certain aspects, and settings on a particular computer - after one follows the very general guidelines.
    If there is a product that is installing and working, that would be a good reason to go with that one, even though it is not from Adobe. Though I have been a big Adobe fan for decades, I still rely on some other programs, that do things that my Adobe suites do not do, or do not do as well. No shame in having a full "toolbox," for when you need something else.
    I understand your frustration, and wish that I had some easy "fixes," but after the guidelines in that linked article, things do get very involved.
    Good luck, and happy editing,
    Hunt

  • Adobe Premier Element 8 installation problem

    We recently upgraded our computer from Windows Vista 32-bit to Windows 7 64-bit.  In order to do this we had to reinstall the whole OS and we lost all of our applications.  We have a license for Adobe Photoshop Elements 8 and Adobe Premiere Elements 8.  We were successful at installing Adobe Photoshop Elements 8, but when we tried to install the Adobe Premiere Elements 8, it gave us the following error: "Either Adobe Premiere Elements 8.0 is not installed on the system or has corrupted.  So please install Adobe Premier Elements 8.0 and then retry.".  It appears as though the installer thinks it should be performing an upgade.  Any ideas?

    Could be a simple compatibility issue. not sure if PSE/PPE 8 is even qualified for Win 7. Try to run the installer in one of the compatibility modes.
    Mylenium

  • Adobe Premier Elements 10 installation

    Hi there I have purchaced a copy of Photoshop Elements 10, this comes with a trial version of Premier Elements which won't install.
    After trying to install it each time I get the error message:
    Please restart the computer and try again.
    Exit Code: 7
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 8 error(s), 7 warning(s)
    WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {FEA75AFB-4905-43BB-B1D5-5B44D681BFE7} Camera Profiles Installer_6.4_AdobeCameraRawProfile6.0All 6.4.0.0 will be uninstalled now.
    WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {FEA75AFB-4905-43BB-B1D5-5B44D681BFE7} Camera Profiles Installer_6.4_AdobeCameraRawProfile6.0All 6.4.0.0 will be uninstalled now.
    ----------- Payload: {68FE2517-2E45-4B03-8241-D0634F43878B} Smartsound1 1.0.0.0 -----------
    ERROR: DW006: Apple Package failed to install successfully.
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Smartsound3: Install failed
    ERROR: DW050:  - Photoshop Camera Raw for Elements 10: Install failed
    ERROR: DW050:  - Smartsound1: Install failed
    ERROR: DW050:  - Adobe Premiere Elements 10: Failed due to Language Pack installation failure
    ERROR: DW050:  - Adobe Premiere Elements 10_LangPacken_US: Install failed
    ERROR: DW050:  - Smartsound2: Install failed
    I am using an IMac OSX Lion 2.4 Quad Core
    Help Please
    Chris

    Stillgrizzling please refer to Updated installation instructions | Premiere Elements 10 | Mac OS for information on how to solve your difficulties.

  • Elements 11 and Premier Elements 11 installation

    I intend to install elements 11 and premier elements 11 as replacements for older versions.  Should I install elements (with it's organizer) first ? Or does it matter?

    When you install either of PSE or PRE, organizer is installed along with. You can have older versions along with the new ones. They all would work individually as well.

  • Adobe Premier Elements 12 Installation fail at Shared Technologies

    Install continually fairls at shared technologies installation.. use of adobe support adviser did not find any issues... installed in bundle with photoshop elements and neither editing software works but the organizer works...any ideas? Oh and all installation attempts with adobe application manager fail almost instantly too! On windows 7 64 bit

    Twizzler360
    That shared technologies issue has a long history with variable fixes. What works for some does not for another. It hits various versions of Premiere Elements and different computer operating systems.
    This long thread will get you an idea of the history and home remedies.
    http://forums.adobe.com/message/4950564
    What worked for me was installation disc with an external DVD burner and USB 3 computer port for Photoshop Elements 10/Premiere Elements 10 and Photoshop Elements 11/Premiere Elements 11 on Windows 8 64 bit.
    You can review the different approaches. But, I suspect that the key is to keep trying. Deactivate (if you got that far), uninstall, ccleaner run through, reinstall. Just when you are about ready to give up, it installs. (very non technical view).
    Please let us know the outcome.
    Thanks.
    ATR

  • Photoshop Elements 10 installation issues

    I had Elements 9 and just purchased elements 10. I tried to install it and have had not luck. I have called the help desk several times with no luck. I also have Lightroom and use to be able to right click on a picture and edit it in Photoshop elements 9, now it says it will be edited in elements 10, but it does not do anything. I can't figure out how to get it back the way it was. I have tried to uplaod the trial version, the software from the CD I bought, but nothing seems to work. anyone have any suggestions for this?

    For such a complex issue it might be best to continue to work with our support team as they can work with you on an individual basis to resolve your difficulties.  If you would like we do have a support document, "Troubleshoot installation problems | Photoshop Elements, Premiere Elements | Windows" with steps you can certainly use.
    Alternately you can also review your install log files to try to determine the exact error which is causing your difficulties.  "Troubleshoot install using logs | Premiere Elements, Photoshop Elements," details how to review the logs which are created when your computer installs Photoshop Elements 10.

  • Element 3D installation issues

    I'm having error codes with installing Element 3D 1.6 and the Metropolitan Pack to After Effects CC 12.
    Element 3D was installed and was running fine until I uninstalled AE CC v12 and upgraded to CC 2014 (v13), however Element 3D wasn't installing into CC 2014. So I reinstalled AE CC v12 and now getting two Error Codes.
    Error Code: 64
    and
    Error Code: 1020
    Can anyone help me with this matter? I would like to solve the issue quickly.
    Thank you
    Giorgi Apysisuri
    homepage: http://run-3.com

    Ask in the Element 3D forum on Video CoPilot. also start by downloading the actual CC-enabled E3D installer.
    Mylenium

  • Photoshop Elements/Premiere10 Installation Issue

    I received my Adobe Photoshop Elements10/Premiere Elements10 (for Mac) today.  I have followed the prompts and instructions, trying multiple times to install the software; however, I continue to get the error messages below.  What do I need to do to be able to install/use my new software?
    Thank you!
    Exit Code: 7
    -------------------------------------- Summary --------------------------------------
      - 0 fatal error(s), 9 error(s), 8 warning(s)
    WARNING: DS013: Payload {75063C76-E858-455B-9C26-89E55D26F276} AdobeHelp 3.2.0.0 is already installed and the session payload {EB3A47AA-B4E2-4857-A69C-92A6E097F24C} AdobeHelp 3.5.0.0 has no upgrade/conflict relationship with it.
    ERROR: DS013: Verifying payload integrity : Failed with code 1
    WARNING: DW034: Warning: {3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 will not be repaired, due to updated patch of the payload and one of the top level payload is being installed.
    WARNING: DW034: Warning: {3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 will not be repaired, due to updated patch of the payload and one of the top level payload is being installed.
    ----------- Payload: {68FE2517-2E45-4B03-8241-D0634F43878B} Smartsound1 1.0.0.0 -----------
    ERROR: DW006: Apple Package failed to install successfully.
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Smartsound3: Install failed
    ERROR: DW050:  - Photoshop Camera Raw for Elements 10: Install failed
    ERROR: DW050:  - Smartsound1: Install failed
    ERROR: DW050:  - Adobe Premiere Elements 10: Failed due to Language Pack installation failure
    ERROR: DW050:  - Adobe Premiere Elements 10_LangPacken_US: Install failed
    ERROR: DW050:  - Smartsound2: Install failed

    Please follow the procedure in Updated installation instructions | Premiere Elements 10 | Mac OS for a solution.

  • Premier elements 13 codec issue

    When I try to play a video I get the error, "The selected file cannot be played because your system does not have the required compresser/decompresser(codec) installed."  How can I get it to work?

    moziator
    Preliminary Findings....
    I have download your .m2ts file to my Windows 7 64 bit computer, and my Elements Organizer findings are the following
    Elements Organizer 13 - to be tested tomorrow.
    Elements Organizer 12 - good video and audio playback in Elements Organizer 12 player.
    Elements Organizer 11 - good video and audio playback in Elements Organizer 11 player.
    Elements Organizer 10 - good video and audio playback in Elements Organizer 10 player.
    And, no problems were found with the playback of video and audio if this file was just imported (Add Media/Files and Folders) into the Premiere Elements Editor of these versions.
    It was another story for this file and Elements Organizer on Windows 8.1 64 bit.
    Elements Organizer 13 - to be tested tomorrow.
    Elements Organizer 12, 11, and 10...no play back of video and audio - message was system does not have installed compressor/decompressor (codec)
    a. renaming of container unsuccessful - .m2ts replaced with .mp4 or .mov or .mpeg.
    b. conversion to H.264.mp4 with HandBrake was partially successful
    Elements Organizer 12 player played back video and audio for H. 264.mp4
    Elements Organizer 11 player played back video and audio but with issues for H.264.mp4
    Elements Organizer 10 player played back video and audio but with issues for H.264.mp4
    However, when these seemingly flawed H.264.mp4 were sent from the Elements Organizer to Premiere Elements Editor, they played back from the
    Timeline in the Edit mode monitor without any problems.
    And, no problems were found with the playback of video and audio if this file was just imported (Add Media/Files and Folders) into the Premiere Elements Editor of these versions.
    More tomorrow, targeting Elements Organizer 13. Comments to follow wrap up.
    ATR

  • Photoshop Elements 10 Installation issue

    Good day,
    I try to install Photoshop Elements 10 on my computer (Windows 7) but when during the loading I got an error message " HRESULT : 0x80070002".
    I do not know what to do.
    Could you please help me?
    Thank you.
    J.

    Two steps to try:
    Restart your computer and try installing again.
    If that still doesn't work, run the System File Check utility with the /scannow option:
    http://support.microsoft.com/kb/929833
    The utility will take a while, so be patient.  Even if SFC reports there were no files to repair, it really did repair files, so restart your computer.
    Ken

  • Adobe Premier Elements 10 installation failure, Mac

    Repeated attempts to install from disc produced only this report:
    WARNING: DS013: Payload {298CF0B0-8B47-46DF-B726-8E4BFAD5432E} AdobeHelp 1.0.0.0 is already installed and the session payload {EB3A47AA-B4E2-4857-A69C-92A6E097F24C} AdobeHelp 3.5.0.0 has no upgrade/conflict relationship with it.
    ERROR: DS013: Verifying payload integrity : Failed with code 1
    WARNING: DW034: Warning: {3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 will not be repaired, due to updated patch of the payload and one of the top level payload is being installed.
    WARNING: DW034: Warning: {3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 will not be repaired, due to updated patch of the payload and one of the top level payload is being installed.
    ----------- Payload: {68FE2517-2E45-4B03-8241-D0634F43878B} Smartsound1 1.0.0.0 -----------
    ERROR: DW006: Apple Package failed to install successfully.
    Adobe Creative suite CS5 is installed and kept updated.  Any ideas?

    PTony1 the summary you have posted does not really provide any actionable items.  I would recommend utilizing the Adobe Support Advisor.  It will automatically review your complete installation logs and attempt to identify a solution.

  • Adobe Premier Elements Video Editor will not open

    I just installed version 12 of Adobe Premier Elements on my Windows 7 (64) system and am unable to open Video Editor.  I receive a message that the display driver is not current and a newer version would make the program run more efficiently.  After some time, the video editor stops trying to load.  I have verified all windows updates are loaded and that I have the most current Quicktime version.  I have also unloaded and reloaded Adobe Premier Elements but this issue continues to persist.  Please assist.

    blee3874
    I suspect that this might be the immediate area to pursue
    1.     What is your video card's/chip's make and model?                        
    AMD Radeon HD 8730M, Intel Graphics HD 4000
    There have been discussions here about problems with Premiere Elements and a dual video card set up.
    http://forums.adobe.com/message/5747654
    What happens if you disable the Intel Graphics HD 4000 and just work with the AMD video card?
    This is one of John T. Smith's and Hunt's favorite subjects. So we should be hearing from them soon. Meanwhile their presence can be felt in the link that I have referenced on this subject of dual video cards.
    More later.
    ATR

  • Installation of Premier Elements 8.0.

    I have tried to install Premier Elements 8.0 ionto my Administartor account without success. I run Windows 7.0 Pro 64 bit. When the program installs it eventually "rolls back" because of error 1304....it asks to verify that I have access to Elements8.0\DigitalHome\msvcr71.dll and also DigitalHome\readme txt. Help would be much appreciated.

    May be a compatibility issue you can't get by. Try to install the MSVC runtimes manually by downloading them from Microsoft and alos run the installer in Win XP compatibility mode.
    Mylenium

  • Issues with Adobe PSE 12 and Premier Elements 12 plus DiskWarrior 4.4

    Since upgrading to the final version of OS X 10.10 Yoesemite I have issues with Adobe PSE 12 and Premier Elements 12 plus DiskWarrior 4.4. I don't recall their being any issues while I went through the Beta testing process.  The Adobe products (PSE and PE) give me a configuration message "error 16" and it tells me to uninstall and reinstall. I have done this a few times/  It seems to go through the whole install process until the startup where it crashes.  I downloaded PSE 11 and at least it starts up but I haven't used it to do anything.  Also DiskWarrior 4.4 does not load up from the hard drive anymore (error message) and when I boot it up from disk is doesn't give me the option of correcting permission when repairing files and folders.
    At lease all of otheother software including Photoshop Lightroom 5.6 seem to be working.
    Very sad

    Barbara,
    Yes, I accessed the "updates" menu from the Help pull-down menu.  I also accessed the updates using the Mac Terminal application with results shown in my original post.  Regardless of whether I used the Help menu or the Mac Terminal app, the AAM tool still responded with:
    Update Failed
       Updates could not be applied
       The error log file may help you in identifying the problem.  The, try updating again.  If the problems persist, contact customer support for further assistance.
      The error log file read as follows:
       Photoshop Camera Raw 8.5
       There was an error installing this update. Please quit and try again later. Error Code: U44M1I210
       Looking at the the output of the Mac Terminal app, it shows:
       ... hdiutil: attach failed - no mountable file systems
       Is this relevant?
    Regarding your follow-up message pointing to:
    Update 12.1 installation errors | Photoshop Elements, Premiere Elements,
    the files referenced in this link are present, are correctly named, and they are in the correct locations, so it would appear that these issues are not related to the ACR 8.5 update problem
    Thanks

Maybe you are looking for

  • How can i extract just documents from time machine backup?

    How can I extract just my documents from a time machine backup?   I had to re-install Lion after the update screwed things up, the Genius Bar guy told me to re-install each App, and then transfer just my data (documents) back but didn't tell me how. 

  • My live corners widget doesn't work, how can i fix it ?

    my live corners widget doesn't work, how can i fix it ?

  • Problem W/viewing videos on Safari

    Lately all the videos I try to view stops every few seconds and reloads. Started this about a month or so ago. Am unable to correct this. Running Mac OSX version 10.6.8 with  a 2.66 GHz Intel Core 2 Duo processor.  Any solutions?  New to Apple!

  • Do we use dllexport when no cpp file is involved?

    Hi, I test the following two .h files.  Both of them are placed in a slave dll.  The master dll includes them and use "struct A".  They both work.  So, my question is when we should be concerned about export/import.  It seems to me that we should exp

  • Vanilla BC user properties used in VBC

    I was trying to get data from a external system and display them in Siebel Energy Using Script and was sucessfull when i called the BS using "Service Name" BC user property in the VBC. When i was searching for some vanilla stuffs without scripting i